forked from Minki/linux
c267fd777a
When unloading viafb module it does not remove it's /proc/viafb/ subtree which causes multiple viafb directories to appear below proc when mobprobing viafb and also lets kernel WARN() on duplicate proc entries: [ 145.458387] WARNING: at /usr/src/linux-2.6.28-rc3-git6/fs/proc/generic.c:551 proc_register+0xe6/0x160() [ 145.458945] proc_dir_entry '/proc/viafb' already registered [ 145.459278] Modules linked in: viafb(+) i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_hda_intel snd_pcm snd_timer snd soundcore snd_page_alloc sg via_agp agpgart [last unloaded: drm] [ 145.460647] Pid: 1904, comm: modprobe Tainted: G W 2.6.28-rc3-git6 #4 [ 145.461064] Call Trace: [ 145.461248] [<c01066f1>] ? dump_stack+0x1/0x80 [ 145.461533] [<c01228a3>] warn_slowpath+0x63/0x80 [ 145.461851] [<c0253ec9>] ? idr_get_empty_slot+0xe9/0x250 [ 145.462186] [<c0254120>] ? ida_get_new_above+0xf0/0x150 [ 145.462528] [<c019fb86>] proc_register+0xe6/0x160 [ 145.462827] [<c019fdc6>] proc_mkdir_mode+0x36/0x50 [ 145.463135] [<c019fdef>] proc_mkdir+0xf/0x20 [ 145.463457] [<f807173c>] viafb_init+0x73c/0xc86 [viafb] [ 145.463823] [<f8071000>] ? viafb_init+0x0/0xc86 [viafb] [ 145.464147] [<c010111d>] do_one_initcall+0x2d/0x160 [ 145.464460] [<c01a6543>] ? sysfs_add_file+0x13/0x20 [ 145.464786] [<c015f031>] ? vfree+0x21/0x30 [ 145.465049] [<c01433b5>] ? load_module+0x1215/0x1500 [ 145.465381] [<c014e455>] ? __alloc_pages_internal+0x95/0x400 [ 145.465755] [<c0143723>] sys_init_module+0x83/0x1a0 [ 145.466065] [<c016ceed>] ? sys_read+0x3d/0x70 [ 145.466354] [<c0103bc1>] sysenter_do_call+0x12/0x25 [ 145.466653] ---[ end trace c84b37826e16748c ]--- Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2573 lines
72 KiB
C
2573 lines
72 KiB
C
/*
|
|
* Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
|
|
* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public
|
|
* License as published by the Free Software Foundation;
|
|
* either version 2, or (at your option) any later version.
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
|
|
* the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
* A PARTICULAR PURPOSE.See the GNU General Public License
|
|
* for more details.
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#define _MASTER_FILE
|
|
|
|
#include "global.h"
|
|
|
|
static int MAX_CURS = 32;
|
|
static struct fb_var_screeninfo default_var;
|
|
static char *viafb_name = "Via";
|
|
static u32 pseudo_pal[17];
|
|
|
|
/* video mode */
|
|
static char *viafb_mode = "640x480";
|
|
static char *viafb_mode1 = "640x480";
|
|
static int viafb_resMode = VIA_RES_640X480;
|
|
|
|
/* Added for specifying active devices.*/
|
|
char *viafb_active_dev = "";
|
|
|
|
/* Added for specifying video on devices.*/
|
|
char *viafb_video_dev = "";
|
|
|
|
/*Added for specify lcd output port*/
|
|
char *viafb_lcd_port = "";
|
|
char *viafb_dvi_port = "";
|
|
|
|
static void viafb_set_device(struct device_t active_dev);
|
|
static int apply_device_setting(struct viafb_ioctl_setting setting_info,
|
|
struct fb_info *info);
|
|
static void apply_second_mode_setting(struct fb_var_screeninfo
|
|
*sec_var);
|
|
static void retrieve_device_setting(struct viafb_ioctl_setting
|
|
*setting_info);
|
|
static void viafb_set_video_device(u32 video_dev_info);
|
|
static void viafb_get_video_device(u32 *video_dev_info);
|
|
|
|
/* Mode information */
|
|
static const struct viafb_modeinfo viafb_modentry[] = {
|
|
{480, 640, VIA_RES_480X640, "480x640"},
|
|
{640, 480, VIA_RES_640X480, "640x480"},
|
|
{800, 480, VIA_RES_800X480, "800x480"},
|
|
{800, 600, VIA_RES_800X600, "800x600"},
|
|
{1024, 768, VIA_RES_1024X768, "1024x768"},
|
|
{1152, 864, VIA_RES_1152X864, "1152x864"},
|
|
{1280, 1024, VIA_RES_1280X1024, "1280x1024"},
|
|
{1600, 1200, VIA_RES_1600X1200, "1600x1200"},
|
|
{1440, 1050, VIA_RES_1440X1050, "1440x1050"},
|
|
{1280, 768, VIA_RES_1280X768, "1280x768"},
|
|
{1280, 800, VIA_RES_1280X800, "1280x800"},
|
|
{1280, 960, VIA_RES_1280X960, "1280x960"},
|
|
{1920, 1440, VIA_RES_1920X1440, "1920x1440"},
|
|
{848, 480, VIA_RES_848X480, "848x480"},
|
|
{1400, 1050, VIA_RES_1400X1050, "1400x1050"},
|
|
{720, 480, VIA_RES_720X480, "720x480"},
|
|
{720, 576, VIA_RES_720X576, "720x576"},
|
|
{1024, 512, VIA_RES_1024X512, "1024x512"},
|
|
{1024, 576, VIA_RES_1024X576, "1024x576"},
|
|
{1024, 600, VIA_RES_1024X600, "1024x600"},
|
|
{1280, 720, VIA_RES_1280X720, "1280x720"},
|
|
{1920, 1080, VIA_RES_1920X1080, "1920x1080"},
|
|
{1366, 768, VIA_RES_1368X768, "1368x768"},
|
|
{1680, 1050, VIA_RES_1680X1050, "1680x1050"},
|
|
{960, 600, VIA_RES_960X600, "960x600"},
|
|
{1000, 600, VIA_RES_1000X600, "1000x600"},
|
|
{1024, 576, VIA_RES_1024X576, "1024x576"},
|
|
{1024, 600, VIA_RES_1024X600, "1024x600"},
|
|
{1088, 612, VIA_RES_1088X612, "1088x612"},
|
|
{1152, 720, VIA_RES_1152X720, "1152x720"},
|
|
{1200, 720, VIA_RES_1200X720, "1200x720"},
|
|
{1280, 600, VIA_RES_1280X600, "1280x600"},
|
|
{1360, 768, VIA_RES_1360X768, "1360x768"},
|
|
{1440, 900, VIA_RES_1440X900, "1440x900"},
|
|
{1600, 900, VIA_RES_1600X900, "1600x900"},
|
|
{1600, 1024, VIA_RES_1600X1024, "1600x1024"},
|
|
{1792, 1344, VIA_RES_1792X1344, "1792x1344"},
|
|
{1856, 1392, VIA_RES_1856X1392, "1856x1392"},
|
|
{1920, 1200, VIA_RES_1920X1200, "1920x1200"},
|
|
{2048, 1536, VIA_RES_2048X1536, "2048x1536"},
|
|
{0, 0, VIA_RES_INVALID, "640x480"}
|
|
};
|
|
|
|
static struct fb_ops viafb_ops;
|
|
|
|
static int viafb_update_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
|
|
{
|
|
struct viafb_par *ppar;
|
|
ppar = info->par;
|
|
|
|
DEBUG_MSG(KERN_INFO "viafb_update_fix!\n");
|
|
|
|
fix->visual =
|
|
ppar->bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
|
|
fix->line_length = ppar->linelength;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
|
|
struct viafb_par *viaparinfo)
|
|
{
|
|
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
|
|
strcpy(fix->id, viafb_name);
|
|
|
|
fix->smem_start = viaparinfo->fbmem;
|
|
fix->smem_len = viaparinfo->fbmem_free;
|
|
fix->mmio_start = viaparinfo->mmio_base;
|
|
fix->mmio_len = viaparinfo->mmio_len;
|
|
|
|
fix->type = FB_TYPE_PACKED_PIXELS;
|
|
fix->type_aux = 0;
|
|
|
|
fix->xpanstep = fix->ywrapstep = 0;
|
|
fix->ypanstep = 1;
|
|
|
|
/* Just tell the accel name */
|
|
viafbinfo->fix.accel = FB_ACCEL_VIA_UNICHROME;
|
|
}
|
|
static int viafb_open(struct fb_info *info, int user)
|
|
{
|
|
DEBUG_MSG(KERN_INFO "viafb_open!\n");
|
|
return 0;
|
|
}
|
|
|
|
static int viafb_release(struct fb_info *info, int user)
|
|
{
|
|
DEBUG_MSG(KERN_INFO "viafb_release!\n");
|
|
return 0;
|
|
}
|
|
|
|
static void viafb_update_viafb_par(struct fb_info *info)
|
|
{
|
|
struct viafb_par *ppar;
|
|
|
|
ppar = info->par;
|
|
ppar->bpp = info->var.bits_per_pixel;
|
|
ppar->linelength = ((info->var.xres_virtual + 7) & ~7) * ppar->bpp / 8;
|
|
ppar->hres = info->var.xres;
|
|
ppar->vres = info->var.yres;
|
|
ppar->xoffset = info->var.xoffset;
|
|
ppar->yoffset = info->var.yoffset;
|
|
}
|
|
|
|
static int viafb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
int vmode_index, htotal, vtotal;
|
|
struct viafb_par *ppar;
|
|
u32 long_refresh;
|
|
struct viafb_par *p_viafb_par;
|
|
ppar = info->par;
|
|
|
|
|
|
DEBUG_MSG(KERN_INFO "viafb_check_var!\n");
|
|
/* Sanity check */
|
|
/* HW neither support interlacte nor double-scaned mode */
|
|
if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
|
|
return -EINVAL;
|
|
|
|
vmode_index = viafb_get_mode_index(var->xres, var->yres, 0);
|
|
if (vmode_index == VIA_RES_INVALID) {
|
|
DEBUG_MSG(KERN_INFO
|
|
"viafb: Mode %dx%dx%d not supported!!\n",
|
|
var->xres, var->yres, var->bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (24 == var->bits_per_pixel)
|
|
var->bits_per_pixel = 32;
|
|
|
|
if (var->bits_per_pixel != 8 && var->bits_per_pixel != 16 &&
|
|
var->bits_per_pixel != 32)
|
|
return -EINVAL;
|
|
|
|
if ((var->xres_virtual * (var->bits_per_pixel >> 3)) & 0x1F)
|
|
/*32 pixel alignment */
|
|
var->xres_virtual = (var->xres_virtual + 31) & ~31;
|
|
if (var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8 >
|
|
ppar->memsize)
|
|
return -EINVAL;
|
|
|
|
/* Based on var passed in to calculate the refresh,
|
|
* because our driver use some modes special.
|
|
*/
|
|
htotal = var->xres + var->left_margin +
|
|
var->right_margin + var->hsync_len;
|
|
vtotal = var->yres + var->upper_margin +
|
|
var->lower_margin + var->vsync_len;
|
|
long_refresh = 1000000000UL / var->pixclock * 1000;
|
|
long_refresh /= (htotal * vtotal);
|
|
|
|
viafb_refresh = viafb_get_refresh(var->xres, var->yres, long_refresh);
|
|
|
|
/* Adjust var according to our driver's own table */
|
|
viafb_fill_var_timing_info(var, viafb_refresh, vmode_index);
|
|
|
|
/* This is indeed a patch for VT3353 */
|
|
if (!info->par)
|
|
return -1;
|
|
p_viafb_par = (struct viafb_par *)info->par;
|
|
if (p_viafb_par->chip_info->gfx_chip_name == UNICHROME_VX800)
|
|
var->accel_flags = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int viafb_set_par(struct fb_info *info)
|
|
{
|
|
int vmode_index;
|
|
int vmode_index1 = 0;
|
|
DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
|
|
|
|
viafb_update_device_setting(info->var.xres, info->var.yres,
|
|
info->var.bits_per_pixel, viafb_refresh, 0);
|
|
|
|
vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres, 0);
|
|
|
|
if (viafb_SAMM_ON == 1) {
|
|
DEBUG_MSG(KERN_INFO
|
|
"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
|
|
viafb_second_xres, viafb_second_yres, viafb_bpp1);
|
|
vmode_index1 = viafb_get_mode_index(viafb_second_xres,
|
|
viafb_second_yres, 1);
|
|
DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
|
|
vmode_index1);
|
|
|
|
viafb_update_device_setting(viafb_second_xres,
|
|
viafb_second_yres, viafb_bpp1, viafb_refresh1, 1);
|
|
}
|
|
|
|
if (vmode_index != VIA_RES_INVALID) {
|
|
viafb_setmode(vmode_index, info->var.xres, info->var.yres,
|
|
info->var.bits_per_pixel, vmode_index1,
|
|
viafb_second_xres, viafb_second_yres, viafb_bpp1);
|
|
|
|
/*We should set memory offset according virtual_x */
|
|
/*Fix me:put this function into viafb_setmode */
|
|
viafb_memory_pitch_patch(info);
|
|
|
|
/* Update ***fb_par information */
|
|
viafb_update_viafb_par(info);
|
|
|
|
/* Update other fixed information */
|
|
viafb_update_fix(&info->fix, info);
|
|
viafb_bpp = info->var.bits_per_pixel;
|
|
/* Update viafb_accel, it is necessary to our 2D accelerate */
|
|
viafb_accel = info->var.accel_flags;
|
|
|
|
if (viafb_accel)
|
|
viafb_set_2d_color_depth(info->var.bits_per_pixel);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set one color register */
|
|
static int viafb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp, struct fb_info *info)
|
|
{
|
|
u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
|
|
unsigned cmap_entries = (info->var.bits_per_pixel == 8) ? 256 : 16;
|
|
DEBUG_MSG(KERN_INFO "viafb_setcolreg!\n");
|
|
if (regno >= cmap_entries)
|
|
return 1;
|
|
if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
|
|
/*
|
|
* Read PCI bus 0,dev 0,function 0,index 0xF6 to get chip rev.
|
|
*/
|
|
outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
|
|
rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
|
|
}
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
outb(0x1A, 0x3C4);
|
|
sr1a = inb(0x3C5);
|
|
outb(0x1B, 0x3C4);
|
|
sr1b = inb(0x3C5);
|
|
outb(0x67, 0x3D4);
|
|
cr67 = inb(0x3D5);
|
|
outb(0x6A, 0x3D4);
|
|
cr6a = inb(0x3D5);
|
|
|
|
/* Map the 3C6/7/8/9 to the IGA2 */
|
|
outb(0x1A, 0x3C4);
|
|
outb(sr1a | 0x01, 0x3C5);
|
|
/* Second Display Engine colck always on */
|
|
outb(0x1B, 0x3C4);
|
|
outb(sr1b | 0x80, 0x3C5);
|
|
/* Second Display Color Depth 8 */
|
|
outb(0x67, 0x3D4);
|
|
outb(cr67 & 0x3F, 0x3D5);
|
|
outb(0x6A, 0x3D4);
|
|
/* Second Display Channel Reset CR6A[6]) */
|
|
outb(cr6a & 0xBF, 0x3D5);
|
|
/* Second Display Channel Enable CR6A[7] */
|
|
outb(cr6a | 0x80, 0x3D5);
|
|
/* Second Display Channel stop reset) */
|
|
outb(cr6a | 0x40, 0x3D5);
|
|
|
|
/* Bit mask of palette */
|
|
outb(0xFF, 0x3c6);
|
|
/* Write one register of IGA2 */
|
|
outb(regno, 0x3C8);
|
|
if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
|
|
rev >= 15) {
|
|
shift = 8;
|
|
viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
|
|
viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
|
|
} else {
|
|
shift = 10;
|
|
viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
|
|
viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
|
|
}
|
|
outb(red >> shift, 0x3C9);
|
|
outb(green >> shift, 0x3C9);
|
|
outb(blue >> shift, 0x3C9);
|
|
|
|
/* Map the 3C6/7/8/9 to the IGA1 */
|
|
outb(0x1A, 0x3C4);
|
|
outb(sr1a & 0xFE, 0x3C5);
|
|
/* Bit mask of palette */
|
|
outb(0xFF, 0x3c6);
|
|
/* Write one register of IGA1 */
|
|
outb(regno, 0x3C8);
|
|
outb(red >> shift, 0x3C9);
|
|
outb(green >> shift, 0x3C9);
|
|
outb(blue >> shift, 0x3C9);
|
|
|
|
outb(0x1A, 0x3C4);
|
|
outb(sr1a, 0x3C5);
|
|
outb(0x1B, 0x3C4);
|
|
outb(sr1b, 0x3C5);
|
|
outb(0x67, 0x3D4);
|
|
outb(cr67, 0x3D5);
|
|
outb(0x6A, 0x3D4);
|
|
outb(cr6a, 0x3D5);
|
|
break;
|
|
case 16:
|
|
((u32 *) info->pseudo_palette)[regno] = (red & 0xF800) |
|
|
((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
|
|
break;
|
|
case 32:
|
|
((u32 *) info->pseudo_palette)[regno] =
|
|
((transp & 0xFF00) << 16) |
|
|
((red & 0xFF00) << 8) |
|
|
((green & 0xFF00)) | ((blue & 0xFF00) >> 8);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*CALLED BY: fb_set_cmap */
|
|
/* fb_set_var, pass 256 colors */
|
|
/*CALLED BY: fb_set_cmap */
|
|
/* fbcon_set_palette, pass 16 colors */
|
|
static int viafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
|
|
{
|
|
u32 len = cmap->len;
|
|
u32 i;
|
|
u16 *pred = cmap->red;
|
|
u16 *pgreen = cmap->green;
|
|
u16 *pblue = cmap->blue;
|
|
u16 *ptransp = cmap->transp;
|
|
u8 sr1a, sr1b, cr67, cr6a, rev = 0, shift = 10;
|
|
if (len > 256)
|
|
return 1;
|
|
if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name) {
|
|
/*
|
|
* Read PCI bus 0, dev 0, function 0, index 0xF6 to get chip
|
|
* rev.
|
|
*/
|
|
outl(0x80000000 | (0xf6 & ~3), (unsigned long)0xCF8);
|
|
rev = (inl((unsigned long)0xCFC) >> ((0xf6 & 3) * 8)) & 0xff;
|
|
}
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
outb(0x1A, 0x3C4);
|
|
sr1a = inb(0x3C5);
|
|
outb(0x1B, 0x3C4);
|
|
sr1b = inb(0x3C5);
|
|
outb(0x67, 0x3D4);
|
|
cr67 = inb(0x3D5);
|
|
outb(0x6A, 0x3D4);
|
|
cr6a = inb(0x3D5);
|
|
/* Map the 3C6/7/8/9 to the IGA2 */
|
|
outb(0x1A, 0x3C4);
|
|
outb(sr1a | 0x01, 0x3C5);
|
|
outb(0x1B, 0x3C4);
|
|
/* Second Display Engine colck always on */
|
|
outb(sr1b | 0x80, 0x3C5);
|
|
outb(0x67, 0x3D4);
|
|
/* Second Display Color Depth 8 */
|
|
outb(cr67 & 0x3F, 0x3D5);
|
|
outb(0x6A, 0x3D4);
|
|
/* Second Display Channel Reset CR6A[6]) */
|
|
outb(cr6a & 0xBF, 0x3D5);
|
|
/* Second Display Channel Enable CR6A[7] */
|
|
outb(cr6a | 0x80, 0x3D5);
|
|
/* Second Display Channel stop reset) */
|
|
outb(cr6a | 0xC0, 0x3D5);
|
|
|
|
/* Bit mask of palette */
|
|
outb(0xFF, 0x3c6);
|
|
outb(0x00, 0x3C8);
|
|
if (UNICHROME_CLE266 == viaparinfo->chip_info->gfx_chip_name &&
|
|
rev >= 15) {
|
|
shift = 8;
|
|
viafb_write_reg_mask(CR6A, VIACR, BIT5, BIT5);
|
|
viafb_write_reg_mask(SR15, VIASR, BIT7, BIT7);
|
|
} else {
|
|
shift = 10;
|
|
viafb_write_reg_mask(CR6A, VIACR, 0, BIT5);
|
|
viafb_write_reg_mask(SR15, VIASR, 0, BIT7);
|
|
}
|
|
for (i = 0; i < len; i++) {
|
|
outb((*(pred + i)) >> shift, 0x3C9);
|
|
outb((*(pgreen + i)) >> shift, 0x3C9);
|
|
outb((*(pblue + i)) >> shift, 0x3C9);
|
|
}
|
|
|
|
outb(0x1A, 0x3C4);
|
|
/* Map the 3C6/7/8/9 to the IGA1 */
|
|
outb(sr1a & 0xFE, 0x3C5);
|
|
/* Bit mask of palette */
|
|
outb(0xFF, 0x3c6);
|
|
outb(0x00, 0x3C8);
|
|
for (i = 0; i < len; i++) {
|
|
outb((*(pred + i)) >> shift, 0x3C9);
|
|
outb((*(pgreen + i)) >> shift, 0x3C9);
|
|
outb((*(pblue + i)) >> shift, 0x3C9);
|
|
}
|
|
|
|
outb(0x1A, 0x3C4);
|
|
outb(sr1a, 0x3C5);
|
|
outb(0x1B, 0x3C4);
|
|
outb(sr1b, 0x3C5);
|
|
outb(0x67, 0x3D4);
|
|
outb(cr67, 0x3D5);
|
|
outb(0x6A, 0x3D4);
|
|
outb(cr6a, 0x3D5);
|
|
break;
|
|
case 16:
|
|
if (len > 17)
|
|
return 0; /* Because static u32 pseudo_pal[17]; */
|
|
for (i = 0; i < len; i++)
|
|
((u32 *) info->pseudo_palette)[i] =
|
|
(*(pred + i) & 0xF800) |
|
|
((*(pgreen + i) & 0xFC00) >> 5) |
|
|
((*(pblue + i) & 0xF800) >> 11);
|
|
break;
|
|
case 32:
|
|
if (len > 17)
|
|
return 0;
|
|
if (ptransp) {
|
|
for (i = 0; i < len; i++)
|
|
((u32 *) info->pseudo_palette)[i] =
|
|
((*(ptransp + i) & 0xFF00) << 16) |
|
|
((*(pred + i) & 0xFF00) << 8) |
|
|
((*(pgreen + i) & 0xFF00)) |
|
|
((*(pblue + i) & 0xFF00) >> 8);
|
|
} else {
|
|
for (i = 0; i < len; i++)
|
|
((u32 *) info->pseudo_palette)[i] =
|
|
0x00000000 |
|
|
((*(pred + i) & 0xFF00) << 8) |
|
|
((*(pgreen + i) & 0xFF00)) |
|
|
((*(pblue + i) & 0xFF00) >> 8);
|
|
}
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int viafb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
unsigned int offset;
|
|
|
|
DEBUG_MSG(KERN_INFO "viafb_pan_display!\n");
|
|
|
|
offset = (var->xoffset + (var->yoffset * var->xres_virtual)) *
|
|
var->bits_per_pixel / 16;
|
|
|
|
DEBUG_MSG(KERN_INFO "\nviafb_pan_display,offset =%d ", offset);
|
|
|
|
viafb_write_reg_mask(0x48, 0x3d4, ((offset >> 24) & 0x3), 0x3);
|
|
viafb_write_reg_mask(0x34, 0x3d4, ((offset >> 16) & 0xff), 0xff);
|
|
viafb_write_reg_mask(0x0c, 0x3d4, ((offset >> 8) & 0xff), 0xff);
|
|
viafb_write_reg_mask(0x0d, 0x3d4, (offset & 0xff), 0xff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int viafb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
DEBUG_MSG(KERN_INFO "viafb_blank!\n");
|
|
/* clear DPMS setting */
|
|
|
|
switch (blank_mode) {
|
|
case FB_BLANK_UNBLANK:
|
|
/* Screen: On, HSync: On, VSync: On */
|
|
/* control CRT monitor power management */
|
|
viafb_write_reg_mask(CR36, VIACR, 0x00, BIT4 + BIT5);
|
|
break;
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
/* Screen: Off, HSync: Off, VSync: On */
|
|
/* control CRT monitor power management */
|
|
viafb_write_reg_mask(CR36, VIACR, 0x10, BIT4 + BIT5);
|
|
break;
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
/* Screen: Off, HSync: On, VSync: Off */
|
|
/* control CRT monitor power management */
|
|
viafb_write_reg_mask(CR36, VIACR, 0x20, BIT4 + BIT5);
|
|
break;
|
|
case FB_BLANK_POWERDOWN:
|
|
/* Screen: Off, HSync: Off, VSync: Off */
|
|
/* control CRT monitor power management */
|
|
viafb_write_reg_mask(CR36, VIACR, 0x30, BIT4 + BIT5);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
|
|
{
|
|
struct viafb_ioctl_mode viamode;
|
|
struct viafb_ioctl_samm viasamm;
|
|
struct viafb_driver_version driver_version;
|
|
struct fb_var_screeninfo sec_var;
|
|
struct _panel_size_pos_info panel_pos_size_para;
|
|
u32 state_info = 0;
|
|
u32 viainfo_size = sizeof(struct viafb_ioctl_info);
|
|
u32 *viafb_gamma_table;
|
|
char driver_name[] = "viafb";
|
|
|
|
u32 __user *argp = (u32 __user *) arg;
|
|
u32 gpu32;
|
|
u32 video_dev_info = 0;
|
|
struct viafb_ioctl_setting viafb_setting = {};
|
|
struct device_t active_dev = {};
|
|
|
|
DEBUG_MSG(KERN_INFO "viafb_ioctl: 0x%X !!\n", cmd);
|
|
|
|
switch (cmd) {
|
|
case VIAFB_GET_CHIP_INFO:
|
|
if (copy_to_user(argp, viaparinfo->chip_info,
|
|
sizeof(struct chip_information)))
|
|
return -EFAULT;
|
|
break;
|
|
case VIAFB_GET_INFO_SIZE:
|
|
return put_user(viainfo_size, argp);
|
|
case VIAFB_GET_INFO:
|
|
return viafb_ioctl_get_viafb_info(arg);
|
|
case VIAFB_HOTPLUG:
|
|
return put_user(viafb_ioctl_hotplug(info->var.xres,
|
|
info->var.yres,
|
|
info->var.bits_per_pixel), argp);
|
|
case VIAFB_SET_HOTPLUG_FLAG:
|
|
if (copy_from_user(&gpu32, argp, sizeof(gpu32)))
|
|
return -EFAULT;
|
|
viafb_hotplug = (gpu32) ? 1 : 0;
|
|
break;
|
|
case VIAFB_GET_RESOLUTION:
|
|
viamode.xres = (u32) viafb_hotplug_Xres;
|
|
viamode.yres = (u32) viafb_hotplug_Yres;
|
|
viamode.refresh = (u32) viafb_hotplug_refresh;
|
|
viamode.bpp = (u32) viafb_hotplug_bpp;
|
|
if (viafb_SAMM_ON == 1) {
|
|
viamode.xres_sec = viafb_second_xres;
|
|
viamode.yres_sec = viafb_second_yres;
|
|
viamode.virtual_xres_sec = viafb_second_virtual_xres;
|
|
viamode.virtual_yres_sec = viafb_second_virtual_yres;
|
|
viamode.refresh_sec = viafb_refresh1;
|
|
viamode.bpp_sec = viafb_bpp1;
|
|
} else {
|
|
viamode.xres_sec = 0;
|
|
viamode.yres_sec = 0;
|
|
viamode.virtual_xres_sec = 0;
|
|
viamode.virtual_yres_sec = 0;
|
|
viamode.refresh_sec = 0;
|
|
viamode.bpp_sec = 0;
|
|
}
|
|
if (copy_to_user(argp, &viamode, sizeof(viamode)))
|
|
return -EFAULT;
|
|
break;
|
|
case VIAFB_GET_SAMM_INFO:
|
|
viasamm.samm_status = viafb_SAMM_ON;
|
|
|
|
if (viafb_SAMM_ON == 1) {
|
|
if (viafb_dual_fb) {
|
|
viasamm.size_prim = viaparinfo->fbmem_free;
|
|
viasamm.size_sec = viaparinfo1->fbmem_free;
|
|
} else {
|
|
if (viafb_second_size) {
|
|
viasamm.size_prim =
|
|
viaparinfo->fbmem_free -
|
|
viafb_second_size * 1024 * 1024;
|
|
viasamm.size_sec =
|
|
viafb_second_size * 1024 * 1024;
|
|
} else {
|
|
viasamm.size_prim =
|
|
viaparinfo->fbmem_free >> 1;
|
|
viasamm.size_sec =
|
|
(viaparinfo->fbmem_free >> 1);
|
|
}
|
|
}
|
|
viasamm.mem_base = viaparinfo->fbmem;
|
|
viasamm.offset_sec = viafb_second_offset;
|
|
} else {
|
|
viasamm.size_prim =
|
|
viaparinfo->memsize - viaparinfo->fbmem_used;
|
|
viasamm.size_sec = 0;
|
|
viasamm.mem_base = viaparinfo->fbmem;
|
|
viasamm.offset_sec = 0;
|
|
}
|
|
|
|
if (copy_to_user(argp, &viasamm, sizeof(viasamm)))
|
|
return -EFAULT;
|
|
|
|
break;
|
|
case VIAFB_TURN_ON_OUTPUT_DEVICE:
|
|
if (copy_from_user(&gpu32, argp, sizeof(gpu32)))
|
|
return -EFAULT;
|
|
if (gpu32 & CRT_Device)
|
|
viafb_crt_enable();
|
|
if (gpu32 & DVI_Device)
|
|
viafb_dvi_enable();
|
|
if (gpu32 & LCD_Device)
|
|
viafb_lcd_enable();
|
|
break;
|
|
case VIAFB_TURN_OFF_OUTPUT_DEVICE:
|
|
if (copy_from_user(&gpu32, argp, sizeof(gpu32)))
|
|
return -EFAULT;
|
|
if (gpu32 & CRT_Device)
|
|
viafb_crt_disable();
|
|
if (gpu32 & DVI_Device)
|
|
viafb_dvi_disable();
|
|
if (gpu32 & LCD_Device)
|
|
viafb_lcd_disable();
|
|
break;
|
|
case VIAFB_SET_DEVICE:
|
|
if (copy_from_user(&active_dev, (void *)argp,
|
|
sizeof(active_dev)))
|
|
return -EFAULT;
|
|
viafb_set_device(active_dev);
|
|
viafb_set_par(info);
|
|
break;
|
|
case VIAFB_GET_DEVICE:
|
|
active_dev.crt = viafb_CRT_ON;
|
|
active_dev.dvi = viafb_DVI_ON;
|
|
active_dev.lcd = viafb_LCD_ON;
|
|
active_dev.samm = viafb_SAMM_ON;
|
|
active_dev.primary_dev = viafb_primary_dev;
|
|
|
|
active_dev.lcd_dsp_cent = viafb_lcd_dsp_method;
|
|
active_dev.lcd_panel_id = viafb_lcd_panel_id;
|
|
active_dev.lcd_mode = viafb_lcd_mode;
|
|
|
|
active_dev.xres = viafb_hotplug_Xres;
|
|
active_dev.yres = viafb_hotplug_Yres;
|
|
|
|
active_dev.xres1 = viafb_second_xres;
|
|
active_dev.yres1 = viafb_second_yres;
|
|
|
|
active_dev.bpp = viafb_bpp;
|
|
active_dev.bpp1 = viafb_bpp1;
|
|
active_dev.refresh = viafb_refresh;
|
|
active_dev.refresh1 = viafb_refresh1;
|
|
|
|
active_dev.epia_dvi = viafb_platform_epia_dvi;
|
|
active_dev.lcd_dual_edge = viafb_device_lcd_dualedge;
|
|
active_dev.bus_width = viafb_bus_width;
|
|
|
|
if (copy_to_user(argp, &active_dev, sizeof(active_dev)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case VIAFB_GET_DRIVER_VERSION:
|
|
driver_version.iMajorNum = VERSION_MAJOR;
|
|
driver_version.iKernelNum = VERSION_KERNEL;
|
|
driver_version.iOSNum = VERSION_OS;
|
|
driver_version.iMinorNum = VERSION_MINOR;
|
|
|
|
if (copy_to_user(argp, &driver_version,
|
|
sizeof(driver_version)))
|
|
return -EFAULT;
|
|
|
|
break;
|
|
|
|
case VIAFB_SET_DEVICE_INFO:
|
|
if (copy_from_user(&viafb_setting,
|
|
argp, sizeof(viafb_setting)))
|
|
return -EFAULT;
|
|
if (apply_device_setting(viafb_setting, info) < 0)
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
case VIAFB_SET_SECOND_MODE:
|
|
if (copy_from_user(&sec_var, argp, sizeof(sec_var)))
|
|
return -EFAULT;
|
|
apply_second_mode_setting(&sec_var);
|
|
break;
|
|
|
|
case VIAFB_GET_DEVICE_INFO:
|
|
|
|
retrieve_device_setting(&viafb_setting);
|
|
|
|
if (copy_to_user(argp, &viafb_setting, sizeof(viafb_setting)))
|
|
return -EFAULT;
|
|
|
|
break;
|
|
|
|
case VIAFB_GET_DEVICE_SUPPORT:
|
|
viafb_get_device_support_state(&state_info);
|
|
if (put_user(state_info, argp))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case VIAFB_GET_DEVICE_CONNECT:
|
|
viafb_get_device_connect_state(&state_info);
|
|
if (put_user(state_info, argp))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case VIAFB_GET_PANEL_SUPPORT_EXPAND:
|
|
state_info =
|
|
viafb_lcd_get_support_expand_state(info->var.xres,
|
|
info->var.yres);
|
|
if (put_user(state_info, argp))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case VIAFB_GET_DRIVER_NAME:
|
|
if (copy_to_user(argp, driver_name, sizeof(driver_name)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case VIAFB_SET_GAMMA_LUT:
|
|
viafb_gamma_table = kmalloc(256 * sizeof(u32), GFP_KERNEL);
|
|
if (!viafb_gamma_table)
|
|
return -ENOMEM;
|
|
if (copy_from_user(viafb_gamma_table, argp,
|
|
sizeof(viafb_gamma_table))) {
|
|
kfree(viafb_gamma_table);
|
|
return -EFAULT;
|
|
}
|
|
viafb_set_gamma_table(viafb_bpp, viafb_gamma_table);
|
|
kfree(viafb_gamma_table);
|
|
break;
|
|
|
|
case VIAFB_GET_GAMMA_LUT:
|
|
viafb_gamma_table = kmalloc(256 * sizeof(u32), GFP_KERNEL);
|
|
if (!viafb_gamma_table)
|
|
return -ENOMEM;
|
|
viafb_get_gamma_table(viafb_gamma_table);
|
|
if (copy_to_user(argp, viafb_gamma_table,
|
|
sizeof(viafb_gamma_table))) {
|
|
kfree(viafb_gamma_table);
|
|
return -EFAULT;
|
|
}
|
|
kfree(viafb_gamma_table);
|
|
break;
|
|
|
|
case VIAFB_GET_GAMMA_SUPPORT_STATE:
|
|
viafb_get_gamma_support_state(viafb_bpp, &state_info);
|
|
if (put_user(state_info, argp))
|
|
return -EFAULT;
|
|
break;
|
|
case VIAFB_SET_VIDEO_DEVICE:
|
|
get_user(video_dev_info, argp);
|
|
viafb_set_video_device(video_dev_info);
|
|
break;
|
|
case VIAFB_GET_VIDEO_DEVICE:
|
|
viafb_get_video_device(&video_dev_info);
|
|
if (put_user(video_dev_info, argp))
|
|
return -EFAULT;
|
|
break;
|
|
case VIAFB_SYNC_SURFACE:
|
|
DEBUG_MSG(KERN_INFO "lobo VIAFB_SYNC_SURFACE\n");
|
|
break;
|
|
case VIAFB_GET_DRIVER_CAPS:
|
|
break;
|
|
|
|
case VIAFB_GET_PANEL_MAX_SIZE:
|
|
if (copy_from_user
|
|
(&panel_pos_size_para, argp, sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
panel_pos_size_para.x = panel_pos_size_para.y = 0;
|
|
if (copy_to_user(argp, &panel_pos_size_para,
|
|
sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
break;
|
|
case VIAFB_GET_PANEL_MAX_POSITION:
|
|
if (copy_from_user
|
|
(&panel_pos_size_para, argp, sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
panel_pos_size_para.x = panel_pos_size_para.y = 0;
|
|
if (copy_to_user(argp, &panel_pos_size_para,
|
|
sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case VIAFB_GET_PANEL_POSITION:
|
|
if (copy_from_user
|
|
(&panel_pos_size_para, argp, sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
panel_pos_size_para.x = panel_pos_size_para.y = 0;
|
|
if (copy_to_user(argp, &panel_pos_size_para,
|
|
sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
break;
|
|
case VIAFB_GET_PANEL_SIZE:
|
|
if (copy_from_user
|
|
(&panel_pos_size_para, argp, sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
panel_pos_size_para.x = panel_pos_size_para.y = 0;
|
|
if (copy_to_user(argp, &panel_pos_size_para,
|
|
sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case VIAFB_SET_PANEL_POSITION:
|
|
if (copy_from_user
|
|
(&panel_pos_size_para, argp, sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
break;
|
|
case VIAFB_SET_PANEL_SIZE:
|
|
if (copy_from_user
|
|
(&panel_pos_size_para, argp, sizeof(panel_pos_size_para)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void viafb_fillrect(struct fb_info *info,
|
|
const struct fb_fillrect *rect)
|
|
{
|
|
u32 col = 0, rop = 0;
|
|
int pitch;
|
|
|
|
if (!viafb_accel)
|
|
return cfb_fillrect(info, rect);
|
|
|
|
if (!rect->width || !rect->height)
|
|
return;
|
|
|
|
switch (rect->rop) {
|
|
case ROP_XOR:
|
|
rop = 0x5A;
|
|
break;
|
|
case ROP_COPY:
|
|
default:
|
|
rop = 0xF0;
|
|
break;
|
|
}
|
|
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
col = rect->color;
|
|
break;
|
|
case 16:
|
|
col = ((u32 *) (info->pseudo_palette))[rect->color];
|
|
break;
|
|
case 32:
|
|
col = ((u32 *) (info->pseudo_palette))[rect->color];
|
|
break;
|
|
}
|
|
|
|
/* BitBlt Source Address */
|
|
writel(0x0, viaparinfo->io_virt + VIA_REG_SRCPOS);
|
|
/* Source Base Address */
|
|
writel(0x0, viaparinfo->io_virt + VIA_REG_SRCBASE);
|
|
/* Destination Base Address */
|
|
writel(((unsigned long) (info->screen_base) -
|
|
(unsigned long) viafb_FB_MM) >> 3,
|
|
viaparinfo->io_virt + VIA_REG_DSTBASE);
|
|
/* Pitch */
|
|
pitch = (info->var.xres_virtual + 7) & ~7;
|
|
writel(VIA_PITCH_ENABLE |
|
|
(((pitch *
|
|
info->var.bits_per_pixel >> 3) >> 3) |
|
|
(((pitch * info->
|
|
var.bits_per_pixel >> 3) >> 3) << 16)),
|
|
viaparinfo->io_virt + VIA_REG_PITCH);
|
|
/* BitBlt Destination Address */
|
|
writel(((rect->dy << 16) | rect->dx),
|
|
viaparinfo->io_virt + VIA_REG_DSTPOS);
|
|
/* Dimension: width & height */
|
|
writel((((rect->height - 1) << 16) | (rect->width - 1)),
|
|
viaparinfo->io_virt + VIA_REG_DIMENSION);
|
|
/* Forground color or Destination color */
|
|
writel(col, viaparinfo->io_virt + VIA_REG_FGCOLOR);
|
|
/* GE Command */
|
|
writel((0x01 | 0x2000 | (rop << 24)),
|
|
viaparinfo->io_virt + VIA_REG_GECMD);
|
|
|
|
}
|
|
|
|
static void viafb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *area)
|
|
{
|
|
u32 dy = area->dy, sy = area->sy, direction = 0x0;
|
|
u32 sx = area->sx, dx = area->dx, width = area->width;
|
|
int pitch;
|
|
|
|
DEBUG_MSG(KERN_INFO "viafb_copyarea!!\n");
|
|
|
|
if (!viafb_accel)
|
|
return cfb_copyarea(info, area);
|
|
|
|
if (!area->width || !area->height)
|
|
return;
|
|
|
|
if (sy < dy) {
|
|
dy += area->height - 1;
|
|
sy += area->height - 1;
|
|
direction |= 0x4000;
|
|
}
|
|
|
|
if (sx < dx) {
|
|
dx += width - 1;
|
|
sx += width - 1;
|
|
direction |= 0x8000;
|
|
}
|
|
|
|
/* Source Base Address */
|
|
writel(((unsigned long) (info->screen_base) -
|
|
(unsigned long) viafb_FB_MM) >> 3,
|
|
viaparinfo->io_virt + VIA_REG_SRCBASE);
|
|
/* Destination Base Address */
|
|
writel(((unsigned long) (info->screen_base) -
|
|
(unsigned long) viafb_FB_MM) >> 3,
|
|
viaparinfo->io_virt + VIA_REG_DSTBASE);
|
|
/* Pitch */
|
|
pitch = (info->var.xres_virtual + 7) & ~7;
|
|
/* VIA_PITCH_ENABLE can be omitted now. */
|
|
writel(VIA_PITCH_ENABLE |
|
|
(((pitch *
|
|
info->var.bits_per_pixel >> 3) >> 3) | (((pitch *
|
|
info->var.
|
|
bits_per_pixel
|
|
>> 3) >> 3)
|
|
<< 16)),
|
|
viaparinfo->io_virt + VIA_REG_PITCH);
|
|
/* BitBlt Source Address */
|
|
writel(((sy << 16) | sx), viaparinfo->io_virt + VIA_REG_SRCPOS);
|
|
/* BitBlt Destination Address */
|
|
writel(((dy << 16) | dx), viaparinfo->io_virt + VIA_REG_DSTPOS);
|
|
/* Dimension: width & height */
|
|
writel((((area->height - 1) << 16) | (area->width - 1)),
|
|
viaparinfo->io_virt + VIA_REG_DIMENSION);
|
|
/* GE Command */
|
|
writel((0x01 | direction | (0xCC << 24)),
|
|
viaparinfo->io_virt + VIA_REG_GECMD);
|
|
|
|
}
|
|
|
|
static void viafb_imageblit(struct fb_info *info,
|
|
const struct fb_image *image)
|
|
{
|
|
u32 size, bg_col = 0, fg_col = 0, *udata;
|
|
int i;
|
|
int pitch;
|
|
|
|
if (!viafb_accel)
|
|
return cfb_imageblit(info, image);
|
|
|
|
udata = (u32 *) image->data;
|
|
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
bg_col = image->bg_color;
|
|
fg_col = image->fg_color;
|
|
break;
|
|
case 16:
|
|
bg_col = ((u32 *) (info->pseudo_palette))[image->bg_color];
|
|
fg_col = ((u32 *) (info->pseudo_palette))[image->fg_color];
|
|
break;
|
|
case 32:
|
|
bg_col = ((u32 *) (info->pseudo_palette))[image->bg_color];
|
|
fg_col = ((u32 *) (info->pseudo_palette))[image->fg_color];
|
|
break;
|
|
}
|
|
size = image->width * image->height;
|
|
|
|
/* Source Base Address */
|
|
writel(0x0, viaparinfo->io_virt + VIA_REG_SRCBASE);
|
|
/* Destination Base Address */
|
|
writel(((unsigned long) (info->screen_base) -
|
|
(unsigned long) viafb_FB_MM) >> 3,
|
|
viaparinfo->io_virt + VIA_REG_DSTBASE);
|
|
/* Pitch */
|
|
pitch = (info->var.xres_virtual + 7) & ~7;
|
|
writel(VIA_PITCH_ENABLE |
|
|
(((pitch *
|
|
info->var.bits_per_pixel >> 3) >> 3) | (((pitch *
|
|
info->var.
|
|
bits_per_pixel
|
|
>> 3) >> 3)
|
|
<< 16)),
|
|
viaparinfo->io_virt + VIA_REG_PITCH);
|
|
/* BitBlt Source Address */
|
|
writel(0x0, viaparinfo->io_virt + VIA_REG_SRCPOS);
|
|
/* BitBlt Destination Address */
|
|
writel(((image->dy << 16) | image->dx),
|
|
viaparinfo->io_virt + VIA_REG_DSTPOS);
|
|
/* Dimension: width & height */
|
|
writel((((image->height - 1) << 16) | (image->width - 1)),
|
|
viaparinfo->io_virt + VIA_REG_DIMENSION);
|
|
/* fb color */
|
|
writel(fg_col, viaparinfo->io_virt + VIA_REG_FGCOLOR);
|
|
/* bg color */
|
|
writel(bg_col, viaparinfo->io_virt + VIA_REG_BGCOLOR);
|
|
/* GE Command */
|
|
writel(0xCC020142, viaparinfo->io_virt + VIA_REG_GECMD);
|
|
|
|
for (i = 0; i < size / 4; i++) {
|
|
writel(*udata, viaparinfo->io_virt + VIA_MMIO_BLTBASE);
|
|
udata++;
|
|
}
|
|
|
|
}
|
|
|
|
static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
|
|
{
|
|
u8 data[CURSOR_SIZE / 8];
|
|
u32 data_bak[CURSOR_SIZE / 32];
|
|
u32 temp, xx, yy, bg_col = 0, fg_col = 0;
|
|
int size, i, j = 0;
|
|
static int hw_cursor;
|
|
struct viafb_par *p_viafb_par;
|
|
|
|
if (viafb_accel)
|
|
hw_cursor = 1;
|
|
|
|
if (!viafb_accel) {
|
|
if (hw_cursor) {
|
|
viafb_show_hw_cursor(info, HW_Cursor_OFF);
|
|
hw_cursor = 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((((struct viafb_par *)(info->par))->iga_path == IGA2)
|
|
&& (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266))
|
|
return -ENODEV;
|
|
|
|
/* When duoview and using lcd , use soft cursor */
|
|
if (viafb_LCD_ON || ((struct viafb_par *)(info->par))->duoview)
|
|
return -ENODEV;
|
|
|
|
viafb_show_hw_cursor(info, HW_Cursor_OFF);
|
|
viacursor = *cursor;
|
|
|
|
if (cursor->set & FB_CUR_SETHOT) {
|
|
viacursor.hot = cursor->hot;
|
|
temp = ((viacursor.hot.x) << 16) + viacursor.hot.y;
|
|
writel(temp, viaparinfo->io_virt + VIA_REG_CURSOR_ORG);
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETPOS) {
|
|
viacursor.image.dx = cursor->image.dx;
|
|
viacursor.image.dy = cursor->image.dy;
|
|
yy = cursor->image.dy - info->var.yoffset;
|
|
xx = cursor->image.dx - info->var.xoffset;
|
|
temp = yy & 0xFFFF;
|
|
temp |= (xx << 16);
|
|
writel(temp, viaparinfo->io_virt + VIA_REG_CURSOR_POS);
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETSIZE) {
|
|
temp = readl(viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
|
|
|
|
if ((cursor->image.width <= 32)
|
|
&& (cursor->image.height <= 32)) {
|
|
MAX_CURS = 32;
|
|
temp |= 0x2;
|
|
} else if ((cursor->image.width <= 64)
|
|
&& (cursor->image.height <= 64)) {
|
|
MAX_CURS = 64;
|
|
temp &= 0xFFFFFFFD;
|
|
} else {
|
|
DEBUG_MSG(KERN_INFO
|
|
"The cursor image is biger than 64x64 bits...\n");
|
|
return -ENXIO;
|
|
}
|
|
writel(temp, viaparinfo->io_virt + VIA_REG_CURSOR_MODE);
|
|
|
|
viacursor.image.height = cursor->image.height;
|
|
viacursor.image.width = cursor->image.width;
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETCMAP) {
|
|
viacursor.image.fg_color = cursor->image.fg_color;
|
|
viacursor.image.bg_color = cursor->image.bg_color;
|
|
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
case 16:
|
|
case 32:
|
|
bg_col =
|
|
(0xFF << 24) |
|
|
(((info->cmap.red)[viacursor.image.bg_color] &
|
|
0xFF00) << 8) |
|
|
((info->cmap.green)[viacursor.image.bg_color] &
|
|
0xFF00) |
|
|
(((info->cmap.blue)[viacursor.image.bg_color] &
|
|
0xFF00) >> 8);
|
|
fg_col =
|
|
(0xFF << 24) |
|
|
(((info->cmap.red)[viacursor.image.fg_color] &
|
|
0xFF00) << 8) |
|
|
((info->cmap.green)[viacursor.image.fg_color] &
|
|
0xFF00) |
|
|
(((info->cmap.blue)[viacursor.image.fg_color] &
|
|
0xFF00) >> 8);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
/* This is indeed a patch for VT3324/VT3353 */
|
|
if (!info->par)
|
|
return 0;
|
|
p_viafb_par = (struct viafb_par *)info->par;
|
|
|
|
if ((p_viafb_par->chip_info->gfx_chip_name ==
|
|
UNICHROME_CX700) ||
|
|
((p_viafb_par->chip_info->gfx_chip_name ==
|
|
UNICHROME_VX800))) {
|
|
bg_col =
|
|
(((info->cmap.red)[viacursor.image.bg_color] &
|
|
0xFFC0) << 14) |
|
|
(((info->cmap.green)[viacursor.image.bg_color] &
|
|
0xFFC0) << 4) |
|
|
(((info->cmap.blue)[viacursor.image.bg_color] &
|
|
0xFFC0) >> 6);
|
|
fg_col =
|
|
(((info->cmap.red)[viacursor.image.fg_color] &
|
|
0xFFC0) << 14) |
|
|
(((info->cmap.green)[viacursor.image.fg_color] &
|
|
0xFFC0) << 4) |
|
|
(((info->cmap.blue)[viacursor.image.fg_color] &
|
|
0xFFC0) >> 6);
|
|
}
|
|
|
|
writel(bg_col, viaparinfo->io_virt + VIA_REG_CURSOR_BG);
|
|
writel(fg_col, viaparinfo->io_virt + VIA_REG_CURSOR_FG);
|
|
}
|
|
|
|
if (cursor->set & FB_CUR_SETSHAPE) {
|
|
size =
|
|
((viacursor.image.width + 7) >> 3) *
|
|
viacursor.image.height;
|
|
|
|
if (MAX_CURS == 32) {
|
|
for (i = 0; i < (CURSOR_SIZE / 32); i++) {
|
|
data_bak[i] = 0x0;
|
|
data_bak[i + 1] = 0xFFFFFFFF;
|
|
i += 1;
|
|
}
|
|
} else if (MAX_CURS == 64) {
|
|
for (i = 0; i < (CURSOR_SIZE / 32); i++) {
|
|
data_bak[i] = 0x0;
|
|
data_bak[i + 1] = 0x0;
|
|
data_bak[i + 2] = 0xFFFFFFFF;
|
|
data_bak[i + 3] = 0xFFFFFFFF;
|
|
i += 3;
|
|
}
|
|
}
|
|
|
|
switch (viacursor.rop) {
|
|
case ROP_XOR:
|
|
for (i = 0; i < size; i++)
|
|
data[i] = viacursor.mask[i];
|
|
break;
|
|
case ROP_COPY:
|
|
|
|
for (i = 0; i < size; i++)
|
|
data[i] = viacursor.mask[i];
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (MAX_CURS == 32) {
|
|
for (i = 0; i < size; i++) {
|
|
data_bak[j] = (u32) data[i];
|
|
data_bak[j + 1] = ~data_bak[j];
|
|
j += 2;
|
|
}
|
|
} else if (MAX_CURS == 64) {
|
|
for (i = 0; i < size; i++) {
|
|
data_bak[j] = (u32) data[i];
|
|
data_bak[j + 1] = 0x0;
|
|
data_bak[j + 2] = ~data_bak[j];
|
|
data_bak[j + 3] = ~data_bak[j + 1];
|
|
j += 4;
|
|
}
|
|
}
|
|
|
|
memcpy(((struct viafb_par *)(info->par))->fbmem_virt +
|
|
((struct viafb_par *)(info->par))->cursor_start,
|
|
data_bak, CURSOR_SIZE);
|
|
}
|
|
|
|
if (viacursor.enable)
|
|
viafb_show_hw_cursor(info, HW_Cursor_ON);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int viafb_sync(struct fb_info *info)
|
|
{
|
|
if (viafb_accel)
|
|
viafb_wait_engine_idle();
|
|
return 0;
|
|
}
|
|
|
|
int viafb_get_mode_index(int hres, int vres, int flag)
|
|
{
|
|
u32 i;
|
|
DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
|
|
|
|
for (i = 0; viafb_modentry[i].mode_index != VIA_RES_INVALID; i++)
|
|
if (viafb_modentry[i].xres == hres &&
|
|
viafb_modentry[i].yres == vres)
|
|
break;
|
|
|
|
viafb_resMode = viafb_modentry[i].mode_index;
|
|
if (flag)
|
|
viafb_mode1 = viafb_modentry[i].mode_res;
|
|
else
|
|
viafb_mode = viafb_modentry[i].mode_res;
|
|
|
|
return viafb_resMode;
|
|
}
|
|
|
|
static void check_available_device_to_enable(int device_id)
|
|
{
|
|
int device_num = 0;
|
|
|
|
/* Initialize: */
|
|
viafb_CRT_ON = STATE_OFF;
|
|
viafb_DVI_ON = STATE_OFF;
|
|
viafb_LCD_ON = STATE_OFF;
|
|
viafb_LCD2_ON = STATE_OFF;
|
|
viafb_DeviceStatus = None_Device;
|
|
|
|
if ((device_id & CRT_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
|
|
viafb_CRT_ON = STATE_ON;
|
|
device_num++;
|
|
viafb_DeviceStatus |= CRT_Device;
|
|
}
|
|
|
|
if ((device_id & DVI_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
|
|
viafb_DVI_ON = STATE_ON;
|
|
device_num++;
|
|
viafb_DeviceStatus |= DVI_Device;
|
|
}
|
|
|
|
if ((device_id & LCD_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
|
|
viafb_LCD_ON = STATE_ON;
|
|
device_num++;
|
|
viafb_DeviceStatus |= LCD_Device;
|
|
}
|
|
|
|
if ((device_id & LCD2_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
|
|
viafb_LCD2_ON = STATE_ON;
|
|
device_num++;
|
|
viafb_DeviceStatus |= LCD2_Device;
|
|
}
|
|
|
|
if (viafb_DeviceStatus == None_Device) {
|
|
/* Use CRT as default active device: */
|
|
viafb_CRT_ON = STATE_ON;
|
|
viafb_DeviceStatus = CRT_Device;
|
|
}
|
|
DEBUG_MSG(KERN_INFO "Device Status:%x", viafb_DeviceStatus);
|
|
}
|
|
|
|
static void viafb_set_device(struct device_t active_dev)
|
|
{
|
|
/* Check available device to enable: */
|
|
int device_id = None_Device;
|
|
if (active_dev.crt)
|
|
device_id |= CRT_Device;
|
|
if (active_dev.dvi)
|
|
device_id |= DVI_Device;
|
|
if (active_dev.lcd)
|
|
device_id |= LCD_Device;
|
|
|
|
check_available_device_to_enable(device_id);
|
|
|
|
/* Check property of LCD: */
|
|
if (viafb_LCD_ON) {
|
|
if (active_dev.lcd_dsp_cent) {
|
|
viaparinfo->lvds_setting_info->display_method =
|
|
viafb_lcd_dsp_method = LCD_CENTERING;
|
|
} else {
|
|
viaparinfo->lvds_setting_info->display_method =
|
|
viafb_lcd_dsp_method = LCD_EXPANDSION;
|
|
}
|
|
|
|
if (active_dev.lcd_mode == LCD_SPWG) {
|
|
viaparinfo->lvds_setting_info->lcd_mode =
|
|
viafb_lcd_mode = LCD_SPWG;
|
|
} else {
|
|
viaparinfo->lvds_setting_info->lcd_mode =
|
|
viafb_lcd_mode = LCD_OPENLDI;
|
|
}
|
|
|
|
if (active_dev.lcd_panel_id <= LCD_PANEL_ID_MAXIMUM) {
|
|
viafb_lcd_panel_id = active_dev.lcd_panel_id;
|
|
viafb_init_lcd_size();
|
|
}
|
|
}
|
|
|
|
/* Check property of mode: */
|
|
if (!active_dev.xres1)
|
|
viafb_second_xres = 640;
|
|
else
|
|
viafb_second_xres = active_dev.xres1;
|
|
if (!active_dev.yres1)
|
|
viafb_second_yres = 480;
|
|
else
|
|
viafb_second_yres = active_dev.yres1;
|
|
if (active_dev.bpp != 0)
|
|
viafb_bpp = active_dev.bpp;
|
|
if (active_dev.bpp1 != 0)
|
|
viafb_bpp1 = active_dev.bpp1;
|
|
if (active_dev.refresh != 0)
|
|
viafb_refresh = active_dev.refresh;
|
|
if (active_dev.refresh1 != 0)
|
|
viafb_refresh1 = active_dev.refresh1;
|
|
if ((active_dev.samm == STATE_OFF) || (active_dev.samm == STATE_ON))
|
|
viafb_SAMM_ON = active_dev.samm;
|
|
viafb_primary_dev = active_dev.primary_dev;
|
|
|
|
viafb_set_start_addr();
|
|
viafb_set_iga_path();
|
|
}
|
|
|
|
static void viafb_set_video_device(u32 video_dev_info)
|
|
{
|
|
viaparinfo->video_on_crt = STATE_OFF;
|
|
viaparinfo->video_on_dvi = STATE_OFF;
|
|
viaparinfo->video_on_lcd = STATE_OFF;
|
|
|
|
/* Check available device to enable: */
|
|
if ((video_dev_info & CRT_Device) == CRT_Device)
|
|
viaparinfo->video_on_crt = STATE_ON;
|
|
else if ((video_dev_info & DVI_Device) == DVI_Device)
|
|
viaparinfo->video_on_dvi = STATE_ON;
|
|
else if ((video_dev_info & LCD_Device) == LCD_Device)
|
|
viaparinfo->video_on_lcd = STATE_ON;
|
|
}
|
|
|
|
static void viafb_get_video_device(u32 *video_dev_info)
|
|
{
|
|
*video_dev_info = None_Device;
|
|
if (viaparinfo->video_on_crt == STATE_ON)
|
|
*video_dev_info |= CRT_Device;
|
|
else if (viaparinfo->video_on_dvi == STATE_ON)
|
|
*video_dev_info |= DVI_Device;
|
|
else if (viaparinfo->video_on_lcd == STATE_ON)
|
|
*video_dev_info |= LCD_Device;
|
|
}
|
|
|
|
static int get_primary_device(void)
|
|
{
|
|
int primary_device = 0;
|
|
/* Rule: device on iga1 path are the primary device. */
|
|
if (viafb_SAMM_ON) {
|
|
if (viafb_CRT_ON) {
|
|
if (viaparinfo->crt_setting_info->iga_path == IGA1) {
|
|
DEBUG_MSG(KERN_INFO "CRT IGA Path:%d\n",
|
|
viaparinfo->
|
|
crt_setting_info->iga_path);
|
|
primary_device = CRT_Device;
|
|
}
|
|
}
|
|
if (viafb_DVI_ON) {
|
|
if (viaparinfo->tmds_setting_info->iga_path == IGA1) {
|
|
DEBUG_MSG(KERN_INFO "DVI IGA Path:%d\n",
|
|
viaparinfo->
|
|
tmds_setting_info->iga_path);
|
|
primary_device = DVI_Device;
|
|
}
|
|
}
|
|
if (viafb_LCD_ON) {
|
|
if (viaparinfo->lvds_setting_info->iga_path == IGA1) {
|
|
DEBUG_MSG(KERN_INFO "LCD IGA Path:%d\n",
|
|
viaparinfo->
|
|
lvds_setting_info->iga_path);
|
|
primary_device = LCD_Device;
|
|
}
|
|
}
|
|
if (viafb_LCD2_ON) {
|
|
if (viaparinfo->lvds_setting_info2->iga_path == IGA1) {
|
|
DEBUG_MSG(KERN_INFO "LCD2 IGA Path:%d\n",
|
|
viaparinfo->
|
|
lvds_setting_info2->iga_path);
|
|
primary_device = LCD2_Device;
|
|
}
|
|
}
|
|
}
|
|
return primary_device;
|
|
}
|
|
|
|
static u8 is_duoview(void)
|
|
{
|
|
if (0 == viafb_SAMM_ON) {
|
|
if (viafb_LCD_ON + viafb_LCD2_ON +
|
|
viafb_DVI_ON + viafb_CRT_ON == 2)
|
|
return true;
|
|
return false;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void apply_second_mode_setting(struct fb_var_screeninfo
|
|
*sec_var)
|
|
{
|
|
u32 htotal, vtotal, long_refresh;
|
|
|
|
htotal = sec_var->xres + sec_var->left_margin +
|
|
sec_var->right_margin + sec_var->hsync_len;
|
|
vtotal = sec_var->yres + sec_var->upper_margin +
|
|
sec_var->lower_margin + sec_var->vsync_len;
|
|
if ((sec_var->xres_virtual * (sec_var->bits_per_pixel >> 3)) & 0x1F) {
|
|
/*Is 32 bytes alignment? */
|
|
/*32 pixel alignment */
|
|
sec_var->xres_virtual = (sec_var->xres_virtual + 31) & ~31;
|
|
}
|
|
|
|
htotal = sec_var->xres + sec_var->left_margin +
|
|
sec_var->right_margin + sec_var->hsync_len;
|
|
vtotal = sec_var->yres + sec_var->upper_margin +
|
|
sec_var->lower_margin + sec_var->vsync_len;
|
|
long_refresh = 1000000000UL / sec_var->pixclock * 1000;
|
|
long_refresh /= (htotal * vtotal);
|
|
|
|
viafb_second_xres = sec_var->xres;
|
|
viafb_second_yres = sec_var->yres;
|
|
viafb_second_virtual_xres = sec_var->xres_virtual;
|
|
viafb_second_virtual_yres = sec_var->yres_virtual;
|
|
viafb_bpp1 = sec_var->bits_per_pixel;
|
|
viafb_refresh1 = viafb_get_refresh(sec_var->xres, sec_var->yres,
|
|
long_refresh);
|
|
}
|
|
|
|
static int apply_device_setting(struct viafb_ioctl_setting setting_info,
|
|
struct fb_info *info)
|
|
{
|
|
int need_set_mode = 0;
|
|
DEBUG_MSG(KERN_INFO "apply_device_setting\n");
|
|
|
|
if (setting_info.device_flag) {
|
|
need_set_mode = 1;
|
|
check_available_device_to_enable(setting_info.device_status);
|
|
}
|
|
|
|
/* Unlock LCD's operation according to LCD flag
|
|
and check if the setting value is valid. */
|
|
/* If the value is valid, apply the new setting value to the device. */
|
|
if (viafb_LCD_ON) {
|
|
if (setting_info.lcd_operation_flag & OP_LCD_CENTERING) {
|
|
need_set_mode = 1;
|
|
if (setting_info.lcd_attributes.display_center) {
|
|
/* Centering */
|
|
viaparinfo->lvds_setting_info->display_method =
|
|
LCD_CENTERING;
|
|
viafb_lcd_dsp_method = LCD_CENTERING;
|
|
viaparinfo->lvds_setting_info2->display_method =
|
|
viafb_lcd_dsp_method = LCD_CENTERING;
|
|
} else {
|
|
/* expandsion */
|
|
viaparinfo->lvds_setting_info->display_method =
|
|
LCD_EXPANDSION;
|
|
viafb_lcd_dsp_method = LCD_EXPANDSION;
|
|
viaparinfo->lvds_setting_info2->display_method =
|
|
LCD_EXPANDSION;
|
|
viafb_lcd_dsp_method = LCD_EXPANDSION;
|
|
}
|
|
}
|
|
|
|
if (setting_info.lcd_operation_flag & OP_LCD_MODE) {
|
|
need_set_mode = 1;
|
|
if (setting_info.lcd_attributes.lcd_mode ==
|
|
LCD_SPWG) {
|
|
viaparinfo->lvds_setting_info->lcd_mode =
|
|
viafb_lcd_mode = LCD_SPWG;
|
|
} else {
|
|
viaparinfo->lvds_setting_info->lcd_mode =
|
|
viafb_lcd_mode = LCD_OPENLDI;
|
|
}
|
|
viaparinfo->lvds_setting_info2->lcd_mode =
|
|
viaparinfo->lvds_setting_info->lcd_mode;
|
|
}
|
|
|
|
if (setting_info.lcd_operation_flag & OP_LCD_PANEL_ID) {
|
|
need_set_mode = 1;
|
|
if (setting_info.lcd_attributes.panel_id <=
|
|
LCD_PANEL_ID_MAXIMUM) {
|
|
viafb_lcd_panel_id =
|
|
setting_info.lcd_attributes.panel_id;
|
|
viafb_init_lcd_size();
|
|
}
|
|
}
|
|
}
|
|
|
|
if (0 != (setting_info.samm_status & OP_SAMM)) {
|
|
setting_info.samm_status =
|
|
setting_info.samm_status & (~OP_SAMM);
|
|
if (setting_info.samm_status == 0
|
|
|| setting_info.samm_status == 1) {
|
|
viafb_SAMM_ON = setting_info.samm_status;
|
|
|
|
if (viafb_SAMM_ON)
|
|
viafb_primary_dev = setting_info.primary_device;
|
|
|
|
viafb_set_start_addr();
|
|
viafb_set_iga_path();
|
|
}
|
|
need_set_mode = 1;
|
|
}
|
|
|
|
viaparinfo->duoview = is_duoview();
|
|
|
|
if (!need_set_mode) {
|
|
;
|
|
} else {
|
|
viafb_set_iga_path();
|
|
viafb_set_par(info);
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static void retrieve_device_setting(struct viafb_ioctl_setting
|
|
*setting_info)
|
|
{
|
|
|
|
/* get device status */
|
|
if (viafb_CRT_ON == 1)
|
|
setting_info->device_status = CRT_Device;
|
|
if (viafb_DVI_ON == 1)
|
|
setting_info->device_status |= DVI_Device;
|
|
if (viafb_LCD_ON == 1)
|
|
setting_info->device_status |= LCD_Device;
|
|
if (viafb_LCD2_ON == 1)
|
|
setting_info->device_status |= LCD2_Device;
|
|
if ((viaparinfo->video_on_crt == 1) && (viafb_CRT_ON == 1)) {
|
|
setting_info->video_device_status =
|
|
viaparinfo->crt_setting_info->iga_path;
|
|
} else if ((viaparinfo->video_on_dvi == 1) && (viafb_DVI_ON == 1)) {
|
|
setting_info->video_device_status =
|
|
viaparinfo->tmds_setting_info->iga_path;
|
|
} else if ((viaparinfo->video_on_lcd == 1) && (viafb_LCD_ON == 1)) {
|
|
setting_info->video_device_status =
|
|
viaparinfo->lvds_setting_info->iga_path;
|
|
} else {
|
|
setting_info->video_device_status = 0;
|
|
}
|
|
|
|
setting_info->samm_status = viafb_SAMM_ON;
|
|
setting_info->primary_device = get_primary_device();
|
|
|
|
setting_info->first_dev_bpp = viafb_bpp;
|
|
setting_info->second_dev_bpp = viafb_bpp1;
|
|
|
|
setting_info->first_dev_refresh = viafb_refresh;
|
|
setting_info->second_dev_refresh = viafb_refresh1;
|
|
|
|
setting_info->first_dev_hor_res = viafb_hotplug_Xres;
|
|
setting_info->first_dev_ver_res = viafb_hotplug_Yres;
|
|
setting_info->second_dev_hor_res = viafb_second_xres;
|
|
setting_info->second_dev_ver_res = viafb_second_yres;
|
|
|
|
/* Get lcd attributes */
|
|
setting_info->lcd_attributes.display_center = viafb_lcd_dsp_method;
|
|
setting_info->lcd_attributes.panel_id = viafb_lcd_panel_id;
|
|
setting_info->lcd_attributes.lcd_mode = viafb_lcd_mode;
|
|
}
|
|
|
|
static void parse_active_dev(void)
|
|
{
|
|
viafb_CRT_ON = STATE_OFF;
|
|
viafb_DVI_ON = STATE_OFF;
|
|
viafb_LCD_ON = STATE_OFF;
|
|
viafb_LCD2_ON = STATE_OFF;
|
|
/* 1. Modify the active status of devices. */
|
|
/* 2. Keep the order of devices, so we can set corresponding
|
|
IGA path to devices in SAMM case. */
|
|
/* Note: The previous of active_dev is primary device,
|
|
and the following is secondary device. */
|
|
if (!strncmp(viafb_active_dev, "CRT+DVI", 7)) {
|
|
/* CRT+DVI */
|
|
viafb_CRT_ON = STATE_ON;
|
|
viafb_DVI_ON = STATE_ON;
|
|
viafb_primary_dev = CRT_Device;
|
|
} else if (!strncmp(viafb_active_dev, "DVI+CRT", 7)) {
|
|
/* DVI+CRT */
|
|
viafb_CRT_ON = STATE_ON;
|
|
viafb_DVI_ON = STATE_ON;
|
|
viafb_primary_dev = DVI_Device;
|
|
} else if (!strncmp(viafb_active_dev, "CRT+LCD", 7)) {
|
|
/* CRT+LCD */
|
|
viafb_CRT_ON = STATE_ON;
|
|
viafb_LCD_ON = STATE_ON;
|
|
viafb_primary_dev = CRT_Device;
|
|
} else if (!strncmp(viafb_active_dev, "LCD+CRT", 7)) {
|
|
/* LCD+CRT */
|
|
viafb_CRT_ON = STATE_ON;
|
|
viafb_LCD_ON = STATE_ON;
|
|
viafb_primary_dev = LCD_Device;
|
|
} else if (!strncmp(viafb_active_dev, "DVI+LCD", 7)) {
|
|
/* DVI+LCD */
|
|
viafb_DVI_ON = STATE_ON;
|
|
viafb_LCD_ON = STATE_ON;
|
|
viafb_primary_dev = DVI_Device;
|
|
} else if (!strncmp(viafb_active_dev, "LCD+DVI", 7)) {
|
|
/* LCD+DVI */
|
|
viafb_DVI_ON = STATE_ON;
|
|
viafb_LCD_ON = STATE_ON;
|
|
viafb_primary_dev = LCD_Device;
|
|
} else if (!strncmp(viafb_active_dev, "LCD+LCD2", 8)) {
|
|
viafb_LCD_ON = STATE_ON;
|
|
viafb_LCD2_ON = STATE_ON;
|
|
viafb_primary_dev = LCD_Device;
|
|
} else if (!strncmp(viafb_active_dev, "LCD2+LCD", 8)) {
|
|
viafb_LCD_ON = STATE_ON;
|
|
viafb_LCD2_ON = STATE_ON;
|
|
viafb_primary_dev = LCD2_Device;
|
|
} else if (!strncmp(viafb_active_dev, "CRT", 3)) {
|
|
/* CRT only */
|
|
viafb_CRT_ON = STATE_ON;
|
|
viafb_SAMM_ON = STATE_OFF;
|
|
} else if (!strncmp(viafb_active_dev, "DVI", 3)) {
|
|
/* DVI only */
|
|
viafb_DVI_ON = STATE_ON;
|
|
viafb_SAMM_ON = STATE_OFF;
|
|
} else if (!strncmp(viafb_active_dev, "LCD", 3)) {
|
|
/* LCD only */
|
|
viafb_LCD_ON = STATE_ON;
|
|
viafb_SAMM_ON = STATE_OFF;
|
|
} else {
|
|
viafb_CRT_ON = STATE_ON;
|
|
viafb_SAMM_ON = STATE_OFF;
|
|
}
|
|
viaparinfo->duoview = is_duoview();
|
|
}
|
|
|
|
static void parse_video_dev(void)
|
|
{
|
|
viaparinfo->video_on_crt = STATE_OFF;
|
|
viaparinfo->video_on_dvi = STATE_OFF;
|
|
viaparinfo->video_on_lcd = STATE_OFF;
|
|
|
|
if (!strncmp(viafb_video_dev, "CRT", 3)) {
|
|
/* Video on CRT */
|
|
viaparinfo->video_on_crt = STATE_ON;
|
|
} else if (!strncmp(viafb_video_dev, "DVI", 3)) {
|
|
/* Video on DVI */
|
|
viaparinfo->video_on_dvi = STATE_ON;
|
|
} else if (!strncmp(viafb_video_dev, "LCD", 3)) {
|
|
/* Video on LCD */
|
|
viaparinfo->video_on_lcd = STATE_ON;
|
|
}
|
|
}
|
|
|
|
static int parse_port(char *opt_str, int *output_interface)
|
|
{
|
|
if (!strncmp(opt_str, "DVP0", 4))
|
|
*output_interface = INTERFACE_DVP0;
|
|
else if (!strncmp(opt_str, "DVP1", 4))
|
|
*output_interface = INTERFACE_DVP1;
|
|
else if (!strncmp(opt_str, "DFP_HIGHLOW", 11))
|
|
*output_interface = INTERFACE_DFP;
|
|
else if (!strncmp(opt_str, "DFP_HIGH", 8))
|
|
*output_interface = INTERFACE_DFP_HIGH;
|
|
else if (!strncmp(opt_str, "DFP_LOW", 7))
|
|
*output_interface = INTERFACE_DFP_LOW;
|
|
else
|
|
*output_interface = INTERFACE_NONE;
|
|
return 0;
|
|
}
|
|
|
|
static void parse_lcd_port(void)
|
|
{
|
|
parse_port(viafb_lcd_port, &viaparinfo->chip_info->lvds_chip_info.
|
|
output_interface);
|
|
/*Initialize to avoid unexpected behavior */
|
|
viaparinfo->chip_info->lvds_chip_info2.output_interface =
|
|
INTERFACE_NONE;
|
|
|
|
DEBUG_MSG(KERN_INFO "parse_lcd_port: viafb_lcd_port:%s,interface:%d\n",
|
|
viafb_lcd_port, viaparinfo->chip_info->lvds_chip_info.
|
|
output_interface);
|
|
}
|
|
|
|
static void parse_dvi_port(void)
|
|
{
|
|
parse_port(viafb_dvi_port, &viaparinfo->chip_info->tmds_chip_info.
|
|
output_interface);
|
|
|
|
DEBUG_MSG(KERN_INFO "parse_dvi_port: viafb_dvi_port:%s,interface:%d\n",
|
|
viafb_dvi_port, viaparinfo->chip_info->tmds_chip_info.
|
|
output_interface);
|
|
}
|
|
|
|
/*
|
|
* The proc filesystem read/write function, a simple proc implement to
|
|
* get/set the value of DPA DVP0, DVP0DataDriving, DVP0ClockDriving, DVP1,
|
|
* DVP1Driving, DFPHigh, DFPLow CR96, SR2A[5], SR1B[1], SR2A[4], SR1E[2],
|
|
* CR9B, SR65, CR97, CR99
|
|
*/
|
|
static int viafb_dvp0_proc_read(char *buf, char **start, off_t offset,
|
|
int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
u8 dvp0_data_dri = 0, dvp0_clk_dri = 0, dvp0 = 0;
|
|
dvp0_data_dri =
|
|
(viafb_read_reg(VIASR, SR2A) & BIT5) >> 4 |
|
|
(viafb_read_reg(VIASR, SR1B) & BIT1) >> 1;
|
|
dvp0_clk_dri =
|
|
(viafb_read_reg(VIASR, SR2A) & BIT4) >> 3 |
|
|
(viafb_read_reg(VIASR, SR1E) & BIT2) >> 2;
|
|
dvp0 = viafb_read_reg(VIACR, CR96) & 0x0f;
|
|
len +=
|
|
sprintf(buf + len, "%x %x %x\n", dvp0, dvp0_data_dri, dvp0_clk_dri);
|
|
*eof = 1; /*Inform kernel end of data */
|
|
return len;
|
|
}
|
|
static int viafb_dvp0_proc_write(struct file *file,
|
|
const char __user *buffer, unsigned long count, void *data)
|
|
{
|
|
char buf[20], *value, *pbuf;
|
|
u8 reg_val = 0;
|
|
unsigned long length, i;
|
|
if (count < 1)
|
|
return -EINVAL;
|
|
length = count > 20 ? 20 : count;
|
|
if (copy_from_user(&buf[0], buffer, length))
|
|
return -EFAULT;
|
|
buf[length - 1] = '\0'; /*Ensure end string */
|
|
pbuf = &buf[0];
|
|
for (i = 0; i < 3; i++) {
|
|
value = strsep(&pbuf, " ");
|
|
if (value != NULL) {
|
|
strict_strtoul(value, 0, (unsigned long *)®_val);
|
|
DEBUG_MSG(KERN_INFO "DVP0:reg_val[%l]=:%x\n", i,
|
|
reg_val);
|
|
switch (i) {
|
|
case 0:
|
|
viafb_write_reg_mask(CR96, VIACR,
|
|
reg_val, 0x0f);
|
|
break;
|
|
case 1:
|
|
viafb_write_reg_mask(SR2A, VIASR,
|
|
reg_val << 4, BIT5);
|
|
viafb_write_reg_mask(SR1B, VIASR,
|
|
reg_val << 1, BIT1);
|
|
break;
|
|
case 2:
|
|
viafb_write_reg_mask(SR2A, VIASR,
|
|
reg_val << 3, BIT4);
|
|
viafb_write_reg_mask(SR1E, VIASR,
|
|
reg_val << 2, BIT2);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
return count;
|
|
}
|
|
static int viafb_dvp1_proc_read(char *buf, char **start, off_t offset,
|
|
int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
u8 dvp1 = 0, dvp1_data_dri = 0, dvp1_clk_dri = 0;
|
|
dvp1 = viafb_read_reg(VIACR, CR9B) & 0x0f;
|
|
dvp1_data_dri = (viafb_read_reg(VIASR, SR65) & 0x0c) >> 2;
|
|
dvp1_clk_dri = viafb_read_reg(VIASR, SR65) & 0x03;
|
|
len +=
|
|
sprintf(buf + len, "%x %x %x\n", dvp1, dvp1_data_dri, dvp1_clk_dri);
|
|
*eof = 1; /*Inform kernel end of data */
|
|
return len;
|
|
}
|
|
static int viafb_dvp1_proc_write(struct file *file,
|
|
const char __user *buffer, unsigned long count, void *data)
|
|
{
|
|
char buf[20], *value, *pbuf;
|
|
u8 reg_val = 0;
|
|
unsigned long length, i;
|
|
if (count < 1)
|
|
return -EINVAL;
|
|
length = count > 20 ? 20 : count;
|
|
if (copy_from_user(&buf[0], buffer, length))
|
|
return -EFAULT;
|
|
buf[length - 1] = '\0'; /*Ensure end string */
|
|
pbuf = &buf[0];
|
|
for (i = 0; i < 3; i++) {
|
|
value = strsep(&pbuf, " ");
|
|
if (value != NULL) {
|
|
strict_strtoul(value, 0, (unsigned long *)®_val);
|
|
switch (i) {
|
|
case 0:
|
|
viafb_write_reg_mask(CR9B, VIACR,
|
|
reg_val, 0x0f);
|
|
break;
|
|
case 1:
|
|
viafb_write_reg_mask(SR65, VIASR,
|
|
reg_val << 2, 0x0c);
|
|
break;
|
|
case 2:
|
|
viafb_write_reg_mask(SR65, VIASR,
|
|
reg_val, 0x03);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static int viafb_dfph_proc_read(char *buf, char **start, off_t offset,
|
|
int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
u8 dfp_high = 0;
|
|
dfp_high = viafb_read_reg(VIACR, CR97) & 0x0f;
|
|
len += sprintf(buf + len, "%x\n", dfp_high);
|
|
*eof = 1; /*Inform kernel end of data */
|
|
return len;
|
|
}
|
|
static int viafb_dfph_proc_write(struct file *file,
|
|
const char __user *buffer, unsigned long count, void *data)
|
|
{
|
|
char buf[20];
|
|
u8 reg_val = 0;
|
|
unsigned long length;
|
|
if (count < 1)
|
|
return -EINVAL;
|
|
length = count > 20 ? 20 : count;
|
|
if (copy_from_user(&buf[0], buffer, length))
|
|
return -EFAULT;
|
|
buf[length - 1] = '\0'; /*Ensure end string */
|
|
strict_strtoul(&buf[0], 0, (unsigned long *)®_val);
|
|
viafb_write_reg_mask(CR97, VIACR, reg_val, 0x0f);
|
|
return count;
|
|
}
|
|
static int viafb_dfpl_proc_read(char *buf, char **start, off_t offset,
|
|
int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
u8 dfp_low = 0;
|
|
dfp_low = viafb_read_reg(VIACR, CR99) & 0x0f;
|
|
len += sprintf(buf + len, "%x\n", dfp_low);
|
|
*eof = 1; /*Inform kernel end of data */
|
|
return len;
|
|
}
|
|
static int viafb_dfpl_proc_write(struct file *file,
|
|
const char __user *buffer, unsigned long count, void *data)
|
|
{
|
|
char buf[20];
|
|
u8 reg_val = 0;
|
|
unsigned long length;
|
|
if (count < 1)
|
|
return -EINVAL;
|
|
length = count > 20 ? 20 : count;
|
|
if (copy_from_user(&buf[0], buffer, length))
|
|
return -EFAULT;
|
|
buf[length - 1] = '\0'; /*Ensure end string */
|
|
strict_strtoul(&buf[0], 0, (unsigned long *)®_val);
|
|
viafb_write_reg_mask(CR99, VIACR, reg_val, 0x0f);
|
|
return count;
|
|
}
|
|
static int viafb_vt1636_proc_read(char *buf, char **start,
|
|
off_t offset, int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
u8 vt1636_08 = 0, vt1636_09 = 0;
|
|
switch (viaparinfo->chip_info->lvds_chip_info.lvds_chip_name) {
|
|
case VT1636_LVDS:
|
|
vt1636_08 =
|
|
viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info,
|
|
&viaparinfo->chip_info->lvds_chip_info, 0x08) & 0x0f;
|
|
vt1636_09 =
|
|
viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info,
|
|
&viaparinfo->chip_info->lvds_chip_info, 0x09) & 0x1f;
|
|
len += sprintf(buf + len, "%x %x\n", vt1636_08, vt1636_09);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
switch (viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) {
|
|
case VT1636_LVDS:
|
|
vt1636_08 =
|
|
viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info2,
|
|
&viaparinfo->chip_info->lvds_chip_info2, 0x08) & 0x0f;
|
|
vt1636_09 =
|
|
viafb_gpio_i2c_read_lvds(viaparinfo->lvds_setting_info2,
|
|
&viaparinfo->chip_info->lvds_chip_info2, 0x09) & 0x1f;
|
|
len += sprintf(buf + len, " %x %x\n", vt1636_08, vt1636_09);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
*eof = 1; /*Inform kernel end of data */
|
|
return len;
|
|
}
|
|
static int viafb_vt1636_proc_write(struct file *file,
|
|
const char __user *buffer, unsigned long count, void *data)
|
|
{
|
|
char buf[30], *value, *pbuf;
|
|
struct IODATA reg_val;
|
|
unsigned long length, i;
|
|
if (count < 1)
|
|
return -EINVAL;
|
|
length = count > 30 ? 30 : count;
|
|
if (copy_from_user(&buf[0], buffer, length))
|
|
return -EFAULT;
|
|
buf[length - 1] = '\0'; /*Ensure end string */
|
|
pbuf = &buf[0];
|
|
switch (viaparinfo->chip_info->lvds_chip_info.lvds_chip_name) {
|
|
case VT1636_LVDS:
|
|
for (i = 0; i < 2; i++) {
|
|
value = strsep(&pbuf, " ");
|
|
if (value != NULL) {
|
|
strict_strtoul(value, 0,
|
|
(unsigned long *)®_val.Data);
|
|
switch (i) {
|
|
case 0:
|
|
reg_val.Index = 0x08;
|
|
reg_val.Mask = 0x0f;
|
|
viafb_gpio_i2c_write_mask_lvds
|
|
(viaparinfo->lvds_setting_info,
|
|
&viaparinfo->
|
|
chip_info->lvds_chip_info,
|
|
reg_val);
|
|
break;
|
|
case 1:
|
|
reg_val.Index = 0x09;
|
|
reg_val.Mask = 0x1f;
|
|
viafb_gpio_i2c_write_mask_lvds
|
|
(viaparinfo->lvds_setting_info,
|
|
&viaparinfo->
|
|
chip_info->lvds_chip_info,
|
|
reg_val);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
switch (viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) {
|
|
case VT1636_LVDS:
|
|
for (i = 0; i < 2; i++) {
|
|
value = strsep(&pbuf, " ");
|
|
if (value != NULL) {
|
|
strict_strtoul(value, 0,
|
|
(unsigned long *)®_val.Data);
|
|
switch (i) {
|
|
case 0:
|
|
reg_val.Index = 0x08;
|
|
reg_val.Mask = 0x0f;
|
|
viafb_gpio_i2c_write_mask_lvds
|
|
(viaparinfo->lvds_setting_info2,
|
|
&viaparinfo->
|
|
chip_info->lvds_chip_info2,
|
|
reg_val);
|
|
break;
|
|
case 1:
|
|
reg_val.Index = 0x09;
|
|
reg_val.Mask = 0x1f;
|
|
viafb_gpio_i2c_write_mask_lvds
|
|
(viaparinfo->lvds_setting_info2,
|
|
&viaparinfo->
|
|
chip_info->lvds_chip_info2,
|
|
reg_val);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static void viafb_init_proc(struct proc_dir_entry **viafb_entry)
|
|
{
|
|
struct proc_dir_entry *entry;
|
|
*viafb_entry = proc_mkdir("viafb", NULL);
|
|
if (viafb_entry) {
|
|
entry = create_proc_entry("dvp0", 0, *viafb_entry);
|
|
if (entry) {
|
|
entry->owner = THIS_MODULE;
|
|
entry->read_proc = viafb_dvp0_proc_read;
|
|
entry->write_proc = viafb_dvp0_proc_write;
|
|
}
|
|
entry = create_proc_entry("dvp1", 0, *viafb_entry);
|
|
if (entry) {
|
|
entry->owner = THIS_MODULE;
|
|
entry->read_proc = viafb_dvp1_proc_read;
|
|
entry->write_proc = viafb_dvp1_proc_write;
|
|
}
|
|
entry = create_proc_entry("dfph", 0, *viafb_entry);
|
|
if (entry) {
|
|
entry->owner = THIS_MODULE;
|
|
entry->read_proc = viafb_dfph_proc_read;
|
|
entry->write_proc = viafb_dfph_proc_write;
|
|
}
|
|
entry = create_proc_entry("dfpl", 0, *viafb_entry);
|
|
if (entry) {
|
|
entry->owner = THIS_MODULE;
|
|
entry->read_proc = viafb_dfpl_proc_read;
|
|
entry->write_proc = viafb_dfpl_proc_write;
|
|
}
|
|
if (VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info.
|
|
lvds_chip_name || VT1636_LVDS ==
|
|
viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) {
|
|
entry = create_proc_entry("vt1636", 0, *viafb_entry);
|
|
if (entry) {
|
|
entry->owner = THIS_MODULE;
|
|
entry->read_proc = viafb_vt1636_proc_read;
|
|
entry->write_proc = viafb_vt1636_proc_write;
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
|
|
{
|
|
/* no problem if it was not registered */
|
|
remove_proc_entry("dvp0", viafb_entry);/* parent dir */
|
|
remove_proc_entry("dvp1", viafb_entry);
|
|
remove_proc_entry("dfph", viafb_entry);
|
|
remove_proc_entry("dfpl", viafb_entry);
|
|
remove_proc_entry("vt1636", viafb_entry);
|
|
remove_proc_entry("vt1625", viafb_entry);
|
|
remove_proc_entry("viafb", NULL);
|
|
}
|
|
|
|
static int __devinit via_pci_probe(void)
|
|
{
|
|
unsigned int default_xres, default_yres;
|
|
char *tmpc, *tmpm;
|
|
char *tmpc_sec, *tmpm_sec;
|
|
int vmode_index;
|
|
u32 tmds_length, lvds_length, crt_length, chip_length, viafb_par_length;
|
|
|
|
DEBUG_MSG(KERN_INFO "VIAFB PCI Probe!!\n");
|
|
|
|
viafb_par_length = ALIGN(sizeof(struct viafb_par), BITS_PER_LONG/8);
|
|
tmds_length = ALIGN(sizeof(struct tmds_setting_information),
|
|
BITS_PER_LONG/8);
|
|
lvds_length = ALIGN(sizeof(struct lvds_setting_information),
|
|
BITS_PER_LONG/8);
|
|
crt_length = ALIGN(sizeof(struct lvds_setting_information),
|
|
BITS_PER_LONG/8);
|
|
chip_length = ALIGN(sizeof(struct chip_information), BITS_PER_LONG/8);
|
|
|
|
/* Allocate fb_info and ***_par here, also including some other needed
|
|
* variables
|
|
*/
|
|
viafbinfo = framebuffer_alloc(viafb_par_length + 2 * lvds_length +
|
|
tmds_length + crt_length + chip_length, NULL);
|
|
if (!viafbinfo) {
|
|
printk(KERN_ERR"Could not allocate memory for viafb_info.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
viaparinfo = (struct viafb_par *)viafbinfo->par;
|
|
viaparinfo->tmds_setting_info = (struct tmds_setting_information *)
|
|
((unsigned long)viaparinfo + viafb_par_length);
|
|
viaparinfo->lvds_setting_info = (struct lvds_setting_information *)
|
|
((unsigned long)viaparinfo->tmds_setting_info + tmds_length);
|
|
viaparinfo->lvds_setting_info2 = (struct lvds_setting_information *)
|
|
((unsigned long)viaparinfo->lvds_setting_info + lvds_length);
|
|
viaparinfo->crt_setting_info = (struct crt_setting_information *)
|
|
((unsigned long)viaparinfo->lvds_setting_info2 + lvds_length);
|
|
viaparinfo->chip_info = (struct chip_information *)
|
|
((unsigned long)viaparinfo->crt_setting_info + crt_length);
|
|
|
|
if (viafb_dual_fb)
|
|
viafb_SAMM_ON = 1;
|
|
parse_active_dev();
|
|
parse_video_dev();
|
|
parse_lcd_port();
|
|
parse_dvi_port();
|
|
|
|
/* for dual-fb must viafb_SAMM_ON=1 and viafb_dual_fb=1 */
|
|
if (!viafb_SAMM_ON)
|
|
viafb_dual_fb = 0;
|
|
|
|
/* Set up I2C bus stuff */
|
|
viafb_create_i2c_bus(viaparinfo);
|
|
|
|
viafb_init_chip_info();
|
|
viafb_get_fb_info(&viaparinfo->fbmem, &viaparinfo->memsize);
|
|
viaparinfo->fbmem_free = viaparinfo->memsize;
|
|
viaparinfo->fbmem_used = 0;
|
|
viaparinfo->fbmem_virt = ioremap_nocache(viaparinfo->fbmem,
|
|
viaparinfo->memsize);
|
|
viafbinfo->screen_base = (char *)viaparinfo->fbmem_virt;
|
|
|
|
if (!viaparinfo->fbmem_virt) {
|
|
printk(KERN_INFO "ioremap failed\n");
|
|
return -1;
|
|
}
|
|
|
|
viafb_get_mmio_info(&viaparinfo->mmio_base, &viaparinfo->mmio_len);
|
|
viaparinfo->io_virt = ioremap_nocache(viaparinfo->mmio_base,
|
|
viaparinfo->mmio_len);
|
|
|
|
viafbinfo->node = 0;
|
|
viafbinfo->fbops = &viafb_ops;
|
|
viafbinfo->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
|
|
viafbinfo->pseudo_palette = pseudo_pal;
|
|
if (viafb_accel) {
|
|
viafb_init_accel();
|
|
viafb_init_2d_engine();
|
|
viafb_hw_cursor_init();
|
|
}
|
|
|
|
if (viafb_second_size && (viafb_second_size < 8)) {
|
|
viafb_second_offset = viaparinfo->fbmem_free -
|
|
viafb_second_size * 1024 * 1024;
|
|
} else {
|
|
viafb_second_size = 8;
|
|
viafb_second_offset = viaparinfo->fbmem_free -
|
|
viafb_second_size * 1024 * 1024;
|
|
}
|
|
|
|
viafb_FB_MM = viaparinfo->fbmem_virt;
|
|
tmpm = viafb_mode;
|
|
tmpc = strsep(&tmpm, "x");
|
|
strict_strtoul(tmpc, 0, (unsigned long *)&default_xres);
|
|
strict_strtoul(tmpm, 0, (unsigned long *)&default_yres);
|
|
|
|
vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
|
|
DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
|
|
|
|
if (viafb_SAMM_ON == 1) {
|
|
if (strcmp(viafb_mode, viafb_mode1)) {
|
|
tmpm_sec = viafb_mode1;
|
|
tmpc_sec = strsep(&tmpm_sec, "x");
|
|
strict_strtoul(tmpc_sec, 0,
|
|
(unsigned long *)&viafb_second_xres);
|
|
strict_strtoul(tmpm_sec, 0,
|
|
(unsigned long *)&viafb_second_yres);
|
|
} else {
|
|
viafb_second_xres = default_xres;
|
|
viafb_second_yres = default_yres;
|
|
}
|
|
if (0 == viafb_second_virtual_xres) {
|
|
switch (viafb_second_xres) {
|
|
case 1400:
|
|
viafb_second_virtual_xres = 1408;
|
|
break;
|
|
default:
|
|
viafb_second_virtual_xres = viafb_second_xres;
|
|
break;
|
|
}
|
|
}
|
|
if (0 == viafb_second_virtual_yres)
|
|
viafb_second_virtual_yres = viafb_second_yres;
|
|
}
|
|
|
|
switch (viafb_bpp) {
|
|
case 0 ... 8:
|
|
viafb_bpp = 8;
|
|
break;
|
|
case 9 ... 16:
|
|
viafb_bpp = 16;
|
|
break;
|
|
case 17 ... 32:
|
|
viafb_bpp = 32;
|
|
break;
|
|
default:
|
|
viafb_bpp = 8;
|
|
}
|
|
default_var.xres = default_xres;
|
|
default_var.yres = default_yres;
|
|
switch (default_xres) {
|
|
case 1400:
|
|
default_var.xres_virtual = 1408;
|
|
break;
|
|
default:
|
|
default_var.xres_virtual = default_xres;
|
|
break;
|
|
}
|
|
default_var.yres_virtual = default_yres;
|
|
default_var.bits_per_pixel = viafb_bpp;
|
|
if (default_var.bits_per_pixel == 15)
|
|
default_var.bits_per_pixel = 16;
|
|
default_var.pixclock =
|
|
viafb_get_pixclock(default_xres, default_yres, viafb_refresh);
|
|
default_var.left_margin = (default_xres >> 3) & 0xf8;
|
|
default_var.right_margin = 32;
|
|
default_var.upper_margin = 16;
|
|
default_var.lower_margin = 4;
|
|
default_var.hsync_len = default_var.left_margin;
|
|
default_var.vsync_len = 4;
|
|
default_var.accel_flags = 0;
|
|
|
|
if (viafb_accel) {
|
|
viafbinfo->flags |=
|
|
(FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
|
|
FBINFO_HWACCEL_IMAGEBLIT);
|
|
default_var.accel_flags |= FB_ACCELF_TEXT;
|
|
} else
|
|
viafbinfo->flags |= FBINFO_HWACCEL_DISABLED;
|
|
|
|
if (viafb_dual_fb) {
|
|
viafbinfo1 = framebuffer_alloc(viafb_par_length, NULL);
|
|
if (!viafbinfo1) {
|
|
printk(KERN_ERR
|
|
"allocate the second framebuffer struct error\n");
|
|
framebuffer_release(viafbinfo);
|
|
return -ENOMEM;
|
|
}
|
|
viaparinfo1 = viafbinfo1->par;
|
|
memcpy(viaparinfo1, viaparinfo, viafb_par_length);
|
|
viaparinfo1->memsize = viaparinfo->memsize -
|
|
viafb_second_offset;
|
|
viaparinfo->memsize = viafb_second_offset;
|
|
viaparinfo1->fbmem_virt = viaparinfo->fbmem_virt +
|
|
viafb_second_offset;
|
|
viaparinfo1->fbmem = viaparinfo->fbmem + viafb_second_offset;
|
|
|
|
viaparinfo1->fbmem_used = viaparinfo->fbmem_used;
|
|
viaparinfo1->fbmem_free = viaparinfo1->memsize -
|
|
viaparinfo1->fbmem_used;
|
|
viaparinfo->fbmem_free = viaparinfo->memsize;
|
|
viaparinfo->fbmem_used = 0;
|
|
if (viafb_accel) {
|
|
viaparinfo1->cursor_start =
|
|
viaparinfo->cursor_start - viafb_second_offset;
|
|
viaparinfo1->VQ_start = viaparinfo->VQ_start -
|
|
viafb_second_offset;
|
|
viaparinfo1->VQ_end = viaparinfo->VQ_end -
|
|
viafb_second_offset;
|
|
}
|
|
|
|
memcpy(viafbinfo1, viafbinfo, sizeof(struct fb_info));
|
|
viafbinfo1->screen_base = viafbinfo->screen_base +
|
|
viafb_second_offset;
|
|
viafbinfo1->fix.smem_start = viaparinfo1->fbmem;
|
|
viafbinfo1->fix.smem_len = viaparinfo1->fbmem_free;
|
|
|
|
default_var.xres = viafb_second_xres;
|
|
default_var.yres = viafb_second_yres;
|
|
default_var.xres_virtual = viafb_second_virtual_xres;
|
|
default_var.yres_virtual = viafb_second_virtual_yres;
|
|
if (viafb_bpp1 != viafb_bpp)
|
|
viafb_bpp1 = viafb_bpp;
|
|
default_var.bits_per_pixel = viafb_bpp1;
|
|
default_var.pixclock =
|
|
viafb_get_pixclock(viafb_second_xres, viafb_second_yres,
|
|
viafb_refresh);
|
|
default_var.left_margin = (viafb_second_xres >> 3) & 0xf8;
|
|
default_var.right_margin = 32;
|
|
default_var.upper_margin = 16;
|
|
default_var.lower_margin = 4;
|
|
default_var.hsync_len = default_var.left_margin;
|
|
default_var.vsync_len = 4;
|
|
|
|
viafb_setup_fixinfo(&viafbinfo1->fix, viaparinfo1);
|
|
viafb_check_var(&default_var, viafbinfo1);
|
|
viafbinfo1->var = default_var;
|
|
viafb_update_viafb_par(viafbinfo);
|
|
viafb_update_fix(&viafbinfo1->fix, viafbinfo1);
|
|
}
|
|
|
|
viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
|
|
viafb_check_var(&default_var, viafbinfo);
|
|
viafbinfo->var = default_var;
|
|
viafb_update_viafb_par(viafbinfo);
|
|
viafb_update_fix(&viafbinfo->fix, viafbinfo);
|
|
default_var.activate = FB_ACTIVATE_NOW;
|
|
fb_alloc_cmap(&viafbinfo->cmap, 256, 0);
|
|
|
|
if (viafb_dual_fb && (viafb_primary_dev == LCD_Device)
|
|
&& (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)) {
|
|
if (register_framebuffer(viafbinfo1) < 0)
|
|
return -EINVAL;
|
|
}
|
|
if (register_framebuffer(viafbinfo) < 0)
|
|
return -EINVAL;
|
|
|
|
if (viafb_dual_fb && ((viafb_primary_dev != LCD_Device)
|
|
|| (viaparinfo->chip_info->gfx_chip_name !=
|
|
UNICHROME_CLE266))) {
|
|
if (register_framebuffer(viafbinfo1) < 0)
|
|
return -EINVAL;
|
|
}
|
|
DEBUG_MSG(KERN_INFO "fb%d: %s frame buffer device %dx%d-%dbpp\n",
|
|
viafbinfo->node, viafbinfo->fix.id, default_var.xres,
|
|
default_var.yres, default_var.bits_per_pixel);
|
|
|
|
viafb_init_proc(&viaparinfo->proc_entry);
|
|
viafb_init_dac(IGA2);
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit via_pci_remove(void)
|
|
{
|
|
DEBUG_MSG(KERN_INFO "via_pci_remove!\n");
|
|
fb_dealloc_cmap(&viafbinfo->cmap);
|
|
unregister_framebuffer(viafbinfo);
|
|
if (viafb_dual_fb)
|
|
unregister_framebuffer(viafbinfo1);
|
|
iounmap((void *)viaparinfo->fbmem_virt);
|
|
iounmap(viaparinfo->io_virt);
|
|
|
|
viafb_delete_i2c_buss(viaparinfo);
|
|
|
|
framebuffer_release(viafbinfo);
|
|
if (viafb_dual_fb)
|
|
framebuffer_release(viafbinfo1);
|
|
|
|
viafb_remove_proc(viaparinfo->proc_entry);
|
|
}
|
|
|
|
#ifndef MODULE
|
|
static int __init viafb_setup(char *options)
|
|
{
|
|
char *this_opt;
|
|
DEBUG_MSG(KERN_INFO "viafb_setup!\n");
|
|
|
|
if (!options || !*options)
|
|
return 0;
|
|
|
|
while ((this_opt = strsep(&options, ",")) != NULL) {
|
|
if (!*this_opt)
|
|
continue;
|
|
|
|
if (!strncmp(this_opt, "viafb_mode1=", 12))
|
|
viafb_mode1 = kstrdup(this_opt + 12, GFP_KERNEL);
|
|
else if (!strncmp(this_opt, "viafb_mode=", 11))
|
|
viafb_mode = kstrdup(this_opt + 11, GFP_KERNEL);
|
|
else if (!strncmp(this_opt, "viafb_bpp1=", 11))
|
|
strict_strtoul(this_opt + 11, 0,
|
|
(unsigned long *)&viafb_bpp1);
|
|
else if (!strncmp(this_opt, "viafb_bpp=", 10))
|
|
strict_strtoul(this_opt + 10, 0,
|
|
(unsigned long *)&viafb_bpp);
|
|
else if (!strncmp(this_opt, "viafb_refresh1=", 15))
|
|
strict_strtoul(this_opt + 15, 0,
|
|
(unsigned long *)&viafb_refresh1);
|
|
else if (!strncmp(this_opt, "viafb_refresh=", 14))
|
|
strict_strtoul(this_opt + 14, 0,
|
|
(unsigned long *)&viafb_refresh);
|
|
else if (!strncmp(this_opt, "viafb_lcd_dsp_method=", 21))
|
|
strict_strtoul(this_opt + 21, 0,
|
|
(unsigned long *)&viafb_lcd_dsp_method);
|
|
else if (!strncmp(this_opt, "viafb_lcd_panel_id=", 19))
|
|
strict_strtoul(this_opt + 19, 0,
|
|
(unsigned long *)&viafb_lcd_panel_id);
|
|
else if (!strncmp(this_opt, "viafb_accel=", 12))
|
|
strict_strtoul(this_opt + 12, 0,
|
|
(unsigned long *)&viafb_accel);
|
|
else if (!strncmp(this_opt, "viafb_SAMM_ON=", 14))
|
|
strict_strtoul(this_opt + 14, 0,
|
|
(unsigned long *)&viafb_SAMM_ON);
|
|
else if (!strncmp(this_opt, "viafb_active_dev=", 17))
|
|
viafb_active_dev = kstrdup(this_opt + 17, GFP_KERNEL);
|
|
else if (!strncmp(this_opt,
|
|
"viafb_display_hardware_layout=", 30))
|
|
strict_strtoul(this_opt + 30, 0,
|
|
(unsigned long *)&viafb_display_hardware_layout);
|
|
else if (!strncmp(this_opt, "viafb_second_size=", 18))
|
|
strict_strtoul(this_opt + 18, 0,
|
|
(unsigned long *)&viafb_second_size);
|
|
else if (!strncmp(this_opt,
|
|
"viafb_platform_epia_dvi=", 24))
|
|
strict_strtoul(this_opt + 24, 0,
|
|
(unsigned long *)&viafb_platform_epia_dvi);
|
|
else if (!strncmp(this_opt,
|
|
"viafb_device_lcd_dualedge=", 26))
|
|
strict_strtoul(this_opt + 26, 0,
|
|
(unsigned long *)&viafb_device_lcd_dualedge);
|
|
else if (!strncmp(this_opt, "viafb_bus_width=", 16))
|
|
strict_strtoul(this_opt + 16, 0,
|
|
(unsigned long *)&viafb_bus_width);
|
|
else if (!strncmp(this_opt, "viafb_lcd_mode=", 15))
|
|
strict_strtoul(this_opt + 15, 0,
|
|
(unsigned long *)&viafb_lcd_mode);
|
|
else if (!strncmp(this_opt, "viafb_video_dev=", 16))
|
|
viafb_video_dev = kstrdup(this_opt + 16, GFP_KERNEL);
|
|
else if (!strncmp(this_opt, "viafb_lcd_port=", 15))
|
|
viafb_lcd_port = kstrdup(this_opt + 15, GFP_KERNEL);
|
|
else if (!strncmp(this_opt, "viafb_dvi_port=", 15))
|
|
viafb_dvi_port = kstrdup(this_opt + 15, GFP_KERNEL);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init viafb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
if (fb_get_options("viafb", &option))
|
|
return -ENODEV;
|
|
viafb_setup(option);
|
|
#endif
|
|
printk(KERN_INFO
|
|
"VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
|
|
VERSION_MAJOR, VERSION_MINOR);
|
|
return via_pci_probe();
|
|
}
|
|
|
|
static void __exit viafb_exit(void)
|
|
{
|
|
DEBUG_MSG(KERN_INFO "viafb_exit!\n");
|
|
via_pci_remove();
|
|
}
|
|
|
|
static struct fb_ops viafb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_open = viafb_open,
|
|
.fb_release = viafb_release,
|
|
.fb_check_var = viafb_check_var,
|
|
.fb_set_par = viafb_set_par,
|
|
.fb_setcolreg = viafb_setcolreg,
|
|
.fb_pan_display = viafb_pan_display,
|
|
.fb_blank = viafb_blank,
|
|
.fb_fillrect = viafb_fillrect,
|
|
.fb_copyarea = viafb_copyarea,
|
|
.fb_imageblit = viafb_imageblit,
|
|
.fb_cursor = viafb_cursor,
|
|
.fb_ioctl = viafb_ioctl,
|
|
.fb_sync = viafb_sync,
|
|
.fb_setcmap = viafb_setcmap,
|
|
};
|
|
|
|
module_init(viafb_init);
|
|
module_exit(viafb_exit);
|
|
|
|
#ifdef MODULE
|
|
module_param(viafb_memsize, int, 0);
|
|
|
|
module_param(viafb_mode, charp, 0);
|
|
MODULE_PARM_DESC(viafb_mode, "Set resolution (default=640x480)");
|
|
|
|
module_param(viafb_mode1, charp, 0);
|
|
MODULE_PARM_DESC(viafb_mode1, "Set resolution (default=640x480)");
|
|
|
|
module_param(viafb_bpp, int, 0);
|
|
MODULE_PARM_DESC(viafb_bpp, "Set color depth (default=32bpp)");
|
|
|
|
module_param(viafb_bpp1, int, 0);
|
|
MODULE_PARM_DESC(viafb_bpp1, "Set color depth (default=32bpp)");
|
|
|
|
module_param(viafb_refresh, int, 0);
|
|
MODULE_PARM_DESC(viafb_refresh,
|
|
"Set CRT viafb_refresh rate (default = 60)");
|
|
|
|
module_param(viafb_refresh1, int, 0);
|
|
MODULE_PARM_DESC(viafb_refresh1,
|
|
"Set CRT refresh rate (default = 60)");
|
|
|
|
module_param(viafb_lcd_panel_id, int, 0);
|
|
MODULE_PARM_DESC(viafb_lcd_panel_id,
|
|
"Set Flat Panel type(Default=1024x768)");
|
|
|
|
module_param(viafb_lcd_dsp_method, int, 0);
|
|
MODULE_PARM_DESC(viafb_lcd_dsp_method,
|
|
"Set Flat Panel display scaling method.(Default=Expandsion)");
|
|
|
|
module_param(viafb_SAMM_ON, int, 0);
|
|
MODULE_PARM_DESC(viafb_SAMM_ON,
|
|
"Turn on/off flag of SAMM(Default=OFF)");
|
|
|
|
module_param(viafb_accel, int, 0);
|
|
MODULE_PARM_DESC(viafb_accel,
|
|
"Set 2D Hardware Acceleration.(Default = OFF)");
|
|
|
|
module_param(viafb_active_dev, charp, 0);
|
|
MODULE_PARM_DESC(viafb_active_dev, "Specify active devices.");
|
|
|
|
module_param(viafb_display_hardware_layout, int, 0);
|
|
MODULE_PARM_DESC(viafb_display_hardware_layout,
|
|
"Display Hardware Layout (LCD Only, DVI Only...,etc)");
|
|
|
|
module_param(viafb_second_size, int, 0);
|
|
MODULE_PARM_DESC(viafb_second_size,
|
|
"Set secondary device memory size");
|
|
|
|
module_param(viafb_dual_fb, int, 0);
|
|
MODULE_PARM_DESC(viafb_dual_fb,
|
|
"Turn on/off flag of dual framebuffer devices.(Default = OFF)");
|
|
|
|
module_param(viafb_platform_epia_dvi, int, 0);
|
|
MODULE_PARM_DESC(viafb_platform_epia_dvi,
|
|
"Turn on/off flag of DVI devices on EPIA board.(Default = OFF)");
|
|
|
|
module_param(viafb_device_lcd_dualedge, int, 0);
|
|
MODULE_PARM_DESC(viafb_device_lcd_dualedge,
|
|
"Turn on/off flag of dual edge panel.(Default = OFF)");
|
|
|
|
module_param(viafb_bus_width, int, 0);
|
|
MODULE_PARM_DESC(viafb_bus_width,
|
|
"Set bus width of panel.(Default = 12)");
|
|
|
|
module_param(viafb_lcd_mode, int, 0);
|
|
MODULE_PARM_DESC(viafb_lcd_mode,
|
|
"Set Flat Panel mode(Default=OPENLDI)");
|
|
|
|
module_param(viafb_video_dev, charp, 0);
|
|
MODULE_PARM_DESC(viafb_video_dev, "Specify video devices.");
|
|
|
|
module_param(viafb_lcd_port, charp, 0);
|
|
MODULE_PARM_DESC(viafb_lcd_port, "Specify LCD output port.");
|
|
|
|
module_param(viafb_dvi_port, charp, 0);
|
|
MODULE_PARM_DESC(viafb_dvi_port, "Specify DVI output port.");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
#endif
|