forked from Minki/linux
5a07055a38
Bootloader may let McBSP logic running so make sure that block is idle before requesting IRQs. Also make sure that TX and RX waitqueues are initialized before request_irq. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
976 lines
24 KiB
C
976 lines
24 KiB
C
/*
|
|
* linux/arch/arm/plat-omap/mcbsp.c
|
|
*
|
|
* Copyright (C) 2004 Nokia Corporation
|
|
* Author: Samuel Ortiz <samuel.ortiz@nokia.com>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Multichannel mode not supported.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/dma.h>
|
|
#include <mach/mcbsp.h>
|
|
|
|
struct omap_mcbsp **mcbsp_ptr;
|
|
int omap_mcbsp_count;
|
|
|
|
void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val)
|
|
{
|
|
if (cpu_class_is_omap1() || cpu_is_omap2420())
|
|
__raw_writew((u16)val, io_base + reg);
|
|
else
|
|
__raw_writel(val, io_base + reg);
|
|
}
|
|
|
|
int omap_mcbsp_read(void __iomem *io_base, u16 reg)
|
|
{
|
|
if (cpu_class_is_omap1() || cpu_is_omap2420())
|
|
return __raw_readw(io_base + reg);
|
|
else
|
|
return __raw_readl(io_base + reg);
|
|
}
|
|
|
|
#define OMAP_MCBSP_READ(base, reg) \
|
|
omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg)
|
|
#define OMAP_MCBSP_WRITE(base, reg, val) \
|
|
omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val)
|
|
|
|
#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
|
|
#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
|
|
|
|
static void omap_mcbsp_dump_reg(u8 id)
|
|
{
|
|
struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
|
|
dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, DRR2));
|
|
dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, DRR1));
|
|
dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, DXR2));
|
|
dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, DXR1));
|
|
dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, SPCR2));
|
|
dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, SPCR1));
|
|
dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, RCR2));
|
|
dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, RCR1));
|
|
dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, XCR2));
|
|
dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, XCR1));
|
|
dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, SRGR2));
|
|
dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, SRGR1));
|
|
dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n",
|
|
OMAP_MCBSP_READ(mcbsp->io_base, PCR0));
|
|
dev_dbg(mcbsp->dev, "***********************\n");
|
|
}
|
|
|
|
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct omap_mcbsp *mcbsp_tx = dev_id;
|
|
|
|
dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
|
|
OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
|
|
|
|
complete(&mcbsp_tx->tx_irq_completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct omap_mcbsp *mcbsp_rx = dev_id;
|
|
|
|
dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
|
|
OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
|
|
|
|
complete(&mcbsp_rx->rx_irq_completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
|
|
{
|
|
struct omap_mcbsp *mcbsp_dma_tx = data;
|
|
|
|
dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
|
|
OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
|
|
|
|
/* We can free the channels */
|
|
omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
|
|
mcbsp_dma_tx->dma_tx_lch = -1;
|
|
|
|
complete(&mcbsp_dma_tx->tx_dma_completion);
|
|
}
|
|
|
|
static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
|
|
{
|
|
struct omap_mcbsp *mcbsp_dma_rx = data;
|
|
|
|
dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
|
|
OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
|
|
|
|
/* We can free the channels */
|
|
omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
|
|
mcbsp_dma_rx->dma_rx_lch = -1;
|
|
|
|
complete(&mcbsp_dma_rx->rx_dma_completion);
|
|
}
|
|
|
|
/*
|
|
* omap_mcbsp_config simply write a config to the
|
|
* appropriate McBSP.
|
|
* You either call this function or set the McBSP registers
|
|
* by yourself before calling omap_mcbsp_start().
|
|
*/
|
|
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *io_base;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
io_base = mcbsp->io_base;
|
|
dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n",
|
|
mcbsp->id, mcbsp->phys_base);
|
|
|
|
/* We write the given config */
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1);
|
|
OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2);
|
|
OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1);
|
|
OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2);
|
|
OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1);
|
|
OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2);
|
|
OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1);
|
|
OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
|
|
OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
|
|
OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_config);
|
|
|
|
/*
|
|
* We can choose between IRQ based or polled IO.
|
|
* This needs to be called before omap_mcbsp_request().
|
|
*/
|
|
int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
spin_lock(&mcbsp->lock);
|
|
|
|
if (!mcbsp->free) {
|
|
dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
|
|
mcbsp->id);
|
|
spin_unlock(&mcbsp->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mcbsp->io_type = io_type;
|
|
|
|
spin_unlock(&mcbsp->lock);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_set_io_type);
|
|
|
|
int omap_mcbsp_request(unsigned int id)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
int err;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
|
|
mcbsp->pdata->ops->request(id);
|
|
|
|
clk_enable(mcbsp->clk);
|
|
|
|
spin_lock(&mcbsp->lock);
|
|
if (!mcbsp->free) {
|
|
dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
|
|
mcbsp->id);
|
|
spin_unlock(&mcbsp->lock);
|
|
return -1;
|
|
}
|
|
|
|
mcbsp->free = 0;
|
|
spin_unlock(&mcbsp->lock);
|
|
|
|
/*
|
|
* Make sure that transmitter, receiver and sample-rate generator are
|
|
* not running before activating IRQs.
|
|
*/
|
|
OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0);
|
|
OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0);
|
|
|
|
if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
|
|
/* We need to get IRQs here */
|
|
init_completion(&mcbsp->tx_irq_completion);
|
|
err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
|
|
0, "McBSP", (void *)mcbsp);
|
|
if (err != 0) {
|
|
dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
|
|
"for McBSP%d\n", mcbsp->tx_irq,
|
|
mcbsp->id);
|
|
return err;
|
|
}
|
|
|
|
init_completion(&mcbsp->rx_irq_completion);
|
|
err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler,
|
|
0, "McBSP", (void *)mcbsp);
|
|
if (err != 0) {
|
|
dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
|
|
"for McBSP%d\n", mcbsp->rx_irq,
|
|
mcbsp->id);
|
|
free_irq(mcbsp->tx_irq, (void *)mcbsp);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_request);
|
|
|
|
void omap_mcbsp_free(unsigned int id)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
|
|
mcbsp->pdata->ops->free(id);
|
|
|
|
clk_disable(mcbsp->clk);
|
|
|
|
spin_lock(&mcbsp->lock);
|
|
if (mcbsp->free) {
|
|
dev_err(mcbsp->dev, "McBSP%d was not reserved\n",
|
|
mcbsp->id);
|
|
spin_unlock(&mcbsp->lock);
|
|
return;
|
|
}
|
|
|
|
mcbsp->free = 1;
|
|
spin_unlock(&mcbsp->lock);
|
|
|
|
if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
|
|
/* Free IRQs */
|
|
free_irq(mcbsp->rx_irq, (void *)mcbsp);
|
|
free_irq(mcbsp->tx_irq, (void *)mcbsp);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_free);
|
|
|
|
/*
|
|
* Here we start the McBSP, by enabling the sample
|
|
* generator, both transmitter and receivers,
|
|
* and the frame sync.
|
|
*/
|
|
void omap_mcbsp_start(unsigned int id)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *io_base;
|
|
u16 w;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
io_base = mcbsp->io_base;
|
|
|
|
mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
|
|
mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
|
|
|
|
/* Start the sample generator */
|
|
w = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
|
|
|
|
/* Enable transmitter and receiver */
|
|
w = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
|
|
|
|
w = OMAP_MCBSP_READ(io_base, SPCR1);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
|
|
|
|
udelay(100);
|
|
|
|
/* Start frame sync */
|
|
w = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
|
|
|
|
/* Dump McBSP Regs */
|
|
omap_mcbsp_dump_reg(id);
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_start);
|
|
|
|
void omap_mcbsp_stop(unsigned int id)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *io_base;
|
|
u16 w;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return;
|
|
}
|
|
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
io_base = mcbsp->io_base;
|
|
|
|
/* Reset transmitter */
|
|
w = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
|
|
|
|
/* Reset receiver */
|
|
w = OMAP_MCBSP_READ(io_base, SPCR1);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
|
|
|
|
/* Reset the sample rate generator */
|
|
w = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_stop);
|
|
|
|
/* polled mcbsp i/o operations */
|
|
int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *base;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
base = mcbsp->io_base;
|
|
|
|
writew(buf, base + OMAP_MCBSP_REG_DXR1);
|
|
/* if frame sync error - clear the error */
|
|
if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
|
|
/* clear error */
|
|
writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR),
|
|
base + OMAP_MCBSP_REG_SPCR2);
|
|
/* resend */
|
|
return -1;
|
|
} else {
|
|
/* wait for transmit confirmation */
|
|
int attemps = 0;
|
|
while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) {
|
|
if (attemps++ > 1000) {
|
|
writew(readw(base + OMAP_MCBSP_REG_SPCR2) &
|
|
(~XRST),
|
|
base + OMAP_MCBSP_REG_SPCR2);
|
|
udelay(10);
|
|
writew(readw(base + OMAP_MCBSP_REG_SPCR2) |
|
|
(XRST),
|
|
base + OMAP_MCBSP_REG_SPCR2);
|
|
udelay(10);
|
|
dev_err(mcbsp->dev, "Could not write to"
|
|
" McBSP%d Register\n", mcbsp->id);
|
|
return -2;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_pollwrite);
|
|
|
|
int omap_mcbsp_pollread(unsigned int id, u16 *buf)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *base;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
base = mcbsp->io_base;
|
|
/* if frame sync error - clear the error */
|
|
if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
|
|
/* clear error */
|
|
writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR),
|
|
base + OMAP_MCBSP_REG_SPCR1);
|
|
/* resend */
|
|
return -1;
|
|
} else {
|
|
/* wait for recieve confirmation */
|
|
int attemps = 0;
|
|
while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) {
|
|
if (attemps++ > 1000) {
|
|
writew(readw(base + OMAP_MCBSP_REG_SPCR1) &
|
|
(~RRST),
|
|
base + OMAP_MCBSP_REG_SPCR1);
|
|
udelay(10);
|
|
writew(readw(base + OMAP_MCBSP_REG_SPCR1) |
|
|
(RRST),
|
|
base + OMAP_MCBSP_REG_SPCR1);
|
|
udelay(10);
|
|
dev_err(mcbsp->dev, "Could not read from"
|
|
" McBSP%d Register\n", mcbsp->id);
|
|
return -2;
|
|
}
|
|
}
|
|
}
|
|
*buf = readw(base + OMAP_MCBSP_REG_DRR1);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_pollread);
|
|
|
|
/*
|
|
* IRQ based word transmission.
|
|
*/
|
|
void omap_mcbsp_xmit_word(unsigned int id, u32 word)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *io_base;
|
|
omap_mcbsp_word_length word_length;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return;
|
|
}
|
|
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
io_base = mcbsp->io_base;
|
|
word_length = mcbsp->tx_word_length;
|
|
|
|
wait_for_completion(&mcbsp->tx_irq_completion);
|
|
|
|
if (word_length > OMAP_MCBSP_WORD_16)
|
|
OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
|
|
OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_xmit_word);
|
|
|
|
u32 omap_mcbsp_recv_word(unsigned int id)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *io_base;
|
|
u16 word_lsb, word_msb = 0;
|
|
omap_mcbsp_word_length word_length;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
word_length = mcbsp->rx_word_length;
|
|
io_base = mcbsp->io_base;
|
|
|
|
wait_for_completion(&mcbsp->rx_irq_completion);
|
|
|
|
if (word_length > OMAP_MCBSP_WORD_16)
|
|
word_msb = OMAP_MCBSP_READ(io_base, DRR2);
|
|
word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
|
|
|
|
return (word_lsb | (word_msb << 16));
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_recv_word);
|
|
|
|
int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
void __iomem *io_base;
|
|
omap_mcbsp_word_length tx_word_length;
|
|
omap_mcbsp_word_length rx_word_length;
|
|
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
io_base = mcbsp->io_base;
|
|
tx_word_length = mcbsp->tx_word_length;
|
|
rx_word_length = mcbsp->rx_word_length;
|
|
|
|
if (tx_word_length != rx_word_length)
|
|
return -EINVAL;
|
|
|
|
/* First we wait for the transmitter to be ready */
|
|
spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
while (!(spcr2 & XRDY)) {
|
|
spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
if (attempts++ > 1000) {
|
|
/* We must reset the transmitter */
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST));
|
|
udelay(10);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
|
|
udelay(10);
|
|
dev_err(mcbsp->dev, "McBSP%d transmitter not "
|
|
"ready\n", mcbsp->id);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
/* Now we can push the data */
|
|
if (tx_word_length > OMAP_MCBSP_WORD_16)
|
|
OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
|
|
OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
|
|
|
|
/* We wait for the receiver to be ready */
|
|
spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
|
|
while (!(spcr1 & RRDY)) {
|
|
spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
|
|
if (attempts++ > 1000) {
|
|
/* We must reset the receiver */
|
|
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST));
|
|
udelay(10);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
|
|
udelay(10);
|
|
dev_err(mcbsp->dev, "McBSP%d receiver not "
|
|
"ready\n", mcbsp->id);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
/* Receiver is ready, let's read the dummy data */
|
|
if (rx_word_length > OMAP_MCBSP_WORD_16)
|
|
word_msb = OMAP_MCBSP_READ(io_base, DRR2);
|
|
word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
|
|
|
|
int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
u32 clock_word = 0;
|
|
void __iomem *io_base;
|
|
omap_mcbsp_word_length tx_word_length;
|
|
omap_mcbsp_word_length rx_word_length;
|
|
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
io_base = mcbsp->io_base;
|
|
|
|
tx_word_length = mcbsp->tx_word_length;
|
|
rx_word_length = mcbsp->rx_word_length;
|
|
|
|
if (tx_word_length != rx_word_length)
|
|
return -EINVAL;
|
|
|
|
/* First we wait for the transmitter to be ready */
|
|
spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
while (!(spcr2 & XRDY)) {
|
|
spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
|
|
if (attempts++ > 1000) {
|
|
/* We must reset the transmitter */
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST));
|
|
udelay(10);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
|
|
udelay(10);
|
|
dev_err(mcbsp->dev, "McBSP%d transmitter not "
|
|
"ready\n", mcbsp->id);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
/* We first need to enable the bus clock */
|
|
if (tx_word_length > OMAP_MCBSP_WORD_16)
|
|
OMAP_MCBSP_WRITE(io_base, DXR2, clock_word >> 16);
|
|
OMAP_MCBSP_WRITE(io_base, DXR1, clock_word & 0xffff);
|
|
|
|
/* We wait for the receiver to be ready */
|
|
spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
|
|
while (!(spcr1 & RRDY)) {
|
|
spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
|
|
if (attempts++ > 1000) {
|
|
/* We must reset the receiver */
|
|
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST));
|
|
udelay(10);
|
|
OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
|
|
udelay(10);
|
|
dev_err(mcbsp->dev, "McBSP%d receiver not "
|
|
"ready\n", mcbsp->id);
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
/* Receiver is ready, there is something for us */
|
|
if (rx_word_length > OMAP_MCBSP_WORD_16)
|
|
word_msb = OMAP_MCBSP_READ(io_base, DRR2);
|
|
word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
|
|
|
|
word[0] = (word_lsb | (word_msb << 16));
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
|
|
|
|
/*
|
|
* Simple DMA based buffer rx/tx routines.
|
|
* Nothing fancy, just a single buffer tx/rx through DMA.
|
|
* The DMA resources are released once the transfer is done.
|
|
* For anything fancier, you should use your own customized DMA
|
|
* routines and callbacks.
|
|
*/
|
|
int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
|
|
unsigned int length)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
int dma_tx_ch;
|
|
int src_port = 0;
|
|
int dest_port = 0;
|
|
int sync_dev = 0;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX",
|
|
omap_mcbsp_tx_dma_callback,
|
|
mcbsp,
|
|
&dma_tx_ch)) {
|
|
dev_err(mcbsp->dev, " Unable to request DMA channel for "
|
|
"McBSP%d TX. Trying IRQ based TX\n",
|
|
mcbsp->id);
|
|
return -EAGAIN;
|
|
}
|
|
mcbsp->dma_tx_lch = dma_tx_ch;
|
|
|
|
dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id,
|
|
dma_tx_ch);
|
|
|
|
init_completion(&mcbsp->tx_dma_completion);
|
|
|
|
if (cpu_class_is_omap1()) {
|
|
src_port = OMAP_DMA_PORT_TIPB;
|
|
dest_port = OMAP_DMA_PORT_EMIFF;
|
|
}
|
|
if (cpu_class_is_omap2())
|
|
sync_dev = mcbsp->dma_tx_sync;
|
|
|
|
omap_set_dma_transfer_params(mcbsp->dma_tx_lch,
|
|
OMAP_DMA_DATA_TYPE_S16,
|
|
length >> 1, 1,
|
|
OMAP_DMA_SYNC_ELEMENT,
|
|
sync_dev, 0);
|
|
|
|
omap_set_dma_dest_params(mcbsp->dma_tx_lch,
|
|
src_port,
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
mcbsp->phys_base + OMAP_MCBSP_REG_DXR1,
|
|
0, 0);
|
|
|
|
omap_set_dma_src_params(mcbsp->dma_tx_lch,
|
|
dest_port,
|
|
OMAP_DMA_AMODE_POST_INC,
|
|
buffer,
|
|
0, 0);
|
|
|
|
omap_start_dma(mcbsp->dma_tx_lch);
|
|
wait_for_completion(&mcbsp->tx_dma_completion);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
|
|
|
|
int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
|
|
unsigned int length)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
int dma_rx_ch;
|
|
int src_port = 0;
|
|
int dest_port = 0;
|
|
int sync_dev = 0;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return -ENODEV;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX",
|
|
omap_mcbsp_rx_dma_callback,
|
|
mcbsp,
|
|
&dma_rx_ch)) {
|
|
dev_err(mcbsp->dev, "Unable to request DMA channel for "
|
|
"McBSP%d RX. Trying IRQ based RX\n",
|
|
mcbsp->id);
|
|
return -EAGAIN;
|
|
}
|
|
mcbsp->dma_rx_lch = dma_rx_ch;
|
|
|
|
dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id,
|
|
dma_rx_ch);
|
|
|
|
init_completion(&mcbsp->rx_dma_completion);
|
|
|
|
if (cpu_class_is_omap1()) {
|
|
src_port = OMAP_DMA_PORT_TIPB;
|
|
dest_port = OMAP_DMA_PORT_EMIFF;
|
|
}
|
|
if (cpu_class_is_omap2())
|
|
sync_dev = mcbsp->dma_rx_sync;
|
|
|
|
omap_set_dma_transfer_params(mcbsp->dma_rx_lch,
|
|
OMAP_DMA_DATA_TYPE_S16,
|
|
length >> 1, 1,
|
|
OMAP_DMA_SYNC_ELEMENT,
|
|
sync_dev, 0);
|
|
|
|
omap_set_dma_src_params(mcbsp->dma_rx_lch,
|
|
src_port,
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
mcbsp->phys_base + OMAP_MCBSP_REG_DRR1,
|
|
0, 0);
|
|
|
|
omap_set_dma_dest_params(mcbsp->dma_rx_lch,
|
|
dest_port,
|
|
OMAP_DMA_AMODE_POST_INC,
|
|
buffer,
|
|
0, 0);
|
|
|
|
omap_start_dma(mcbsp->dma_rx_lch);
|
|
wait_for_completion(&mcbsp->rx_dma_completion);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
|
|
|
|
/*
|
|
* SPI wrapper.
|
|
* Since SPI setup is much simpler than the generic McBSP one,
|
|
* this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
|
|
* Once this is done, you can call omap_mcbsp_start().
|
|
*/
|
|
void omap_mcbsp_set_spi_mode(unsigned int id,
|
|
const struct omap_mcbsp_spi_cfg *spi_cfg)
|
|
{
|
|
struct omap_mcbsp *mcbsp;
|
|
struct omap_mcbsp_reg_cfg mcbsp_cfg;
|
|
|
|
if (!omap_mcbsp_check_valid_id(id)) {
|
|
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
|
|
return;
|
|
}
|
|
mcbsp = id_to_mcbsp_ptr(id);
|
|
|
|
memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
|
|
|
|
/* SPI has only one frame */
|
|
mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
|
|
mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
|
|
|
|
/* Clock stop mode */
|
|
if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
|
|
mcbsp_cfg.spcr1 |= (1 << 12);
|
|
else
|
|
mcbsp_cfg.spcr1 |= (3 << 11);
|
|
|
|
/* Set clock parities */
|
|
if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING)
|
|
mcbsp_cfg.pcr0 |= CLKRP;
|
|
else
|
|
mcbsp_cfg.pcr0 &= ~CLKRP;
|
|
|
|
if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING)
|
|
mcbsp_cfg.pcr0 &= ~CLKXP;
|
|
else
|
|
mcbsp_cfg.pcr0 |= CLKXP;
|
|
|
|
/* Set SCLKME to 0 and CLKSM to 1 */
|
|
mcbsp_cfg.pcr0 &= ~SCLKME;
|
|
mcbsp_cfg.srgr2 |= CLKSM;
|
|
|
|
/* Set FSXP */
|
|
if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH)
|
|
mcbsp_cfg.pcr0 &= ~FSXP;
|
|
else
|
|
mcbsp_cfg.pcr0 |= FSXP;
|
|
|
|
if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
|
|
mcbsp_cfg.pcr0 |= CLKXM;
|
|
mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1);
|
|
mcbsp_cfg.pcr0 |= FSXM;
|
|
mcbsp_cfg.srgr2 &= ~FSGM;
|
|
mcbsp_cfg.xcr2 |= XDATDLY(1);
|
|
mcbsp_cfg.rcr2 |= RDATDLY(1);
|
|
} else {
|
|
mcbsp_cfg.pcr0 &= ~CLKXM;
|
|
mcbsp_cfg.srgr1 |= CLKGDV(1);
|
|
mcbsp_cfg.pcr0 &= ~FSXM;
|
|
mcbsp_cfg.xcr2 &= ~XDATDLY(3);
|
|
mcbsp_cfg.rcr2 &= ~RDATDLY(3);
|
|
}
|
|
|
|
mcbsp_cfg.xcr2 &= ~XPHASE;
|
|
mcbsp_cfg.rcr2 &= ~RPHASE;
|
|
|
|
omap_mcbsp_config(id, &mcbsp_cfg);
|
|
}
|
|
EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
|
|
|
|
/*
|
|
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
|
|
* 730 has only 2 McBSP, and both of them are MPU peripherals.
|
|
*/
|
|
static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
|
|
struct omap_mcbsp *mcbsp;
|
|
int id = pdev->id - 1;
|
|
int ret = 0;
|
|
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "McBSP device initialized without"
|
|
"platform data\n");
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
|
|
|
|
if (id >= omap_mcbsp_count) {
|
|
dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL);
|
|
if (!mcbsp) {
|
|
ret = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
mcbsp_ptr[id] = mcbsp;
|
|
|
|
spin_lock_init(&mcbsp->lock);
|
|
mcbsp->id = id + 1;
|
|
mcbsp->free = 1;
|
|
mcbsp->dma_tx_lch = -1;
|
|
mcbsp->dma_rx_lch = -1;
|
|
|
|
mcbsp->phys_base = pdata->phys_base;
|
|
mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K);
|
|
if (!mcbsp->io_base) {
|
|
ret = -ENOMEM;
|
|
goto err_ioremap;
|
|
}
|
|
|
|
/* Default I/O is IRQ based */
|
|
mcbsp->io_type = OMAP_MCBSP_IRQ_IO;
|
|
mcbsp->tx_irq = pdata->tx_irq;
|
|
mcbsp->rx_irq = pdata->rx_irq;
|
|
mcbsp->dma_rx_sync = pdata->dma_rx_sync;
|
|
mcbsp->dma_tx_sync = pdata->dma_tx_sync;
|
|
|
|
if (pdata->clk_name)
|
|
mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
|
|
if (IS_ERR(mcbsp->clk)) {
|
|
dev_err(&pdev->dev,
|
|
"Invalid clock configuration for McBSP%d.\n",
|
|
mcbsp->id);
|
|
ret = PTR_ERR(mcbsp->clk);
|
|
goto err_clk;
|
|
}
|
|
|
|
mcbsp->pdata = pdata;
|
|
mcbsp->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, mcbsp);
|
|
return 0;
|
|
|
|
err_clk:
|
|
iounmap(mcbsp->io_base);
|
|
err_ioremap:
|
|
mcbsp->free = 0;
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
if (mcbsp) {
|
|
|
|
if (mcbsp->pdata && mcbsp->pdata->ops &&
|
|
mcbsp->pdata->ops->free)
|
|
mcbsp->pdata->ops->free(mcbsp->id);
|
|
|
|
clk_disable(mcbsp->clk);
|
|
clk_put(mcbsp->clk);
|
|
|
|
iounmap(mcbsp->io_base);
|
|
|
|
mcbsp->clk = NULL;
|
|
mcbsp->free = 0;
|
|
mcbsp->dev = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver omap_mcbsp_driver = {
|
|
.probe = omap_mcbsp_probe,
|
|
.remove = __devexit_p(omap_mcbsp_remove),
|
|
.driver = {
|
|
.name = "omap-mcbsp",
|
|
},
|
|
};
|
|
|
|
int __init omap_mcbsp_init(void)
|
|
{
|
|
/* Register the McBSP driver */
|
|
return platform_driver_register(&omap_mcbsp_driver);
|
|
}
|
|
|