forked from Minki/linux
dff1c7032f
Make full use of the generic fbdev client. Cc: David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-8-noralf@tronnes.org
401 lines
10 KiB
C
401 lines
10 KiB
C
/*
|
|
* DRM driver for Sitronix ST7586 panels
|
|
*
|
|
* Copyright 2017 David Lechner <david@lechnology.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-buf.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/property.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_fb_helper.h>
|
|
#include <drm/drm_gem_framebuffer_helper.h>
|
|
#include <drm/tinydrm/mipi-dbi.h>
|
|
#include <drm/tinydrm/tinydrm-helpers.h>
|
|
|
|
/* controller-specific commands */
|
|
#define ST7586_DISP_MODE_GRAY 0x38
|
|
#define ST7586_DISP_MODE_MONO 0x39
|
|
#define ST7586_ENABLE_DDRAM 0x3a
|
|
#define ST7586_SET_DISP_DUTY 0xb0
|
|
#define ST7586_SET_PART_DISP 0xb4
|
|
#define ST7586_SET_NLINE_INV 0xb5
|
|
#define ST7586_SET_VOP 0xc0
|
|
#define ST7586_SET_BIAS_SYSTEM 0xc3
|
|
#define ST7586_SET_BOOST_LEVEL 0xc4
|
|
#define ST7586_SET_VOP_OFFSET 0xc7
|
|
#define ST7586_ENABLE_ANALOG 0xd0
|
|
#define ST7586_AUTO_READ_CTRL 0xd7
|
|
#define ST7586_OTP_RW_CTRL 0xe0
|
|
#define ST7586_OTP_CTRL_OUT 0xe1
|
|
#define ST7586_OTP_READ 0xe3
|
|
|
|
#define ST7586_DISP_CTRL_MX BIT(6)
|
|
#define ST7586_DISP_CTRL_MY BIT(7)
|
|
|
|
/*
|
|
* The ST7586 controller has an unusual pixel format where 2bpp grayscale is
|
|
* packed 3 pixels per byte with the first two pixels using 3 bits and the 3rd
|
|
* pixel using only 2 bits.
|
|
*
|
|
* | D7 | D6 | D5 || | || 2bpp |
|
|
* | (D4) | (D3) | (D2) || D1 | D0 || GRAY |
|
|
* +------+------+------++------+------++------+
|
|
* | 1 | 1 | 1 || 1 | 1 || 0 0 | black
|
|
* | 1 | 0 | 0 || 1 | 0 || 0 1 | dark gray
|
|
* | 0 | 1 | 0 || 0 | 1 || 1 0 | light gray
|
|
* | 0 | 0 | 0 || 0 | 0 || 1 1 | white
|
|
*/
|
|
|
|
static const u8 st7586_lookup[] = { 0x7, 0x4, 0x2, 0x0 };
|
|
|
|
static void st7586_xrgb8888_to_gray332(u8 *dst, void *vaddr,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_clip_rect *clip)
|
|
{
|
|
size_t len = (clip->x2 - clip->x1) * (clip->y2 - clip->y1);
|
|
unsigned int x, y;
|
|
u8 *src, *buf, val;
|
|
|
|
buf = kmalloc(len, GFP_KERNEL);
|
|
if (!buf)
|
|
return;
|
|
|
|
tinydrm_xrgb8888_to_gray8(buf, vaddr, fb, clip);
|
|
src = buf;
|
|
|
|
for (y = clip->y1; y < clip->y2; y++) {
|
|
for (x = clip->x1; x < clip->x2; x += 3) {
|
|
val = st7586_lookup[*src++ >> 6] << 5;
|
|
val |= st7586_lookup[*src++ >> 6] << 2;
|
|
val |= st7586_lookup[*src++ >> 6] >> 1;
|
|
*dst++ = val;
|
|
}
|
|
}
|
|
|
|
kfree(buf);
|
|
}
|
|
|
|
static int st7586_buf_copy(void *dst, struct drm_framebuffer *fb,
|
|
struct drm_clip_rect *clip)
|
|
{
|
|
struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
|
|
struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
|
|
void *src = cma_obj->vaddr;
|
|
int ret = 0;
|
|
|
|
if (import_attach) {
|
|
ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
|
|
DMA_FROM_DEVICE);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
st7586_xrgb8888_to_gray332(dst, src, fb, clip);
|
|
|
|
if (import_attach)
|
|
ret = dma_buf_end_cpu_access(import_attach->dmabuf,
|
|
DMA_FROM_DEVICE);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int st7586_fb_dirty(struct drm_framebuffer *fb,
|
|
struct drm_file *file_priv, unsigned int flags,
|
|
unsigned int color, struct drm_clip_rect *clips,
|
|
unsigned int num_clips)
|
|
{
|
|
struct tinydrm_device *tdev = fb->dev->dev_private;
|
|
struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
|
|
struct drm_clip_rect clip;
|
|
int start, end;
|
|
int ret = 0;
|
|
|
|
if (!mipi->enabled)
|
|
return 0;
|
|
|
|
tinydrm_merge_clips(&clip, clips, num_clips, flags, fb->width,
|
|
fb->height);
|
|
|
|
/* 3 pixels per byte, so grow clip to nearest multiple of 3 */
|
|
clip.x1 = rounddown(clip.x1, 3);
|
|
clip.x2 = roundup(clip.x2, 3);
|
|
|
|
DRM_DEBUG("Flushing [FB:%d] x1=%u, x2=%u, y1=%u, y2=%u\n", fb->base.id,
|
|
clip.x1, clip.x2, clip.y1, clip.y2);
|
|
|
|
ret = st7586_buf_copy(mipi->tx_buf, fb, &clip);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Pixels are packed 3 per byte */
|
|
start = clip.x1 / 3;
|
|
end = clip.x2 / 3;
|
|
|
|
mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS,
|
|
(start >> 8) & 0xFF, start & 0xFF,
|
|
(end >> 8) & 0xFF, (end - 1) & 0xFF);
|
|
mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS,
|
|
(clip.y1 >> 8) & 0xFF, clip.y1 & 0xFF,
|
|
(clip.y2 >> 8) & 0xFF, (clip.y2 - 1) & 0xFF);
|
|
|
|
ret = mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START,
|
|
(u8 *)mipi->tx_buf,
|
|
(end - start) * (clip.y2 - clip.y1));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct drm_framebuffer_funcs st7586_fb_funcs = {
|
|
.destroy = drm_gem_fb_destroy,
|
|
.create_handle = drm_gem_fb_create_handle,
|
|
.dirty = tinydrm_fb_dirty,
|
|
};
|
|
|
|
static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct drm_plane_state *plane_state)
|
|
{
|
|
struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
|
|
struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
|
|
int ret;
|
|
u8 addr_mode;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
ret = mipi_dbi_poweron_reset(mipi);
|
|
if (ret)
|
|
return;
|
|
|
|
mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f);
|
|
mipi_dbi_command(mipi, ST7586_OTP_RW_CTRL, 0x00);
|
|
|
|
msleep(10);
|
|
|
|
mipi_dbi_command(mipi, ST7586_OTP_READ);
|
|
|
|
msleep(20);
|
|
|
|
mipi_dbi_command(mipi, ST7586_OTP_CTRL_OUT);
|
|
mipi_dbi_command(mipi, MIPI_DCS_EXIT_SLEEP_MODE);
|
|
mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF);
|
|
|
|
msleep(50);
|
|
|
|
mipi_dbi_command(mipi, ST7586_SET_VOP_OFFSET, 0x00);
|
|
mipi_dbi_command(mipi, ST7586_SET_VOP, 0xe3, 0x00);
|
|
mipi_dbi_command(mipi, ST7586_SET_BIAS_SYSTEM, 0x02);
|
|
mipi_dbi_command(mipi, ST7586_SET_BOOST_LEVEL, 0x04);
|
|
mipi_dbi_command(mipi, ST7586_ENABLE_ANALOG, 0x1d);
|
|
mipi_dbi_command(mipi, ST7586_SET_NLINE_INV, 0x00);
|
|
mipi_dbi_command(mipi, ST7586_DISP_MODE_GRAY);
|
|
mipi_dbi_command(mipi, ST7586_ENABLE_DDRAM, 0x02);
|
|
|
|
switch (mipi->rotation) {
|
|
default:
|
|
addr_mode = 0x00;
|
|
break;
|
|
case 90:
|
|
addr_mode = ST7586_DISP_CTRL_MY;
|
|
break;
|
|
case 180:
|
|
addr_mode = ST7586_DISP_CTRL_MX | ST7586_DISP_CTRL_MY;
|
|
break;
|
|
case 270:
|
|
addr_mode = ST7586_DISP_CTRL_MX;
|
|
break;
|
|
}
|
|
mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
|
|
|
|
mipi_dbi_command(mipi, ST7586_SET_DISP_DUTY, 0x7f);
|
|
mipi_dbi_command(mipi, ST7586_SET_PART_DISP, 0xa0);
|
|
mipi_dbi_command(mipi, MIPI_DCS_SET_PARTIAL_AREA, 0x00, 0x00, 0x00, 0x77);
|
|
mipi_dbi_command(mipi, MIPI_DCS_EXIT_INVERT_MODE);
|
|
|
|
msleep(100);
|
|
|
|
mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON);
|
|
|
|
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
|
|
}
|
|
|
|
static void st7586_pipe_disable(struct drm_simple_display_pipe *pipe)
|
|
{
|
|
struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
|
|
struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (!mipi->enabled)
|
|
return;
|
|
|
|
mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF);
|
|
mipi->enabled = false;
|
|
}
|
|
|
|
static const u32 st7586_formats[] = {
|
|
DRM_FORMAT_XRGB8888,
|
|
};
|
|
|
|
static int st7586_init(struct device *dev, struct mipi_dbi *mipi,
|
|
const struct drm_simple_display_pipe_funcs *pipe_funcs,
|
|
struct drm_driver *driver, const struct drm_display_mode *mode,
|
|
unsigned int rotation)
|
|
{
|
|
size_t bufsize = (mode->vdisplay + 2) / 3 * mode->hdisplay;
|
|
struct tinydrm_device *tdev = &mipi->tinydrm;
|
|
int ret;
|
|
|
|
mutex_init(&mipi->cmdlock);
|
|
|
|
mipi->tx_buf = devm_kmalloc(dev, bufsize, GFP_KERNEL);
|
|
if (!mipi->tx_buf)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_tinydrm_init(dev, tdev, &st7586_fb_funcs, driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tdev->fb_dirty = st7586_fb_dirty;
|
|
|
|
ret = tinydrm_display_pipe_init(tdev, pipe_funcs,
|
|
DRM_MODE_CONNECTOR_VIRTUAL,
|
|
st7586_formats,
|
|
ARRAY_SIZE(st7586_formats),
|
|
mode, rotation);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tdev->drm->mode_config.preferred_depth = 32;
|
|
mipi->rotation = rotation;
|
|
|
|
drm_mode_config_reset(tdev->drm);
|
|
|
|
DRM_DEBUG_KMS("preferred_depth=%u, rotation = %u\n",
|
|
tdev->drm->mode_config.preferred_depth, rotation);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_simple_display_pipe_funcs st7586_pipe_funcs = {
|
|
.enable = st7586_pipe_enable,
|
|
.disable = st7586_pipe_disable,
|
|
.update = tinydrm_display_pipe_update,
|
|
.prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
|
|
};
|
|
|
|
static const struct drm_display_mode st7586_mode = {
|
|
TINYDRM_MODE(178, 128, 37, 27),
|
|
};
|
|
|
|
DEFINE_DRM_GEM_CMA_FOPS(st7586_fops);
|
|
|
|
static struct drm_driver st7586_driver = {
|
|
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
|
|
DRIVER_ATOMIC,
|
|
.fops = &st7586_fops,
|
|
TINYDRM_GEM_DRIVER_OPS,
|
|
.debugfs_init = mipi_dbi_debugfs_init,
|
|
.name = "st7586",
|
|
.desc = "Sitronix ST7586",
|
|
.date = "20170801",
|
|
.major = 1,
|
|
.minor = 0,
|
|
};
|
|
|
|
static const struct of_device_id st7586_of_match[] = {
|
|
{ .compatible = "lego,ev3-lcd" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, st7586_of_match);
|
|
|
|
static const struct spi_device_id st7586_id[] = {
|
|
{ "ev3-lcd", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, st7586_id);
|
|
|
|
static int st7586_probe(struct spi_device *spi)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct mipi_dbi *mipi;
|
|
struct gpio_desc *a0;
|
|
u32 rotation = 0;
|
|
int ret;
|
|
|
|
mipi = devm_kzalloc(dev, sizeof(*mipi), GFP_KERNEL);
|
|
if (!mipi)
|
|
return -ENOMEM;
|
|
|
|
mipi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(mipi->reset)) {
|
|
DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
|
|
return PTR_ERR(mipi->reset);
|
|
}
|
|
|
|
a0 = devm_gpiod_get(dev, "a0", GPIOD_OUT_LOW);
|
|
if (IS_ERR(a0)) {
|
|
DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n");
|
|
return PTR_ERR(a0);
|
|
}
|
|
|
|
device_property_read_u32(dev, "rotation", &rotation);
|
|
|
|
ret = mipi_dbi_spi_init(spi, mipi, a0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Cannot read from this controller via SPI */
|
|
mipi->read_commands = NULL;
|
|
|
|
/*
|
|
* we are using 8-bit data, so we are not actually swapping anything,
|
|
* but setting mipi->swap_bytes makes mipi_dbi_typec3_command() do the
|
|
* right thing and not use 16-bit transfers (which results in swapped
|
|
* bytes on little-endian systems and causes out of order data to be
|
|
* sent to the display).
|
|
*/
|
|
mipi->swap_bytes = true;
|
|
|
|
ret = st7586_init(&spi->dev, mipi, &st7586_pipe_funcs, &st7586_driver,
|
|
&st7586_mode, rotation);
|
|
if (ret)
|
|
return ret;
|
|
|
|
spi_set_drvdata(spi, mipi);
|
|
|
|
return devm_tinydrm_register(&mipi->tinydrm);
|
|
}
|
|
|
|
static void st7586_shutdown(struct spi_device *spi)
|
|
{
|
|
struct mipi_dbi *mipi = spi_get_drvdata(spi);
|
|
|
|
tinydrm_shutdown(&mipi->tinydrm);
|
|
}
|
|
|
|
static struct spi_driver st7586_spi_driver = {
|
|
.driver = {
|
|
.name = "st7586",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = st7586_of_match,
|
|
},
|
|
.id_table = st7586_id,
|
|
.probe = st7586_probe,
|
|
.shutdown = st7586_shutdown,
|
|
};
|
|
module_spi_driver(st7586_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("Sitronix ST7586 DRM driver");
|
|
MODULE_AUTHOR("David Lechner <david@lechnology.com>");
|
|
MODULE_LICENSE("GPL");
|