forked from Minki/linux
d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
227 lines
4.8 KiB
C
227 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MAX1241 low-power, 12-bit serial ADC
|
|
*
|
|
* Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define MAX1241_VAL_MASK GENMASK(11, 0)
|
|
#define MAX1241_SHUTDOWN_DELAY_USEC 4
|
|
|
|
enum max1241_id {
|
|
max1241,
|
|
};
|
|
|
|
struct max1241 {
|
|
struct spi_device *spi;
|
|
struct mutex lock;
|
|
struct regulator *vdd;
|
|
struct regulator *vref;
|
|
struct gpio_desc *shutdown;
|
|
|
|
__be16 data ____cacheline_aligned;
|
|
};
|
|
|
|
static const struct iio_chan_spec max1241_channels[] = {
|
|
{
|
|
.type = IIO_VOLTAGE,
|
|
.indexed = 1,
|
|
.channel = 0,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
},
|
|
};
|
|
|
|
static int max1241_read(struct max1241 *adc)
|
|
{
|
|
struct spi_transfer xfers[] = {
|
|
/*
|
|
* Begin conversion by bringing /CS low for at least
|
|
* tconv us.
|
|
*/
|
|
{
|
|
.len = 0,
|
|
.delay.value = 8,
|
|
.delay.unit = SPI_DELAY_UNIT_USECS,
|
|
},
|
|
/*
|
|
* Then read two bytes of data in our RX buffer.
|
|
*/
|
|
{
|
|
.rx_buf = &adc->data,
|
|
.len = 2,
|
|
},
|
|
};
|
|
|
|
return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
|
|
}
|
|
|
|
static int max1241_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
int ret, vref_uV;
|
|
struct max1241 *adc = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&adc->lock);
|
|
|
|
if (adc->shutdown) {
|
|
gpiod_set_value(adc->shutdown, 0);
|
|
udelay(MAX1241_SHUTDOWN_DELAY_USEC);
|
|
ret = max1241_read(adc);
|
|
gpiod_set_value(adc->shutdown, 1);
|
|
} else
|
|
ret = max1241_read(adc);
|
|
|
|
if (ret) {
|
|
mutex_unlock(&adc->lock);
|
|
return ret;
|
|
}
|
|
|
|
*val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
|
|
|
|
mutex_unlock(&adc->lock);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
vref_uV = regulator_get_voltage(adc->vref);
|
|
|
|
if (vref_uV < 0)
|
|
return vref_uV;
|
|
|
|
*val = vref_uV / 1000;
|
|
*val2 = 12;
|
|
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info max1241_info = {
|
|
.read_raw = max1241_read_raw,
|
|
};
|
|
|
|
static void max1241_disable_vdd_action(void *data)
|
|
{
|
|
struct max1241 *adc = data;
|
|
struct device *dev = &adc->spi->dev;
|
|
int err;
|
|
|
|
err = regulator_disable(adc->vdd);
|
|
if (err)
|
|
dev_err(dev, "could not disable vdd regulator.\n");
|
|
}
|
|
|
|
static void max1241_disable_vref_action(void *data)
|
|
{
|
|
struct max1241 *adc = data;
|
|
struct device *dev = &adc->spi->dev;
|
|
int err;
|
|
|
|
err = regulator_disable(adc->vref);
|
|
if (err)
|
|
dev_err(dev, "could not disable vref regulator.\n");
|
|
}
|
|
|
|
static int max1241_probe(struct spi_device *spi)
|
|
{
|
|
struct device *dev = &spi->dev;
|
|
struct iio_dev *indio_dev;
|
|
struct max1241 *adc;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
adc = iio_priv(indio_dev);
|
|
adc->spi = spi;
|
|
mutex_init(&adc->lock);
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
adc->vdd = devm_regulator_get(dev, "vdd");
|
|
if (IS_ERR(adc->vdd)) {
|
|
dev_err(dev, "failed to get vdd regulator\n");
|
|
return PTR_ERR(adc->vdd);
|
|
}
|
|
|
|
ret = regulator_enable(adc->vdd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(dev, max1241_disable_vdd_action, adc);
|
|
if (ret) {
|
|
dev_err(dev, "could not set up vdd regulator cleanup action\n");
|
|
return ret;
|
|
}
|
|
|
|
adc->vref = devm_regulator_get(dev, "vref");
|
|
if (IS_ERR(adc->vref)) {
|
|
dev_err(dev, "failed to get vref regulator\n");
|
|
return PTR_ERR(adc->vref);
|
|
}
|
|
|
|
ret = regulator_enable(adc->vref);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(dev, max1241_disable_vref_action, adc);
|
|
if (ret) {
|
|
dev_err(dev, "could not set up vref regulator cleanup action\n");
|
|
return ret;
|
|
}
|
|
|
|
adc->shutdown = devm_gpiod_get_optional(dev, "shutdown",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(adc->shutdown))
|
|
return PTR_ERR(adc->shutdown);
|
|
|
|
if (adc->shutdown)
|
|
dev_dbg(dev, "shutdown pin passed, low-power mode enabled");
|
|
else
|
|
dev_dbg(dev, "no shutdown pin passed, low-power mode disabled");
|
|
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->info = &max1241_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = max1241_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
|
|
|
|
return devm_iio_device_register(dev, indio_dev);
|
|
}
|
|
|
|
static const struct spi_device_id max1241_id[] = {
|
|
{ "max1241", max1241 },
|
|
{}
|
|
};
|
|
|
|
static const struct of_device_id max1241_dt_ids[] = {
|
|
{ .compatible = "maxim,max1241" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max1241_dt_ids);
|
|
|
|
static struct spi_driver max1241_spi_driver = {
|
|
.driver = {
|
|
.name = "max1241",
|
|
.of_match_table = max1241_dt_ids,
|
|
},
|
|
.probe = max1241_probe,
|
|
.id_table = max1241_id,
|
|
};
|
|
module_spi_driver(max1241_spi_driver);
|
|
|
|
MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
|
|
MODULE_DESCRIPTION("MAX1241 ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|