forked from Minki/linux
372c187b8a
The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
931 lines
26 KiB
C
931 lines
26 KiB
C
/*******************************************************************
|
|
* This file is part of the Emulex Linux Device Driver for *
|
|
* Fibre Channel Host Bus Adapters. *
|
|
* Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
|
|
* “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
|
|
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
|
|
* EMULEX and SLI are trademarks of Emulex. *
|
|
* www.broadcom.com *
|
|
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or *
|
|
* modify it under the terms of version 2 of the GNU General *
|
|
* Public License as published by the Free Software Foundation. *
|
|
* This program is distributed in the hope that it will be useful. *
|
|
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
|
|
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
|
|
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
|
|
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
|
|
* TO BE LEGALLY INVALID. See the GNU General Public License for *
|
|
* more details, a copy of which can be found in the file COPYING *
|
|
* included with this package. *
|
|
*******************************************************************/
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/sched/signal.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
|
|
#include "lpfc_hw4.h"
|
|
#include "lpfc_hw.h"
|
|
#include "lpfc_sli.h"
|
|
#include "lpfc_sli4.h"
|
|
#include "lpfc_nl.h"
|
|
#include "lpfc_disc.h"
|
|
#include "lpfc_scsi.h"
|
|
#include "lpfc.h"
|
|
#include "lpfc_logmsg.h"
|
|
#include "lpfc_crtn.h"
|
|
#include "lpfc_version.h"
|
|
#include "lpfc_vport.h"
|
|
|
|
inline void lpfc_vport_set_state(struct lpfc_vport *vport,
|
|
enum fc_vport_state new_state)
|
|
{
|
|
struct fc_vport *fc_vport = vport->fc_vport;
|
|
|
|
if (fc_vport) {
|
|
/*
|
|
* When the transport defines fc_vport_set state we will replace
|
|
* this code with the following line
|
|
*/
|
|
/* fc_vport_set_state(fc_vport, new_state); */
|
|
if (new_state != FC_VPORT_INITIALIZING)
|
|
fc_vport->vport_last_state = fc_vport->vport_state;
|
|
fc_vport->vport_state = new_state;
|
|
}
|
|
|
|
/* for all the error states we will set the invternal state to FAILED */
|
|
switch (new_state) {
|
|
case FC_VPORT_NO_FABRIC_SUPP:
|
|
case FC_VPORT_NO_FABRIC_RSCS:
|
|
case FC_VPORT_FABRIC_LOGOUT:
|
|
case FC_VPORT_FABRIC_REJ_WWN:
|
|
case FC_VPORT_FAILED:
|
|
vport->port_state = LPFC_VPORT_FAILED;
|
|
break;
|
|
case FC_VPORT_LINKDOWN:
|
|
vport->port_state = LPFC_VPORT_UNKNOWN;
|
|
break;
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
}
|
|
|
|
int
|
|
lpfc_alloc_vpi(struct lpfc_hba *phba)
|
|
{
|
|
unsigned long vpi;
|
|
|
|
spin_lock_irq(&phba->hbalock);
|
|
/* Start at bit 1 because vpi zero is reserved for the physical port */
|
|
vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
|
|
if (vpi > phba->max_vpi)
|
|
vpi = 0;
|
|
else
|
|
set_bit(vpi, phba->vpi_bmask);
|
|
if (phba->sli_rev == LPFC_SLI_REV4)
|
|
phba->sli4_hba.max_cfg_param.vpi_used++;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
return vpi;
|
|
}
|
|
|
|
static void
|
|
lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
|
|
{
|
|
if (vpi == 0)
|
|
return;
|
|
spin_lock_irq(&phba->hbalock);
|
|
clear_bit(vpi, phba->vpi_bmask);
|
|
if (phba->sli_rev == LPFC_SLI_REV4)
|
|
phba->sli4_hba.max_cfg_param.vpi_used--;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
}
|
|
|
|
static int
|
|
lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
|
|
{
|
|
LPFC_MBOXQ_t *pmb;
|
|
MAILBOX_t *mb;
|
|
struct lpfc_dmabuf *mp;
|
|
int rc;
|
|
|
|
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
|
|
if (!pmb) {
|
|
return -ENOMEM;
|
|
}
|
|
mb = &pmb->u.mb;
|
|
|
|
rc = lpfc_read_sparam(phba, pmb, vport->vpi);
|
|
if (rc) {
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Grab buffer pointer and clear context1 so we can use
|
|
* lpfc_sli_issue_box_wait
|
|
*/
|
|
mp = (struct lpfc_dmabuf *)pmb->ctx_buf;
|
|
pmb->ctx_buf = NULL;
|
|
|
|
pmb->vport = vport;
|
|
rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
|
|
if (rc != MBX_SUCCESS) {
|
|
if (signal_pending(current)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1830 Signal aborted mbxCmd x%x\n",
|
|
mb->mbxCommand);
|
|
lpfc_mbuf_free(phba, mp->virt, mp->phys);
|
|
kfree(mp);
|
|
if (rc != MBX_TIMEOUT)
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return -EINTR;
|
|
} else {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1818 VPort failed init, mbxCmd x%x "
|
|
"READ_SPARM mbxStatus x%x, rc = x%x\n",
|
|
mb->mbxCommand, mb->mbxStatus, rc);
|
|
lpfc_mbuf_free(phba, mp->virt, mp->phys);
|
|
kfree(mp);
|
|
if (rc != MBX_TIMEOUT)
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
|
|
memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
|
|
sizeof (struct lpfc_name));
|
|
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
|
|
sizeof (struct lpfc_name));
|
|
|
|
lpfc_mbuf_free(phba, mp->virt, mp->phys);
|
|
kfree(mp);
|
|
mempool_free(pmb, phba->mbox_mem_pool);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
|
|
const char *name_type)
|
|
{
|
|
/* ensure that IEEE format 1 addresses
|
|
* contain zeros in bits 59-48
|
|
*/
|
|
if (!((wwn->u.wwn[0] >> 4) == 1 &&
|
|
((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
|
|
return 1;
|
|
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1822 Invalid %s: %02x:%02x:%02x:%02x:"
|
|
"%02x:%02x:%02x:%02x\n",
|
|
name_type,
|
|
wwn->u.wwn[0], wwn->u.wwn[1],
|
|
wwn->u.wwn[2], wwn->u.wwn[3],
|
|
wwn->u.wwn[4], wwn->u.wwn[5],
|
|
wwn->u.wwn[6], wwn->u.wwn[7]);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
|
|
{
|
|
struct lpfc_vport *vport;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&phba->port_list_lock, flags);
|
|
list_for_each_entry(vport, &phba->port_list, listentry) {
|
|
if (vport == new_vport)
|
|
continue;
|
|
/* If they match, return not unique */
|
|
if (memcmp(&vport->fc_sparam.portName,
|
|
&new_vport->fc_sparam.portName,
|
|
sizeof(struct lpfc_name)) == 0) {
|
|
spin_unlock_irqrestore(&phba->port_list_lock, flags);
|
|
return 0;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&phba->port_list_lock, flags);
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* lpfc_discovery_wait - Wait for driver discovery to quiesce
|
|
* @vport: The virtual port for which this call is being executed.
|
|
*
|
|
* This driver calls this routine specifically from lpfc_vport_delete
|
|
* to enforce a synchronous execution of vport
|
|
* delete relative to discovery activities. The
|
|
* lpfc_vport_delete routine should not return until it
|
|
* can reasonably guarantee that discovery has quiesced.
|
|
* Post FDISC LOGO, the driver must wait until its SAN teardown is
|
|
* complete and all resources recovered before allowing
|
|
* cleanup.
|
|
*
|
|
* This routine does not require any locks held.
|
|
**/
|
|
static void lpfc_discovery_wait(struct lpfc_vport *vport)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
uint32_t wait_flags = 0;
|
|
unsigned long wait_time_max;
|
|
unsigned long start_time;
|
|
|
|
wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE |
|
|
FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO;
|
|
|
|
/*
|
|
* The time constraint on this loop is a balance between the
|
|
* fabric RA_TOV value and dev_loss tmo. The driver's
|
|
* devloss_tmo is 10 giving this loop a 3x multiplier minimally.
|
|
*/
|
|
wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
|
|
wait_time_max += jiffies;
|
|
start_time = jiffies;
|
|
while (time_before(jiffies, wait_time_max)) {
|
|
if ((vport->num_disc_nodes > 0) ||
|
|
(vport->fc_flag & wait_flags) ||
|
|
((vport->port_state > LPFC_VPORT_FAILED) &&
|
|
(vport->port_state < LPFC_VPORT_READY))) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
|
|
"1833 Vport discovery quiesce Wait:"
|
|
" state x%x fc_flags x%x"
|
|
" num_nodes x%x, waiting 1000 msecs"
|
|
" total wait msecs x%x\n",
|
|
vport->port_state, vport->fc_flag,
|
|
vport->num_disc_nodes,
|
|
jiffies_to_msecs(jiffies - start_time));
|
|
msleep(1000);
|
|
} else {
|
|
/* Base case. Wait variants satisfied. Break out */
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
|
|
"1834 Vport discovery quiesced:"
|
|
" state x%x fc_flags x%x"
|
|
" wait msecs x%x\n",
|
|
vport->port_state, vport->fc_flag,
|
|
jiffies_to_msecs(jiffies
|
|
- start_time));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (time_after(jiffies, wait_time_max))
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1835 Vport discovery quiesce failed:"
|
|
" state x%x fc_flags x%x wait msecs x%x\n",
|
|
vport->port_state, vport->fc_flag,
|
|
jiffies_to_msecs(jiffies - start_time));
|
|
}
|
|
|
|
int
|
|
lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
|
|
{
|
|
struct lpfc_nodelist *ndlp;
|
|
struct Scsi_Host *shost = fc_vport->shost;
|
|
struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
|
|
struct lpfc_hba *phba = pport->phba;
|
|
struct lpfc_vport *vport = NULL;
|
|
int instance;
|
|
int vpi;
|
|
int rc = VPORT_ERROR;
|
|
int status;
|
|
|
|
if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1808 Create VPORT failed: "
|
|
"NPIV is not enabled: SLImode:%d\n",
|
|
phba->sli_rev);
|
|
rc = VPORT_INVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
/* NPIV is not supported if HBA has NVME Target enabled */
|
|
if (phba->nvmet_support) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
|
|
"3189 Create VPORT failed: "
|
|
"NPIV is not supported on NVME Target\n");
|
|
rc = VPORT_INVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
vpi = lpfc_alloc_vpi(phba);
|
|
if (vpi == 0) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1809 Create VPORT failed: "
|
|
"Max VPORTs (%d) exceeded\n",
|
|
phba->max_vpi);
|
|
rc = VPORT_NORESOURCES;
|
|
goto error_out;
|
|
}
|
|
|
|
/* Assign an unused board number */
|
|
if ((instance = lpfc_get_instance()) < 0) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1810 Create VPORT failed: Cannot get "
|
|
"instance number\n");
|
|
lpfc_free_vpi(phba, vpi);
|
|
rc = VPORT_NORESOURCES;
|
|
goto error_out;
|
|
}
|
|
|
|
vport = lpfc_create_port(phba, instance, &fc_vport->dev);
|
|
if (!vport) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1811 Create VPORT failed: vpi x%x\n", vpi);
|
|
lpfc_free_vpi(phba, vpi);
|
|
rc = VPORT_NORESOURCES;
|
|
goto error_out;
|
|
}
|
|
|
|
vport->vpi = vpi;
|
|
lpfc_debugfs_initialize(vport);
|
|
|
|
if ((status = lpfc_vport_sparm(phba, vport))) {
|
|
if (status == -EINTR) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1831 Create VPORT Interrupted.\n");
|
|
rc = VPORT_ERROR;
|
|
} else {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1813 Create VPORT failed. "
|
|
"Cannot get sparam\n");
|
|
rc = VPORT_NORESOURCES;
|
|
}
|
|
lpfc_free_vpi(phba, vpi);
|
|
destroy_port(vport);
|
|
goto error_out;
|
|
}
|
|
|
|
u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
|
|
u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
|
|
|
|
memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
|
|
memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
|
|
|
|
if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
|
|
!lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1821 Create VPORT failed. "
|
|
"Invalid WWN format\n");
|
|
lpfc_free_vpi(phba, vpi);
|
|
destroy_port(vport);
|
|
rc = VPORT_INVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
if (!lpfc_unique_wwpn(phba, vport)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1823 Create VPORT failed. "
|
|
"Duplicate WWN on HBA\n");
|
|
lpfc_free_vpi(phba, vpi);
|
|
destroy_port(vport);
|
|
rc = VPORT_INVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
/* Create binary sysfs attribute for vport */
|
|
lpfc_alloc_sysfs_attr(vport);
|
|
|
|
/* Set the DFT_LUN_Q_DEPTH accordingly */
|
|
vport->cfg_lun_queue_depth = phba->pport->cfg_lun_queue_depth;
|
|
|
|
/* Only the physical port can support NVME for now */
|
|
vport->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
|
|
|
|
*(struct lpfc_vport **)fc_vport->dd_data = vport;
|
|
vport->fc_vport = fc_vport;
|
|
|
|
/* At this point we are fully registered with SCSI Layer. */
|
|
vport->load_flag |= FC_ALLOW_FDMI;
|
|
if (phba->cfg_enable_SmartSAN ||
|
|
(phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
|
|
/* Setup appropriate attribute masks */
|
|
vport->fdmi_hba_mask = phba->pport->fdmi_hba_mask;
|
|
vport->fdmi_port_mask = phba->pport->fdmi_port_mask;
|
|
}
|
|
|
|
/*
|
|
* In SLI4, the vpi must be activated before it can be used
|
|
* by the port.
|
|
*/
|
|
if ((phba->sli_rev == LPFC_SLI_REV4) &&
|
|
(pport->fc_flag & FC_VFI_REGISTERED)) {
|
|
rc = lpfc_sli4_init_vpi(vport);
|
|
if (rc) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1838 Failed to INIT_VPI on vpi %d "
|
|
"status %d\n", vpi, rc);
|
|
rc = VPORT_NORESOURCES;
|
|
lpfc_free_vpi(phba, vpi);
|
|
goto error_out;
|
|
}
|
|
} else if (phba->sli_rev == LPFC_SLI_REV4) {
|
|
/*
|
|
* Driver cannot INIT_VPI now. Set the flags to
|
|
* init_vpi when reg_vfi complete.
|
|
*/
|
|
vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
|
|
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
|
|
rc = VPORT_OK;
|
|
goto out;
|
|
}
|
|
|
|
if ((phba->link_state < LPFC_LINK_UP) ||
|
|
(pport->port_state < LPFC_FABRIC_CFG_LINK) ||
|
|
(phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
|
|
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
|
|
rc = VPORT_OK;
|
|
goto out;
|
|
}
|
|
|
|
if (disable) {
|
|
lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
|
|
rc = VPORT_OK;
|
|
goto out;
|
|
}
|
|
|
|
/* Use the Physical nodes Fabric NDLP to determine if the link is
|
|
* up and ready to FDISC.
|
|
*/
|
|
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
|
|
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
|
|
ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
|
|
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
|
|
lpfc_set_disctmo(vport);
|
|
lpfc_initial_fdisc(vport);
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"0262 No NPIV Fabric support\n");
|
|
}
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
|
|
}
|
|
rc = VPORT_OK;
|
|
|
|
out:
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1825 Vport Created.\n");
|
|
lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
|
|
error_out:
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
disable_vport(struct fc_vport *fc_vport)
|
|
{
|
|
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
|
|
long timeout;
|
|
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
|
|
|
|
ndlp = lpfc_findnode_did(vport, Fabric_DID);
|
|
if (ndlp && NLP_CHK_NODE_ACT(ndlp)
|
|
&& phba->link_state >= LPFC_LINK_UP) {
|
|
vport->unreg_vpi_cmpl = VPORT_INVAL;
|
|
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
|
|
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
|
|
while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
|
|
timeout = schedule_timeout(timeout);
|
|
}
|
|
|
|
lpfc_sli_host_down(vport);
|
|
|
|
/* Mark all nodes for discovery so we can remove them by
|
|
* calling lpfc_cleanup_rpis(vport, 1)
|
|
*/
|
|
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
|
|
if (!NLP_CHK_NODE_ACT(ndlp))
|
|
continue;
|
|
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
|
|
continue;
|
|
lpfc_disc_state_machine(vport, ndlp, NULL,
|
|
NLP_EVT_DEVICE_RECOVERY);
|
|
}
|
|
lpfc_cleanup_rpis(vport, 1);
|
|
|
|
lpfc_stop_vport_timers(vport);
|
|
lpfc_unreg_all_rpis(vport);
|
|
lpfc_unreg_default_rpis(vport);
|
|
/*
|
|
* Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
|
|
* scsi_host_put() to release the vport.
|
|
*/
|
|
lpfc_mbx_unreg_vpi(vport);
|
|
if (phba->sli_rev == LPFC_SLI_REV4) {
|
|
spin_lock_irq(shost->host_lock);
|
|
vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
|
|
spin_unlock_irq(shost->host_lock);
|
|
}
|
|
|
|
lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1826 Vport Disabled.\n");
|
|
return VPORT_OK;
|
|
}
|
|
|
|
static int
|
|
enable_vport(struct fc_vport *fc_vport)
|
|
{
|
|
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_nodelist *ndlp = NULL;
|
|
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
|
|
|
|
if ((phba->link_state < LPFC_LINK_UP) ||
|
|
(phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
|
|
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
|
|
return VPORT_OK;
|
|
}
|
|
|
|
spin_lock_irq(shost->host_lock);
|
|
vport->load_flag |= FC_LOADING;
|
|
if (vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI) {
|
|
spin_unlock_irq(shost->host_lock);
|
|
lpfc_issue_init_vpi(vport);
|
|
goto out;
|
|
}
|
|
|
|
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
|
|
spin_unlock_irq(shost->host_lock);
|
|
|
|
/* Use the Physical nodes Fabric NDLP to determine if the link is
|
|
* up and ready to FDISC.
|
|
*/
|
|
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
|
|
if (ndlp && NLP_CHK_NODE_ACT(ndlp)
|
|
&& ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
|
|
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
|
|
lpfc_set_disctmo(vport);
|
|
lpfc_initial_fdisc(vport);
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"0264 No NPIV Fabric support\n");
|
|
}
|
|
} else {
|
|
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
|
|
}
|
|
|
|
out:
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1827 Vport Enabled.\n");
|
|
return VPORT_OK;
|
|
}
|
|
|
|
int
|
|
lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
|
|
{
|
|
if (disable)
|
|
return disable_vport(fc_vport);
|
|
else
|
|
return enable_vport(fc_vport);
|
|
}
|
|
|
|
|
|
int
|
|
lpfc_vport_delete(struct fc_vport *fc_vport)
|
|
{
|
|
struct lpfc_nodelist *ndlp = NULL;
|
|
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
|
|
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
|
|
struct lpfc_hba *phba = vport->phba;
|
|
long timeout;
|
|
bool ns_ndlp_referenced = false;
|
|
|
|
if (vport->port_type == LPFC_PHYSICAL_PORT) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1812 vport_delete failed: Cannot delete "
|
|
"physical host\n");
|
|
return VPORT_ERROR;
|
|
}
|
|
|
|
/* If the vport is a static vport fail the deletion. */
|
|
if ((vport->vport_flag & STATIC_VPORT) &&
|
|
!(phba->pport->load_flag & FC_UNLOADING)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1837 vport_delete failed: Cannot delete "
|
|
"static vport.\n");
|
|
return VPORT_ERROR;
|
|
}
|
|
spin_lock_irq(&phba->hbalock);
|
|
vport->load_flag |= FC_UNLOADING;
|
|
spin_unlock_irq(&phba->hbalock);
|
|
/*
|
|
* If we are not unloading the driver then prevent the vport_delete
|
|
* from happening until after this vport's discovery is finished.
|
|
*/
|
|
if (!(phba->pport->load_flag & FC_UNLOADING)) {
|
|
int check_count = 0;
|
|
while (check_count < ((phba->fc_ratov * 3) + 3) &&
|
|
vport->port_state > LPFC_VPORT_FAILED &&
|
|
vport->port_state < LPFC_VPORT_READY) {
|
|
check_count++;
|
|
msleep(1000);
|
|
}
|
|
if (vport->port_state > LPFC_VPORT_FAILED &&
|
|
vport->port_state < LPFC_VPORT_READY)
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* Take early refcount for outstanding I/O requests we schedule during
|
|
* delete processing for unreg_vpi. Always keep this before
|
|
* scsi_remove_host() as we can no longer obtain a reference through
|
|
* scsi_host_get() after scsi_host_remove as shost is set to SHOST_DEL.
|
|
*/
|
|
if (!scsi_host_get(shost))
|
|
return VPORT_INVAL;
|
|
|
|
lpfc_free_sysfs_attr(vport);
|
|
|
|
lpfc_debugfs_terminate(vport);
|
|
|
|
/*
|
|
* The call to fc_remove_host might release the NameServer ndlp. Since
|
|
* we might need to use the ndlp to send the DA_ID CT command,
|
|
* increment the reference for the NameServer ndlp to prevent it from
|
|
* being released.
|
|
*/
|
|
ndlp = lpfc_findnode_did(vport, NameServer_DID);
|
|
if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
|
|
lpfc_nlp_get(ndlp);
|
|
ns_ndlp_referenced = true;
|
|
}
|
|
|
|
/* Remove FC host and then SCSI host with the vport */
|
|
fc_remove_host(shost);
|
|
scsi_remove_host(shost);
|
|
|
|
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
|
|
|
|
/* In case of driver unload, we shall not perform fabric logo as the
|
|
* worker thread already stopped at this stage and, in this case, we
|
|
* can safely skip the fabric logo.
|
|
*/
|
|
if (phba->pport->load_flag & FC_UNLOADING) {
|
|
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
|
|
ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
|
|
phba->link_state >= LPFC_LINK_UP) {
|
|
/* First look for the Fabric ndlp */
|
|
ndlp = lpfc_findnode_did(vport, Fabric_DID);
|
|
if (!ndlp)
|
|
goto skip_logo;
|
|
else if (!NLP_CHK_NODE_ACT(ndlp)) {
|
|
ndlp = lpfc_enable_node(vport, ndlp,
|
|
NLP_STE_UNUSED_NODE);
|
|
if (!ndlp)
|
|
goto skip_logo;
|
|
}
|
|
/* Remove ndlp from vport npld list */
|
|
lpfc_dequeue_node(vport, ndlp);
|
|
|
|
/* Indicate free memory when release */
|
|
spin_lock_irq(&phba->ndlp_lock);
|
|
NLP_SET_FREE_REQ(ndlp);
|
|
spin_unlock_irq(&phba->ndlp_lock);
|
|
/* Kick off release ndlp when it can be safely done */
|
|
lpfc_nlp_put(ndlp);
|
|
}
|
|
goto skip_logo;
|
|
}
|
|
|
|
/* Otherwise, we will perform fabric logo as needed */
|
|
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
|
|
ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
|
|
phba->link_state >= LPFC_LINK_UP &&
|
|
phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
|
|
if (vport->cfg_enable_da_id) {
|
|
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
|
|
if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
|
|
while (vport->ct_flags && timeout)
|
|
timeout = schedule_timeout(timeout);
|
|
else
|
|
lpfc_printf_log(vport->phba, KERN_WARNING,
|
|
LOG_VPORT,
|
|
"1829 CT command failed to "
|
|
"delete objects on fabric\n");
|
|
}
|
|
/* First look for the Fabric ndlp */
|
|
ndlp = lpfc_findnode_did(vport, Fabric_DID);
|
|
if (!ndlp) {
|
|
/* Cannot find existing Fabric ndlp, allocate one */
|
|
ndlp = lpfc_nlp_init(vport, Fabric_DID);
|
|
if (!ndlp)
|
|
goto skip_logo;
|
|
/* Indicate free memory when release */
|
|
NLP_SET_FREE_REQ(ndlp);
|
|
} else {
|
|
if (!NLP_CHK_NODE_ACT(ndlp)) {
|
|
ndlp = lpfc_enable_node(vport, ndlp,
|
|
NLP_STE_UNUSED_NODE);
|
|
if (!ndlp)
|
|
goto skip_logo;
|
|
}
|
|
|
|
/* Remove ndlp from vport list */
|
|
lpfc_dequeue_node(vport, ndlp);
|
|
spin_lock_irq(&phba->ndlp_lock);
|
|
if (!NLP_CHK_FREE_REQ(ndlp))
|
|
/* Indicate free memory when release */
|
|
NLP_SET_FREE_REQ(ndlp);
|
|
else {
|
|
/* Skip this if ndlp is already in free mode */
|
|
spin_unlock_irq(&phba->ndlp_lock);
|
|
goto skip_logo;
|
|
}
|
|
spin_unlock_irq(&phba->ndlp_lock);
|
|
}
|
|
|
|
/*
|
|
* If the vpi is not registered, then a valid FDISC doesn't
|
|
* exist and there is no need for a ELS LOGO. Just cleanup
|
|
* the ndlp.
|
|
*/
|
|
if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) {
|
|
lpfc_nlp_put(ndlp);
|
|
goto skip_logo;
|
|
}
|
|
|
|
vport->unreg_vpi_cmpl = VPORT_INVAL;
|
|
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
|
|
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
|
|
while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
|
|
timeout = schedule_timeout(timeout);
|
|
}
|
|
|
|
if (!(phba->pport->load_flag & FC_UNLOADING))
|
|
lpfc_discovery_wait(vport);
|
|
|
|
skip_logo:
|
|
|
|
/*
|
|
* If the NameServer ndlp has been incremented to allow the DA_ID CT
|
|
* command to be sent, decrement the ndlp now.
|
|
*/
|
|
if (ns_ndlp_referenced) {
|
|
ndlp = lpfc_findnode_did(vport, NameServer_DID);
|
|
lpfc_nlp_put(ndlp);
|
|
}
|
|
|
|
lpfc_cleanup(vport);
|
|
lpfc_sli_host_down(vport);
|
|
|
|
lpfc_stop_vport_timers(vport);
|
|
|
|
if (!(phba->pport->load_flag & FC_UNLOADING)) {
|
|
lpfc_unreg_all_rpis(vport);
|
|
lpfc_unreg_default_rpis(vport);
|
|
/*
|
|
* Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
|
|
* does the scsi_host_put() to release the vport.
|
|
*/
|
|
if (!(vport->vpi_state & LPFC_VPI_REGISTERED) ||
|
|
lpfc_mbx_unreg_vpi(vport))
|
|
scsi_host_put(shost);
|
|
} else {
|
|
scsi_host_put(shost);
|
|
}
|
|
|
|
lpfc_free_vpi(phba, vport->vpi);
|
|
vport->work_port_events = 0;
|
|
spin_lock_irq(&phba->port_list_lock);
|
|
list_del_init(&vport->listentry);
|
|
spin_unlock_irq(&phba->port_list_lock);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
|
|
"1828 Vport Deleted.\n");
|
|
scsi_host_put(shost);
|
|
return VPORT_OK;
|
|
}
|
|
|
|
struct lpfc_vport **
|
|
lpfc_create_vport_work_array(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_vport *port_iterator;
|
|
struct lpfc_vport **vports;
|
|
int index = 0;
|
|
vports = kcalloc(phba->max_vports + 1, sizeof(struct lpfc_vport *),
|
|
GFP_KERNEL);
|
|
if (vports == NULL)
|
|
return NULL;
|
|
spin_lock_irq(&phba->port_list_lock);
|
|
list_for_each_entry(port_iterator, &phba->port_list, listentry) {
|
|
if (port_iterator->load_flag & FC_UNLOADING)
|
|
continue;
|
|
if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
|
|
lpfc_printf_vlog(port_iterator, KERN_ERR,
|
|
LOG_TRACE_EVENT,
|
|
"1801 Create vport work array FAILED: "
|
|
"cannot do scsi_host_get\n");
|
|
continue;
|
|
}
|
|
vports[index++] = port_iterator;
|
|
}
|
|
spin_unlock_irq(&phba->port_list_lock);
|
|
return vports;
|
|
}
|
|
|
|
void
|
|
lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
|
|
{
|
|
int i;
|
|
if (vports == NULL)
|
|
return;
|
|
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
|
|
scsi_host_put(lpfc_shost_from_vport(vports[i]));
|
|
kfree(vports);
|
|
}
|
|
|
|
|
|
/**
|
|
* lpfc_vport_reset_stat_data - Reset the statistical data for the vport
|
|
* @vport: Pointer to vport object.
|
|
*
|
|
* This function resets the statistical data for the vport. This function
|
|
* is called with the host_lock held
|
|
**/
|
|
void
|
|
lpfc_vport_reset_stat_data(struct lpfc_vport *vport)
|
|
{
|
|
struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
|
|
|
|
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
|
|
if (!NLP_CHK_NODE_ACT(ndlp))
|
|
continue;
|
|
if (ndlp->lat_data)
|
|
memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT *
|
|
sizeof(struct lpfc_scsicmd_bkt));
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* lpfc_alloc_bucket - Allocate data buffer required for statistical data
|
|
* @vport: Pointer to vport object.
|
|
*
|
|
* This function allocates data buffer required for all the FC
|
|
* nodes of the vport to collect statistical data.
|
|
**/
|
|
void
|
|
lpfc_alloc_bucket(struct lpfc_vport *vport)
|
|
{
|
|
struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
|
|
|
|
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
|
|
if (!NLP_CHK_NODE_ACT(ndlp))
|
|
continue;
|
|
|
|
kfree(ndlp->lat_data);
|
|
ndlp->lat_data = NULL;
|
|
|
|
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
|
|
ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT,
|
|
sizeof(struct lpfc_scsicmd_bkt),
|
|
GFP_ATOMIC);
|
|
|
|
if (!ndlp->lat_data)
|
|
lpfc_printf_vlog(vport, KERN_ERR,
|
|
LOG_TRACE_EVENT,
|
|
"0287 lpfc_alloc_bucket failed to "
|
|
"allocate statistical data buffer DID "
|
|
"0x%x\n", ndlp->nlp_DID);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* lpfc_free_bucket - Free data buffer required for statistical data
|
|
* @vport: Pointer to vport object.
|
|
*
|
|
* Th function frees statistical data buffer of all the FC
|
|
* nodes of the vport.
|
|
**/
|
|
void
|
|
lpfc_free_bucket(struct lpfc_vport *vport)
|
|
{
|
|
struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
|
|
|
|
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
|
|
if (!NLP_CHK_NODE_ACT(ndlp))
|
|
continue;
|
|
|
|
kfree(ndlp->lat_data);
|
|
ndlp->lat_data = NULL;
|
|
}
|
|
}
|