forked from Minki/linux
8ceafbfa91
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
296 lines
7.0 KiB
C
296 lines
7.0 KiB
C
/*
|
|
* SAMSUNG EXYNOS USB HOST OHCI Controller
|
|
*
|
|
* Copyright (C) 2011 Samsung Electronics Co.Ltd
|
|
* Author: Jingoo Han <jg1.han@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/usb/samsung_usb_phy.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include "ohci.h"
|
|
|
|
#define DRIVER_DESC "OHCI EXYNOS driver"
|
|
|
|
static const char hcd_name[] = "ohci-exynos";
|
|
static struct hc_driver __read_mostly exynos_ohci_hc_driver;
|
|
|
|
#define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
|
|
|
|
struct exynos_ohci_hcd {
|
|
struct clk *clk;
|
|
struct usb_phy *phy;
|
|
struct usb_otg *otg;
|
|
};
|
|
|
|
static void exynos_ohci_phy_enable(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
|
|
|
|
if (exynos_ohci->phy)
|
|
usb_phy_init(exynos_ohci->phy);
|
|
}
|
|
|
|
static void exynos_ohci_phy_disable(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
|
|
|
|
if (exynos_ohci->phy)
|
|
usb_phy_shutdown(exynos_ohci->phy);
|
|
}
|
|
|
|
static int exynos_ohci_probe(struct platform_device *pdev)
|
|
{
|
|
struct exynos_ohci_hcd *exynos_ohci;
|
|
struct usb_hcd *hcd;
|
|
struct resource *res;
|
|
struct usb_phy *phy;
|
|
int irq;
|
|
int err;
|
|
|
|
/*
|
|
* Right now device-tree probed devices don't get dma_mask set.
|
|
* Since shared usb code relies on it, set it here for now.
|
|
* Once we move to full device tree support this will vanish off.
|
|
*/
|
|
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (err)
|
|
return err;
|
|
|
|
hcd = usb_create_hcd(&exynos_ohci_hc_driver,
|
|
&pdev->dev, dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
dev_err(&pdev->dev, "Unable to create HCD\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
exynos_ohci = to_exynos_ohci(hcd);
|
|
|
|
if (of_device_is_compatible(pdev->dev.of_node,
|
|
"samsung,exynos5440-ohci"))
|
|
goto skip_phy;
|
|
|
|
phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
|
|
if (IS_ERR(phy)) {
|
|
usb_put_hcd(hcd);
|
|
dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
|
|
return -EPROBE_DEFER;
|
|
} else {
|
|
exynos_ohci->phy = phy;
|
|
exynos_ohci->otg = phy->otg;
|
|
}
|
|
|
|
skip_phy:
|
|
exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
|
|
|
|
if (IS_ERR(exynos_ohci->clk)) {
|
|
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
|
|
err = PTR_ERR(exynos_ohci->clk);
|
|
goto fail_clk;
|
|
}
|
|
|
|
err = clk_prepare_enable(exynos_ohci->clk);
|
|
if (err)
|
|
goto fail_clk;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "Failed to get I/O memory\n");
|
|
err = -ENXIO;
|
|
goto fail_io;
|
|
}
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
dev_err(&pdev->dev, "Failed to remap I/O memory\n");
|
|
err = -ENOMEM;
|
|
goto fail_io;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "Failed to get IRQ\n");
|
|
err = -ENODEV;
|
|
goto fail_io;
|
|
}
|
|
|
|
if (exynos_ohci->otg)
|
|
exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
|
|
|
|
platform_set_drvdata(pdev, hcd);
|
|
|
|
exynos_ohci_phy_enable(pdev);
|
|
|
|
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to add USB HCD\n");
|
|
goto fail_add_hcd;
|
|
}
|
|
return 0;
|
|
|
|
fail_add_hcd:
|
|
exynos_ohci_phy_disable(pdev);
|
|
fail_io:
|
|
clk_disable_unprepare(exynos_ohci->clk);
|
|
fail_clk:
|
|
usb_put_hcd(hcd);
|
|
return err;
|
|
}
|
|
|
|
static int exynos_ohci_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
if (exynos_ohci->otg)
|
|
exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
|
|
|
|
exynos_ohci_phy_disable(pdev);
|
|
|
|
clk_disable_unprepare(exynos_ohci->clk);
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_ohci_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
if (hcd->driver->shutdown)
|
|
hcd->driver->shutdown(hcd);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int exynos_ohci_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
|
|
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
unsigned long flags;
|
|
int rc = 0;
|
|
|
|
/*
|
|
* Root hub was already suspended. Disable irq emission and
|
|
* mark HW unaccessible, bail out if RH has been resumed. Use
|
|
* the spinlock to properly synchronize with possible pending
|
|
* RH suspend or resume activity.
|
|
*/
|
|
spin_lock_irqsave(&ohci->lock, flags);
|
|
if (ohci->rh_state != OHCI_RH_SUSPENDED &&
|
|
ohci->rh_state != OHCI_RH_HALTED) {
|
|
rc = -EINVAL;
|
|
goto fail;
|
|
}
|
|
|
|
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
|
|
if (exynos_ohci->otg)
|
|
exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
|
|
|
|
exynos_ohci_phy_disable(pdev);
|
|
|
|
clk_disable_unprepare(exynos_ohci->clk);
|
|
|
|
fail:
|
|
spin_unlock_irqrestore(&ohci->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int exynos_ohci_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
clk_prepare_enable(exynos_ohci->clk);
|
|
|
|
if (exynos_ohci->otg)
|
|
exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
|
|
|
|
exynos_ohci_phy_enable(pdev);
|
|
|
|
ohci_resume(hcd, false);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define exynos_ohci_suspend NULL
|
|
#define exynos_ohci_resume NULL
|
|
#endif
|
|
|
|
static const struct ohci_driver_overrides exynos_overrides __initconst = {
|
|
.extra_priv_size = sizeof(struct exynos_ohci_hcd),
|
|
};
|
|
|
|
static const struct dev_pm_ops exynos_ohci_pm_ops = {
|
|
.suspend = exynos_ohci_suspend,
|
|
.resume = exynos_ohci_resume,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id exynos_ohci_match[] = {
|
|
{ .compatible = "samsung,exynos4210-ohci" },
|
|
{ .compatible = "samsung,exynos5440-ohci" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, exynos_ohci_match);
|
|
#endif
|
|
|
|
static struct platform_driver exynos_ohci_driver = {
|
|
.probe = exynos_ohci_probe,
|
|
.remove = exynos_ohci_remove,
|
|
.shutdown = exynos_ohci_shutdown,
|
|
.driver = {
|
|
.name = "exynos-ohci",
|
|
.owner = THIS_MODULE,
|
|
.pm = &exynos_ohci_pm_ops,
|
|
.of_match_table = of_match_ptr(exynos_ohci_match),
|
|
}
|
|
};
|
|
static int __init ohci_exynos_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
|
|
ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides);
|
|
return platform_driver_register(&exynos_ohci_driver);
|
|
}
|
|
module_init(ohci_exynos_init);
|
|
|
|
static void __exit ohci_exynos_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&exynos_ohci_driver);
|
|
}
|
|
module_exit(ohci_exynos_cleanup);
|
|
|
|
MODULE_ALIAS("platform:exynos-ohci");
|
|
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
|
|
MODULE_LICENSE("GPL v2");
|