forked from Minki/linux
614b42426c
If we disable NAPI in the first place we can mask the device's interrupts (and halt it) without fearing that imask may be concurrently accessed from interrupt context, so there's no need to do local_irq_save() around gfar_halt_nodisable(). lock_rx_qs()/unlock_tx_qs() are just obsoleted and potentially buggy routines. The txlock is currently used in the driver only to manage TX congestion, it has nothing to do with halting the device. With these changes, the TX processing is stopped before gfar_halt(). Compact gfar_halt() is used instead of gfar_halt_nodisable(), as it disables Rx/TX DMA h/w blocks and the Rx/TX h/w queues. gfar_start() re-enables all these blocks on resume. Enabling the magic-packet mode remains the same, note that the RX block is re-enabled just before entering sleep mode. Add IRQF_NO_SUSPEND flag for the error interrupt line, to signal that the interrupt line must remain active during sleep in order to wake the system by magic packet (MAG) reception interrupt. (On some systems the MAG interrupt did trigger w/o this flag as well, but on others it didn't.) Without these fixes, when suspended during fair Tx traffic the interface occasionally failed to be woken up by magic packet. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| fs_enet | ||
| fec_main.c | ||
| fec_mpc52xx_phy.c | ||
| fec_mpc52xx.c | ||
| fec_mpc52xx.h | ||
| fec_ptp.c | ||
| fec.h | ||
| fsl_pq_mdio.c | ||
| gianfar_ethtool.c | ||
| gianfar_ptp.c | ||
| gianfar.c | ||
| gianfar.h | ||
| Kconfig | ||
| Makefile | ||
| ucc_geth_ethtool.c | ||
| ucc_geth.c | ||
| ucc_geth.h | ||
| xgmac_mdio.c | ||