forked from Minki/linux
434936c348
This patch adds the device tree binding documentation for the ST SDHCI driver. It documents the differences between the core properties described by mmc.txt and the properties used by the sdhci-st driver. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
34 lines
1.0 KiB
Plaintext
34 lines
1.0 KiB
Plaintext
* STMicroelectronics sdhci-st MMC/SD controller
|
|
|
|
This file documents the differences between the core properties in
|
|
Documentation/devicetree/bindings/mmc/mmc.txt and the properties
|
|
used by the sdhci-st driver.
|
|
|
|
Required properties:
|
|
- compatible : Must be "st,sdhci"
|
|
- clock-names : Should be "mmc"
|
|
See: Documentation/devicetree/bindings/resource-names.txt
|
|
- clocks : Phandle of the clock used by the sdhci controler
|
|
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Optional properties:
|
|
- non-removable: non-removable slot
|
|
See: Documentation/devicetree/bindings/mmc/mmc.txt
|
|
- bus-width: Number of data lines
|
|
See: Documentation/devicetree/bindings/mmc/mmc.txt
|
|
|
|
Example:
|
|
|
|
mmc0: sdhci@fe81e000 {
|
|
compatible = "st,sdhci";
|
|
status = "disabled";
|
|
reg = <0xfe81e000 0x1000>;
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
|
|
interrupt-names = "mmcirq";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mmc0>;
|
|
clock-names = "mmc";
|
|
clocks = <&clk_s_a1_ls 1>;
|
|
bus-width = <8>
|
|
};
|