leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5ea429638f
linux/scripts/kconfig/Makefile
Steven Rostedt 67d34a6a39 kconfig: Document oldnoconfig to what it really does 
The make target 'oldnoconfig' is a misnomer. It doesn't set new symbols
to 'n', but instead sets it to their default values.

Unfortunately, assuming that it actually did this, broke ktest in some
of its tests. For example, the tests to create a minimum config and even
a config bisect, depends on removing various configs and using
oldnoconfig to get rid of other configs that may have depended on it.

But because some configs that it was trying to disable, were in fact
default enabled, this caused those configs to re-enable and corrupt the
test.

I thought about fixing oldnoconfig, but I'm afraid that people are
already dependent on its current behavior. Instead, I'm just updating
the documentation to state that it sets the new symbols to their default
values and not to 'n'.

Ideally, this would be called, 'olddefconfig' and we have an
'oldnoconfig' that actually disables the new symbols. But it's useless
for me now. If it changed, ktest would need to be consistent between
each version, and that would be to difficult to detect. I'll handle this
issue with ktest with other means.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-26 14:32:01 +02:00

312 lines
11 KiB
Makefile
Raw Blame History

# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile
PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
localmodconfig localyesconfig
ifdef KBUILD_KCONFIG
Kconfig := $(KBUILD_KCONFIG)
else
Kconfig := Kconfig
endif
xconfig: $(obj)/qconf
$< $(Kconfig)
gconfig: $(obj)/gconf
$< $(Kconfig)
menuconfig: $(obj)/mconf
$< $(Kconfig)
config: $(obj)/conf
$< --oldaskconfig $(Kconfig)
nconfig: $(obj)/nconf
$< $(Kconfig)
oldconfig: $(obj)/conf
$< --$@ $(Kconfig)
silentoldconfig: $(obj)/conf
$(Q)mkdir -p include/generated
$< --$@ $(Kconfig)
localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
$(Q)mkdir -p include/generated
$(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
mv -f .tmp.config .config; \
$(obj)/conf --silentoldconfig $(Kconfig); \
mv -f .config.old.1 .config.old) \
else \
mv -f .tmp.config .config; \
$(obj)/conf --silentoldconfig $(Kconfig); \
fi
$(Q)rm -f .tmp.config
# Create new linux.pot file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
$(Q)echo " GEN config.pot"
$(Q)xgettext --default-domain=linux \
--add-comments --keyword=_ --keyword=N_ \
--from-code=UTF-8 \
--files-from=$(srctree)/scripts/kconfig/POTFILES.in \
--directory=$(srctree) --directory=$(objtree) \
--output $(obj)/config.pot
$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
$(Q)(for i in `ls $(srctree)/arch/*/Kconfig \
$(srctree)/arch/*/um/Kconfig`; \
do \
echo " GEN $$i"; \
$(obj)/kxgettext $$i \
>> $(obj)/config.pot; \
done )
$(Q)echo " GEN linux.pot"
$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
--output $(obj)/linux.pot
$(Q)rm -f $(obj)/config.pot
PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
$< --$@ $(Kconfig)
PHONY += listnewconfig oldnoconfig savedefconfig defconfig
listnewconfig oldnoconfig: $(obj)/conf
$< --$@ $(Kconfig)
savedefconfig: $(obj)/conf
$< --$@=defconfig $(Kconfig)
defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
$< --defconfig $(Kconfig)
else
@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
endif
%_defconfig: $(obj)/conf
$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
@echo ' nconfig - Update current config utilising a ncurses menu based program'
@echo ' menuconfig - Update current config utilising a menu based program'
@echo ' xconfig - Update current config utilising a QT based front-end'
@echo ' gconfig - Update current config utilising a GTK based front-end'
@echo ' oldconfig - Update current config utilising a provided .config as base'
@echo ' localmodconfig - Update current config disabling modules not loaded'
@echo ' localyesconfig - Update current config converting local mods to core'
@echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
@echo ' defconfig - New config with default from ARCH supplied defconfig'
@echo ' savedefconfig - Save current config as ./defconfig (minimal config)'
@echo ' allnoconfig - New config where all options are answered with no'
@echo ' allyesconfig - New config where all options are accepted with yes'
@echo ' allmodconfig - New config selecting modules when possible'
@echo ' alldefconfig - New config with all symbols set to default'
@echo ' randconfig - New config with random answer to all options'
@echo ' listnewconfig - List new options'
@echo ' oldnoconfig - Same as silentoldconfig but sets new symbols to their default value'
# lxdialog stuff
check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
# Use recursively expanded variables so we do not call gcc unless
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-DLOCALE
# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf: Used for defconfig, oldconfig and related targets
# nconf: Used for the nconfig target.
# Utilizes ncurses
# mconf: Used for the menuconfig target
# Utilizes the lxdialog package
# qconf: Used for the xconfig target
# Based on QT which needs to be installed to compile it
# gconf: Used for the gconfig target
# Based on GTK which needs to be installed to compile it
# object files used by all kconfig flavours
lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
conf-objs := conf.o zconf.tab.o
mconf-objs := mconf.o zconf.tab.o $(lxdialog)
nconf-objs := nconf.o zconf.tab.o nconf.gui.o
kxgettext-objs := kxgettext.o zconf.tab.o
qconf-cxxobjs := qconf.o
qconf-objs := zconf.tab.o
gconf-objs := gconf.o zconf.tab.o
hostprogs-y := conf
ifeq ($(MAKECMDGOALS),nconfig)
hostprogs-y += nconf
endif
ifeq ($(MAKECMDGOALS),menuconfig)
hostprogs-y += mconf
endif
ifeq ($(MAKECMDGOALS),update-po-config)
hostprogs-y += kxgettext
endif
ifeq ($(MAKECMDGOALS),xconfig)
qconf-target := 1
endif
ifeq ($(MAKECMDGOALS),gconfig)
gconf-target := 1
endif
ifeq ($(qconf-target),1)
hostprogs-y += qconf
endif
ifeq ($(gconf-target),1)
hostprogs-y += gconf
endif
clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
clean-files += mconf qconf gconf nconf
clean-files += config.pot linux.pot
# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
PHONY += $(obj)/dochecklxdialog
$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
$(obj)/dochecklxdialog:
$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
always := dochecklxdialog
# Add environment specific flags
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
# generated files seem to need this to find local include files
HOSTCFLAGS_zconf.lex.o := -I$(src)
HOSTCFLAGS_zconf.tab.o := -I$(src)
LEX_PREFIX_zconf := zconf
YACC_PREFIX_zconf := zconf
HOSTLOADLIBES_qconf = $(KC_QT_LIBS)
HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS)
HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
-Wno-missing-prototypes
HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOSTLOADLIBES_nconf = -lmenu -lpanel -lncurses
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
ifeq ($(qconf-target),1)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck
# QT needs some extra effort...
$(obj)/.tmp_qtcheck:
@set -e; echo " CHECK qt"; dir=""; pkg=""; \
if ! pkg-config --exists QtCore 2> /dev/null; then \
echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
pkg-config --exists qt 2> /dev/null && pkg=qt; \
pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
if [ -n "$$pkg" ]; then \
cflags="\$$(shell pkg-config $$pkg --cflags)"; \
libs="\$$(shell pkg-config $$pkg --libs)"; \
moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
dir="$$(pkg-config $$pkg --variable=prefix)"; \
else \
for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
done; \
if [ -z "$$dir" ]; then \
echo >&2 "*"; \
echo >&2 "* Unable to find any QT installation. Please make sure that"; \
echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \
echo >&2 "* either qmake can be found or install pkg-config or set"; \
echo >&2 "* the QTDIR environment variable to the correct location."; \
echo >&2 "*"; \
false; \
fi; \
libpath=$$dir/lib; lib=qt; osdir=""; \
$(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
test -f $$libpath/libqt-mt.so && lib=qt-mt; \
cflags="-I$$dir/include"; \
libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
moc="$$dir/bin/moc"; \
fi; \
if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
echo "*"; \
echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
echo "*"; \
moc="/usr/bin/moc"; \
fi; \
else \
cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \
[ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \
fi; \
echo "KC_QT_CFLAGS=$$cflags" > $@; \
echo "KC_QT_LIBS=$$libs" >> $@; \
echo "KC_QT_MOC=$$moc" >> $@
endif
$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
ifeq ($(gconf-target),1)
-include $(obj)/.tmp_gtkcheck
# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
touch $@; \
else \
echo >&2 "*"; \
echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \
echo >&2 "*"; \
false; \
fi \
else \
echo >&2 "*"; \
echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \
echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \
echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
echo >&2 "*"; \
false; \
fi
endif
$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c
$(obj)/qconf.o: $(obj)/qconf.moc
quiet_cmd_moc = MOC $@
cmd_moc = $(KC_QT_MOC) -i $< -o $@
$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck
$(call cmd,moc)
# Extract gconf menu items for I18N support
$(obj)/gconf.glade.h: $(obj)/gconf.glade
$(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \
$(obj)/gconf.glade
Reference in New Issue View Git Blame Copy Permalink