forked from Minki/linux
303ce7161c
The eMMC card vmmc-supply contained incorrectly two regulators: LDO20 and buck8. The second one is ignored. Additionally the buck8 is a vqmmc supply only on X and X2. On U3 the buck8 is providing power to the LAN (SMSC95xx) so instead the LDO22 should be used. Fix this by defining proper vmmc and vqmmc supplies for respective boards. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
97 lines
1.9 KiB
Plaintext
97 lines
1.9 KiB
Plaintext
/*
|
|
* Hardkernel's Exynos4412 based ODROID-X board device tree source
|
|
*
|
|
* Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
|
|
*
|
|
* Device tree source file for Hardkernel's ODROID-X board which is based
|
|
* on Samsung's Exynos4412 SoC.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos4412-odroid-common.dtsi"
|
|
|
|
/ {
|
|
model = "Hardkernel ODROID-X board based on Exynos4412";
|
|
compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
|
|
|
|
memory {
|
|
reg = <0x40000000 0x3FF00000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
led1 {
|
|
label = "led1:heart";
|
|
gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
led2 {
|
|
label = "led2:mmc0";
|
|
gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
pinctrl-0 = <&gpio_power_key &gpio_home_key>;
|
|
|
|
home_key {
|
|
interrupt-parent = <&gpx2>;
|
|
interrupts = <2 0>;
|
|
gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_HOME>;
|
|
label = "home key";
|
|
debounce-interval = <10>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
regulator_p3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "p3v3_en";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
/* VDDQ for MSHC (eMMC card) */
|
|
&buck8_reg {
|
|
regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
&ehci {
|
|
port@1 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mshc_0 {
|
|
vqmmc-supply = <&buck8_reg>;
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
gpio_home_key: home_key {
|
|
samsung,pins = "gpx2-2";
|
|
samsung,pin-pud = <0>;
|
|
};
|
|
};
|
|
|
|
&serial_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_3 {
|
|
status = "okay";
|
|
};
|