forked from Minki/linux
9b174527e7
In the media drivers, the v4l2 core knows about all submodules and calls into them from a common function. However this cannot work if the modules that get called are loadable and the core is built-in. In that case we get drivers/built-in.o: In function `set_type': drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach' drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach' drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach' drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach' This was working previously, until the IS_ENABLED() macro was used to replace the construct like #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) with the difference that the new code no longer checks whether it is being built as a loadable module itself. To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates true in exactly the condition that was used previously. The downside of this is that this trades an obvious link error for a more subtle runtime failure, but it is clear that the change that introduced the link error was unintentional and it seems better to revert it for now. Also, a similar change was originally created by Trent Piepho and then reverted by teh change to the IS_ENABLED macro. Ideally Kconfig would be used to avoid the case of a broken dependency, or the code restructured in a way to turn around the dependency, but either way would require much larger changes here. Fixes:7b34be71db
("[media] use IS_ENABLED() macro") See-also:c5dec9fb24
("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
150 lines
4.2 KiB
C
150 lines
4.2 KiB
C
/*
|
|
Driver for Philips tda1004xh OFDM Frontend
|
|
|
|
(c) 2004 Andrew de Quincey
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
#ifndef TDA1004X_H
|
|
#define TDA1004X_H
|
|
|
|
#include <linux/dvb/frontend.h>
|
|
#include <linux/firmware.h>
|
|
|
|
enum tda10046_xtal {
|
|
TDA10046_XTAL_4M,
|
|
TDA10046_XTAL_16M,
|
|
};
|
|
|
|
enum tda10046_agc {
|
|
TDA10046_AGC_DEFAULT, /* original configuration */
|
|
TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */
|
|
TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */
|
|
TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
|
|
};
|
|
|
|
/* Many (hybrid) boards use GPIO 1 and 3
|
|
GPIO1 analog - dvb switch
|
|
GPIO3 firmware eeprom address switch
|
|
*/
|
|
enum tda10046_gpio {
|
|
TDA10046_GPTRI = 0x00, /* All GPIOs tristate */
|
|
TDA10046_GP00 = 0x40, /* GPIO3=0, GPIO1=0 */
|
|
TDA10046_GP01 = 0x42, /* GPIO3=0, GPIO1=1 */
|
|
TDA10046_GP10 = 0x48, /* GPIO3=1, GPIO1=0 */
|
|
TDA10046_GP11 = 0x4a, /* GPIO3=1, GPIO1=1 */
|
|
TDA10046_GP00_I = 0x80, /* GPIO3=0, GPIO1=0, invert in sleep mode*/
|
|
TDA10046_GP01_I = 0x82, /* GPIO3=0, GPIO1=1, invert in sleep mode */
|
|
TDA10046_GP10_I = 0x88, /* GPIO3=1, GPIO1=0, invert in sleep mode */
|
|
TDA10046_GP11_I = 0x8a, /* GPIO3=1, GPIO1=1, invert in sleep mode */
|
|
};
|
|
|
|
enum tda10046_if {
|
|
TDA10046_FREQ_3617, /* original config, 36,166 MHZ */
|
|
TDA10046_FREQ_3613, /* 36,13 MHZ */
|
|
TDA10046_FREQ_045, /* low IF, 4.0, 4.5, or 5.0 MHZ */
|
|
TDA10046_FREQ_052, /* low IF, 5.1667 MHZ for tda9889 */
|
|
};
|
|
|
|
enum tda10046_tsout {
|
|
TDA10046_TS_PARALLEL = 0x00, /* parallel transport stream, default */
|
|
TDA10046_TS_SERIAL = 0x01, /* serial transport stream */
|
|
};
|
|
|
|
struct tda1004x_config
|
|
{
|
|
/* the demodulator's i2c address */
|
|
u8 demod_address;
|
|
|
|
/* does the "inversion" need inverted? */
|
|
u8 invert;
|
|
|
|
/* Does the OCLK signal need inverted? */
|
|
u8 invert_oclk;
|
|
|
|
/* parallel or serial transport stream */
|
|
enum tda10046_tsout ts_mode;
|
|
|
|
/* Xtal frequency, 4 or 16MHz*/
|
|
enum tda10046_xtal xtal_freq;
|
|
|
|
/* IF frequency */
|
|
enum tda10046_if if_freq;
|
|
|
|
/* AGC configuration */
|
|
enum tda10046_agc agc_config;
|
|
|
|
/* setting of GPIO1 and 3 */
|
|
enum tda10046_gpio gpio_config;
|
|
|
|
/* slave address and configuration of the tuner */
|
|
u8 tuner_address;
|
|
u8 antenna_switch;
|
|
|
|
/* if the board uses another I2c Bridge (tda8290), its address */
|
|
u8 i2c_gate;
|
|
|
|
/* request firmware for device */
|
|
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
|
|
};
|
|
|
|
enum tda1004x_demod {
|
|
TDA1004X_DEMOD_TDA10045,
|
|
TDA1004X_DEMOD_TDA10046,
|
|
};
|
|
|
|
struct tda1004x_state {
|
|
struct i2c_adapter* i2c;
|
|
const struct tda1004x_config* config;
|
|
struct dvb_frontend frontend;
|
|
|
|
/* private demod data */
|
|
enum tda1004x_demod demod_type;
|
|
};
|
|
|
|
#if IS_REACHABLE(CONFIG_DVB_TDA1004X)
|
|
extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
|
|
struct i2c_adapter* i2c);
|
|
|
|
extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
|
|
struct i2c_adapter* i2c);
|
|
#else
|
|
static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
|
|
return NULL;
|
|
}
|
|
static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
|
|
return NULL;
|
|
}
|
|
#endif // CONFIG_DVB_TDA1004X
|
|
|
|
static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
|
|
int r = 0;
|
|
u8 buf[] = {reg, val};
|
|
if (fe->ops.write)
|
|
r = fe->ops.write(fe, buf, 2);
|
|
return r;
|
|
}
|
|
|
|
#endif // TDA1004X_H
|