forked from Minki/linux
2fb0e047f9
If the PLP given is NO_STREAM_ID_FILTER (~0u) don't try to set that into the PLP register. Set PLP to 0 instead. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
781 lines
19 KiB
C
781 lines
19 KiB
C
/*
|
|
* Panasonic MN88473 DVB-T/T2/C demodulator driver
|
|
*
|
|
* Copyright (C) 2014 Antti Palosaari <crope@iki.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "mn88473_priv.h"
|
|
|
|
static int mn88473_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *s)
|
|
{
|
|
s->min_delay_ms = 1000;
|
|
return 0;
|
|
}
|
|
|
|
static int mn88473_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct i2c_client *client = fe->demodulator_priv;
|
|
struct mn88473_dev *dev = i2c_get_clientdata(client);
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i;
|
|
unsigned int uitmp;
|
|
u32 if_frequency;
|
|
u8 delivery_system_val, if_val[3], *conf_val_ptr;
|
|
u8 reg_bank2_2d_val, reg_bank0_d2_val;
|
|
|
|
dev_dbg(&client->dev,
|
|
"delivery_system=%u modulation=%u frequency=%u bandwidth_hz=%u symbol_rate=%u inversion=%d stream_id=%d\n",
|
|
c->delivery_system, c->modulation, c->frequency,
|
|
c->bandwidth_hz, c->symbol_rate, c->inversion, c->stream_id);
|
|
|
|
if (!dev->active) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBT:
|
|
delivery_system_val = 0x02;
|
|
reg_bank2_2d_val = 0x23;
|
|
reg_bank0_d2_val = 0x2a;
|
|
break;
|
|
case SYS_DVBT2:
|
|
delivery_system_val = 0x03;
|
|
reg_bank2_2d_val = 0x3b;
|
|
reg_bank0_d2_val = 0x29;
|
|
break;
|
|
case SYS_DVBC_ANNEX_A:
|
|
delivery_system_val = 0x04;
|
|
reg_bank2_2d_val = 0x3b;
|
|
reg_bank0_d2_val = 0x29;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBT:
|
|
case SYS_DVBT2:
|
|
switch (c->bandwidth_hz) {
|
|
case 6000000:
|
|
conf_val_ptr = "\xe9\x55\x55\x1c\x29\x1c\x29";
|
|
break;
|
|
case 7000000:
|
|
conf_val_ptr = "\xc8\x00\x00\x17\x0a\x17\x0a";
|
|
break;
|
|
case 8000000:
|
|
conf_val_ptr = "\xaf\x00\x00\x11\xec\x11\xec";
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
break;
|
|
case SYS_DVBC_ANNEX_A:
|
|
conf_val_ptr = "\x10\xab\x0d\xae\x1d\x9d";
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Program tuner */
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
ret = fe->ops.tuner_ops.set_params(fe);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
if (fe->ops.tuner_ops.get_if_frequency) {
|
|
ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "get_if_frequency=%u\n", if_frequency);
|
|
} else {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* Calculate IF registers */
|
|
uitmp = DIV_ROUND_CLOSEST_ULL((u64) if_frequency * 0x1000000, dev->clk);
|
|
if_val[0] = (uitmp >> 16) & 0xff;
|
|
if_val[1] = (uitmp >> 8) & 0xff;
|
|
if_val[2] = (uitmp >> 0) & 0xff;
|
|
|
|
ret = regmap_write(dev->regmap[2], 0x05, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0xfb, 0x13);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0xef, 0x13);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0xf9, 0x13);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x00, 0x18);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x01, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x02, 0x21);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x03, delivery_system_val);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x0b, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
for (i = 0; i < sizeof(if_val); i++) {
|
|
ret = regmap_write(dev->regmap[2], 0x10 + i, if_val[i]);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBT:
|
|
case SYS_DVBT2:
|
|
for (i = 0; i < 7; i++) {
|
|
ret = regmap_write(dev->regmap[2], 0x13 + i,
|
|
conf_val_ptr[i]);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
break;
|
|
case SYS_DVBC_ANNEX_A:
|
|
ret = regmap_bulk_write(dev->regmap[1], 0x10, conf_val_ptr, 6);
|
|
if (ret)
|
|
goto err;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap[2], 0x2d, reg_bank2_2d_val);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x2e, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x56, 0x0d);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_bulk_write(dev->regmap[0], 0x01,
|
|
"\xba\x13\x80\xba\x91\xdd\xe7\x28", 8);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x0a, 0x1a);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x13, 0x1f);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x19, 0x03);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x1d, 0xb0);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x2a, 0x72);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x2d, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x3c, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0x3f, 0xf8);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_bulk_write(dev->regmap[0], 0x40, "\xf4\x08", 2);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0xd2, reg_bank0_d2_val);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0xd4, 0x55);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[1], 0xbe, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0xb2, 0x37);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[0], 0xd7, 0x04);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* PLP */
|
|
if (c->delivery_system == SYS_DVBT2) {
|
|
ret = regmap_write(dev->regmap[2], 0x36,
|
|
(c->stream_id == NO_STREAM_ID_FILTER) ? 0 :
|
|
c->stream_id );
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* Reset FSM */
|
|
ret = regmap_write(dev->regmap[2], 0xf8, 0x9f);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int mn88473_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct i2c_client *client = fe->demodulator_priv;
|
|
struct mn88473_dev *dev = i2c_get_clientdata(client);
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, stmp;
|
|
unsigned int utmp, utmp1, utmp2;
|
|
u8 buf[5];
|
|
|
|
if (!dev->active) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
/* Lock detection */
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBT:
|
|
ret = regmap_read(dev->regmap[0], 0x62, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!(utmp & 0xa0)) {
|
|
if ((utmp & 0x0f) >= 0x09)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
else if ((utmp & 0x0f) >= 0x03)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
|
|
} else {
|
|
*status = 0;
|
|
}
|
|
break;
|
|
case SYS_DVBT2:
|
|
ret = regmap_read(dev->regmap[2], 0x8b, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!(utmp & 0x40)) {
|
|
if ((utmp & 0x0f) >= 0x0d)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
else if ((utmp & 0x0f) >= 0x0a)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI;
|
|
else if ((utmp & 0x0f) >= 0x07)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
|
|
} else {
|
|
*status = 0;
|
|
}
|
|
break;
|
|
case SYS_DVBC_ANNEX_A:
|
|
ret = regmap_read(dev->regmap[1], 0x85, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!(utmp & 0x40)) {
|
|
ret = regmap_read(dev->regmap[1], 0x89, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (utmp & 0x01)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
} else {
|
|
*status = 0;
|
|
}
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* Signal strength */
|
|
if (*status & FE_HAS_SIGNAL) {
|
|
for (i = 0; i < 2; i++) {
|
|
ret = regmap_bulk_read(dev->regmap[2], 0x86 + i,
|
|
&buf[i], 1);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* AGCRD[15:6] gives us a 10bit value ([5:0] are always 0) */
|
|
utmp1 = buf[0] << 8 | buf[1] << 0 | buf[0] >> 2;
|
|
dev_dbg(&client->dev, "strength=%u\n", utmp1);
|
|
|
|
c->strength.stat[0].scale = FE_SCALE_RELATIVE;
|
|
c->strength.stat[0].uvalue = utmp1;
|
|
} else {
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
/* CNR */
|
|
if (*status & FE_HAS_VITERBI && c->delivery_system == SYS_DVBT) {
|
|
/* DVB-T CNR */
|
|
ret = regmap_bulk_read(dev->regmap[0], 0x8f, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp = buf[0] << 8 | buf[1] << 0;
|
|
if (utmp) {
|
|
/* CNR[dB]: 10 * (log10(65536 / value) + 0.2) */
|
|
/* log10(65536) = 80807124, 0.2 = 3355443 */
|
|
stmp = div_u64(((u64)80807124 - intlog10(utmp)
|
|
+ 3355443) * 10000, 1 << 24);
|
|
dev_dbg(&client->dev, "cnr=%d value=%u\n", stmp, utmp);
|
|
} else {
|
|
stmp = 0;
|
|
}
|
|
|
|
c->cnr.stat[0].svalue = stmp;
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
} else if (*status & FE_HAS_VITERBI &&
|
|
c->delivery_system == SYS_DVBT2) {
|
|
/* DVB-T2 CNR */
|
|
for (i = 0; i < 3; i++) {
|
|
ret = regmap_bulk_read(dev->regmap[2], 0xb7 + i,
|
|
&buf[i], 1);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
utmp = buf[1] << 8 | buf[2] << 0;
|
|
utmp1 = (buf[0] >> 2) & 0x01; /* 0=SISO, 1=MISO */
|
|
if (utmp) {
|
|
if (utmp1) {
|
|
/* CNR[dB]: 10 * (log10(16384 / value) - 0.6) */
|
|
/* log10(16384) = 70706234, 0.6 = 10066330 */
|
|
stmp = div_u64(((u64)70706234 - intlog10(utmp)
|
|
- 10066330) * 10000, 1 << 24);
|
|
dev_dbg(&client->dev, "cnr=%d value=%u MISO\n",
|
|
stmp, utmp);
|
|
} else {
|
|
/* CNR[dB]: 10 * (log10(65536 / value) + 0.2) */
|
|
/* log10(65536) = 80807124, 0.2 = 3355443 */
|
|
stmp = div_u64(((u64)80807124 - intlog10(utmp)
|
|
+ 3355443) * 10000, 1 << 24);
|
|
dev_dbg(&client->dev, "cnr=%d value=%u SISO\n",
|
|
stmp, utmp);
|
|
}
|
|
} else {
|
|
stmp = 0;
|
|
}
|
|
|
|
c->cnr.stat[0].svalue = stmp;
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
} else if (*status & FE_HAS_VITERBI &&
|
|
c->delivery_system == SYS_DVBC_ANNEX_A) {
|
|
/* DVB-C CNR */
|
|
ret = regmap_bulk_read(dev->regmap[1], 0xa1, buf, 4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp1 = buf[0] << 8 | buf[1] << 0; /* signal */
|
|
utmp2 = buf[2] << 8 | buf[3] << 0; /* noise */
|
|
if (utmp1 && utmp2) {
|
|
/* CNR[dB]: 10 * log10(8 * (signal / noise)) */
|
|
/* log10(8) = 15151336 */
|
|
stmp = div_u64(((u64)15151336 + intlog10(utmp1)
|
|
- intlog10(utmp2)) * 10000, 1 << 24);
|
|
dev_dbg(&client->dev, "cnr=%d signal=%u noise=%u\n",
|
|
stmp, utmp1, utmp2);
|
|
} else {
|
|
stmp = 0;
|
|
}
|
|
|
|
c->cnr.stat[0].svalue = stmp;
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
} else {
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
/* BER */
|
|
if (*status & FE_HAS_LOCK && (c->delivery_system == SYS_DVBT ||
|
|
c->delivery_system == SYS_DVBC_ANNEX_A)) {
|
|
/* DVB-T & DVB-C BER */
|
|
ret = regmap_bulk_read(dev->regmap[0], 0x92, buf, 5);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp1 = buf[0] << 16 | buf[1] << 8 | buf[2] << 0;
|
|
utmp2 = buf[3] << 8 | buf[4] << 0;
|
|
utmp2 = utmp2 * 8 * 204;
|
|
dev_dbg(&client->dev, "post_bit_error=%u post_bit_count=%u\n",
|
|
utmp1, utmp2);
|
|
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue += utmp1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue += utmp2;
|
|
} else {
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
/* PER */
|
|
if (*status & FE_HAS_LOCK) {
|
|
ret = regmap_bulk_read(dev->regmap[0], 0xdd, buf, 4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp1 = buf[0] << 8 | buf[1] << 0;
|
|
utmp2 = buf[2] << 8 | buf[3] << 0;
|
|
dev_dbg(&client->dev, "block_error=%u block_count=%u\n",
|
|
utmp1, utmp2);
|
|
|
|
c->block_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_error.stat[0].uvalue += utmp1;
|
|
c->block_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->block_count.stat[0].uvalue += utmp2;
|
|
} else {
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int mn88473_init(struct dvb_frontend *fe)
|
|
{
|
|
struct i2c_client *client = fe->demodulator_priv;
|
|
struct mn88473_dev *dev = i2c_get_clientdata(client);
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, len, remain;
|
|
unsigned int uitmp;
|
|
const struct firmware *fw;
|
|
const char *name = MN88473_FIRMWARE;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* Check if firmware is already running */
|
|
ret = regmap_read(dev->regmap[0], 0xf5, &uitmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!(uitmp & 0x01))
|
|
goto warm;
|
|
|
|
/* Request the firmware, this will block and timeout */
|
|
ret = request_firmware(&fw, name, &client->dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware file '%s' not found\n", name);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "downloading firmware from file '%s'\n", name);
|
|
|
|
ret = regmap_write(dev->regmap[0], 0xf5, 0x03);
|
|
if (ret)
|
|
goto err_release_firmware;
|
|
|
|
for (remain = fw->size; remain > 0; remain -= (dev->i2c_wr_max - 1)) {
|
|
len = min(dev->i2c_wr_max - 1, remain);
|
|
ret = regmap_bulk_write(dev->regmap[0], 0xf6,
|
|
&fw->data[fw->size - remain], len);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware download failed %d\n",
|
|
ret);
|
|
goto err_release_firmware;
|
|
}
|
|
}
|
|
|
|
release_firmware(fw);
|
|
|
|
/* Parity check of firmware */
|
|
ret = regmap_read(dev->regmap[0], 0xf8, &uitmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (uitmp & 0x10) {
|
|
dev_err(&client->dev, "firmware parity check failed\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap[0], 0xf5, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
warm:
|
|
/* TS config */
|
|
ret = regmap_write(dev->regmap[2], 0x09, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap[2], 0x08, 0x1d);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev->active = true;
|
|
|
|
/* init stats here to indicate which stats are supported */
|
|
c->strength.len = 1;
|
|
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.len = 1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_error.len = 1;
|
|
c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->block_count.len = 1;
|
|
c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
return 0;
|
|
err_release_firmware:
|
|
release_firmware(fw);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int mn88473_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct i2c_client *client = fe->demodulator_priv;
|
|
struct mn88473_dev *dev = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
dev->active = false;
|
|
|
|
ret = regmap_write(dev->regmap[2], 0x05, 0x3e);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops mn88473_ops = {
|
|
.delsys = {SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A},
|
|
.info = {
|
|
.name = "Panasonic MN88473",
|
|
.symbol_rate_min = 1000000,
|
|
.symbol_rate_max = 7200000,
|
|
.caps = FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_32 |
|
|
FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_128 |
|
|
FE_CAN_QAM_256 |
|
|
FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_MUTE_TS |
|
|
FE_CAN_2G_MODULATION |
|
|
FE_CAN_MULTISTREAM
|
|
},
|
|
|
|
.get_tune_settings = mn88473_get_tune_settings,
|
|
|
|
.init = mn88473_init,
|
|
.sleep = mn88473_sleep,
|
|
|
|
.set_frontend = mn88473_set_frontend,
|
|
|
|
.read_status = mn88473_read_status,
|
|
};
|
|
|
|
static int mn88473_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mn88473_config *config = client->dev.platform_data;
|
|
struct mn88473_dev *dev;
|
|
int ret;
|
|
unsigned int uitmp;
|
|
static const struct regmap_config regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* Caller really need to provide pointer for frontend we create */
|
|
if (config->fe == NULL) {
|
|
dev_err(&client->dev, "frontend pointer not defined\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (dev == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
if (config->i2c_wr_max)
|
|
dev->i2c_wr_max = config->i2c_wr_max;
|
|
else
|
|
dev->i2c_wr_max = ~0;
|
|
|
|
if (config->xtal)
|
|
dev->clk = config->xtal;
|
|
else
|
|
dev->clk = 25000000;
|
|
dev->client[0] = client;
|
|
dev->regmap[0] = regmap_init_i2c(dev->client[0], ®map_config);
|
|
if (IS_ERR(dev->regmap[0])) {
|
|
ret = PTR_ERR(dev->regmap[0]);
|
|
goto err_kfree;
|
|
}
|
|
|
|
/*
|
|
* Chip has three I2C addresses for different register banks. Used
|
|
* addresses are 0x18, 0x1a and 0x1c. We register two dummy clients,
|
|
* 0x1a and 0x1c, in order to get own I2C client for each register bank.
|
|
*
|
|
* Also, register bank 2 do not support sequential I/O. Only single
|
|
* register write or read is allowed to that bank.
|
|
*/
|
|
dev->client[1] = i2c_new_dummy(client->adapter, 0x1a);
|
|
if (dev->client[1] == NULL) {
|
|
ret = -ENODEV;
|
|
dev_err(&client->dev, "I2C registration failed\n");
|
|
if (ret)
|
|
goto err_regmap_0_regmap_exit;
|
|
}
|
|
dev->regmap[1] = regmap_init_i2c(dev->client[1], ®map_config);
|
|
if (IS_ERR(dev->regmap[1])) {
|
|
ret = PTR_ERR(dev->regmap[1]);
|
|
goto err_client_1_i2c_unregister_device;
|
|
}
|
|
i2c_set_clientdata(dev->client[1], dev);
|
|
|
|
dev->client[2] = i2c_new_dummy(client->adapter, 0x1c);
|
|
if (dev->client[2] == NULL) {
|
|
ret = -ENODEV;
|
|
dev_err(&client->dev, "2nd I2C registration failed\n");
|
|
if (ret)
|
|
goto err_regmap_1_regmap_exit;
|
|
}
|
|
dev->regmap[2] = regmap_init_i2c(dev->client[2], ®map_config);
|
|
if (IS_ERR(dev->regmap[2])) {
|
|
ret = PTR_ERR(dev->regmap[2]);
|
|
goto err_client_2_i2c_unregister_device;
|
|
}
|
|
i2c_set_clientdata(dev->client[2], dev);
|
|
|
|
/* Check demod answers with correct chip id */
|
|
ret = regmap_read(dev->regmap[2], 0xff, &uitmp);
|
|
if (ret)
|
|
goto err_regmap_2_regmap_exit;
|
|
|
|
dev_dbg(&client->dev, "chip id=%02x\n", uitmp);
|
|
|
|
if (uitmp != 0x03) {
|
|
ret = -ENODEV;
|
|
goto err_regmap_2_regmap_exit;
|
|
}
|
|
|
|
/* Sleep because chip is active by default */
|
|
ret = regmap_write(dev->regmap[2], 0x05, 0x3e);
|
|
if (ret)
|
|
goto err_regmap_2_regmap_exit;
|
|
|
|
/* Create dvb frontend */
|
|
memcpy(&dev->frontend.ops, &mn88473_ops, sizeof(dev->frontend.ops));
|
|
dev->frontend.demodulator_priv = client;
|
|
*config->fe = &dev->frontend;
|
|
i2c_set_clientdata(client, dev);
|
|
|
|
dev_info(&client->dev, "Panasonic MN88473 successfully identified\n");
|
|
|
|
return 0;
|
|
err_regmap_2_regmap_exit:
|
|
regmap_exit(dev->regmap[2]);
|
|
err_client_2_i2c_unregister_device:
|
|
i2c_unregister_device(dev->client[2]);
|
|
err_regmap_1_regmap_exit:
|
|
regmap_exit(dev->regmap[1]);
|
|
err_client_1_i2c_unregister_device:
|
|
i2c_unregister_device(dev->client[1]);
|
|
err_regmap_0_regmap_exit:
|
|
regmap_exit(dev->regmap[0]);
|
|
err_kfree:
|
|
kfree(dev);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int mn88473_remove(struct i2c_client *client)
|
|
{
|
|
struct mn88473_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
regmap_exit(dev->regmap[2]);
|
|
i2c_unregister_device(dev->client[2]);
|
|
|
|
regmap_exit(dev->regmap[1]);
|
|
i2c_unregister_device(dev->client[1]);
|
|
|
|
regmap_exit(dev->regmap[0]);
|
|
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id mn88473_id_table[] = {
|
|
{"mn88473", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mn88473_id_table);
|
|
|
|
static struct i2c_driver mn88473_driver = {
|
|
.driver = {
|
|
.name = "mn88473",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = mn88473_probe,
|
|
.remove = mn88473_remove,
|
|
.id_table = mn88473_id_table,
|
|
};
|
|
|
|
module_i2c_driver(mn88473_driver);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("Panasonic MN88473 DVB-T/T2/C demodulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(MN88473_FIRMWARE);
|