linux/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
Nicolas Pitre 6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00

191 lines
5.0 KiB
C

/*
* arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
*
* Marvell Orion-VoIP GE Reference Design Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
/*****************************************************************************
* RD-88F5181L GE Info
****************************************************************************/
/*
* 16M NOR flash Device bus boot chip select
*/
#define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000
#define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M
/*****************************************************************************
* 16M NOR Flash on Device bus Boot chip select
****************************************************************************/
static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
.width = 1,
};
static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
.flags = IORESOURCE_MEM,
.start = RD88F5181L_GE_NOR_BOOT_BASE,
.end = RD88F5181L_GE_NOR_BOOT_BASE +
RD88F5181L_GE_NOR_BOOT_SIZE - 1,
};
static struct platform_device rd88f5181l_ge_nor_boot_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &rd88f5181l_ge_nor_boot_flash_data,
},
.num_resources = 1,
.resource = &rd88f5181l_ge_nor_boot_flash_resource,
};
/*****************************************************************************
* General Setup
****************************************************************************/
static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
{ 0, MPP_GPIO }, /* LED1 */
{ 1, MPP_GPIO }, /* LED5 */
{ 2, MPP_GPIO }, /* LED4 */
{ 3, MPP_GPIO }, /* LED3 */
{ 4, MPP_GPIO }, /* PCI_intA */
{ 5, MPP_GPIO }, /* RTC interrupt */
{ 6, MPP_PCI_CLK }, /* CPU PCI refclk */
{ 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
{ 8, MPP_GPIO }, /* 88e6131 interrupt */
{ 9, MPP_GPIO }, /* GE_RXERR */
{ 10, MPP_GPIO }, /* PCI_intB */
{ 11, MPP_GPIO }, /* LED2 */
{ 12, MPP_GIGE }, /* GE_TXD[4] */
{ 13, MPP_GIGE }, /* GE_TXD[5] */
{ 14, MPP_GIGE }, /* GE_TXD[6] */
{ 15, MPP_GIGE }, /* GE_TXD[7] */
{ 16, MPP_GIGE }, /* GE_RXD[4] */
{ 17, MPP_GIGE }, /* GE_RXD[5] */
{ 18, MPP_GIGE }, /* GE_RXD[6] */
{ 19, MPP_GIGE }, /* GE_RXD[7] */
{ -1 },
};
static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
.port_names[3] = "cpu",
.port_names[5] = "lan4",
.port_names[7] = "lan3",
};
static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f5181l_ge_switch_chip_data,
};
static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
I2C_BOARD_INFO("ds1338", 0x68),
};
static void __init rd88f5181l_ge_init(void)
{
/*
* Setup basic Orion functions. Need to be called early.
*/
orion5x_init();
orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
/*
* Configure peripherals.
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_ge_eth_data);
orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
gpio_to_irq(8));
orion5x_i2c_init();
orion5x_uart0_init();
orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
RD88F5181L_GE_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_ge_nor_boot_flash);
i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
}
static int __init
rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
/*
* Check for devices with hard-wired IRQs.
*/
irq = orion5x_pci_map_irq(dev, slot, pin);
if (irq != -1)
return irq;
/*
* Cardbus slot.
*/
if (pin == 1)
return gpio_to_irq(4);
else
return gpio_to_irq(10);
}
static struct hw_pci rd88f5181l_ge_pci __initdata = {
.nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
.map_irq = rd88f5181l_ge_pci_map_irq,
};
static int __init rd88f5181l_ge_pci_init(void)
{
if (machine_is_rd88f5181l_ge()) {
orion5x_pci_set_cardbus_mode();
pci_common_init(&rd88f5181l_ge_pci);
}
return 0;
}
subsys_initcall(rd88f5181l_ge_pci_init);
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.boot_params = 0x00000100,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
MACHINE_END