forked from Minki/linux
5da1bb96dc
The current definition of the PCIe IO and MEM resources for SH7786 doesn't match what the datasheet says. For example, for PCIe0 0xfe100000 is advertised by the datasheet as a PCI IO region, while 0xfd000000 is advertised as a PCI MEM region. The code currently inverts the two. The SH4A_PCIEPARL and SH4A_PCIEPTCTLR registers allow to define the base address and role of the different regions (including whether it's a MEM or IO region). However, practical experience on a SH7786 shows that if 0xfe100000 is used for LEL and 0xfd000000 for IO, a PCIe device using two MEM BARs cannot be accessed at all. Simply using 0xfe100000 for IO and 0xfd000000 for MEM makes the PCIe device accessible. It is very likely that this was never seen because there are two other PCI MEM region listed in the resources. However, for different reasons, none of the two other MEM regions are usable on the specific SH7786 platform the problem was encountered. Therefore, the last MEM region at 0xfe100000 was used to place the BARs, making the device non-functional. This commit therefore adjusts those PCI MEM and IO resources definitions so that they match what the datasheet says. They have only been tested with PCIe 0. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org> |
||
|---|---|---|
| .. | ||
| boards | ||
| boot | ||
| cchips | ||
| configs | ||
| drivers | ||
| include | ||
| kernel | ||
| lib | ||
| lib64 | ||
| math-emu | ||
| mm | ||
| oprofile | ||
| tools | ||
| Kconfig | ||
| Kconfig.cpu | ||
| Kconfig.debug | ||
| Makefile | ||