linux/drivers/gpu/drm/i915/intel_psr.c
Dhinakaran Pandiyan c90c275c6f drm/i915/psr: Update PSR2 resolution check for Cannonlake
In fact, apply the Cannonlake resolution check for all >= Gen-10 platforms
to be safe.

v3: Update GLK too. (Ville)
    Longer variable names.
    if-else in place of ternary operator.
v2: Use local variables for resolution limits and print them (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Elio Martinez Monroy <elio.martinez.monroy@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306203355.29292-1-dhinakaran.pandiyan@intel.com
2018-03-06 14:35:45 -08:00

1100 lines
34 KiB
C

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
/**
* DOC: Panel Self Refresh (PSR/SRD)
*
* Since Haswell Display controller supports Panel Self-Refresh on display
* panels witch have a remote frame buffer (RFB) implemented according to PSR
* spec in eDP1.3. PSR feature allows the display to go to lower standby states
* when system is idle but display is on as it eliminates display refresh
* request to DDR memory completely as long as the frame buffer for that
* display is unchanged.
*
* Panel Self Refresh must be supported by both Hardware (source) and
* Panel (sink).
*
* PSR saves power by caching the framebuffer in the panel RFB, which allows us
* to power down the link and memory controller. For DSI panels the same idea
* is called "manual mode".
*
* The implementation uses the hardware-based PSR support which automatically
* enters/exits self-refresh mode. The hardware takes care of sending the
* required DP aux message and could even retrain the link (that part isn't
* enabled yet though). The hardware also keeps track of any frontbuffer
* changes to know when to exit self-refresh mode again. Unfortunately that
* part doesn't work too well, hence why the i915 PSR support uses the
* software frontbuffer tracking to make sure it doesn't miss a screen
* update. For this integration intel_psr_invalidate() and intel_psr_flush()
* get called by the frontbuffer tracking code. Note that because of locking
* issues the self-refresh re-enable code is done from a work queue, which
* must be correctly synchronized/cancelled when shutting down the pipe."
*/
#include <drm/drmP.h>
#include "intel_drv.h"
#include "i915_drv.h"
static inline enum intel_display_power_domain
psr_aux_domain(struct intel_dp *intel_dp)
{
/* CNL HW requires corresponding AUX IOs to be powered up for PSR.
* However, for non-A AUX ports the corresponding non-EDP transcoders
* would have already enabled power well 2 and DC_OFF. This means we can
* acquire a wider POWER_DOMAIN_AUX_{B,C,D,F} reference instead of a
* specific AUX_IO reference without powering up any extra wells.
* Note that PSR is enabled only on Port A even though this function
* returns the correct domain for other ports too.
*/
return intel_dp->aux_ch == AUX_CH_A ? POWER_DOMAIN_AUX_IO_A :
intel_dp->aux_power_domain;
}
static void psr_aux_io_power_get(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
if (INTEL_GEN(dev_priv) < 10)
return;
intel_display_power_get(dev_priv, psr_aux_domain(intel_dp));
}
static void psr_aux_io_power_put(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
if (INTEL_GEN(dev_priv) < 10)
return;
intel_display_power_put(dev_priv, psr_aux_domain(intel_dp));
}
static bool intel_dp_get_y_cord_status(struct intel_dp *intel_dp)
{
uint8_t psr_caps = 0;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_CAPS, &psr_caps) != 1)
return false;
return psr_caps & DP_PSR2_SU_Y_COORDINATE_REQUIRED;
}
static bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp)
{
uint8_t dprx = 0;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_DPRX_FEATURE_ENUMERATION_LIST,
&dprx) != 1)
return false;
return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED;
}
static bool intel_dp_get_alpm_status(struct intel_dp *intel_dp)
{
uint8_t alpm_caps = 0;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_RECEIVER_ALPM_CAP,
&alpm_caps) != 1)
return false;
return alpm_caps & DP_ALPM_CAP;
}
void intel_psr_init_dpcd(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv =
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT, intel_dp->psr_dpcd,
sizeof(intel_dp->psr_dpcd));
if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
dev_priv->psr.sink_support = true;
DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
}
if (INTEL_GEN(dev_priv) >= 9 &&
(intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
uint8_t frame_sync_cap;
dev_priv->psr.sink_support = true;
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
&frame_sync_cap) != 1)
frame_sync_cap = 0;
dev_priv->psr.aux_frame_sync = frame_sync_cap & DP_AUX_FRAME_SYNC_CAP;
/* PSR2 needs frame sync as well */
dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
DRM_DEBUG_KMS("PSR2 %s on sink",
dev_priv->psr.psr2_support ? "supported" : "not supported");
if (dev_priv->psr.psr2_support) {
dev_priv->psr.y_cord_support =
intel_dp_get_y_cord_status(intel_dp);
dev_priv->psr.colorimetry_support =
intel_dp_get_colorimetry_status(intel_dp);
dev_priv->psr.alpm =
intel_dp_get_alpm_status(intel_dp);
}
}
}
static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = to_i915(dev);
uint32_t val;
val = I915_READ(VLV_PSRSTAT(pipe)) &
VLV_EDP_PSR_CURR_STATE_MASK;
return (val == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
(val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
}
static void vlv_psr_setup_vsc(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
uint32_t val;
/* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */
val = I915_READ(VLV_VSCSDP(crtc->pipe));
val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
I915_WRITE(VLV_VSCSDP(crtc->pipe), val);
}
static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
struct edp_vsc_psr psr_vsc;
if (dev_priv->psr.psr2_support) {
/* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
memset(&psr_vsc, 0, sizeof(psr_vsc));
psr_vsc.sdp_header.HB0 = 0;
psr_vsc.sdp_header.HB1 = 0x7;
if (dev_priv->psr.colorimetry_support &&
dev_priv->psr.y_cord_support) {
psr_vsc.sdp_header.HB2 = 0x5;
psr_vsc.sdp_header.HB3 = 0x13;
} else if (dev_priv->psr.y_cord_support) {
psr_vsc.sdp_header.HB2 = 0x4;
psr_vsc.sdp_header.HB3 = 0xe;
} else {
psr_vsc.sdp_header.HB2 = 0x3;
psr_vsc.sdp_header.HB3 = 0xc;
}
} else {
/* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
memset(&psr_vsc, 0, sizeof(psr_vsc));
psr_vsc.sdp_header.HB0 = 0;
psr_vsc.sdp_header.HB1 = 0x7;
psr_vsc.sdp_header.HB2 = 0x2;
psr_vsc.sdp_header.HB3 = 0x8;
}
intel_dig_port->write_infoframe(&intel_dig_port->base.base, crtc_state,
DP_SDP_VSC, &psr_vsc, sizeof(psr_vsc));
}
static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
{
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
}
static i915_reg_t psr_aux_ctl_reg(struct drm_i915_private *dev_priv,
enum port port)
{
if (INTEL_GEN(dev_priv) >= 9)
return DP_AUX_CH_CTL(port);
else
return EDP_PSR_AUX_CTL;
}
static i915_reg_t psr_aux_data_reg(struct drm_i915_private *dev_priv,
enum port port, int index)
{
if (INTEL_GEN(dev_priv) >= 9)
return DP_AUX_CH_DATA(port, index);
else
return EDP_PSR_AUX_DATA(index);
}
static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
uint32_t aux_clock_divider;
i915_reg_t aux_ctl_reg;
static const uint8_t aux_msg[] = {
[0] = DP_AUX_NATIVE_WRITE << 4,
[1] = DP_SET_POWER >> 8,
[2] = DP_SET_POWER & 0xff,
[3] = 1 - 1,
[4] = DP_SET_POWER_D0,
};
enum port port = dig_port->base.port;
u32 aux_ctl;
int i;
BUILD_BUG_ON(sizeof(aux_msg) > 20);
aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
/* Enable AUX frame sync at sink */
if (dev_priv->psr.aux_frame_sync)
drm_dp_dpcd_writeb(&intel_dp->aux,
DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
DP_AUX_FRAME_SYNC_ENABLE);
/* Enable ALPM at sink for psr2 */
if (dev_priv->psr.psr2_support && dev_priv->psr.alpm)
drm_dp_dpcd_writeb(&intel_dp->aux,
DP_RECEIVER_ALPM_CONFIG,
DP_ALPM_ENABLE);
if (dev_priv->psr.link_standby)
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
else
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE);
aux_ctl_reg = psr_aux_ctl_reg(dev_priv, port);
/* Setup AUX registers */
for (i = 0; i < sizeof(aux_msg); i += 4)
I915_WRITE(psr_aux_data_reg(dev_priv, port, i >> 2),
intel_dp_pack_aux(&aux_msg[i], sizeof(aux_msg) - i));
aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, 0, sizeof(aux_msg),
aux_clock_divider);
I915_WRITE(aux_ctl_reg, aux_ctl);
}
static void vlv_psr_enable_source(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
/* Transition from PSR_state 0 (disabled) to PSR_state 1 (inactive) */
I915_WRITE(VLV_PSRCTL(crtc->pipe),
VLV_EDP_PSR_MODE_SW_TIMER |
VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
VLV_EDP_PSR_ENABLE);
}
static void vlv_psr_activate(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_crtc *crtc = dig_port->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
/*
* Let's do the transition from PSR_state 1 (inactive) to
* PSR_state 2 (transition to active - static frame transmission).
* Then Hardware is responsible for the transition to
* PSR_state 3 (active - no Remote Frame Buffer (RFB) update).
*/
I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
VLV_EDP_PSR_ACTIVE_ENTRY);
}
static void hsw_activate_psr1(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
uint32_t max_sleep_time = 0x1f;
/*
* Let's respect VBT in case VBT asks a higher idle_frame value.
* Let's use 6 as the minimum to cover all known cases including
* the off-by-one issue that HW has in some cases. Also there are
* cases where sink should be able to train
* with the 5 or 6 idle patterns.
*/
uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
uint32_t val = EDP_PSR_ENABLE;
val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT;
val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
if (IS_HASWELL(dev_priv))
val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
if (dev_priv->psr.link_standby)
val |= EDP_PSR_LINK_STANDBY;
if (dev_priv->vbt.psr.tp1_wakeup_time > 5)
val |= EDP_PSR_TP1_TIME_2500us;
else if (dev_priv->vbt.psr.tp1_wakeup_time > 1)
val |= EDP_PSR_TP1_TIME_500us;
else if (dev_priv->vbt.psr.tp1_wakeup_time > 0)
val |= EDP_PSR_TP1_TIME_100us;
else
val |= EDP_PSR_TP1_TIME_0us;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR_TP2_TP3_TIME_2500us;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1)
val |= EDP_PSR_TP2_TP3_TIME_500us;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0)
val |= EDP_PSR_TP2_TP3_TIME_100us;
else
val |= EDP_PSR_TP2_TP3_TIME_0us;
if (intel_dp_source_supports_hbr2(intel_dp) &&
drm_dp_tps3_supported(intel_dp->dpcd))
val |= EDP_PSR_TP1_TP3_SEL;
else
val |= EDP_PSR_TP1_TP2_SEL;
val |= I915_READ(EDP_PSR_CTL) & EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK;
I915_WRITE(EDP_PSR_CTL, val);
}
static void hsw_activate_psr2(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
/*
* Let's respect VBT in case VBT asks a higher idle_frame value.
* Let's use 6 as the minimum to cover all known cases including
* the off-by-one issue that HW has in some cases. Also there are
* cases where sink should be able to train
* with the 5 or 6 idle patterns.
*/
uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
uint32_t val;
uint8_t sink_latency;
val = idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
/* FIXME: selective update is probably totally broken because it doesn't
* mesh at all with our frontbuffer tracking. And the hw alone isn't
* good enough. */
val |= EDP_PSR2_ENABLE |
EDP_SU_TRACK_ENABLE;
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_SYNCHRONIZATION_LATENCY_IN_SINK,
&sink_latency) == 1) {
sink_latency &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
} else {
sink_latency = 0;
}
val |= EDP_PSR2_FRAME_BEFORE_SU(sink_latency + 1);
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR2_TP2_TIME_2500;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1)
val |= EDP_PSR2_TP2_TIME_500;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0)
val |= EDP_PSR2_TP2_TIME_100;
else
val |= EDP_PSR2_TP2_TIME_50;
I915_WRITE(EDP_PSR2_CTL, val);
}
static void hsw_psr_activate(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
/* On HSW+ after we enable PSR on source it will activate it
* as soon as it match configure idle_frame count. So
* we just actually enable it here on activation time.
*/
/* psr1 and psr2 are mutually exclusive.*/
if (dev_priv->psr.psr2_support)
hsw_activate_psr2(intel_dp);
else
hsw_activate_psr1(intel_dp);
}
static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
int crtc_hdisplay = crtc_state->base.adjusted_mode.crtc_hdisplay;
int crtc_vdisplay = crtc_state->base.adjusted_mode.crtc_vdisplay;
int psr_max_h = 0, psr_max_v = 0;
/*
* FIXME psr2_support is messed up. It's both computed
* dynamically during PSR enable, and extracted from sink
* caps during eDP detection.
*/
if (!dev_priv->psr.psr2_support)
return false;
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
psr_max_h = 4096;
psr_max_v = 2304;
} else if (IS_GEN9(dev_priv)) {
psr_max_h = 3640;
psr_max_v = 2304;
}
if (crtc_hdisplay > psr_max_h || crtc_vdisplay > psr_max_v) {
DRM_DEBUG_KMS("PSR2 not enabled, resolution %dx%d > max supported %dx%d\n",
crtc_hdisplay, crtc_vdisplay,
psr_max_h, psr_max_v);
return false;
}
/*
* FIXME:enable psr2 only for y-cordinate psr2 panels
* After gtc implementation , remove this restriction.
*/
if (!dev_priv->psr.y_cord_support) {
DRM_DEBUG_KMS("PSR2 not enabled, panel does not support Y coordinate\n");
return false;
}
return true;
}
void intel_psr_compute_config(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
const struct drm_display_mode *adjusted_mode =
&crtc_state->base.adjusted_mode;
int psr_setup_time;
if (!CAN_PSR(dev_priv))
return;
if (!i915_modparams.enable_psr) {
DRM_DEBUG_KMS("PSR disable by flag\n");
return;
}
/*
* HSW spec explicitly says PSR is tied to port A.
* BDW+ platforms with DDI implementation of PSR have different
* PSR registers per transcoder and we only implement transcoder EDP
* ones. Since by Display design transcoder EDP is tied to port A
* we can safely escape based on the port A.
*/
if (HAS_DDI(dev_priv) && dig_port->base.port != PORT_A) {
DRM_DEBUG_KMS("PSR condition failed: Port not supported\n");
return;
}
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
!dev_priv->psr.link_standby) {
DRM_ERROR("PSR condition failed: Link off requested but not supported on this platform\n");
return;
}
if (IS_HASWELL(dev_priv) &&
I915_READ(HSW_STEREO_3D_CTL(crtc_state->cpu_transcoder)) &
S3D_ENABLE) {
DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
return;
}
if (IS_HASWELL(dev_priv) &&
adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
return;
}
psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
if (psr_setup_time < 0) {
DRM_DEBUG_KMS("PSR condition failed: Invalid PSR setup time (0x%02x)\n",
intel_dp->psr_dpcd[1]);
return;
}
if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
DRM_DEBUG_KMS("PSR condition failed: PSR setup time (%d us) too long\n",
psr_setup_time);
return;
}
if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) {
DRM_DEBUG_KMS("PSR condition failed: panel lacks power state control\n");
return;
}
crtc_state->has_psr = true;
crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state);
DRM_DEBUG_KMS("Enabling PSR%s\n", crtc_state->has_psr2 ? "2" : "");
}
static void intel_psr_activate(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
if (dev_priv->psr.psr2_support)
WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
else
WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
WARN_ON(dev_priv->psr.active);
lockdep_assert_held(&dev_priv->psr.lock);
dev_priv->psr.activate(intel_dp);
dev_priv->psr.active = true;
}
static void hsw_psr_enable_source(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
u32 chicken;
psr_aux_io_power_get(intel_dp);
if (dev_priv->psr.psr2_support) {
chicken = PSR2_VSC_ENABLE_PROG_HEADER;
if (dev_priv->psr.y_cord_support)
chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
I915_WRITE(EDP_PSR_DEBUG,
EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD |
EDP_PSR_DEBUG_MASK_LPSP |
EDP_PSR_DEBUG_MASK_MAX_SLEEP |
EDP_PSR_DEBUG_MASK_DISP_REG_WRITE);
} else {
/*
* Per Spec: Avoid continuous PSR exit by masking MEMUP
* and HPD. also mask LPSP to avoid dependency on other
* drivers that might block runtime_pm besides
* preventing other hw tracking issues now we can rely
* on frontbuffer tracking.
*/
I915_WRITE(EDP_PSR_DEBUG,
EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD |
EDP_PSR_DEBUG_MASK_LPSP);
}
}
/**
* intel_psr_enable - Enable PSR
* @intel_dp: Intel DP
* @crtc_state: new CRTC state
*
* This function can only be called after the pipe is fully trained and enabled.
*/
void intel_psr_enable(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
if (!crtc_state->has_psr)
return;
if (WARN_ON(!CAN_PSR(dev_priv)))
return;
WARN_ON(dev_priv->drrs.dp);
mutex_lock(&dev_priv->psr.lock);
if (dev_priv->psr.enabled) {
DRM_DEBUG_KMS("PSR already in use\n");
goto unlock;
}
dev_priv->psr.psr2_support = crtc_state->has_psr2;
dev_priv->psr.busy_frontbuffer_bits = 0;
dev_priv->psr.setup_vsc(intel_dp, crtc_state);
dev_priv->psr.enable_sink(intel_dp);
dev_priv->psr.enable_source(intel_dp, crtc_state);
dev_priv->psr.enabled = intel_dp;
if (INTEL_GEN(dev_priv) >= 9) {
intel_psr_activate(intel_dp);
} else {
/*
* FIXME: Activation should happen immediately since this
* function is just called after pipe is fully trained and
* enabled.
* However on some platforms we face issues when first
* activation follows a modeset so quickly.
* - On VLV/CHV we get bank screen on first activation
* - On HSW/BDW we get a recoverable frozen screen until
* next exit-activate sequence.
*/
schedule_delayed_work(&dev_priv->psr.work,
msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5));
}
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
static void vlv_psr_disable(struct intel_dp *intel_dp,
const struct intel_crtc_state *old_crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
uint32_t val;
if (dev_priv->psr.active) {
/* Put VLV PSR back to PSR_state 0 (disabled). */
if (intel_wait_for_register(dev_priv,
VLV_PSRSTAT(crtc->pipe),
VLV_EDP_PSR_IN_TRANS,
0,
1))
WARN(1, "PSR transition took longer than expected\n");
val = I915_READ(VLV_PSRCTL(crtc->pipe));
val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
val &= ~VLV_EDP_PSR_ENABLE;
val &= ~VLV_EDP_PSR_MODE_MASK;
I915_WRITE(VLV_PSRCTL(crtc->pipe), val);
dev_priv->psr.active = false;
} else {
WARN_ON(vlv_is_psr_active_on_pipe(dev, crtc->pipe));
}
}
static void hsw_psr_disable(struct intel_dp *intel_dp,
const struct intel_crtc_state *old_crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
if (dev_priv->psr.active) {
i915_reg_t psr_status;
u32 psr_status_mask;
if (dev_priv->psr.aux_frame_sync)
drm_dp_dpcd_writeb(&intel_dp->aux,
DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
0);
if (dev_priv->psr.psr2_support) {
psr_status = EDP_PSR2_STATUS;
psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
I915_WRITE(EDP_PSR2_CTL,
I915_READ(EDP_PSR2_CTL) &
~(EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE));
} else {
psr_status = EDP_PSR_STATUS;
psr_status_mask = EDP_PSR_STATUS_STATE_MASK;
I915_WRITE(EDP_PSR_CTL,
I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
}
/* Wait till PSR is idle */
if (intel_wait_for_register(dev_priv,
psr_status, psr_status_mask, 0,
2000))
DRM_ERROR("Timed out waiting for PSR Idle State\n");
dev_priv->psr.active = false;
} else {
if (dev_priv->psr.psr2_support)
WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
else
WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
}
psr_aux_io_power_put(intel_dp);
}
/**
* intel_psr_disable - Disable PSR
* @intel_dp: Intel DP
* @old_crtc_state: old CRTC state
*
* This function needs to be called before disabling pipe.
*/
void intel_psr_disable(struct intel_dp *intel_dp,
const struct intel_crtc_state *old_crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
if (!old_crtc_state->has_psr)
return;
if (WARN_ON(!CAN_PSR(dev_priv)))
return;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
dev_priv->psr.disable_source(intel_dp, old_crtc_state);
/* Disable PSR on Sink */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0);
dev_priv->psr.enabled = NULL;
mutex_unlock(&dev_priv->psr.lock);
cancel_delayed_work_sync(&dev_priv->psr.work);
}
static void intel_psr_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), psr.work.work);
struct intel_dp *intel_dp = dev_priv->psr.enabled;
struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
/* We have to make sure PSR is ready for re-enable
* otherwise it keeps disabled until next full enable/disable cycle.
* PSR might take some time to get fully disabled
* and be ready for re-enable.
*/
if (HAS_DDI(dev_priv)) {
if (dev_priv->psr.psr2_support) {
if (intel_wait_for_register(dev_priv,
EDP_PSR2_STATUS,
EDP_PSR2_STATUS_STATE_MASK,
0,
50)) {
DRM_ERROR("Timed out waiting for PSR2 Idle for re-enable\n");
return;
}
} else {
if (intel_wait_for_register(dev_priv,
EDP_PSR_STATUS,
EDP_PSR_STATUS_STATE_MASK,
0,
50)) {
DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
return;
}
}
} else {
if (intel_wait_for_register(dev_priv,
VLV_PSRSTAT(pipe),
VLV_EDP_PSR_IN_TRANS,
0,
1)) {
DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
return;
}
}
mutex_lock(&dev_priv->psr.lock);
intel_dp = dev_priv->psr.enabled;
if (!intel_dp)
goto unlock;
/*
* The delayed work can race with an invalidate hence we need to
* recheck. Since psr_flush first clears this and then reschedules we
* won't ever miss a flush when bailing out here.
*/
if (dev_priv->psr.busy_frontbuffer_bits)
goto unlock;
intel_psr_activate(intel_dp);
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
static void intel_psr_exit(struct drm_i915_private *dev_priv)
{
struct intel_dp *intel_dp = dev_priv->psr.enabled;
struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
u32 val;
if (!dev_priv->psr.active)
return;
if (HAS_DDI(dev_priv)) {
if (dev_priv->psr.aux_frame_sync)
drm_dp_dpcd_writeb(&intel_dp->aux,
DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
0);
if (dev_priv->psr.psr2_support) {
val = I915_READ(EDP_PSR2_CTL);
WARN_ON(!(val & EDP_PSR2_ENABLE));
I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
} else {
val = I915_READ(EDP_PSR_CTL);
WARN_ON(!(val & EDP_PSR_ENABLE));
I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
}
} else {
val = I915_READ(VLV_PSRCTL(pipe));
/*
* Here we do the transition drirectly from
* PSR_state 3 (active - no Remote Frame Buffer (RFB) update) to
* PSR_state 5 (exit).
* PSR State 4 (active with single frame update) can be skipped.
* On PSR_state 5 (exit) Hardware is responsible to transition
* back to PSR_state 1 (inactive).
* Now we are at Same state after vlv_psr_enable_source.
*/
val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
I915_WRITE(VLV_PSRCTL(pipe), val);
/*
* Send AUX wake up - Spec says after transitioning to PSR
* active we have to send AUX wake up by writing 01h in DPCD
* 600h of sink device.
* XXX: This might slow down the transition, but without this
* HW doesn't complete the transition to PSR_state 1 and we
* never get the screen updated.
*/
drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
DP_SET_POWER_D0);
}
dev_priv->psr.active = false;
}
/**
* intel_psr_single_frame_update - Single Frame Update
* @dev_priv: i915 device
* @frontbuffer_bits: frontbuffer plane tracking bits
*
* Some platforms support a single frame update feature that is used to
* send and update only one frame on Remote Frame Buffer.
* So far it is only implemented for Valleyview and Cherryview because
* hardware requires this to be done before a page flip.
*/
void intel_psr_single_frame_update(struct drm_i915_private *dev_priv,
unsigned frontbuffer_bits)
{
struct drm_crtc *crtc;
enum pipe pipe;
u32 val;
if (!CAN_PSR(dev_priv))
return;
/*
* Single frame update is already supported on BDW+ but it requires
* many W/A and it isn't really needed.
*/
if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
return;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
if (frontbuffer_bits & INTEL_FRONTBUFFER_ALL_MASK(pipe)) {
val = I915_READ(VLV_PSRCTL(pipe));
/*
* We need to set this bit before writing registers for a flip.
* This bit will be self-clear when it gets to the PSR active state.
*/
I915_WRITE(VLV_PSRCTL(pipe), val | VLV_EDP_PSR_SINGLE_FRAME_UPDATE);
}
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_invalidate - Invalidade PSR
* @dev_priv: i915 device
* @frontbuffer_bits: frontbuffer plane tracking bits
*
* Since the hardware frontbuffer tracking has gaps we need to integrate
* with the software frontbuffer tracking. This function gets called every
* time frontbuffer rendering starts and a buffer gets dirtied. PSR must be
* disabled if the frontbuffer mask contains a buffer relevant to PSR.
*
* Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits."
*/
void intel_psr_invalidate(struct drm_i915_private *dev_priv,
unsigned frontbuffer_bits)
{
struct drm_crtc *crtc;
enum pipe pipe;
if (!CAN_PSR(dev_priv))
return;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
dev_priv->psr.busy_frontbuffer_bits |= frontbuffer_bits;
if (frontbuffer_bits)
intel_psr_exit(dev_priv);
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_flush - Flush PSR
* @dev_priv: i915 device
* @frontbuffer_bits: frontbuffer plane tracking bits
* @origin: which operation caused the flush
*
* Since the hardware frontbuffer tracking has gaps we need to integrate
* with the software frontbuffer tracking. This function gets called every
* time frontbuffer rendering has completed and flushed out to memory. PSR
* can be enabled again if no other frontbuffer relevant to PSR is dirty.
*
* Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits.
*/
void intel_psr_flush(struct drm_i915_private *dev_priv,
unsigned frontbuffer_bits, enum fb_op_origin origin)
{
struct drm_crtc *crtc;
enum pipe pipe;
if (!CAN_PSR(dev_priv))
return;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
dev_priv->psr.busy_frontbuffer_bits &= ~frontbuffer_bits;
/* By definition flush = invalidate + flush */
if (frontbuffer_bits)
intel_psr_exit(dev_priv);
if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
if (!work_busy(&dev_priv->psr.work.work))
schedule_delayed_work(&dev_priv->psr.work,
msecs_to_jiffies(100));
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_init - Init basic PSR work and mutex.
* @dev_priv: i915 device private
*
* This function is called only once at driver load to initialize basic
* PSR stuff.
*/
void intel_psr_init(struct drm_i915_private *dev_priv)
{
if (!HAS_PSR(dev_priv))
return;
dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
if (!dev_priv->psr.sink_support)
return;
/* Per platform default: all disabled. */
if (i915_modparams.enable_psr == -1)
i915_modparams.enable_psr = 0;
/* Set link_standby x link_off defaults */
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
/* HSW and BDW require workarounds that we don't implement. */
dev_priv->psr.link_standby = false;
else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
/* On VLV and CHV only standby mode is supported. */
dev_priv->psr.link_standby = true;
else
/* For new platforms let's respect VBT back again */
dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link;
/* Override link_standby x link_off defaults */
if (i915_modparams.enable_psr == 2 && !dev_priv->psr.link_standby) {
DRM_DEBUG_KMS("PSR: Forcing link standby\n");
dev_priv->psr.link_standby = true;
}
if (i915_modparams.enable_psr == 3 && dev_priv->psr.link_standby) {
DRM_DEBUG_KMS("PSR: Forcing main link off\n");
dev_priv->psr.link_standby = false;
}
INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
mutex_init(&dev_priv->psr.lock);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
dev_priv->psr.enable_source = vlv_psr_enable_source;
dev_priv->psr.disable_source = vlv_psr_disable;
dev_priv->psr.enable_sink = vlv_psr_enable_sink;
dev_priv->psr.activate = vlv_psr_activate;
dev_priv->psr.setup_vsc = vlv_psr_setup_vsc;
} else {
dev_priv->psr.enable_source = hsw_psr_enable_source;
dev_priv->psr.disable_source = hsw_psr_disable;
dev_priv->psr.enable_sink = hsw_psr_enable_sink;
dev_priv->psr.activate = hsw_psr_activate;
dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;
}
}