forked from Minki/linux
411ac2982c
Mark of the Unicorn designed Track 16 2011 as one of models in third
generation of its FireWire series. The model is already discontinued.
It consists of below ICs:
* Texas Instruments TSB41AB1
* Microchip (SMSC) USB3300
* Xilinx Spartan-3A FPGA, XC3S700A
* Texas Instruments TMS320C6722
* Microchip (Atmel) AT91SAM SAM7S512
It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in optical interfaces. The model supports
transmission of PCM frames as well as MIDI messages.
The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.
This commit adds support for it.
$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04107d95 bus_info_length 4, crc_length 16, crc 32149
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 000a83c4 device_id 00000a83c4 | EUI-64 0001f200000a83c4
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 00035b04 directory_length 3, crc 23300
42c 120001f2 specifier id
430 13000039 version
434 17102800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002b25f leaf_length 2, crc 45663
43c 0001f200 company_id 0001f2 |
440 000a83c4 device_id 00000a83c4 | EUI-64 0001f200000a83c4
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211107110644.23511-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
201 lines
6.0 KiB
Plaintext
201 lines
6.0 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menuconfig SND_FIREWIRE
|
|
bool "FireWire sound devices"
|
|
depends on FIREWIRE
|
|
default y
|
|
help
|
|
Support for IEEE-1394/FireWire/iLink sound devices.
|
|
|
|
if SND_FIREWIRE && FIREWIRE
|
|
|
|
config SND_FIREWIRE_LIB
|
|
tristate
|
|
select SND_PCM
|
|
select SND_RAWMIDI
|
|
|
|
config SND_DICE
|
|
tristate "DICE-based DACs support"
|
|
select SND_HWDEP
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for devices based on the DICE chip family
|
|
(DICE-II/TCD2210(Mini)/TCD2220(Jr.)) which TC Applied Technologies (TCAT) produced.
|
|
* Allen and Heath Zed R16
|
|
* Alesis iO 14/26 FireWire, MasterControl, MultiMix 8/12/16 FireWire
|
|
* Avid Mbox 3 Pro
|
|
* FlexRadio Systems FLEX-3000, FLEX-5000
|
|
* Focusrite Liquid Saffire 56
|
|
* Focusrite Saffire Pro 14, Pro 24, Pro 24 DSP, Pro 26, Pro 40(TCD2220)
|
|
* Harman Music Group Lexicon I-ONIX FW810S
|
|
* Loud Technologies Mackie Onyx Blackbird, Onyx 820i/1220i/1620i/1640i (latter models)
|
|
* M-Audio ProFire 610/2626
|
|
* Mytek Stereo192-DSD DAC
|
|
* Midas Klark Teknik VeniceF series
|
|
* PreSonus FireStudio, FireStudio Mobile, FireStudio Project, FireStudio Tube
|
|
* PreSonus StudioLive 16.4.2, 16.0.2, 24.4.2, 32.4.2
|
|
* Solid State Logic Duende Classic, Duende Mini
|
|
* TC Electronic Studio Konnekt 48, Konnekt 24D, Konnekt Live, Impact Twin
|
|
* TC Electronic Digital Konnekt x32, Desktop Konnekt 6
|
|
* Weiss Engineering ADC2, Vesta, Minerva, AFI1, DAC1, INT202, DAC202
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-dice.
|
|
|
|
config SND_OXFW
|
|
tristate "Oxford Semiconductor FW970/971 chipset support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based on
|
|
Oxford Semiconductor FW970/971 chipset.
|
|
* Griffin Firewave
|
|
* LaCie Firewire Speakers
|
|
* Behringer F-Control Audio 202
|
|
* Mackie(Loud) Onyx-i series (former models)
|
|
* Mackie(Loud) Onyx 1640i (former model)
|
|
* Mackie(Loud) Onyx Satellite
|
|
* Mackie(Loud) Tapco Link.Firewire
|
|
* Mackie(Loud) d.2 pro/d.4 pro (built-in FireWire card with OXFW971 ASIC)
|
|
* Mackie(Loud) U.420/U.420d
|
|
* TASCAM FireOne
|
|
* Stanton Controllers & Systems 1 Deck/Mixer
|
|
* APOGEE duet FireWire
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-oxfw.
|
|
|
|
config SND_ISIGHT
|
|
tristate "Apple iSight microphone"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the front and rear microphones
|
|
of the Apple iSight web camera.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-isight.
|
|
|
|
config SND_FIREWORKS
|
|
tristate "Echo Fireworks board module support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on Echo Digital Audio Fireworks board:
|
|
* Mackie Onyx 400F/1200F
|
|
* Echo AudioFire12/8(until 2009 July)
|
|
* Echo AudioFire2/4/Pre8/8(since 2009 July)
|
|
* Echo Fireworks 8/HDMI
|
|
* Gibson Robot Interface Pack/GoldTop
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fireworks.
|
|
|
|
config SND_BEBOB
|
|
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
|
|
* Edirol FA-66/FA-101
|
|
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
|
|
* BridgeCo RDAudio1/Audio5
|
|
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
|
|
* Mackie d.2 (optional FireWire card with DM1000 ASIC)
|
|
* Stanton FinalScratch 2 (ScratchAmp)
|
|
* Tascam IF-FW/DM
|
|
* Behringer XENIX UFX 1204/1604
|
|
* Behringer Digital Mixer X32 series (X-UF Card)
|
|
* Behringer FCA610/1616
|
|
* Apogee Rosetta 200/400 (X-FireWire card)
|
|
* Apogee DA/AD/DD-16X (X-FireWire card)
|
|
* Apogee Ensemble
|
|
* ESI QuataFire 610
|
|
* AcousticReality eARMasterOne
|
|
* CME MatrixKFW
|
|
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
|
|
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
|
|
* Lynx Aurora 8/16 (LT-FW)
|
|
* ICON FireXon
|
|
* PrismSound Orpheus/ADA-8XR
|
|
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
|
|
* TerraTec EWS MIC2/EWS MIC8
|
|
* TerraTec Aureon 7.1 FireWire
|
|
* Yamaha GO44/GO46
|
|
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
|
|
* M-Audio FireWire410/AudioPhile/Solo
|
|
* M-Audio Ozonic/NRV10/ProfireLightBridge
|
|
* M-Audio FireWire 1814/ProjectMix IO
|
|
* Digidesign Mbox 2 Pro
|
|
* ToneWeal FW66
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bebob.
|
|
|
|
config SND_FIREWIRE_DIGI00X
|
|
tristate "Digidesign Digi 002/003 family support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for Digidesign Digi 002/003 family.
|
|
* Digi 002 Console
|
|
* Digi 002 Rack
|
|
* Digi 003 Console
|
|
* Digi 003 Rack
|
|
* Digi 003 Rack+
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-digi00x.
|
|
|
|
config SND_FIREWIRE_TASCAM
|
|
tristate "TASCAM FireWire series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for TASCAM.
|
|
* FW-1884
|
|
* FW-1082
|
|
* FW-1804
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-tascam.
|
|
|
|
config SND_FIREWIRE_MOTU
|
|
tristate "Mark of the unicorn FireWire series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to enable support for FireWire devices which MOTU produced:
|
|
* 828
|
|
* 896
|
|
* 828mk2
|
|
* 896hd
|
|
* Traveler
|
|
* Ultralite
|
|
* 8pre
|
|
* 828mk3 (FireWire only)
|
|
* 828mk3 (Hybrid)
|
|
* Ultralite mk3 (FireWire only)
|
|
* Ultralite mk3 (Hybrid)
|
|
* Traveler mk3
|
|
* Audio Express
|
|
* Track 16
|
|
* 4pre
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-motu.
|
|
|
|
config SND_FIREFACE
|
|
tristate "RME Fireface series support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for RME fireface series.
|
|
* Fireface 400
|
|
* Fireface 800
|
|
* Fireface UFX
|
|
* Fireface UCX
|
|
* Fireface 802
|
|
|
|
endif # SND_FIREWIRE
|