5a2a7d57ee
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
518 lines
12 KiB
Plaintext
518 lines
12 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
#include "imx51-pinfunc.h"
|
|
|
|
/ {
|
|
aliases {
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
spi0 = &ecspi1;
|
|
spi1 = &ecspi2;
|
|
spi2 = &cspi;
|
|
};
|
|
|
|
tzic: tz-interrupt-controller@e0000000 {
|
|
compatible = "fsl,imx51-tzic", "fsl,tzic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0xe0000000 0x4000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ckil {
|
|
compatible = "fsl,imx-ckil", "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
ckih1 {
|
|
compatible = "fsl,imx-ckih1", "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
ckih2 {
|
|
compatible = "fsl,imx-ckih2", "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
osc {
|
|
compatible = "fsl,imx-osc", "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a8";
|
|
reg = <0>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clks 24>;
|
|
clock-names = "cpu";
|
|
operating-points = <
|
|
/* kHz uV (No regulator support) */
|
|
160000 0
|
|
800000 0
|
|
>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&tzic>;
|
|
ranges;
|
|
|
|
iram: iram@1ffe0000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x1ffe0000 0x20000>;
|
|
};
|
|
|
|
ipu: ipu@40000000 {
|
|
#crtc-cells = <1>;
|
|
compatible = "fsl,imx51-ipu";
|
|
reg = <0x40000000 0x20000000>;
|
|
interrupts = <11 10>;
|
|
clocks = <&clks 59>, <&clks 110>, <&clks 61>;
|
|
clock-names = "bus", "di0", "di1";
|
|
resets = <&src 2>;
|
|
};
|
|
|
|
aips@70000000 { /* AIPS1 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x70000000 0x10000000>;
|
|
ranges;
|
|
|
|
spba@70000000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x70000000 0x40000>;
|
|
ranges;
|
|
|
|
esdhc1: esdhc@70004000 {
|
|
compatible = "fsl,imx51-esdhc";
|
|
reg = <0x70004000 0x4000>;
|
|
interrupts = <1>;
|
|
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc2: esdhc@70008000 {
|
|
compatible = "fsl,imx51-esdhc";
|
|
reg = <0x70008000 0x4000>;
|
|
interrupts = <2>;
|
|
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@7000c000 {
|
|
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
|
|
reg = <0x7000c000 0x4000>;
|
|
interrupts = <33>;
|
|
clocks = <&clks 32>, <&clks 33>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi1: ecspi@70010000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx51-ecspi";
|
|
reg = <0x70010000 0x4000>;
|
|
interrupts = <36>;
|
|
clocks = <&clks 51>, <&clks 52>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi2: ssi@70014000 {
|
|
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
|
|
reg = <0x70014000 0x4000>;
|
|
interrupts = <30>;
|
|
clocks = <&clks 49>;
|
|
dmas = <&sdma 24 1 0>,
|
|
<&sdma 25 1 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <15>;
|
|
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc3: esdhc@70020000 {
|
|
compatible = "fsl,imx51-esdhc";
|
|
reg = <0x70020000 0x4000>;
|
|
interrupts = <3>;
|
|
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc4: esdhc@70024000 {
|
|
compatible = "fsl,imx51-esdhc";
|
|
reg = <0x70024000 0x4000>;
|
|
interrupts = <4>;
|
|
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usbphy0: usbphy@0 {
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&clks 75>;
|
|
clock-names = "main_clk";
|
|
status = "okay";
|
|
};
|
|
|
|
usbotg: usb@73f80000 {
|
|
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
|
|
reg = <0x73f80000 0x0200>;
|
|
interrupts = <18>;
|
|
clocks = <&clks 108>;
|
|
fsl,usbmisc = <&usbmisc 0>;
|
|
fsl,usbphy = <&usbphy0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh1: usb@73f80200 {
|
|
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
|
|
reg = <0x73f80200 0x0200>;
|
|
interrupts = <14>;
|
|
clocks = <&clks 108>;
|
|
fsl,usbmisc = <&usbmisc 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh2: usb@73f80400 {
|
|
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
|
|
reg = <0x73f80400 0x0200>;
|
|
interrupts = <16>;
|
|
clocks = <&clks 108>;
|
|
fsl,usbmisc = <&usbmisc 2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh3: usb@73f80600 {
|
|
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
|
|
reg = <0x73f80600 0x0200>;
|
|
interrupts = <17>;
|
|
clocks = <&clks 108>;
|
|
fsl,usbmisc = <&usbmisc 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc: usbmisc@73f80800 {
|
|
#index-cells = <1>;
|
|
compatible = "fsl,imx51-usbmisc";
|
|
reg = <0x73f80800 0x200>;
|
|
clocks = <&clks 108>;
|
|
};
|
|
|
|
gpio1: gpio@73f84000 {
|
|
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
|
|
reg = <0x73f84000 0x4000>;
|
|
interrupts = <50 51>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@73f88000 {
|
|
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
|
|
reg = <0x73f88000 0x4000>;
|
|
interrupts = <52 53>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@73f8c000 {
|
|
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
|
|
reg = <0x73f8c000 0x4000>;
|
|
interrupts = <54 55>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@73f90000 {
|
|
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
|
|
reg = <0x73f90000 0x4000>;
|
|
interrupts = <56 57>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
kpp: kpp@73f94000 {
|
|
compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
|
|
reg = <0x73f94000 0x4000>;
|
|
interrupts = <60>;
|
|
clocks = <&clks 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog1: wdog@73f98000 {
|
|
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
|
|
reg = <0x73f98000 0x4000>;
|
|
interrupts = <58>;
|
|
clocks = <&clks 0>;
|
|
};
|
|
|
|
wdog2: wdog@73f9c000 {
|
|
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
|
|
reg = <0x73f9c000 0x4000>;
|
|
interrupts = <59>;
|
|
clocks = <&clks 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt: timer@73fa0000 {
|
|
compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
|
|
reg = <0x73fa0000 0x4000>;
|
|
interrupts = <39>;
|
|
clocks = <&clks 36>, <&clks 41>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
iomuxc: iomuxc@73fa8000 {
|
|
compatible = "fsl,imx51-iomuxc";
|
|
reg = <0x73fa8000 0x4000>;
|
|
};
|
|
|
|
pwm1: pwm@73fb4000 {
|
|
#pwm-cells = <2>;
|
|
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
|
|
reg = <0x73fb4000 0x4000>;
|
|
clocks = <&clks 37>, <&clks 38>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <61>;
|
|
};
|
|
|
|
pwm2: pwm@73fb8000 {
|
|
#pwm-cells = <2>;
|
|
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
|
|
reg = <0x73fb8000 0x4000>;
|
|
clocks = <&clks 39>, <&clks 40>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <94>;
|
|
};
|
|
|
|
uart1: serial@73fbc000 {
|
|
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
|
|
reg = <0x73fbc000 0x4000>;
|
|
interrupts = <31>;
|
|
clocks = <&clks 28>, <&clks 29>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@73fc0000 {
|
|
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
|
|
reg = <0x73fc0000 0x4000>;
|
|
interrupts = <32>;
|
|
clocks = <&clks 30>, <&clks 31>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
src: src@73fd0000 {
|
|
compatible = "fsl,imx51-src";
|
|
reg = <0x73fd0000 0x4000>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
clks: ccm@73fd4000{
|
|
compatible = "fsl,imx51-ccm";
|
|
reg = <0x73fd4000 0x4000>;
|
|
interrupts = <0 71 0x04 0 72 0x04>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
aips@80000000 { /* AIPS2 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x80000000 0x10000000>;
|
|
ranges;
|
|
|
|
iim: iim@83f98000 {
|
|
compatible = "fsl,imx51-iim", "fsl,imx27-iim";
|
|
reg = <0x83f98000 0x4000>;
|
|
interrupts = <69>;
|
|
clocks = <&clks 107>;
|
|
};
|
|
|
|
owire: owire@83fa4000 {
|
|
compatible = "fsl,imx51-owire", "fsl,imx21-owire";
|
|
reg = <0x83fa4000 0x4000>;
|
|
interrupts = <88>;
|
|
clocks = <&clks 159>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi2: ecspi@83fac000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx51-ecspi";
|
|
reg = <0x83fac000 0x4000>;
|
|
interrupts = <37>;
|
|
clocks = <&clks 53>, <&clks 54>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma: sdma@83fb0000 {
|
|
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
|
|
reg = <0x83fb0000 0x4000>;
|
|
interrupts = <6>;
|
|
clocks = <&clks 56>, <&clks 56>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
|
|
};
|
|
|
|
cspi: cspi@83fc0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
|
|
reg = <0x83fc0000 0x4000>;
|
|
interrupts = <38>;
|
|
clocks = <&clks 55>, <&clks 55>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@83fc4000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
|
|
reg = <0x83fc4000 0x4000>;
|
|
interrupts = <63>;
|
|
clocks = <&clks 35>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@83fc8000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
|
|
reg = <0x83fc8000 0x4000>;
|
|
interrupts = <62>;
|
|
clocks = <&clks 34>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi1: ssi@83fcc000 {
|
|
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
|
|
reg = <0x83fcc000 0x4000>;
|
|
interrupts = <29>;
|
|
clocks = <&clks 48>;
|
|
dmas = <&sdma 28 0 0>,
|
|
<&sdma 29 0 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <15>;
|
|
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
audmux: audmux@83fd0000 {
|
|
compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
|
|
reg = <0x83fd0000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
weim: weim@83fda000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,imx51-weim";
|
|
reg = <0x83fda000 0x1000>;
|
|
clocks = <&clks 57>;
|
|
ranges = <
|
|
0 0 0xb0000000 0x08000000
|
|
1 0 0xb8000000 0x08000000
|
|
2 0 0xc0000000 0x08000000
|
|
3 0 0xc8000000 0x04000000
|
|
4 0 0xcc000000 0x02000000
|
|
5 0 0xce000000 0x02000000
|
|
>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nfc: nand@83fdb000 {
|
|
compatible = "fsl,imx51-nand";
|
|
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
|
|
interrupts = <8>;
|
|
clocks = <&clks 60>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pata: pata@83fe0000 {
|
|
compatible = "fsl,imx51-pata", "fsl,imx27-pata";
|
|
reg = <0x83fe0000 0x4000>;
|
|
interrupts = <70>;
|
|
clocks = <&clks 172>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi3: ssi@83fe8000 {
|
|
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
|
|
reg = <0x83fe8000 0x4000>;
|
|
interrupts = <96>;
|
|
clocks = <&clks 50>;
|
|
dmas = <&sdma 46 0 0>,
|
|
<&sdma 47 0 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <15>;
|
|
fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
fec: ethernet@83fec000 {
|
|
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
|
|
reg = <0x83fec000 0x4000>;
|
|
interrupts = <87>;
|
|
clocks = <&clks 42>, <&clks 42>, <&clks 42>;
|
|
clock-names = "ipg", "ahb", "ptp";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
};
|