linux/arch/x86/mm/tlb.c
Andy Lutomirski 59f537c1de x86/mm: Change the leave_mm() condition for local TLB flushes
On a remote TLB flush, we leave_mm() if we're TLBSTATE_LAZY.  For a
local flush_tlb_mm_range(), we leave_mm() if !current->mm.  These
are approximately the same condition -- the scheduler sets lazy TLB
mode when switching to a thread with no mm.

I'm about to merge the local and remote flush code, but for ease of
verifying and bisecting the patch, I want the local and remote flush
behavior to match first.  This patch changes the local code to match
the remote code.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-05 09:59:42 +02:00

462 lines
12 KiB
C

#include <linux/init.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/export.h>
#include <linux/cpu.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
#include <asm/cache.h>
#include <asm/apic.h>
#include <asm/uv/uv.h>
#include <linux/debugfs.h>
/*
* Smarter SMP flushing macros.
* c/o Linus Torvalds.
*
* These mean you can really definitely utterly forget about
* writing to user space from interrupts. (Its not allowed anyway).
*
* Optimizations Manfred Spraul <manfred@colorfullife.com>
*
* More scalable flush, from Andi Kleen
*
* Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
*/
#ifdef CONFIG_SMP
/*
* We cannot call mmdrop() because we are in interrupt context,
* instead update mm->cpu_vm_mask.
*/
void leave_mm(int cpu)
{
struct mm_struct *active_mm = this_cpu_read(cpu_tlbstate.active_mm);
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
BUG();
if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
load_cr3(swapper_pg_dir);
/*
* This gets called in the idle path where RCU
* functions differently. Tracing normally
* uses RCU, so we have to call the tracepoint
* specially here.
*/
trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
}
}
EXPORT_SYMBOL_GPL(leave_mm);
#endif /* CONFIG_SMP */
void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
unsigned long flags;
local_irq_save(flags);
switch_mm_irqs_off(prev, next, tsk);
local_irq_restore(flags);
}
void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
unsigned cpu = smp_processor_id();
if (likely(prev != next)) {
if (IS_ENABLED(CONFIG_VMAP_STACK)) {
/*
* If our current stack is in vmalloc space and isn't
* mapped in the new pgd, we'll double-fault. Forcibly
* map it.
*/
unsigned int stack_pgd_index = pgd_index(current_stack_pointer());
pgd_t *pgd = next->pgd + stack_pgd_index;
if (unlikely(pgd_none(*pgd)))
set_pgd(pgd, init_mm.pgd[stack_pgd_index]);
}
#ifdef CONFIG_SMP
this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
this_cpu_write(cpu_tlbstate.active_mm, next);
#endif
cpumask_set_cpu(cpu, mm_cpumask(next));
/*
* Re-load page tables.
*
* This logic has an ordering constraint:
*
* CPU 0: Write to a PTE for 'next'
* CPU 0: load bit 1 in mm_cpumask. if nonzero, send IPI.
* CPU 1: set bit 1 in next's mm_cpumask
* CPU 1: load from the PTE that CPU 0 writes (implicit)
*
* We need to prevent an outcome in which CPU 1 observes
* the new PTE value and CPU 0 observes bit 1 clear in
* mm_cpumask. (If that occurs, then the IPI will never
* be sent, and CPU 0's TLB will contain a stale entry.)
*
* The bad outcome can occur if either CPU's load is
* reordered before that CPU's store, so both CPUs must
* execute full barriers to prevent this from happening.
*
* Thus, switch_mm needs a full barrier between the
* store to mm_cpumask and any operation that could load
* from next->pgd. TLB fills are special and can happen
* due to instruction fetches or for no reason at all,
* and neither LOCK nor MFENCE orders them.
* Fortunately, load_cr3() is serializing and gives the
* ordering guarantee we need.
*
*/
load_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
/* Stop flush ipis for the previous mm */
cpumask_clear_cpu(cpu, mm_cpumask(prev));
/* Load per-mm CR4 state */
load_mm_cr4(next);
#ifdef CONFIG_MODIFY_LDT_SYSCALL
/*
* Load the LDT, if the LDT is different.
*
* It's possible that prev->context.ldt doesn't match
* the LDT register. This can happen if leave_mm(prev)
* was called and then modify_ldt changed
* prev->context.ldt but suppressed an IPI to this CPU.
* In this case, prev->context.ldt != NULL, because we
* never set context.ldt to NULL while the mm still
* exists. That means that next->context.ldt !=
* prev->context.ldt, because mms never share an LDT.
*/
if (unlikely(prev->context.ldt != next->context.ldt))
load_mm_ldt(next);
#endif
}
#ifdef CONFIG_SMP
else {
this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
/*
* On established mms, the mm_cpumask is only changed
* from irq context, from ptep_clear_flush() while in
* lazy tlb mode, and here. Irqs are blocked during
* schedule, protecting us from simultaneous changes.
*/
cpumask_set_cpu(cpu, mm_cpumask(next));
/*
* We were in lazy tlb mode and leave_mm disabled
* tlb flush IPI delivery. We must reload CR3
* to make sure to use no freed page tables.
*
* As above, load_cr3() is serializing and orders TLB
* fills with respect to the mm_cpumask write.
*/
load_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
load_mm_cr4(next);
load_mm_ldt(next);
}
}
#endif
}
#ifdef CONFIG_SMP
/*
* The flush IPI assumes that a thread switch happens in this order:
* [cpu0: the cpu that switches]
* 1) switch_mm() either 1a) or 1b)
* 1a) thread switch to a different mm
* 1a1) set cpu_tlbstate to TLBSTATE_OK
* Now the tlb flush NMI handler flush_tlb_func won't call leave_mm
* if cpu0 was in lazy tlb mode.
* 1a2) update cpu active_mm
* Now cpu0 accepts tlb flushes for the new mm.
* 1a3) cpu_set(cpu, new_mm->cpu_vm_mask);
* Now the other cpus will send tlb flush ipis.
* 1a4) change cr3.
* 1a5) cpu_clear(cpu, old_mm->cpu_vm_mask);
* Stop ipi delivery for the old mm. This is not synchronized with
* the other cpus, but flush_tlb_func ignore flush ipis for the wrong
* mm, and in the worst case we perform a superfluous tlb flush.
* 1b) thread switch without mm change
* cpu active_mm is correct, cpu0 already handles flush ipis.
* 1b1) set cpu_tlbstate to TLBSTATE_OK
* 1b2) test_and_set the cpu bit in cpu_vm_mask.
* Atomically set the bit [other cpus will start sending flush ipis],
* and test the bit.
* 1b3) if the bit was 0: leave_mm was called, flush the tlb.
* 2) switch %%esp, ie current
*
* The interrupt must handle 2 special cases:
* - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
* - the cpu performs speculative tlb reads, i.e. even if the cpu only
* runs in kernel space, the cpu could load tlb entries for user space
* pages.
*
* The good news is that cpu_tlbstate is local to each cpu, no
* write/read ordering problems.
*/
/*
* TLB flush funcation:
* 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
* 2) Leave the mm if we are in the lazy tlb mode.
*/
static void flush_tlb_func(void *info)
{
const struct flush_tlb_info *f = info;
inc_irq_stat(irq_tlb_count);
if (f->mm && f->mm != this_cpu_read(cpu_tlbstate.active_mm))
return;
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
if (this_cpu_read(cpu_tlbstate.state) != TLBSTATE_OK) {
leave_mm(smp_processor_id());
return;
}
if (f->end == TLB_FLUSH_ALL) {
local_flush_tlb();
trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, TLB_FLUSH_ALL);
} else {
unsigned long addr;
unsigned long nr_pages =
(f->end - f->start) / PAGE_SIZE;
addr = f->start;
while (addr < f->end) {
__flush_tlb_single(addr);
addr += PAGE_SIZE;
}
trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, nr_pages);
}
}
void native_flush_tlb_others(const struct cpumask *cpumask,
const struct flush_tlb_info *info)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
if (info->end == TLB_FLUSH_ALL)
trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL);
else
trace_tlb_flush(TLB_REMOTE_SEND_IPI,
(info->end - info->start) >> PAGE_SHIFT);
if (is_uv_system()) {
unsigned int cpu;
cpu = smp_processor_id();
cpumask = uv_flush_tlb_others(cpumask, info);
if (cpumask)
smp_call_function_many(cpumask, flush_tlb_func,
(void *)info, 1);
return;
}
smp_call_function_many(cpumask, flush_tlb_func,
(void *)info, 1);
}
/*
* See Documentation/x86/tlb.txt for details. We choose 33
* because it is large enough to cover the vast majority (at
* least 95%) of allocations, and is small enough that we are
* confident it will not cause too much overhead. Each single
* flush is about 100 ns, so this caps the maximum overhead at
* _about_ 3,000 ns.
*
* This is in units of pages.
*/
static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33;
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag)
{
unsigned long addr;
struct flush_tlb_info info;
/* do a global flush by default */
unsigned long base_pages_to_flush = TLB_FLUSH_ALL;
preempt_disable();
if ((end != TLB_FLUSH_ALL) && !(vmflag & VM_HUGETLB))
base_pages_to_flush = (end - start) >> PAGE_SHIFT;
if (base_pages_to_flush > tlb_single_page_flush_ceiling)
base_pages_to_flush = TLB_FLUSH_ALL;
if (current->active_mm != mm) {
/* Synchronize with switch_mm. */
smp_mb();
goto out;
}
if (this_cpu_read(cpu_tlbstate.state) != TLBSTATE_OK) {
leave_mm(smp_processor_id());
/* Synchronize with switch_mm. */
smp_mb();
goto out;
}
/*
* Both branches below are implicit full barriers (MOV to CR or
* INVLPG) that synchronize with switch_mm.
*/
if (base_pages_to_flush == TLB_FLUSH_ALL) {
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
} else {
/* flush range by one by one 'invlpg' */
for (addr = start; addr < end; addr += PAGE_SIZE) {
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
__flush_tlb_single(addr);
}
}
trace_tlb_flush(TLB_LOCAL_MM_SHOOTDOWN, base_pages_to_flush);
out:
info.mm = mm;
if (base_pages_to_flush == TLB_FLUSH_ALL) {
info.start = 0UL;
info.end = TLB_FLUSH_ALL;
} else {
info.start = start;
info.end = end;
}
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), &info);
preempt_enable();
}
static void do_flush_tlb_all(void *info)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
__flush_tlb_all();
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
leave_mm(smp_processor_id());
}
void flush_tlb_all(void)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
on_each_cpu(do_flush_tlb_all, NULL, 1);
}
static void do_kernel_range_flush(void *info)
{
struct flush_tlb_info *f = info;
unsigned long addr;
/* flush range by one by one 'invlpg' */
for (addr = f->start; addr < f->end; addr += PAGE_SIZE)
__flush_tlb_single(addr);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
/* Balance as user space task's flush, a bit conservative */
if (end == TLB_FLUSH_ALL ||
(end - start) > tlb_single_page_flush_ceiling * PAGE_SIZE) {
on_each_cpu(do_flush_tlb_all, NULL, 1);
} else {
struct flush_tlb_info info;
info.start = start;
info.end = end;
on_each_cpu(do_kernel_range_flush, &info, 1);
}
}
void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
{
struct flush_tlb_info info = {
.mm = NULL,
.start = 0UL,
.end = TLB_FLUSH_ALL,
};
int cpu = get_cpu();
if (cpumask_test_cpu(cpu, &batch->cpumask)) {
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
trace_tlb_flush(TLB_LOCAL_SHOOTDOWN, TLB_FLUSH_ALL);
}
if (cpumask_any_but(&batch->cpumask, cpu) < nr_cpu_ids)
flush_tlb_others(&batch->cpumask, &info);
cpumask_clear(&batch->cpumask);
put_cpu();
}
static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char buf[32];
unsigned int len;
len = sprintf(buf, "%ld\n", tlb_single_page_flush_ceiling);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t tlbflush_write_file(struct file *file,
const char __user *user_buf, size_t count, loff_t *ppos)
{
char buf[32];
ssize_t len;
int ceiling;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (kstrtoint(buf, 0, &ceiling))
return -EINVAL;
if (ceiling < 0)
return -EINVAL;
tlb_single_page_flush_ceiling = ceiling;
return count;
}
static const struct file_operations fops_tlbflush = {
.read = tlbflush_read_file,
.write = tlbflush_write_file,
.llseek = default_llseek,
};
static int __init create_tlb_single_page_flush_ceiling(void)
{
debugfs_create_file("tlb_single_page_flush_ceiling", S_IRUSR | S_IWUSR,
arch_debugfs_dir, NULL, &fops_tlbflush);
return 0;
}
late_initcall(create_tlb_single_page_flush_ceiling);
#endif /* CONFIG_SMP */