leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
59d92875a6
linux/arch/arm/mach-u300/core.c
Linus Walleij b263e9b887 pinctrl: get rid of all platform data for coh901 
This deletes the dependency on any platform data for
the COH901 pin controller. There is only one user in the
kernel, and if we at some point want to support more
variants, they shall provide their variant info through
the device tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 13:54:38 +02:00

416 lines
11 KiB
C
Raw Blame History

/*
*
* arch/arm/mach-u300/core.c
*
*
* Copyright (C) 2007-2012 ST-Ericsson SA
* License terms: GNU General Public License (GPL) version 2
* Core platform support, IRQ handling and device definitions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/kernel.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/clk-u300.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/clocksource.h>
#include <linux/clk.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
/*
* These are the large blocks of memory allocated for I/O.
* the defines are used for setting up the I/O memory mapping.
*/
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
/* NFIF */
#define U300_NAND_IF_PHYS_BASE 0x9f800000
/* ALE, CLE offset for FSMC NAND */
#define PLAT_NAND_CLE (1 << 16)
#define PLAT_NAND_ALE (1 << 17)
/* AHB Peripherals */
#define U300_AHB_PER_PHYS_BASE 0xa0000000
#define U300_AHB_PER_VIRT_BASE 0xff010000
/* FAST Peripherals */
#define U300_FAST_PER_PHYS_BASE 0xc0000000
#define U300_FAST_PER_VIRT_BASE 0xff020000
/* SLOW Peripherals */
#define U300_SLOW_PER_PHYS_BASE 0xc0010000
#define U300_SLOW_PER_VIRT_BASE 0xff000000
/* Boot ROM */
#define U300_BOOTROM_PHYS_BASE 0xffff0000
#define U300_BOOTROM_VIRT_BASE 0xffff0000
/* SEMI config base */
#define U300_SEMI_CONFIG_BASE 0x2FFE0000
/*
* AHB peripherals
*/
/* AHB Peripherals Bridge Controller */
#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
/* Vectored Interrupt Controller 0, servicing 32 interrupts */
#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
/* Vectored Interrupt Controller 1, servicing 32 interrupts */
#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
/* Memory Stick Pro (MSPRO) controller */
#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
/* EMIF Configuration Area */
#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
/*
* FAST peripherals
*/
/* FAST bridge control */
#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
/* MMC/SD controller */
#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
/* PCM I2S0 controller */
#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
/* PCM I2S1 controller */
#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
/* I2C0 controller */
#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
/* I2C1 controller */
#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
/* SPI controller */
#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
/* Fast UART1 on U335 only */
#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000)
/*
* SLOW peripherals
*/
/* SLOW bridge control */
#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
/* SYSCON */
#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
/* Watchdog */
#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
/* UART0 */
#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
/* APP side special timer */
#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
/* Keypad */
#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
/* GPIO */
#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
/* RTC */
#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
/* Bus tracer */
#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
/* Event handler (hardware queue) */
#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
/* Genric Timer */
#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
/* PPM */
#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
/*
* REST peripherals
*/
/* ISP (image signal processor) */
#define U300_ISP_BASE (0xA0008000)
/* DMA Controller base */
#define U300_DMAC_BASE (0xC0020000)
/* MSL Base */
#define U300_MSL_BASE (0xc0022000)
/* APEX Base */
#define U300_APEX_BASE (0xc0030000)
/* Video Encoder Base */
#define U300_VIDEOENC_BASE (0xc0080000)
/* XGAM Base */
#define U300_XGAM_BASE (0xd0000000)
/*
* SYSCON addresses applicable to the core machine.
*/
/* Chip ID register 16bit (R/-) */
#define U300_SYSCON_CIDR (0x400)
/* SMCR */
#define U300_SYSCON_SMCR (0x4d0)
#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
#define U300_SYSCON_CSDR (0x4f0)
#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
/* PRINT_CONTROL Print Control 16bit (R/-) */
#define U300_SYSCON_PCR (0x4f8)
#define U300_SYSCON_PCR_SERV_IND (0x0001)
/* BOOT_CONTROL 16bit (R/-) */
#define U300_SYSCON_BCR (0x4fc)
#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
static void __iomem *syscon_base;
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
* only things we need are the areas where we find the timer, syscon and
* intcon, since the remaining device drivers will map their own memory
* physical to virtual as the need arise.
*/
static struct map_desc u300_io_desc[] __initdata = {
{
.virtual = U300_SLOW_PER_VIRT_BASE,
.pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
.length = SZ_64K,
.type = MT_DEVICE,
},
{
.virtual = U300_AHB_PER_VIRT_BASE,
.pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
.length = SZ_32K,
.type = MT_DEVICE,
},
{
.virtual = U300_FAST_PER_VIRT_BASE,
.pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
.length = SZ_32K,
.type = MT_DEVICE,
},
};
static void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
}
static unsigned long pin_pullup_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
};
static unsigned long pin_highz_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0),
};
/* Pin control settings */
static struct pinctrl_map __initdata u300_pinmux_map[] = {
/* anonymous maps for chip power and EMIFs */
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"),
/* per-device maps for MMC/SD, SPI and UART */
PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
/* This pin is used for clock return rather than GPIO */
PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11",
pin_pullup_conf),
/* This pin is used for card detect */
PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS",
pin_highz_conf),
};
struct db_chip {
u16 chipid;
const char *name;
};
/*
* This is a list of the Digital Baseband chips used in the U300 platform.
*/
static struct db_chip db_chips[] __initdata = {
{
.chipid = 0xb800,
.name = "DB3000",
},
{
.chipid = 0xc000,
.name = "DB3100",
},
{
.chipid = 0xc800,
.name = "DB3150",
},
{
.chipid = 0xd800,
.name = "DB3200",
},
{
.chipid = 0xe000,
.name = "DB3250",
},
{
.chipid = 0xe800,
.name = "DB3210",
},
{
.chipid = 0xf000,
.name = "DB3350 P1x",
},
{
.chipid = 0xf100,
.name = "DB3350 P2x",
},
{
.chipid = 0x0000, /* List terminator */
.name = NULL,
}
};
static void __init u300_init_check_chip(void)
{
u16 val;
struct db_chip *chip;
const char *chipname;
const char unknown[] = "UNKNOWN";
/* Read out and print chip ID */
val = readw(syscon_base + U300_SYSCON_CIDR);
/* This is in funky bigendian order... */
val = (val & 0xFFU) << 8 | (val >> 8);
chip = db_chips;
chipname = unknown;
for ( ; chip->chipid; chip++) {
if (chip->chipid == (val & 0xFF00U)) {
chipname = chip->name;
break;
}
}
printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
"(chip ID 0x%04x)\n", chipname, val);
if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
printk(KERN_ERR "Platform configured for BS335 " \
" with DB3350 but %s detected, expect problems!",
chipname);
}
}
/* Forward declare this function from the watchdog */
void coh901327_watchdog_reset(void);
static void u300_restart(char mode, const char *cmd)
{
switch (mode) {
case 's':
case 'h':
#ifdef CONFIG_COH901327_WATCHDOG
coh901327_watchdog_reset();
#endif
break;
default:
/* Do nothing */
break;
}
/* Wait for system do die/reset. */
while (1);
}
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE,
"pinctrl-u300", NULL),
OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE,
"u300-gpio", NULL),
OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE,
"coh901327_wdog", NULL),
OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE,
"rtc-coh901331", NULL),
OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE,
"coh901318", NULL),
OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE,
"fsmc-nand", NULL),
OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE,
"uart0", NULL),
OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE,
"uart1", NULL),
OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE,
"pl022", NULL),
OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE,
"stu300.0", NULL),
OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE,
"stu300.1", NULL),
OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE,
"mmci", NULL),
{ /* sentinel */ },
};
static void __init u300_init_irq_dt(void)
{
struct device_node *syscon;
struct clk *clk;
syscon = of_find_node_by_path("/syscon@c0011000");
if (!syscon) {
pr_crit("could not find syscon node\n");
return;
}
syscon_base = of_iomap(syscon, 0);
if (!syscon_base) {
pr_crit("could not remap syscon\n");
return;
}
/* initialize clocking early, we want to clock the INTCON */
u300_clk_init(syscon_base);
/* Bootstrap EMIF and SEMI clocks */
clk = clk_get_sys("pl172", NULL);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
clk = clk_get_sys("semi", NULL);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
/* Clock the interrupt controller */
clk = clk_get_sys("intcon", NULL);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
irqchip_init();
}
static void __init u300_init_machine_dt(void)
{
u16 val;
/* Check what platform we run and print some status information */
u300_init_check_chip();
/* Initialize pinmuxing */
pinctrl_register_mappings(u300_pinmux_map,
ARRAY_SIZE(u300_pinmux_map));
of_platform_populate(NULL, of_default_bus_match_table,
u300_auxdata_lookup, NULL);
/* Enable SEMI self refresh */
val = readw(syscon_base + U300_SYSCON_SMCR) |
U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
writew(val, syscon_base + U300_SYSCON_SMCR);
}
static const char * u300_board_compat[] = {
"stericsson,u300",
NULL,
};
DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
.map_io = u300_map_io,
.init_irq = u300_init_irq_dt,
.init_time = clocksource_of_init,
.init_machine = u300_init_machine_dt,
.restart = u300_restart,
.dt_compat = u300_board_compat,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink