leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
59d69bc821
linux/drivers/hid/wacom_wac.c
Benjamin Tissoires 59d69bc821 HID: wacom: EKR: have one power_supply per remote 
Previously, all the remotes attached to the same receiver would share the
same power_supply. That's not good as the remotes will constantly change
the battery information according to their own state.

To have something generic enough, we introduce struct wacom_battery
which regroups all the information we need for a battery.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05 13:39:18 +02:00

3595 lines
113 KiB
C
Raw Blame History

/*
* drivers/input/tablet/wacom_wac.c
*
* USB Wacom tablet support - Wacom specific code
*
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "wacom_wac.h"
#include "wacom.h"
#include <linux/input/mt.h>
/* resolution for penabled devices */
#define WACOM_PL_RES 20
#define WACOM_PENPRTN_RES 40
#define WACOM_VOLITO_RES 50
#define WACOM_GRAPHIRE_RES 80
#define WACOM_INTUOS_RES 100
#define WACOM_INTUOS3_RES 200
/* Newer Cintiq and DTU have an offset between tablet and screen areas */
#define WACOM_DTU_OFFSET 200
#define WACOM_CINTIQ_OFFSET 400
/*
* Scale factor relating reported contact size to logical contact area.
* 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
*/
#define WACOM_CONTACT_AREA_SCALE 2607
static void wacom_report_numbered_buttons(struct input_dev *input_dev,
int button_count, int mask);
/*
* Percent of battery capacity for Graphire.
* 8th value means AC online and show 100% capacity.
*/
static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 };
/*
* Percent of battery capacity for Intuos4 WL, AC has a separate bit.
*/
static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 };
static void __wacom_notify_battery(struct wacom_battery *battery,
int bat_capacity, bool bat_charging,
bool bat_connected, bool ps_connected)
{
bool changed = battery->battery_capacity != bat_capacity ||
battery->bat_charging != bat_charging ||
battery->bat_connected != bat_connected ||
battery->ps_connected != ps_connected;
if (changed) {
battery->battery_capacity = bat_capacity;
battery->bat_charging = bat_charging;
battery->bat_connected = bat_connected;
battery->ps_connected = ps_connected;
if (battery->battery)
power_supply_changed(battery->battery);
}
}
static void wacom_notify_battery(struct wacom_wac *wacom_wac,
int bat_capacity, bool bat_charging, bool bat_connected,
bool ps_connected)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
__wacom_notify_battery(&wacom->battery, bat_capacity, bat_charging,
bat_connected, ps_connected);
}
static int wacom_penpartner_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
switch (data[0]) {
case 1:
if (data[5] & 0x80) {
wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
input_report_key(input, wacom->tool[0], 1);
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127));
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
} else {
input_report_key(input, wacom->tool[0], 0);
input_report_abs(input, ABS_MISC, 0); /* report tool id */
input_report_abs(input, ABS_PRESSURE, -1);
input_report_key(input, BTN_TOUCH, 0);
}
break;
case 2:
input_report_key(input, BTN_TOOL_PEN, 1);
input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
break;
default:
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
return 1;
}
static int wacom_pl_irq(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int prox, pressure;
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
prox = data[1] & 0x40;
if (!wacom->id[0]) {
if ((data[0] & 0x10) || (data[4] & 0x20)) {
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
}
else {
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
}
}
/* If the eraser is in prox, STYLUS2 is always set. If we
* mis-detected the type and notice that STYLUS2 isn't set
* then force the eraser out of prox and let the pen in.
*/
if (wacom->tool[0] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
input_report_key(input, BTN_TOOL_RUBBER, 0);
input_report_abs(input, ABS_MISC, 0);
input_sync(input);
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
}
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
if (features->pressure_max > 255)
pressure = (pressure << 1) | ((data[4] >> 6) & 1);
pressure += (features->pressure_max + 1) / 2;
input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
input_report_abs(input, ABS_PRESSURE, pressure);
input_report_key(input, BTN_TOUCH, data[4] & 0x08);
input_report_key(input, BTN_STYLUS, data[4] & 0x10);
/* Only allow the stylus2 button to be reported for the pen tool. */
input_report_key(input, BTN_STYLUS2, (wacom->tool[0] == BTN_TOOL_PEN) && (data[4] & 0x20));
if (!prox)
wacom->id[0] = 0;
input_report_key(input, wacom->tool[0], prox);
input_report_abs(input, ABS_MISC, wacom->id[0]);
return 1;
}
static int wacom_ptu_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
if (data[1] & 0x04) {
input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20);
input_report_key(input, BTN_TOUCH, data[1] & 0x08);
wacom->id[0] = ERASER_DEVICE_ID;
} else {
input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20);
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
wacom->id[0] = STYLUS_DEVICE_ID;
}
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
return 1;
}
static int wacom_dtu_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int prox = data[1] & 0x20;
dev_dbg(input->dev.parent,
"%s: received report #%d", __func__, data[0]);
if (prox) {
/* Going into proximity select tool */
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
if (wacom->tool[0] == BTN_TOOL_PEN)
wacom->id[0] = STYLUS_DEVICE_ID;
else
wacom->id[0] = ERASER_DEVICE_ID;
}
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]);
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
if (!prox) /* out-prox */
wacom->id[0] = 0;
input_report_key(input, wacom->tool[0], prox);
input_report_abs(input, ABS_MISC, wacom->id[0]);
return 1;
}
static int wacom_dtus_irq(struct wacom_wac *wacom)
{
char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
unsigned short prox, pressure = 0;
if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d", __func__, data[0]);
return 0;
} else if (data[0] == WACOM_REPORT_DTUSPAD) {
input = wacom->pad_input;
input_report_key(input, BTN_0, (data[1] & 0x01));
input_report_key(input, BTN_1, (data[1] & 0x02));
input_report_key(input, BTN_2, (data[1] & 0x04));
input_report_key(input, BTN_3, (data[1] & 0x08));
input_report_abs(input, ABS_MISC,
data[1] & 0x0f ? PAD_DEVICE_ID : 0);
return 1;
} else {
prox = data[1] & 0x80;
if (prox) {
switch ((data[1] >> 3) & 3) {
case 1: /* Rubber */
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
break;
case 2: /* Pen */
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
break;
}
}
input_report_key(input, BTN_STYLUS, data[1] & 0x20);
input_report_key(input, BTN_STYLUS2, data[1] & 0x40);
input_report_abs(input, ABS_X, get_unaligned_be16(&data[3]));
input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5]));
pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff);
input_report_abs(input, ABS_PRESSURE, pressure);
input_report_key(input, BTN_TOUCH, pressure > 10);
if (!prox) /* out-prox */
wacom->id[0] = 0;
input_report_key(input, wacom->tool[0], prox);
input_report_abs(input, ABS_MISC, wacom->id[0]);
return 1;
}
}
static int wacom_graphire_irq(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
struct input_dev *pad_input = wacom->pad_input;
int battery_capacity, ps_connected;
int prox;
int rw = 0;
int retval = 0;
if (features->type == GRAPHIRE_BT) {
if (data[0] != WACOM_REPORT_PENABLED_BT) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__,
data[0]);
goto exit;
}
} else if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
goto exit;
}
prox = data[1] & 0x80;
if (prox || wacom->id[0]) {
if (prox) {
switch ((data[1] >> 5) & 3) {
case 0: /* Pen */
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
break;
case 1: /* Rubber */
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
break;
case 2: /* Mouse with wheel */
input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
/* fall through */
case 3: /* Mouse without wheel */
wacom->tool[0] = BTN_TOOL_MOUSE;
wacom->id[0] = CURSOR_DEVICE_ID;
break;
}
}
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
if (features->type == GRAPHIRE_BT)
input_report_abs(input, ABS_PRESSURE, data[6] |
(((__u16) (data[1] & 0x08)) << 5));
else
input_report_abs(input, ABS_PRESSURE, data[6] |
((data[7] & 0x03) << 8));
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
} else {
input_report_key(input, BTN_LEFT, data[1] & 0x01);
input_report_key(input, BTN_RIGHT, data[1] & 0x02);
if (features->type == WACOM_G4 ||
features->type == WACOM_MO) {
input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
rw = (data[7] & 0x04) - (data[7] & 0x03);
} else if (features->type == GRAPHIRE_BT) {
/* Compute distance between mouse and tablet */
rw = 44 - (data[6] >> 2);
rw = clamp_val(rw, 0, 31);
input_report_abs(input, ABS_DISTANCE, rw);
if (((data[1] >> 5) & 3) == 2) {
/* Mouse with wheel */
input_report_key(input, BTN_MIDDLE,
data[1] & 0x04);
rw = (data[6] & 0x01) ? -1 :
(data[6] & 0x02) ? 1 : 0;
} else {
rw = 0;
}
} else {
input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
rw = -(signed char)data[6];
}
input_report_rel(input, REL_WHEEL, rw);
}
if (!prox)
wacom->id[0] = 0;
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_key(input, wacom->tool[0], prox);
input_sync(input); /* sync last event */
}
/* send pad data */
switch (features->type) {
case WACOM_G4:
prox = data[7] & 0xf8;
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(pad_input, BTN_BACK, (data[7] & 0x40));
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80));
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
input_report_rel(pad_input, REL_WHEEL, rw);
if (!prox)
wacom->id[1] = 0;
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
case WACOM_MO:
prox = (data[7] & 0xf8) || data[8];
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(pad_input, BTN_BACK, (data[7] & 0x08));
input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20));
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10));
input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40));
input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f));
if (!prox)
wacom->id[1] = 0;
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
case GRAPHIRE_BT:
prox = data[7] & 0x03;
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(pad_input, BTN_0, (data[7] & 0x02));
input_report_key(pad_input, BTN_1, (data[7] & 0x01));
if (!prox)
wacom->id[1] = 0;
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
}
/* Store current battery capacity and power supply state */
if (features->type == GRAPHIRE_BT) {
rw = (data[7] >> 2 & 0x07);
battery_capacity = batcap_gr[rw];
ps_connected = rw == 7;
wacom_notify_battery(wacom, battery_capacity, ps_connected,
1, ps_connected);
}
exit:
return retval;
}
static void wacom_intuos_schedule_prox_event(struct wacom_wac *wacom_wac)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
struct wacom_features *features = &wacom_wac->features;
struct hid_report *r;
struct hid_report_enum *re;
re = &(wacom->hdev->report_enum[HID_FEATURE_REPORT]);
if (features->type == INTUOSHT2)
r = re->report_id_hash[WACOM_REPORT_INTUOSHT2_ID];
else
r = re->report_id_hash[WACOM_REPORT_INTUOS_ID1];
if (r) {
hid_hw_request(wacom->hdev, r, HID_REQ_GET_REPORT);
}
}
static int wacom_intuos_pad(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pad_input;
int i;
int buttons = 0, nbuttons = features->numbered_buttons;
int keys = 0, nkeys = 0;
int ring1 = 0, ring2 = 0;
int strip1 = 0, strip2 = 0;
bool prox = false;
/* pad packets. Works as a second tool and is always in prox */
if (!(data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD ||
data[0] == WACOM_REPORT_CINTIQPAD))
return 0;
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
buttons = (data[3] << 1) | (data[2] & 0x01);
ring1 = data[1];
} else if (features->type == DTK) {
buttons = data[6];
} else if (features->type == WACOM_13HD) {
buttons = (data[4] << 1) | (data[3] & 0x01);
} else if (features->type == WACOM_24HD) {
buttons = (data[8] << 8) | data[6];
ring1 = data[1];
ring2 = data[2];
/*
* Three "buttons" are available on the 24HD which are
* physically implemented as a touchstrip. Each button
* is approximately 3 bits wide with a 2 bit spacing.
* The raw touchstrip bits are stored at:
* ((data[3] & 0x1f) << 8) | data[4])
*/
nkeys = 3;
keys = ((data[3] & 0x1C) ? 1<<2 : 0) |
((data[4] & 0xE0) ? 1<<1 : 0) |
((data[4] & 0x07) ? 1<<0 : 0);
} else if (features->type == WACOM_27QHD) {
nkeys = 3;
keys = data[2] & 0x07;
input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[4]));
input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[6]));
input_report_abs(input, ABS_Z, be16_to_cpup((__be16 *)&data[8]));
} else if (features->type == CINTIQ_HYBRID) {
/*
* Do not send hardware buttons under Android. They
* are already sent to the system through GPIO (and
* have different meaning).
*
* d-pad right -> data[4] & 0x10
* d-pad up -> data[4] & 0x20
* d-pad left -> data[4] & 0x40
* d-pad down -> data[4] & 0x80
* d-pad center -> data[3] & 0x01
*/
buttons = (data[4] << 1) | (data[3] & 0x01);
} else if (features->type == CINTIQ_COMPANION_2) {
/* d-pad right -> data[4] & 0x10
* d-pad up -> data[4] & 0x20
* d-pad left -> data[4] & 0x40
* d-pad down -> data[4] & 0x80
* d-pad center -> data[3] & 0x01
*/
buttons = ((data[2] >> 4) << 7) |
((data[1] & 0x04) << 6) |
((data[2] & 0x0F) << 2) |
(data[1] & 0x03);
} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
/*
* ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in
* addition to the mechanical switch. Switch data is
* stored in data[4], capacitive data in data[5].
*
* Touch ring mode switch (data[3]) has no capacitive sensor
*/
buttons = (data[4] << 1) | (data[3] & 0x01);
ring1 = data[2];
} else {
if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) {
buttons = (data[8] << 10) | ((data[7] & 0x01) << 9) |
(data[6] << 1) | (data[5] & 0x01);
if (features->type == WACOM_22HD) {
nkeys = 3;
keys = data[9] & 0x07;
}
} else {
buttons = ((data[6] & 0x10) << 10) |
((data[5] & 0x10) << 9) |
((data[6] & 0x0F) << 4) |
(data[5] & 0x0F);
}
strip1 = ((data[1] & 0x1f) << 8) | data[2];
strip2 = ((data[3] & 0x1f) << 8) | data[4];
}
prox = (buttons & ~(~0 << nbuttons)) | (keys & ~(~0 << nkeys)) |
(ring1 & 0x80) | (ring2 & 0x80) | strip1 | strip2;
wacom_report_numbered_buttons(input, nbuttons, buttons);
for (i = 0; i < nkeys; i++)
input_report_key(input, KEY_PROG1 + i, keys & (1 << i));
input_report_abs(input, ABS_RX, strip1);
input_report_abs(input, ABS_RY, strip2);
input_report_abs(input, ABS_WHEEL, (ring1 & 0x80) ? (ring1 & 0x7f) : 0);
input_report_abs(input, ABS_THROTTLE, (ring2 & 0x80) ? (ring2 & 0x7f) : 0);
input_report_key(input, wacom->tool[1], prox ? 1 : 0);
input_report_abs(input, ABS_MISC, prox ? PAD_DEVICE_ID : 0);
input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
return 1;
}
static int wacom_intuos_get_tool_type(int tool_id)
{
int tool_type;
switch (tool_id) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
case 0x120802: /* Intuos4/5 Inking Pen */
case 0x012:
tool_type = BTN_TOOL_PENCIL;
break;
case 0x822: /* Pen */
case 0x842:
case 0x852:
case 0x823: /* Intuos3 Grip Pen */
case 0x813: /* Intuos3 Classic Pen */
case 0x885: /* Intuos3 Marker Pen */
case 0x802: /* Intuos4/5 13HD/24HD General Pen */
case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */
case 0x8e2: /* IntuosHT2 pen */
case 0x022:
case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */
case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */
case 0x160802: /* Cintiq 13HD Pro Pen */
case 0x180802: /* DTH2242 Pen */
case 0x100802: /* Intuos4/5 13HD/24HD General Pen */
tool_type = BTN_TOOL_PEN;
break;
case 0x832: /* Stroke pen */
case 0x032:
tool_type = BTN_TOOL_BRUSH;
break;
case 0x007: /* Mouse 4D and 2D */
case 0x09c:
case 0x094:
case 0x017: /* Intuos3 2D Mouse */
case 0x806: /* Intuos4 Mouse */
tool_type = BTN_TOOL_MOUSE;
break;
case 0x096: /* Lens cursor */
case 0x097: /* Intuos3 Lens cursor */
case 0x006: /* Intuos4 Lens cursor */
tool_type = BTN_TOOL_LENS;
break;
case 0x82a: /* Eraser */
case 0x85a:
case 0x91a:
case 0xd1a:
case 0x0fa:
case 0x82b: /* Intuos3 Grip Pen Eraser */
case 0x81b: /* Intuos3 Classic Pen Eraser */
case 0x91b: /* Intuos3 Airbrush Eraser */
case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */
case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */
case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */
case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */
case 0x18080a: /* DTH2242 Eraser */
case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */
tool_type = BTN_TOOL_RUBBER;
break;
case 0xd12:
case 0x912:
case 0x112:
case 0x913: /* Intuos3 Airbrush */
case 0x902: /* Intuos4/5 13HD/24HD Airbrush */
case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */
tool_type = BTN_TOOL_AIRBRUSH;
break;
default: /* Unknown tool */
tool_type = BTN_TOOL_PEN;
break;
}
return tool_type;
}
static int wacom_intuos_inout(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
if (!(((data[1] & 0xfc) == 0xc0) || /* in prox */
((data[1] & 0xfe) == 0x20) || /* in range */
((data[1] & 0xfe) == 0x80))) /* out prox */
return 0;
/* Enter report */
if ((data[1] & 0xfc) == 0xc0) {
/* serial number of the tool */
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);
wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
wacom->tool[idx] = wacom_intuos_get_tool_type(wacom->id[idx]);
wacom->shared->stylus_in_proximity = true;
return 1;
}
/* in Range */
if ((data[1] & 0xfe) == 0x20) {
if (features->type != INTUOSHT2)
wacom->shared->stylus_in_proximity = true;
/* in Range while exiting */
if (wacom->reporting_data) {
input_report_key(input, BTN_TOUCH, 0);
input_report_abs(input, ABS_PRESSURE, 0);
input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max);
return 2;
}
return 1;
}
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
wacom->shared->stylus_in_proximity = false;
wacom->reporting_data = false;
/* don't report exit if we don't know the ID */
if (!wacom->id[idx])
return 1;
/*
* Reset all states otherwise we lose the initial states
* when in-prox next time
*/
input_report_abs(input, ABS_X, 0);
input_report_abs(input, ABS_Y, 0);
input_report_abs(input, ABS_DISTANCE, 0);
input_report_abs(input, ABS_TILT_X, 0);
input_report_abs(input, ABS_TILT_Y, 0);
if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
input_report_key(input, BTN_LEFT, 0);
input_report_key(input, BTN_MIDDLE, 0);
input_report_key(input, BTN_RIGHT, 0);
input_report_key(input, BTN_SIDE, 0);
input_report_key(input, BTN_EXTRA, 0);
input_report_abs(input, ABS_THROTTLE, 0);
input_report_abs(input, ABS_RZ, 0);
} else {
input_report_abs(input, ABS_PRESSURE, 0);
input_report_key(input, BTN_STYLUS, 0);
input_report_key(input, BTN_STYLUS2, 0);
input_report_key(input, BTN_TOUCH, 0);
input_report_abs(input, ABS_WHEEL, 0);
if (features->type >= INTUOS3S)
input_report_abs(input, ABS_Z, 0);
}
input_report_key(input, wacom->tool[idx], 0);
input_report_abs(input, ABS_MISC, 0); /* reset tool id */
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
wacom->id[idx] = 0;
return 2;
}
return 0;
}
static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
{
unsigned char *data = wacom_wac->data;
struct input_dev *input;
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
struct wacom_remote *remote = wacom->remote;
int bat_charging, bat_percent, touch_ring_mode;
__u32 serial;
int i, index = -1;
unsigned long flags;
if (data[0] != WACOM_REPORT_REMOTE) {
hid_dbg(wacom->hdev, "%s: received unknown report #%d",
__func__, data[0]);
return 0;
}
serial = data[3] + (data[4] << 8) + (data[5] << 16);
wacom_wac->id[0] = PAD_DEVICE_ID;
spin_lock_irqsave(&remote->remote_lock, flags);
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
if (remote->remotes[i].serial == serial) {
index = i;
break;
}
}
if (index < 0 || !remote->remotes[index].registered)
goto out;
input = remote->remotes[index].input;
input_report_key(input, BTN_0, (data[9] & 0x01));
input_report_key(input, BTN_1, (data[9] & 0x02));
input_report_key(input, BTN_2, (data[9] & 0x04));
input_report_key(input, BTN_3, (data[9] & 0x08));
input_report_key(input, BTN_4, (data[9] & 0x10));
input_report_key(input, BTN_5, (data[9] & 0x20));
input_report_key(input, BTN_6, (data[9] & 0x40));
input_report_key(input, BTN_7, (data[9] & 0x80));
input_report_key(input, BTN_8, (data[10] & 0x01));
input_report_key(input, BTN_9, (data[10] & 0x02));
input_report_key(input, BTN_A, (data[10] & 0x04));
input_report_key(input, BTN_B, (data[10] & 0x08));
input_report_key(input, BTN_C, (data[10] & 0x10));
input_report_key(input, BTN_X, (data[10] & 0x20));
input_report_key(input, BTN_Y, (data[10] & 0x40));
input_report_key(input, BTN_Z, (data[10] & 0x80));
input_report_key(input, BTN_BASE, (data[11] & 0x01));
input_report_key(input, BTN_BASE2, (data[11] & 0x02));
if (data[12] & 0x80)
input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
else
input_report_abs(input, ABS_WHEEL, 0);
bat_percent = data[7] & 0x7f;
bat_charging = !!(data[7] & 0x80);
if (data[9] | data[10] | (data[11] & 0x03) | data[12])
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
else
input_report_abs(input, ABS_MISC, 0);
input_event(input, EV_MSC, MSC_SERIAL, serial);
input_sync(input);
/*Which mode select (LED light) is currently on?*/
touch_ring_mode = (data[11] & 0xC0) >> 6;
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
if (remote->remotes[i].serial == serial)
wacom->led.groups[i].select = touch_ring_mode;
}
__wacom_notify_battery(&remote->remotes[index].battery, bat_percent,
bat_charging, 1, bat_charging);
out:
spin_unlock_irqrestore(&remote->remote_lock, flags);
return 0;
}
static void wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
unsigned char *data = wacom_wac->data;
struct wacom_remote *remote = wacom->remote;
struct wacom_remote_data remote_data;
unsigned long flags;
int i, ret;
if (data[0] != WACOM_REPORT_DEVICE_LIST)
return;
memset(&remote_data, 0, sizeof(struct wacom_remote_data));
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
int j = i * 6;
int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
bool connected = data[j+2];
remote_data.remote[i].serial = serial;
remote_data.remote[i].connected = connected;
}
spin_lock_irqsave(&remote->remote_lock, flags);
ret = kfifo_in(&remote->remote_fifo, &remote_data, sizeof(remote_data));
if (ret != sizeof(remote_data)) {
spin_unlock_irqrestore(&remote->remote_lock, flags);
hid_err(wacom->hdev, "Can't queue Remote status event.\n");
return;
}
spin_unlock_irqrestore(&remote->remote_lock, flags);
wacom_schedule_work(wacom_wac, WACOM_WORKER_REMOTE);
}
static int wacom_intuos_general(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
unsigned char type = (data[1] >> 1) & 0x0F;
unsigned int x, y, distance, t;
if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_CINTIQ &&
data[0] != WACOM_REPORT_INTUOS_PEN)
return 0;
if (wacom->shared->touch_down)
return 1;
/* don't report events if we don't know the tool ID */
if (!wacom->id[idx]) {
/* but reschedule a read of the current tool */
wacom_intuos_schedule_prox_event(wacom);
return 1;
}
/*
* don't report events for invalid data
*/
/* older I4 styli don't work with new Cintiqs */
if ((!((wacom->id[idx] >> 20) & 0x01) &&
(features->type == WACOM_21UX2)) ||
/* Only large Intuos support Lense Cursor */
(wacom->tool[idx] == BTN_TOOL_LENS &&
(features->type == INTUOS3 ||
features->type == INTUOS3S ||
features->type == INTUOS4 ||
features->type == INTUOS4S ||
features->type == INTUOS5 ||
features->type == INTUOS5S ||
features->type == INTUOSPM ||
features->type == INTUOSPS)) ||
/* Cintiq doesn't send data when RDY bit isn't set */
(features->type == CINTIQ && !(data[1] & 0x40)))
return 1;
x = (be16_to_cpup((__be16 *)&data[2]) << 1) | ((data[9] >> 1) & 1);
y = (be16_to_cpup((__be16 *)&data[4]) << 1) | (data[9] & 1);
distance = data[9] >> 2;
if (features->type < INTUOS3S) {
x >>= 1;
y >>= 1;
distance >>= 1;
}
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
input_report_abs(input, ABS_DISTANCE, distance);
switch (type) {
case 0x00:
case 0x01:
case 0x02:
case 0x03:
/* general pen packet */
t = (data[6] << 3) | ((data[7] & 0xC0) >> 5) | (data[1] & 1);
if (features->pressure_max < 2047)
t >>= 1;
input_report_abs(input, ABS_PRESSURE, t);
if (features->type != INTUOSHT2) {
input_report_abs(input, ABS_TILT_X,
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
}
input_report_key(input, BTN_STYLUS, data[1] & 2);
input_report_key(input, BTN_STYLUS2, data[1] & 4);
input_report_key(input, BTN_TOUCH, t > 10);
break;
case 0x0a:
/* airbrush second packet */
input_report_abs(input, ABS_WHEEL,
(data[6] << 2) | ((data[7] >> 6) & 3));
input_report_abs(input, ABS_TILT_X,
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
break;
case 0x05:
/* Rotation packet */
if (features->type >= INTUOS3S) {
/* I3 marker pen rotation */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
((t-1) / 2 + 450)) : (450 - t / 2) ;
input_report_abs(input, ABS_Z, t);
} else {
/* 4D mouse 2nd packet */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
input_report_abs(input, ABS_RZ, (data[7] & 0x20) ?
((t - 1) / 2) : -t / 2);
}
break;
case 0x04:
/* 4D mouse 1st packet */
input_report_key(input, BTN_LEFT, data[8] & 0x01);
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
input_report_key(input, BTN_SIDE, data[8] & 0x20);
input_report_key(input, BTN_EXTRA, data[8] & 0x10);
t = (data[6] << 2) | ((data[7] >> 6) & 3);
input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
break;
case 0x06:
/* I4 mouse */
input_report_key(input, BTN_LEFT, data[6] & 0x01);
input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
input_report_key(input, BTN_RIGHT, data[6] & 0x04);
input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7)
- ((data[7] & 0x40) >> 6));
input_report_key(input, BTN_SIDE, data[6] & 0x08);
input_report_key(input, BTN_EXTRA, data[6] & 0x10);
input_report_abs(input, ABS_TILT_X,
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
break;
case 0x08:
if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
/* 2D mouse packet */
input_report_key(input, BTN_LEFT, data[8] & 0x04);
input_report_key(input, BTN_MIDDLE, data[8] & 0x08);
input_report_key(input, BTN_RIGHT, data[8] & 0x10);
input_report_rel(input, REL_WHEEL, (data[8] & 0x01)
- ((data[8] & 0x02) >> 1));
/* I3 2D mouse side buttons */
if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
input_report_key(input, BTN_SIDE, data[8] & 0x40);
input_report_key(input, BTN_EXTRA, data[8] & 0x20);
}
}
else if (wacom->tool[idx] == BTN_TOOL_LENS) {
/* Lens cursor packets */
input_report_key(input, BTN_LEFT, data[8] & 0x01);
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
input_report_key(input, BTN_SIDE, data[8] & 0x10);
input_report_key(input, BTN_EXTRA, data[8] & 0x08);
}
break;
case 0x07:
case 0x09:
case 0x0b:
case 0x0c:
case 0x0d:
case 0x0e:
case 0x0f:
/* unhandled */
break;
}
input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */
input_report_key(input, wacom->tool[idx], 1);
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
wacom->reporting_data = true;
return 2;
}
static int wacom_intuos_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int result;
if (data[0] != WACOM_REPORT_PENABLED &&
data[0] != WACOM_REPORT_INTUOS_ID1 &&
data[0] != WACOM_REPORT_INTUOS_ID2 &&
data[0] != WACOM_REPORT_INTUOSPAD &&
data[0] != WACOM_REPORT_INTUOS_PEN &&
data[0] != WACOM_REPORT_CINTIQ &&
data[0] != WACOM_REPORT_CINTIQPAD &&
data[0] != WACOM_REPORT_INTUOS5PAD) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
/* process pad events */
result = wacom_intuos_pad(wacom);
if (result)
return result;
/* process in/out prox events */
result = wacom_intuos_inout(wacom);
if (result)
return result - 1;
/* process general packets */
result = wacom_intuos_general(wacom);
if (result)
return result - 1;
return 0;
}
static int int_dist(int x1, int y1, int x2, int y2)
{
int x = x2 - x1;
int y = y2 - y1;
return int_sqrt(x*x + y*y);
}
static void wacom_intuos_bt_process_data(struct wacom_wac *wacom,
unsigned char *data)
{
memcpy(wacom->data, data, 10);
wacom_intuos_irq(wacom);
input_sync(wacom->pen_input);
if (wacom->pad_input)
input_sync(wacom->pad_input);
}
static int wacom_intuos_bt_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char data[WACOM_PKGLEN_MAX];
int i = 1;
unsigned power_raw, battery_capacity, bat_charging, ps_connected;
memcpy(data, wacom->data, len);
switch (data[0]) {
case 0x04:
wacom_intuos_bt_process_data(wacom, data + i);
i += 10;
/* fall through */
case 0x03:
wacom_intuos_bt_process_data(wacom, data + i);
i += 10;
wacom_intuos_bt_process_data(wacom, data + i);
i += 10;
power_raw = data[i];
bat_charging = (power_raw & 0x08) ? 1 : 0;
ps_connected = (power_raw & 0x10) ? 1 : 0;
battery_capacity = batcap_i4[power_raw & 0x07];
wacom_notify_battery(wacom, battery_capacity, bat_charging,
battery_capacity || bat_charging,
ps_connected);
break;
default:
dev_dbg(wacom->pen_input->dev.parent,
"Unknown report: %d,%d size:%zu\n",
data[0], data[1], len);
return 0;
}
return 0;
}
static int wacom_wac_finger_count_touches(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned touch_max = wacom->features.touch_max;
int count = 0;
int i;
if (!touch_max)
return 0;
if (touch_max == 1)
return test_bit(BTN_TOUCH, input->key) &&
!wacom->shared->stylus_in_proximity;
for (i = 0; i < input->mt->num_slots; i++) {
struct input_mt_slot *ps = &input->mt->slots[i];
int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
if (id >= 0)
count++;
}
return count;
}
static int wacom_24hdt_irq(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned char *data = wacom->data;
int i;
int current_num_contacts = data[61];
int contacts_to_send = 0;
int num_contacts_left = 4; /* maximum contacts per packet */
int byte_per_packet = WACOM_BYTES_PER_24HDT_PACKET;
int y_offset = 2;
if (wacom->features.type == WACOM_27QHDT) {
current_num_contacts = data[63];
num_contacts_left = 10;
byte_per_packet = WACOM_BYTES_PER_QHDTHID_PACKET;
y_offset = 0;
}
/*
* First packet resets the counter since only the first
* packet in series will have non-zero current_num_contacts.
*/
if (current_num_contacts)
wacom->num_contacts_left = current_num_contacts;
contacts_to_send = min(num_contacts_left, wacom->num_contacts_left);
for (i = 0; i < contacts_to_send; i++) {
int offset = (byte_per_packet * i) + 1;
bool touch = (data[offset] & 0x1) && !wacom->shared->stylus_in_proximity;
int slot = input_mt_get_slot_by_key(input, data[offset + 1]);
if (slot < 0)
continue;
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int t_x = get_unaligned_le16(&data[offset + 2]);
int t_y = get_unaligned_le16(&data[offset + 4 + y_offset]);
input_report_abs(input, ABS_MT_POSITION_X, t_x);
input_report_abs(input, ABS_MT_POSITION_Y, t_y);
if (wacom->features.type != WACOM_27QHDT) {
int c_x = get_unaligned_le16(&data[offset + 4]);
int c_y = get_unaligned_le16(&data[offset + 8]);
int w = get_unaligned_le16(&data[offset + 10]);
int h = get_unaligned_le16(&data[offset + 12]);
input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h));
input_report_abs(input, ABS_MT_WIDTH_MAJOR,
min(w, h) + int_dist(t_x, t_y, c_x, c_y));
input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
input_report_abs(input, ABS_MT_ORIENTATION, w > h);
}
}
}
input_mt_sync_frame(input);
wacom->num_contacts_left -= contacts_to_send;
if (wacom->num_contacts_left <= 0) {
wacom->num_contacts_left = 0;
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
}
return 1;
}
static int wacom_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned char *data = wacom->data;
int i;
int current_num_contacts = data[2];
int contacts_to_send = 0;
int x_offset = 0;
/* MTTPC does not support Height and Width */
if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B)
x_offset = -4;
/*
* First packet resets the counter since only the first
* packet in series will have non-zero current_num_contacts.
*/
if (current_num_contacts)
wacom->num_contacts_left = current_num_contacts;
/* There are at most 5 contacts per packet */
contacts_to_send = min(5, wacom->num_contacts_left);
for (i = 0; i < contacts_to_send; i++) {
int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
bool touch = (data[offset] & 0x1) && !wacom->shared->stylus_in_proximity;
int id = get_unaligned_le16(&data[offset + 1]);
int slot = input_mt_get_slot_by_key(input, id);
if (slot < 0)
continue;
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = get_unaligned_le16(&data[offset + x_offset + 7]);
int y = get_unaligned_le16(&data[offset + x_offset + 9]);
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
}
input_mt_sync_frame(input);
wacom->num_contacts_left -= contacts_to_send;
if (wacom->num_contacts_left <= 0) {
wacom->num_contacts_left = 0;
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
}
return 1;
}
static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned char *data = wacom->data;
int i;
for (i = 0; i < 2; i++) {
int p = data[1] & (1 << i);
bool touch = p && !wacom->shared->stylus_in_proximity;
input_mt_slot(input, i);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
}
input_mt_sync_frame(input);
/* keep touch state for pen event */
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
return 1;
}
static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->touch_input;
bool prox = !wacom->shared->stylus_in_proximity;
int x = 0, y = 0;
if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG)
return 0;
if (len == WACOM_PKGLEN_TPC1FG) {
prox = prox && (data[0] & 0x01);
x = get_unaligned_le16(&data[1]);
y = get_unaligned_le16(&data[3]);
} else if (len == WACOM_PKGLEN_TPC1FG_B) {
prox = prox && (data[2] & 0x01);
x = get_unaligned_le16(&data[3]);
y = get_unaligned_le16(&data[5]);
} else {
prox = prox && (data[1] & 0x01);
x = le16_to_cpup((__le16 *)&data[2]);
y = le16_to_cpup((__le16 *)&data[4]);
}
if (prox) {
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
}
input_report_key(input, BTN_TOUCH, prox);
/* keep touch state for pen events */
wacom->shared->touch_down = prox;
return 1;
}
static int wacom_tpc_pen(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
bool prox = data[1] & 0x20;
if (!wacom->shared->stylus_in_proximity) /* first in prox */
/* Going into proximity select tool */
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
/* keep pen state for touch events */
wacom->shared->stylus_in_proximity = prox;
/* send pen events only when touch is up or forced out */
if (!wacom->shared->touch_down) {
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x07) << 8) | data[6]);
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
input_report_key(input, wacom->tool[0], prox);
return 1;
}
return 0;
}
static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
if (wacom->pen_input)
dev_dbg(wacom->pen_input->dev.parent,
"%s: received report #%d\n", __func__, data[0]);
else if (wacom->touch_input)
dev_dbg(wacom->touch_input->dev.parent,
"%s: received report #%d\n", __func__, data[0]);
switch (len) {
case WACOM_PKGLEN_TPC1FG:
return wacom_tpc_single_touch(wacom, len);
case WACOM_PKGLEN_TPC2FG:
return wacom_tpc_mt_touch(wacom);
case WACOM_PKGLEN_PENABLED:
return wacom_tpc_pen(wacom);
default:
switch (data[0]) {
case WACOM_REPORT_TPC1FG:
case WACOM_REPORT_TPCHID:
case WACOM_REPORT_TPCST:
case WACOM_REPORT_TPC1FGE:
return wacom_tpc_single_touch(wacom, len);
case WACOM_REPORT_TPCMT:
case WACOM_REPORT_TPCMT2:
return wacom_mt_touch(wacom);
case WACOM_REPORT_PENABLED:
return wacom_tpc_pen(wacom);
}
}
return 0;
}
static void wacom_map_usage(struct input_dev *input, struct hid_usage *usage,
struct hid_field *field, __u8 type, __u16 code, int fuzz)
{
int fmin = field->logical_minimum;
int fmax = field->logical_maximum;
usage->type = type;
usage->code = code;
set_bit(type, input->evbit);
switch (type) {
case EV_ABS:
input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
input_abs_set_res(input, code,
hidinput_calc_abs_res(field, code));
break;
case EV_KEY:
input_set_capability(input, EV_KEY, code);
break;
case EV_MSC:
input_set_capability(input, EV_MSC, code);
break;
}
}
static void wacom_wac_pen_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->pen_input;
switch (usage->hid) {
case HID_GD_X:
wacom_map_usage(input, usage, field, EV_ABS, ABS_X, 4);
break;
case HID_GD_Y:
wacom_map_usage(input, usage, field, EV_ABS, ABS_Y, 4);
break;
case HID_DG_TIPPRESSURE:
wacom_map_usage(input, usage, field, EV_ABS, ABS_PRESSURE, 0);
break;
case HID_DG_INRANGE:
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOOL_PEN, 0);
break;
case HID_DG_INVERT:
wacom_map_usage(input, usage, field, EV_KEY,
BTN_TOOL_RUBBER, 0);
break;
case HID_DG_ERASER:
case HID_DG_TIPSWITCH:
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOUCH, 0);
break;
case HID_DG_BARRELSWITCH:
wacom_map_usage(input, usage, field, EV_KEY, BTN_STYLUS, 0);
break;
case HID_DG_BARRELSWITCH2:
wacom_map_usage(input, usage, field, EV_KEY, BTN_STYLUS2, 0);
break;
case HID_DG_TOOLSERIALNUMBER:
wacom_map_usage(input, usage, field, EV_MSC, MSC_SERIAL, 0);
break;
}
}
static int wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->pen_input;
/* checking which Tool / tip switch to send */
switch (usage->hid) {
case HID_DG_INRANGE:
wacom_wac->hid_data.inrange_state = value;
return 0;
case HID_DG_INVERT:
wacom_wac->hid_data.invert_state = value;
return 0;
case HID_DG_ERASER:
case HID_DG_TIPSWITCH:
wacom_wac->hid_data.tipswitch |= value;
return 0;
}
/* send pen events only when touch is up or forced out */
if (!usage->type || wacom_wac->shared->touch_down)
return 0;
input_event(input, usage->type, usage->code, value);
return 0;
}
static void wacom_wac_pen_pre_report(struct hid_device *hdev,
struct hid_report *report)
{
return;
}
static void wacom_wac_pen_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->pen_input;
bool prox = wacom_wac->hid_data.inrange_state;
if (!wacom_wac->shared->stylus_in_proximity) /* first in prox */
/* Going into proximity select tool */
wacom_wac->tool[0] = wacom_wac->hid_data.invert_state ?
BTN_TOOL_RUBBER : BTN_TOOL_PEN;
/* keep pen state for touch events */
wacom_wac->shared->stylus_in_proximity = prox;
/* send pen events only when touch is up or forced out */
if (!wacom_wac->shared->touch_down) {
input_report_key(input, BTN_TOUCH,
wacom_wac->hid_data.tipswitch);
input_report_key(input, wacom_wac->tool[0], prox);
wacom_wac->hid_data.tipswitch = false;
input_sync(input);
}
}
static void wacom_wac_finger_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
struct input_dev *input = wacom_wac->touch_input;
unsigned touch_max = wacom_wac->features.touch_max;
switch (usage->hid) {
case HID_GD_X:
features->last_slot_field = usage->hid;
if (touch_max == 1)
wacom_map_usage(input, usage, field, EV_ABS, ABS_X, 4);
else
wacom_map_usage(input, usage, field, EV_ABS,
ABS_MT_POSITION_X, 4);
break;
case HID_GD_Y:
features->last_slot_field = usage->hid;
if (touch_max == 1)
wacom_map_usage(input, usage, field, EV_ABS, ABS_Y, 4);
else
wacom_map_usage(input, usage, field, EV_ABS,
ABS_MT_POSITION_Y, 4);
break;
case HID_DG_WIDTH:
case HID_DG_HEIGHT:
features->last_slot_field = usage->hid;
wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MAJOR, 0);
wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MINOR, 0);
input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
break;
case HID_DG_CONTACTID:
features->last_slot_field = usage->hid;
break;
case HID_DG_INRANGE:
features->last_slot_field = usage->hid;
break;
case HID_DG_INVERT:
features->last_slot_field = usage->hid;
break;
case HID_DG_TIPSWITCH:
features->last_slot_field = usage->hid;
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOUCH, 0);
break;
case HID_DG_CONTACTCOUNT:
wacom_wac->hid_data.cc_report = field->report->id;
wacom_wac->hid_data.cc_index = field->index;
wacom_wac->hid_data.cc_value_index = usage->usage_index;
break;
}
}
static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
struct input_dev *input)
{
struct hid_data *hid_data = &wacom_wac->hid_data;
bool mt = wacom_wac->features.touch_max > 1;
bool prox = hid_data->tipswitch &&
!wacom_wac->shared->stylus_in_proximity;
wacom_wac->hid_data.num_received++;
if (wacom_wac->hid_data.num_received > wacom_wac->hid_data.num_expected)
return;
if (mt) {
int slot;
slot = input_mt_get_slot_by_key(input, hid_data->id);
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, prox);
}
else {
input_report_key(input, BTN_TOUCH, prox);
}
if (prox) {
input_report_abs(input, mt ? ABS_MT_POSITION_X : ABS_X,
hid_data->x);
input_report_abs(input, mt ? ABS_MT_POSITION_Y : ABS_Y,
hid_data->y);
if (test_bit(ABS_MT_TOUCH_MAJOR, input->absbit)) {
input_report_abs(input, ABS_MT_TOUCH_MAJOR, max(hid_data->width, hid_data->height));
input_report_abs(input, ABS_MT_TOUCH_MINOR, min(hid_data->width, hid_data->height));
if (hid_data->width != hid_data->height)
input_report_abs(input, ABS_MT_ORIENTATION, hid_data->width <= hid_data->height ? 0 : 1);
}
}
}
static int wacom_wac_finger_event(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
switch (usage->hid) {
case HID_GD_X:
wacom_wac->hid_data.x = value;
break;
case HID_GD_Y:
wacom_wac->hid_data.y = value;
break;
case HID_DG_WIDTH:
wacom_wac->hid_data.width = value;
break;
case HID_DG_HEIGHT:
wacom_wac->hid_data.height = value;
break;
case HID_DG_CONTACTID:
wacom_wac->hid_data.id = value;
break;
case HID_DG_TIPSWITCH:
wacom_wac->hid_data.tipswitch = value;
break;
}
if (usage->usage_index + 1 == field->report_count) {
if (usage->hid == wacom_wac->features.last_slot_field)
wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
}
return 0;
}
static void wacom_wac_finger_pre_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct hid_data* hid_data = &wacom_wac->hid_data;
if (hid_data->cc_report != 0 &&
hid_data->cc_report != report->id) {
int i;
hid_data->cc_report = report->id;
hid_data->cc_index = -1;
hid_data->cc_value_index = -1;
for (i = 0; i < report->maxfield; i++) {
struct hid_field *field = report->field[i];
int j;
for (j = 0; j < field->maxusage; j++) {
if (field->usage[j].hid == HID_DG_CONTACTCOUNT) {
hid_data->cc_index = i;
hid_data->cc_value_index = j;
/* break */
i = report->maxfield;
j = field->maxusage;
}
}
}
}
if (hid_data->cc_report != 0 &&
hid_data->cc_index >= 0) {
struct hid_field *field = report->field[hid_data->cc_index];
int value = field->value[hid_data->cc_value_index];
if (value)
hid_data->num_expected = value;
}
else {
hid_data->num_expected = wacom_wac->features.touch_max;
}
}
static void wacom_wac_finger_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->touch_input;
unsigned touch_max = wacom_wac->features.touch_max;
/* If more packets of data are expected, give us a chance to
* process them rather than immediately syncing a partial
* update.
*/
if (wacom_wac->hid_data.num_received < wacom_wac->hid_data.num_expected)
return;
if (touch_max > 1)
input_mt_sync_frame(input);
input_sync(input);
wacom_wac->hid_data.num_received = 0;
/* keep touch state for pen event */
wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);
}
void wacom_wac_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
/* currently, only direct devices have proper hid report descriptors */
__set_bit(INPUT_PROP_DIRECT, wacom_wac->pen_input->propbit);
__set_bit(INPUT_PROP_DIRECT, wacom_wac->touch_input->propbit);
if (WACOM_PEN_FIELD(field))
return wacom_wac_pen_usage_mapping(hdev, field, usage);
if (WACOM_FINGER_FIELD(field))
return wacom_wac_finger_usage_mapping(hdev, field, usage);
}
int wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
if (wacom->wacom_wac.features.type != HID_GENERIC)
return 0;
if (WACOM_PEN_FIELD(field))
return wacom_wac_pen_event(hdev, field, usage, value);
if (WACOM_FINGER_FIELD(field))
return wacom_wac_finger_event(hdev, field, usage, value);
return 0;
}
static void wacom_report_events(struct hid_device *hdev, struct hid_report *report)
{
int r;
for (r = 0; r < report->maxfield; r++) {
struct hid_field *field;
unsigned count, n;
field = report->field[r];
count = field->report_count;
if (!(HID_MAIN_ITEM_VARIABLE & field->flags))
continue;
for (n = 0; n < count; n++)
wacom_wac_event(hdev, field, &field->usage[n], field->value[n]);
}
}
void wacom_wac_report(struct hid_device *hdev, struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct hid_field *field = report->field[0];
if (wacom_wac->features.type != HID_GENERIC)
return;
if (WACOM_PEN_FIELD(field))
wacom_wac_pen_pre_report(hdev, report);
if (WACOM_FINGER_FIELD(field))
wacom_wac_finger_pre_report(hdev, report);
wacom_report_events(hdev, report);
if (WACOM_PEN_FIELD(field))
return wacom_wac_pen_report(hdev, report);
if (WACOM_FINGER_FIELD(field))
return wacom_wac_finger_report(hdev, report);
}
static int wacom_bpt_touch(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->touch_input;
struct input_dev *pad_input = wacom->pad_input;
unsigned char *data = wacom->data;
int i;
if (data[0] != 0x02)
return 0;
for (i = 0; i < 2; i++) {
int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
bool touch = data[offset + 3] & 0x80;
/*
* Touch events need to be disabled while stylus is
* in proximity because user's hand is resting on touchpad
* and sending unwanted events. User expects tablet buttons
* to continue working though.
*/
touch = touch && !wacom->shared->stylus_in_proximity;
input_mt_slot(input, i);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
x <<= 5;
y <<= 5;
}
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
}
input_mt_sync_frame(input);
input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0);
input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0);
input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0);
input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0);
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
return 1;
}
static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
{
struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->touch_input;
bool touch = data[1] & 0x80;
int slot = input_mt_get_slot_by_key(input, data[0]);
if (slot < 0)
return;
touch = touch && !wacom->shared->stylus_in_proximity;
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = (data[2] << 4) | (data[4] >> 4);
int y = (data[3] << 4) | (data[4] & 0x0f);
int width, height;
if (features->type >= INTUOSPS && features->type <= INTUOSHT2) {
width = data[5] * 100;
height = data[6] * 100;
} else {
/*
* "a" is a scaled-down area which we assume is
* roughly circular and which can be described as:
* a=(pi*r^2)/C.
*/
int a = data[5];
int x_res = input_abs_get_res(input, ABS_MT_POSITION_X);
int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y);
width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
height = width * y_res / x_res;
}
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
input_report_abs(input, ABS_MT_TOUCH_MAJOR, width);
input_report_abs(input, ABS_MT_TOUCH_MINOR, height);
}
}
static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
{
struct input_dev *input = wacom->pad_input;
struct wacom_features *features = &wacom->features;
if (features->type == INTUOSHT || features->type == INTUOSHT2) {
input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
} else {
input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
}
input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
}
static int wacom_bpt3_touch(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
int count = data[1] & 0x07;
int touch_changed = 0, i;
if (data[0] != 0x02)
return 0;
/* data has up to 7 fixed sized 8-byte messages starting at data[2] */
for (i = 0; i < count; i++) {
int offset = (8 * i) + 2;
int msg_id = data[offset];
if (msg_id >= 2 && msg_id <= 17) {
wacom_bpt3_touch_msg(wacom, data + offset);
touch_changed++;
} else if (msg_id == 128)
wacom_bpt3_button_msg(wacom, data + offset);
}
/* only update touch if we actually have a touchpad and touch data changed */
if (wacom->touch_input && touch_changed) {
input_mt_sync_frame(wacom->touch_input);
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
}
return 1;
}
static int wacom_bpt_pen(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->pen_input;
unsigned char *data = wacom->data;
int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
if (data[0] != WACOM_REPORT_PENABLED)
return 0;
prox = (data[1] & 0x20) == 0x20;
/*
* All reports shared between PEN and RUBBER tool must be
* forced to a known starting value (zero) when transitioning to
* out-of-prox.
*
* If not reset then, to userspace, it will look like lost events
* if new tool comes in-prox with same values as previous tool sent.
*
* Hardware does report zero in most out-of-prox cases but not all.
*/
if (!wacom->shared->stylus_in_proximity) {
if (data[1] & 0x08) {
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
} else {
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
}
}
wacom->shared->stylus_in_proximity = prox;
if (wacom->shared->touch_down)
return 0;
if (prox) {
x = le16_to_cpup((__le16 *)&data[2]);
y = le16_to_cpup((__le16 *)&data[4]);
p = le16_to_cpup((__le16 *)&data[6]);
/*
* Convert distance from out prox to distance from tablet.
* distance will be greater than distance_max once
* touching and applying pressure; do not report negative
* distance.
*/
if (data[8] <= features->distance_max)
d = features->distance_max - data[8];
pen = data[1] & 0x01;
btn1 = data[1] & 0x02;
btn2 = data[1] & 0x04;
} else {
wacom->id[0] = 0;
}
input_report_key(input, BTN_TOUCH, pen);
input_report_key(input, BTN_STYLUS, btn1);
input_report_key(input, BTN_STYLUS2, btn2);
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
input_report_abs(input, ABS_PRESSURE, p);
input_report_abs(input, ABS_DISTANCE, d);
input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */
input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */
return 1;
}
static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
{
struct wacom_features *features = &wacom->features;
if ((features->type == INTUOSHT2) &&
(features->device_type & WACOM_DEVICETYPE_PEN))
return wacom_intuos_irq(wacom);
else if (len == WACOM_PKGLEN_BBTOUCH)
return wacom_bpt_touch(wacom);
else if (len == WACOM_PKGLEN_BBTOUCH3)
return wacom_bpt3_touch(wacom);
else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN)
return wacom_bpt_pen(wacom);
return 0;
}
static void wacom_bamboo_pad_pen_event(struct wacom_wac *wacom,
unsigned char *data)
{
unsigned char prefix;
/*
* We need to reroute the event from the debug interface to the
* pen interface.
* We need to add the report ID to the actual pen report, so we
* temporary overwrite the first byte to prevent having to kzalloc/kfree
* and memcpy the report.
*/
prefix = data[0];
data[0] = WACOM_REPORT_BPAD_PEN;
/*
* actually reroute the event.
* No need to check if wacom->shared->pen is valid, hid_input_report()
* will check for us.
*/
hid_input_report(wacom->shared->pen, HID_INPUT_REPORT, data,
WACOM_PKGLEN_PENABLED, 1);
data[0] = prefix;
}
static int wacom_bamboo_pad_touch_event(struct wacom_wac *wacom,
unsigned char *data)
{
struct input_dev *input = wacom->touch_input;
unsigned char *finger_data, prefix;
unsigned id;
int x, y;
bool valid;
prefix = data[0];
for (id = 0; id < wacom->features.touch_max; id++) {
valid = !!(prefix & BIT(id)) &&
!wacom->shared->stylus_in_proximity;
input_mt_slot(input, id);
input_mt_report_slot_state(input, MT_TOOL_FINGER, valid);
if (!valid)
continue;
finger_data = data + 1 + id * 3;
x = finger_data[0] | ((finger_data[1] & 0x0f) << 8);
y = (finger_data[2] << 4) | (finger_data[1] >> 4);
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
input_mt_sync_frame(input);
input_report_key(input, BTN_LEFT, prefix & 0x40);
input_report_key(input, BTN_RIGHT, prefix & 0x80);
/* keep touch state for pen event */
wacom->shared->touch_down = !!prefix &&
!wacom->shared->stylus_in_proximity;
return 1;
}
static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
if (!((len == WACOM_PKGLEN_BPAD_TOUCH) ||
(len == WACOM_PKGLEN_BPAD_TOUCH_USB)) ||
(data[0] != WACOM_REPORT_BPAD_TOUCH))
return 0;
if (data[1] & 0x01)
wacom_bamboo_pad_pen_event(wacom, &data[1]);
if (data[1] & 0x02)
return wacom_bamboo_pad_touch_event(wacom, &data[9]);
return 0;
}
static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
int connected;
if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL)
return 0;
connected = data[1] & 0x01;
if (connected) {
int pid, battery, charging;
if ((wacom->shared->type == INTUOSHT ||
wacom->shared->type == INTUOSHT2) &&
wacom->shared->touch_input &&
wacom->shared->touch_max) {
input_report_switch(wacom->shared->touch_input,
SW_MUTE_DEVICE, data[5] & 0x40);
input_sync(wacom->shared->touch_input);
}
pid = get_unaligned_be16(&data[6]);
battery = (data[5] & 0x3f) * 100 / 31;
charging = !!(data[5] & 0x80);
if (wacom->pid != pid) {
wacom->pid = pid;
wacom_schedule_work(wacom, WACOM_WORKER_WIRELESS);
}
wacom_notify_battery(wacom, battery, charging, 1, 0);
} else if (wacom->pid != 0) {
/* disconnected while previously connected */
wacom->pid = 0;
wacom_schedule_work(wacom, WACOM_WORKER_WIRELESS);
wacom_notify_battery(wacom, 0, 0, 0, 0);
}
return 0;
}
static int wacom_status_irq(struct wacom_wac *wacom_wac, size_t len)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
struct wacom_features *features = &wacom_wac->features;
unsigned char *data = wacom_wac->data;
if (data[0] != WACOM_REPORT_USB)
return 0;
if ((features->type == INTUOSHT ||
features->type == INTUOSHT2) &&
wacom_wac->shared->touch_input &&
features->touch_max) {
input_report_switch(wacom_wac->shared->touch_input,
SW_MUTE_DEVICE, data[8] & 0x40);
input_sync(wacom_wac->shared->touch_input);
}
if (data[9] & 0x02) { /* wireless module is attached */
int battery = (data[8] & 0x3f) * 100 / 31;
bool charging = !!(data[8] & 0x80);
wacom_notify_battery(wacom_wac, battery, charging,
battery || charging, 1);
if (!wacom->battery.battery &&
!(features->quirks & WACOM_QUIRK_BATTERY)) {
features->quirks |= WACOM_QUIRK_BATTERY;
wacom_schedule_work(wacom_wac, WACOM_WORKER_BATTERY);
}
}
else if ((features->quirks & WACOM_QUIRK_BATTERY) &&
wacom->battery.battery) {
features->quirks &= ~WACOM_QUIRK_BATTERY;
wacom_schedule_work(wacom_wac, WACOM_WORKER_BATTERY);
wacom_notify_battery(wacom_wac, 0, 0, 0, 0);
}
return 0;
}
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
{
bool sync;
switch (wacom_wac->features.type) {
case PENPARTNER:
sync = wacom_penpartner_irq(wacom_wac);
break;
case PL:
sync = wacom_pl_irq(wacom_wac);
break;
case WACOM_G4:
case GRAPHIRE:
case GRAPHIRE_BT:
case WACOM_MO:
sync = wacom_graphire_irq(wacom_wac);
break;
case PTU:
sync = wacom_ptu_irq(wacom_wac);
break;
case DTU:
sync = wacom_dtu_irq(wacom_wac);
break;
case DTUS:
case DTUSX:
sync = wacom_dtus_irq(wacom_wac);
break;
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case INTUOS4S:
case INTUOS4:
case INTUOS4L:
case CINTIQ:
case WACOM_BEE:
case WACOM_13HD:
case WACOM_21UX2:
case WACOM_22HD:
case WACOM_24HD:
case WACOM_27QHD:
case DTK:
case CINTIQ_HYBRID:
case CINTIQ_COMPANION_2:
sync = wacom_intuos_irq(wacom_wac);
break;
case INTUOS4WL:
sync = wacom_intuos_bt_irq(wacom_wac, len);
break;
case WACOM_24HDT:
case WACOM_27QHDT:
sync = wacom_24hdt_irq(wacom_wac);
break;
case INTUOS5S:
case INTUOS5:
case INTUOS5L:
case INTUOSPS:
case INTUOSPM:
case INTUOSPL:
if (len == WACOM_PKGLEN_BBTOUCH3)
sync = wacom_bpt3_touch(wacom_wac);
else if (wacom_wac->data[0] == WACOM_REPORT_USB)
sync = wacom_status_irq(wacom_wac, len);
else
sync = wacom_intuos_irq(wacom_wac);
break;
case TABLETPC:
case TABLETPCE:
case TABLETPC2FG:
case MTSCREEN:
case MTTPC:
case MTTPC_B:
sync = wacom_tpc_irq(wacom_wac, len);
break;
case BAMBOO_PT:
case BAMBOO_PEN:
case BAMBOO_TOUCH:
case INTUOSHT:
case INTUOSHT2:
if (wacom_wac->data[0] == WACOM_REPORT_USB)
sync = wacom_status_irq(wacom_wac, len);
else
sync = wacom_bpt_irq(wacom_wac, len);
break;
case BAMBOO_PAD:
sync = wacom_bamboo_pad_irq(wacom_wac, len);
break;
case WIRELESS:
sync = wacom_wireless_irq(wacom_wac, len);
break;
case REMOTE:
sync = false;
if (wacom_wac->data[0] == WACOM_REPORT_DEVICE_LIST)
wacom_remote_status_irq(wacom_wac, len);
else
sync = wacom_remote_irq(wacom_wac, len);
break;
default:
sync = false;
break;
}
if (sync) {
if (wacom_wac->pen_input)
input_sync(wacom_wac->pen_input);
if (wacom_wac->touch_input)
input_sync(wacom_wac->touch_input);
if (wacom_wac->pad_input)
input_sync(wacom_wac->pad_input);
}
}
static void wacom_setup_basic_pro_pen(struct wacom_wac *wacom_wac)
{
struct input_dev *input_dev = wacom_wac->pen_input;
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
input_set_abs_params(input_dev, ABS_DISTANCE,
0, wacom_wac->features.distance_max, wacom_wac->features.distance_fuzz, 0);
}
static void wacom_setup_cintiq(struct wacom_wac *wacom_wac)
{
struct input_dev *input_dev = wacom_wac->pen_input;
struct wacom_features *features = &wacom_wac->features;
wacom_setup_basic_pro_pen(wacom_wac);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_BRUSH, input_dev->keybit);
__set_bit(BTN_TOOL_PENCIL, input_dev->keybit);
__set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_X, -64, 63, features->tilt_fuzz, 0);
input_abs_set_res(input_dev, ABS_TILT_X, 57);
input_set_abs_params(input_dev, ABS_TILT_Y, -64, 63, features->tilt_fuzz, 0);
input_abs_set_res(input_dev, ABS_TILT_Y, 57);
}
static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
{
struct input_dev *input_dev = wacom_wac->pen_input;
input_set_capability(input_dev, EV_REL, REL_WHEEL);
wacom_setup_cintiq(wacom_wac);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
__set_bit(BTN_MIDDLE, input_dev->keybit);
__set_bit(BTN_SIDE, input_dev->keybit);
__set_bit(BTN_EXTRA, input_dev->keybit);
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_TOOL_LENS, input_dev->keybit);
input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_RZ, 287);
input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
}
void wacom_setup_device_quirks(struct wacom *wacom)
{
struct wacom_features *features = &wacom->wacom_wac.features;
/* The pen and pad share the same interface on most devices */
if (features->type == GRAPHIRE_BT || features->type == WACOM_G4 ||
features->type == DTUS ||
(features->type >= INTUOS3S && features->type <= WACOM_MO)) {
if (features->device_type & WACOM_DEVICETYPE_PEN)
features->device_type |= WACOM_DEVICETYPE_PAD;
}
/* touch device found but size is not defined. use default */
if (features->device_type & WACOM_DEVICETYPE_TOUCH && !features->x_max) {
features->x_max = 1023;
features->y_max = 1023;
}
/*
* Intuos5/Pro and Bamboo 3rd gen have no useful data about its
* touch interface in its HID descriptor. If this is the touch
* interface (PacketSize of WACOM_PKGLEN_BBTOUCH3), override the
* tablet values.
*/
if ((features->type >= INTUOS5S && features->type <= INTUOSPL) ||
(features->type >= INTUOSHT && features->type <= BAMBOO_PT)) {
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
if (features->touch_max)
features->device_type |= WACOM_DEVICETYPE_TOUCH;
if (features->type >= INTUOSHT && features->type <= BAMBOO_PT)
features->device_type |= WACOM_DEVICETYPE_PAD;
features->x_max = 4096;
features->y_max = 4096;
}
else if (features->pktlen == WACOM_PKGLEN_BBTOUCH) {
features->device_type |= WACOM_DEVICETYPE_PAD;
}
}
/*
* Hack for the Bamboo One:
* the device presents a PAD/Touch interface as most Bamboos and even
* sends ghosts PAD data on it. However, later, we must disable this
* ghost interface, and we can not detect it unless we set it here
* to WACOM_DEVICETYPE_PAD or WACOM_DEVICETYPE_TOUCH.
*/
if (features->type == BAMBOO_PEN &&
features->pktlen == WACOM_PKGLEN_BBTOUCH3)
features->device_type |= WACOM_DEVICETYPE_PAD;
/*
* Raw Wacom-mode pen and touch events both come from interface
* 0, whose HID descriptor has an application usage of 0xFF0D
* (i.e., WACOM_VENDORDEFINED_PEN). We route pen packets back
* out through the HID_GENERIC device created for interface 1,
* so rewrite this one to be of type WACOM_DEVICETYPE_TOUCH.
*/
if (features->type == BAMBOO_PAD)
features->device_type = WACOM_DEVICETYPE_TOUCH;
if (features->type == REMOTE)
features->device_type = WACOM_DEVICETYPE_PAD;
if (wacom->hdev->bus == BUS_BLUETOOTH)
features->quirks |= WACOM_QUIRK_BATTERY;
/* quirk for bamboo touch with 2 low res touches */
if ((features->type == BAMBOO_PT || features->type == BAMBOO_TOUCH) &&
features->pktlen == WACOM_PKGLEN_BBTOUCH) {
features->x_max <<= 5;
features->y_max <<= 5;
features->x_fuzz <<= 5;
features->y_fuzz <<= 5;
features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
}
if (features->type == WIRELESS) {
if (features->device_type == WACOM_DEVICETYPE_WL_MONITOR) {
features->quirks |= WACOM_QUIRK_BATTERY;
}
}
if (features->type == REMOTE)
features->device_type |= WACOM_DEVICETYPE_WL_MONITOR;
}
int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
if (!(features->device_type & WACOM_DEVICETYPE_PEN))
return -ENODEV;
if (features->type == HID_GENERIC)
/* setup has already been done */
return 0;
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(ABS_MISC, input_dev->absbit);
input_set_abs_params(input_dev, ABS_X, features->x_min,
features->x_max, features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_Y, features->y_min,
features->y_max, features->y_fuzz, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0,
features->pressure_max, features->pressure_fuzz, 0);
/* penabled devices have fixed resolution for each model */
input_abs_set_res(input_dev, ABS_X, features->x_resolution);
input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
switch (features->type) {
case GRAPHIRE_BT:
__clear_bit(ABS_MISC, input_dev->absbit);
case WACOM_MO:
case WACOM_G4:
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
features->distance_max,
features->distance_fuzz, 0);
/* fall through */
case GRAPHIRE:
input_set_capability(input_dev, EV_REL, REL_WHEEL);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
__set_bit(BTN_MIDDLE, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case WACOM_27QHD:
case WACOM_24HD:
case DTK:
case WACOM_22HD:
case WACOM_21UX2:
case WACOM_BEE:
case CINTIQ:
case WACOM_13HD:
case CINTIQ_HYBRID:
case CINTIQ_COMPANION_2:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
wacom_setup_cintiq(wacom_wac);
break;
case INTUOS3:
case INTUOS3L:
case INTUOS3S:
case INTUOS4:
case INTUOS4WL:
case INTUOS4L:
case INTUOS4S:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
/* fall through */
case INTUOS:
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
wacom_setup_intuos(wacom_wac);
break;
case INTUOS5:
case INTUOS5L:
case INTUOSPM:
case INTUOSPL:
case INTUOS5S:
case INTUOSPS:
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
features->distance_max,
features->distance_fuzz, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
wacom_setup_intuos(wacom_wac);
break;
case WACOM_24HDT:
case WACOM_27QHDT:
case MTSCREEN:
case MTTPC:
case MTTPC_B:
case TABLETPC2FG:
case TABLETPC:
case TABLETPCE:
__clear_bit(ABS_MISC, input_dev->absbit);
/* fall through */
case DTUS:
case DTUSX:
case PL:
case DTU:
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
break;
case PTU:
__set_bit(BTN_STYLUS2, input_dev->keybit);
/* fall through */
case PENPARTNER:
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case INTUOSHT:
case BAMBOO_PT:
case BAMBOO_PEN:
case INTUOSHT2:
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (features->type == INTUOSHT2) {
wacom_setup_basic_pro_pen(wacom_wac);
} else {
__clear_bit(ABS_MISC, input_dev->absbit);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
features->distance_max,
features->distance_fuzz, 0);
}
break;
case BAMBOO_PAD:
__clear_bit(ABS_MISC, input_dev->absbit);
break;
}
return 0;
}
int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
return -ENODEV;
if (features->type == HID_GENERIC)
/* setup has already been done */
return 0;
__set_bit(BTN_TOUCH, input_dev->keybit);
if (features->touch_max == 1) {
input_set_abs_params(input_dev, ABS_X, 0,
features->x_max, features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_X,
features->x_resolution);
input_abs_set_res(input_dev, ABS_Y,
features->y_resolution);
}
else if (features->touch_max > 1) {
input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
features->x_max, features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
features->x_resolution);
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
features->y_resolution);
}
switch (features->type) {
case INTUOS5:
case INTUOS5L:
case INTUOSPM:
case INTUOSPL:
case INTUOS5S:
case INTUOSPS:
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, features->y_max, 0, 0);
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
break;
case WACOM_24HDT:
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
/* fall through */
case WACOM_27QHDT:
case MTSCREEN:
case MTTPC:
case MTTPC_B:
case TABLETPC2FG:
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT);
/*fall through */
case TABLETPC:
case TABLETPCE:
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
break;
case INTUOSHT:
case INTUOSHT2:
input_dev->evbit[0] |= BIT_MASK(EV_SW);
__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
/* fall through */
case BAMBOO_PT:
case BAMBOO_TOUCH:
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MAJOR,
0, features->x_max, 0, 0);
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MINOR,
0, features->y_max, 0, 0);
}
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
break;
case BAMBOO_PAD:
input_mt_init_slots(input_dev, features->touch_max,
INPUT_MT_POINTER);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
break;
}
return 0;
}
static void wacom_setup_numbered_buttons(struct input_dev *input_dev,
int button_count)
{
int i;
for (i = 0; i < button_count && i < 10; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
for (i = 10; i < button_count && i < 16; i++)
__set_bit(BTN_A + (i-10), input_dev->keybit);
for (i = 16; i < button_count && i < 18; i++)
__set_bit(BTN_BASE + (i-16), input_dev->keybit);
}
static void wacom_report_numbered_buttons(struct input_dev *input_dev,
int button_count, int mask)
{
int i;
for (i = 0; i < button_count && i < 10; i++)
input_report_key(input_dev, BTN_0 + i, mask & (1 << i));
for (i = 10; i < button_count && i < 16; i++)
input_report_key(input_dev, BTN_A + (i-10), mask & (1 << i));
for (i = 16; i < button_count && i < 18; i++)
input_report_key(input_dev, BTN_BASE + (i-16), mask & (1 << i));
}
int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
if (!(features->device_type & WACOM_DEVICETYPE_PAD))
return -ENODEV;
if (features->type == REMOTE && input_dev == wacom_wac->pad_input)
return -ENODEV;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
/* kept for making legacy xf86-input-wacom working with the wheels */
__set_bit(ABS_MISC, input_dev->absbit);
/* kept for making legacy xf86-input-wacom accepting the pad */
input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0);
/* kept for making udev and libwacom accepting the pad */
__set_bit(BTN_STYLUS, input_dev->keybit);
wacom_setup_numbered_buttons(input_dev, features->numbered_buttons);
switch (features->type) {
case CINTIQ_HYBRID:
case CINTIQ_COMPANION_2:
case DTK:
case DTUS:
case GRAPHIRE_BT:
break;
case WACOM_MO:
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case WACOM_G4:
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
input_set_capability(input_dev, EV_REL, REL_WHEEL);
break;
case WACOM_24HD:
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
break;
case WACOM_27QHD:
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
input_set_abs_params(input_dev, ABS_X, -2048, 2048, 0, 0);
input_abs_set_res(input_dev, ABS_X, 1024); /* points/g */
input_set_abs_params(input_dev, ABS_Y, -2048, 2048, 0, 0);
input_abs_set_res(input_dev, ABS_Y, 1024);
input_set_abs_params(input_dev, ABS_Z, -2048, 2048, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 1024);
__set_bit(INPUT_PROP_ACCELEROMETER, input_dev->propbit);
break;
case WACOM_22HD:
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
/* fall through */
case WACOM_21UX2:
case WACOM_BEE:
case CINTIQ:
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
break;
case WACOM_13HD:
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case INTUOS3:
case INTUOS3L:
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
/* fall through */
case INTUOS3S:
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
break;
case INTUOS5:
case INTUOS5L:
case INTUOSPM:
case INTUOSPL:
case INTUOS5S:
case INTUOSPS:
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case INTUOS4WL:
/*
* For Bluetooth devices, the udev rule does not work correctly
* for pads unless we add a stylus capability, which forces
* ID_INPUT_TABLET to be set.
*/
__set_bit(BTN_STYLUS, input_dev->keybit);
/* fall through */
case INTUOS4:
case INTUOS4L:
case INTUOS4S:
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case INTUOSHT:
case BAMBOO_PT:
case BAMBOO_TOUCH:
case INTUOSHT2:
__clear_bit(ABS_MISC, input_dev->absbit);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
break;
case REMOTE:
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
default:
/* no pad supported */
return -ENODEV;
}
return 0;
}
static const struct wacom_features wacom_features_0x00 =
{ "Wacom Penpartner", 5040, 3780, 255, 0,
PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
static const struct wacom_features wacom_features_0x10 =
{ "Wacom Graphire", 10206, 7422, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x81 =
{ "Wacom Graphire BT", 16704, 12064, 511, 32,
GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES, 2 };
static const struct wacom_features wacom_features_0x11 =
{ "Wacom Graphire2 4x5", 10206, 7422, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x12 =
{ "Wacom Graphire2 5x7", 13918, 10206, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x13 =
{ "Wacom Graphire3", 10208, 7424, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x14 =
{ "Wacom Graphire3 6x8", 16704, 12064, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x15 =
{ "Wacom Graphire4 4x5", 10208, 7424, 511, 63,
WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x16 =
{ "Wacom Graphire4 6x8", 16704, 12064, 511, 63,
WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x17 =
{ "Wacom BambooFun 4x5", 14760, 9225, 511, 63,
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x18 =
{ "Wacom BambooFun 6x8", 21648, 13530, 511, 63,
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x19 =
{ "Wacom Bamboo1 Medium", 16704, 12064, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x60 =
{ "Wacom Volito", 5104, 3712, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x61 =
{ "Wacom PenStation2", 3250, 2320, 255, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x62 =
{ "Wacom Volito2 4x5", 5104, 3712, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x63 =
{ "Wacom Volito2 2x3", 3248, 2320, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x64 =
{ "Wacom PenPartner2", 3250, 2320, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x65 =
{ "Wacom Bamboo", 14760, 9225, 511, 63,
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x69 =
{ "Wacom Bamboo1", 5104, 3712, 511, 63,
GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
static const struct wacom_features wacom_features_0x6A =
{ "Wacom Bamboo1 4x6", 14760, 9225, 1023, 63,
GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x6B =
{ "Wacom Bamboo1 5x8", 21648, 13530, 1023, 63,
GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x20 =
{ "Wacom Intuos 4x5", 12700, 10600, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x21 =
{ "Wacom Intuos 6x8", 20320, 16240, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x22 =
{ "Wacom Intuos 9x12", 30480, 24060, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x23 =
{ "Wacom Intuos 12x12", 30480, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x24 =
{ "Wacom Intuos 12x18", 45720, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x30 =
{ "Wacom PL400", 5408, 4056, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x31 =
{ "Wacom PL500", 6144, 4608, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x32 =
{ "Wacom PL600", 6126, 4604, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x33 =
{ "Wacom PL600SX", 6260, 5016, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x34 =
{ "Wacom PL550", 6144, 4608, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x35 =
{ "Wacom PL800", 7220, 5780, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x37 =
{ "Wacom PL700", 6758, 5406, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x38 =
{ "Wacom PL510", 6282, 4762, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x39 =
{ "Wacom DTU710", 34080, 27660, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0xC4 =
{ "Wacom DTF521", 6282, 4762, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0xC0 =
{ "Wacom DTF720", 6858, 5506, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0xC2 =
{ "Wacom DTF720a", 6858, 5506, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x03 =
{ "Wacom Cintiq Partner", 20480, 15360, 511, 0,
PTU, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x41 =
{ "Wacom Intuos2 4x5", 12700, 10600, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x42 =
{ "Wacom Intuos2 6x8", 20320, 16240, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x43 =
{ "Wacom Intuos2 9x12", 30480, 24060, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x44 =
{ "Wacom Intuos2 12x12", 30480, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x45 =
{ "Wacom Intuos2 12x18", 45720, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xB0 =
{ "Wacom Intuos3 4x5", 25400, 20320, 1023, 63,
INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
static const struct wacom_features wacom_features_0xB1 =
{ "Wacom Intuos3 6x8", 40640, 30480, 1023, 63,
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB2 =
{ "Wacom Intuos3 9x12", 60960, 45720, 1023, 63,
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB3 =
{ "Wacom Intuos3 12x12", 60960, 60960, 1023, 63,
INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB4 =
{ "Wacom Intuos3 12x19", 97536, 60960, 1023, 63,
INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB5 =
{ "Wacom Intuos3 6x11", 54204, 31750, 1023, 63,
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB7 =
{ "Wacom Intuos3 4x6", 31496, 19685, 1023, 63,
INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
static const struct wacom_features wacom_features_0xB8 =
{ "Wacom Intuos4 4x6", 31496, 19685, 2047, 63,
INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
static const struct wacom_features wacom_features_0xB9 =
{ "Wacom Intuos4 6x9", 44704, 27940, 2047, 63,
INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBA =
{ "Wacom Intuos4 8x13", 65024, 40640, 2047, 63,
INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBB =
{ "Wacom Intuos4 12x19", 97536, 60960, 2047, 63,
INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBC =
{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBD =
{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
INTUOS4WL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0x26 =
{ "Wacom Intuos5 touch S", 31496, 19685, 2047, 63,
INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16 };
static const struct wacom_features wacom_features_0x27 =
{ "Wacom Intuos5 touch M", 44704, 27940, 2047, 63,
INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
static const struct wacom_features wacom_features_0x28 =
{ "Wacom Intuos5 touch L", 65024, 40640, 2047, 63,
INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
static const struct wacom_features wacom_features_0x29 =
{ "Wacom Intuos5 S", 31496, 19685, 2047, 63,
INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
static const struct wacom_features wacom_features_0x2A =
{ "Wacom Intuos5 M", 44704, 27940, 2047, 63,
INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0x314 =
{ "Wacom Intuos Pro S", 31496, 19685, 2047, 63,
INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x315 =
{ "Wacom Intuos Pro M", 44704, 27940, 2047, 63,
INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x317 =
{ "Wacom Intuos Pro L", 65024, 40640, 2047, 63,
INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xF4 =
{ "Wacom Cintiq 24HD", 104080, 65200, 2047, 63,
WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0xF8 =
{ "Wacom Cintiq 24HD touch", 104080, 65200, 2047, 63, /* Pen */
WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
static const struct wacom_features wacom_features_0xF6 =
{ "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x32A =
{ "Wacom Cintiq 27QHD", 119740, 67520, 2047, 63,
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x32B =
{ "Wacom Cintiq 27QHD touch", 119740, 67520, 2047, 63,
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32C };
static const struct wacom_features wacom_features_0x32C =
{ "Wacom Cintiq 27QHD touch", .type = WACOM_27QHDT,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32B, .touch_max = 10 };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", 87200, 65600, 1023, 63,
CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xC5 =
{ "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63,
WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
static const struct wacom_features wacom_features_0xC6 =
{ "Wacom Cintiq 12WX", 53020, 33440, 1023, 63,
WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
static const struct wacom_features wacom_features_0x304 =
{ "Wacom Cintiq 13HD", 59152, 33448, 1023, 63,
WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x333 =
{ "Wacom Cintiq 13HD touch", 59152, 33448, 2047, 63,
WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x335 };
static const struct wacom_features wacom_features_0x335 =
{ "Wacom Cintiq 13HD touch", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x333, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xC7 =
{ "Wacom DTU1931", 37832, 30305, 511, 0,
PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xCE =
{ "Wacom DTU2231", 47864, 27011, 511, 0,
DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE };
static const struct wacom_features wacom_features_0xF0 =
{ "Wacom DTU1631", 34623, 19553, 511, 0,
DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xFB =
{ "Wacom DTU1031", 21896, 13760, 511, 0,
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x32F =
{ "Wacom DTU1031X", 22472, 12728, 511, 0,
DTUSX, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 0,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x336 =
{ "Wacom DTU1141", 23472, 13203, 1023, 0,
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x57 =
{ "Wacom DTK2241", 95640, 54060, 2047, 63,
DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x59 = /* Pen */
{ "Wacom DTH2242", 95640, 54060, 2047, 63,
DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
static const struct wacom_features wacom_features_0x5D = /* Touch */
{ "Wacom DTH2242", .type = WACOM_24HDT,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xCC =
{ "Wacom Cintiq 21UX2", 86800, 65200, 2047, 63,
WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0xFA =
{ "Wacom Cintiq 22HD", 95440, 53860, 2047, 63,
WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x5B =
{ "Wacom Cintiq 22HDT", 95440, 53860, 2047, 63,
WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
static const struct wacom_features wacom_features_0x5E =
{ "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x90 =
{ "Wacom ISDv4 90", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x93 =
{ "Wacom ISDv4 93", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x97 =
{ "Wacom ISDv4 97", 26202, 16325, 511, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x9A =
{ "Wacom ISDv4 9A", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x9F =
{ "Wacom ISDv4 9F", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xE2 =
{ "Wacom ISDv4 E2", 26202, 16325, 255, 0,
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xE3 =
{ "Wacom ISDv4 E3", 26202, 16325, 255, 0,
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xE5 =
{ "Wacom ISDv4 E5", 26202, 16325, 255, 0,
MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xE6 =
{ "Wacom ISDv4 E6", 27760, 15694, 255, 0,
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xEC =
{ "Wacom ISDv4 EC", 25710, 14500, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xED =
{ "Wacom ISDv4 ED", 26202, 16325, 255, 0,
TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xEF =
{ "Wacom ISDv4 EF", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x100 =
{ "Wacom ISDv4 100", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x101 =
{ "Wacom ISDv4 101", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x10D =
{ "Wacom ISDv4 10D", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x10E =
{ "Wacom ISDv4 10E", 27760, 15694, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x10F =
{ "Wacom ISDv4 10F", 27760, 15694, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x116 =
{ "Wacom ISDv4 116", 26202, 16325, 255, 0,
TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x12C =
{ "Wacom ISDv4 12C", 27848, 15752, 2047, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4004 =
{ "Wacom ISDv4 4004", 11060, 6220, 255, 0,
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x5000 =
{ "Wacom ISDv4 5000", 27848, 15752, 1023, 0,
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x5002 =
{ "Wacom ISDv4 5002", 29576, 16724, 1023, 0,
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x47 =
{ "Wacom Intuos2 6x8", 20320, 16240, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x84 =
{ "Wacom Wireless Receiver", .type = WIRELESS, .touch_max = 16 };
static const struct wacom_features wacom_features_0xD0 =
{ "Wacom Bamboo 2FG", 14720, 9200, 1023, 31,
BAMBOO_TOUCH, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD1 =
{ "Wacom Bamboo 2FG 4x5", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD2 =
{ "Wacom Bamboo Craft", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD4 =
{ "Wacom Bamboo Pen", 14720, 9200, 1023, 31,
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD5 =
{ "Wacom Bamboo Pen 6x8", 21648, 13700, 1023, 31,
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD6 =
{ "Wacom BambooPT 2FG 4x5", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD7 =
{ "Wacom BambooPT 2FG Small", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD8 =
{ "Wacom Bamboo Comic 2FG", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xDA =
{ "Wacom Bamboo 2FG 4x5 SE", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xDB =
{ "Wacom Bamboo 2FG 6x8 SE", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xDD =
{ "Wacom Bamboo Connect", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xDE =
{ "Wacom Bamboo 16FG 4x5", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 };
static const struct wacom_features wacom_features_0xDF =
{ "Wacom Bamboo 16FG 6x8", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 };
static const struct wacom_features wacom_features_0x300 =
{ "Wacom Bamboo One S", 14720, 9225, 1023, 31,
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x301 =
{ "Wacom Bamboo One M", 21648, 13530, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x302 =
{ "Wacom Intuos PT S", 15200, 9500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x303 =
{ "Wacom Intuos PT M", 21600, 13500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x30E =
{ "Wacom Intuos S", 15200, 9500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x6004 =
{ "ISD-V4", 12800, 8000, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x307 =
{ "Wacom ISDv5 307", 59152, 33448, 2047, 63,
CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
static const struct wacom_features wacom_features_0x309 =
{ "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x30A =
{ "Wacom ISDv5 30A", 59152, 33448, 2047, 63,
CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30C };
static const struct wacom_features wacom_features_0x30C =
{ "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x318 =
{ "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
static const struct wacom_features wacom_features_0x319 =
{ "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
static const struct wacom_features wacom_features_0x325 =
{ "Wacom ISDv5 325", 59552, 33848, 2047, 63,
CINTIQ_COMPANION_2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 11,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x326 };
static const struct wacom_features wacom_features_0x326 = /* Touch */
{ "Wacom ISDv5 326", .type = HID_GENERIC, .oVid = USB_VENDOR_ID_WACOM,
.oPid = 0x325 };
static const struct wacom_features wacom_features_0x323 =
{ "Wacom Intuos P M", 21600, 13500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x331 =
{ "Wacom Express Key Remote", .type = REMOTE,
.numbered_buttons = 18, .check_for_hid_type = true,
.hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33B =
{ "Wacom Intuos S 2", 15200, 9500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33C =
{ "Wacom Intuos PT S 2", 15200, 9500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33D =
{ "Wacom Intuos P M 2", 21600, 13500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33E =
{ "Wacom Intuos PT M 2", 21600, 13500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x343 =
{ "Wacom DTK1651", 34616, 19559, 1023, 0,
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_HID_ANY_ID =
{ "Wacom HID", .type = HID_GENERIC };
#define USB_DEVICE_WACOM(prod) \
HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
.driver_data = (kernel_ulong_t)&wacom_features_##prod
#define BT_DEVICE_WACOM(prod) \
HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
.driver_data = (kernel_ulong_t)&wacom_features_##prod
#define I2C_DEVICE_WACOM(prod) \
HID_DEVICE(BUS_I2C, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
.driver_data = (kernel_ulong_t)&wacom_features_##prod
#define USB_DEVICE_LENOVO(prod) \
HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \
.driver_data = (kernel_ulong_t)&wacom_features_##prod
const struct hid_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0x00) },
{ USB_DEVICE_WACOM(0x03) },
{ USB_DEVICE_WACOM(0x10) },
{ USB_DEVICE_WACOM(0x11) },
{ USB_DEVICE_WACOM(0x12) },
{ USB_DEVICE_WACOM(0x13) },
{ USB_DEVICE_WACOM(0x14) },
{ USB_DEVICE_WACOM(0x15) },
{ USB_DEVICE_WACOM(0x16) },
{ USB_DEVICE_WACOM(0x17) },
{ USB_DEVICE_WACOM(0x18) },
{ USB_DEVICE_WACOM(0x19) },
{ USB_DEVICE_WACOM(0x20) },
{ USB_DEVICE_WACOM(0x21) },
{ USB_DEVICE_WACOM(0x22) },
{ USB_DEVICE_WACOM(0x23) },
{ USB_DEVICE_WACOM(0x24) },
{ USB_DEVICE_WACOM(0x26) },
{ USB_DEVICE_WACOM(0x27) },
{ USB_DEVICE_WACOM(0x28) },
{ USB_DEVICE_WACOM(0x29) },
{ USB_DEVICE_WACOM(0x2A) },
{ USB_DEVICE_WACOM(0x30) },
{ USB_DEVICE_WACOM(0x31) },
{ USB_DEVICE_WACOM(0x32) },
{ USB_DEVICE_WACOM(0x33) },
{ USB_DEVICE_WACOM(0x34) },
{ USB_DEVICE_WACOM(0x35) },
{ USB_DEVICE_WACOM(0x37) },
{ USB_DEVICE_WACOM(0x38) },
{ USB_DEVICE_WACOM(0x39) },
{ USB_DEVICE_WACOM(0x3F) },
{ USB_DEVICE_WACOM(0x41) },
{ USB_DEVICE_WACOM(0x42) },
{ USB_DEVICE_WACOM(0x43) },
{ USB_DEVICE_WACOM(0x44) },
{ USB_DEVICE_WACOM(0x45) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0x57) },
{ USB_DEVICE_WACOM(0x59) },
{ USB_DEVICE_WACOM(0x5B) },
{ USB_DEVICE_WACOM(0x5D) },
{ USB_DEVICE_WACOM(0x5E) },
{ USB_DEVICE_WACOM(0x60) },
{ USB_DEVICE_WACOM(0x61) },
{ USB_DEVICE_WACOM(0x62) },
{ USB_DEVICE_WACOM(0x63) },
{ USB_DEVICE_WACOM(0x64) },
{ USB_DEVICE_WACOM(0x65) },
{ USB_DEVICE_WACOM(0x69) },
{ USB_DEVICE_WACOM(0x6A) },
{ USB_DEVICE_WACOM(0x6B) },
{ BT_DEVICE_WACOM(0x81) },
{ USB_DEVICE_WACOM(0x84) },
{ USB_DEVICE_WACOM(0x90) },
{ USB_DEVICE_WACOM(0x93) },
{ USB_DEVICE_WACOM(0x97) },
{ USB_DEVICE_WACOM(0x9A) },
{ USB_DEVICE_WACOM(0x9F) },
{ USB_DEVICE_WACOM(0xB0) },
{ USB_DEVICE_WACOM(0xB1) },
{ USB_DEVICE_WACOM(0xB2) },
{ USB_DEVICE_WACOM(0xB3) },
{ USB_DEVICE_WACOM(0xB4) },
{ USB_DEVICE_WACOM(0xB5) },
{ USB_DEVICE_WACOM(0xB7) },
{ USB_DEVICE_WACOM(0xB8) },
{ USB_DEVICE_WACOM(0xB9) },
{ USB_DEVICE_WACOM(0xBA) },
{ USB_DEVICE_WACOM(0xBB) },
{ USB_DEVICE_WACOM(0xBC) },
{ BT_DEVICE_WACOM(0xBD) },
{ USB_DEVICE_WACOM(0xC0) },
{ USB_DEVICE_WACOM(0xC2) },
{ USB_DEVICE_WACOM(0xC4) },
{ USB_DEVICE_WACOM(0xC5) },
{ USB_DEVICE_WACOM(0xC6) },
{ USB_DEVICE_WACOM(0xC7) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0xCE) },
{ USB_DEVICE_WACOM(0xD0) },
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
{ USB_DEVICE_WACOM(0xD4) },
{ USB_DEVICE_WACOM(0xD5) },
{ USB_DEVICE_WACOM(0xD6) },
{ USB_DEVICE_WACOM(0xD7) },
{ USB_DEVICE_WACOM(0xD8) },
{ USB_DEVICE_WACOM(0xDA) },
{ USB_DEVICE_WACOM(0xDB) },
{ USB_DEVICE_WACOM(0xDD) },
{ USB_DEVICE_WACOM(0xDE) },
{ USB_DEVICE_WACOM(0xDF) },
{ USB_DEVICE_WACOM(0xE2) },
{ USB_DEVICE_WACOM(0xE3) },
{ USB_DEVICE_WACOM(0xE5) },
{ USB_DEVICE_WACOM(0xE6) },
{ USB_DEVICE_WACOM(0xEC) },
{ USB_DEVICE_WACOM(0xED) },
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_WACOM(0xF6) },
{ USB_DEVICE_WACOM(0xF8) },
{ USB_DEVICE_WACOM(0xFA) },
{ USB_DEVICE_WACOM(0xFB) },
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
{ USB_DEVICE_WACOM(0x10D) },
{ USB_DEVICE_WACOM(0x10E) },
{ USB_DEVICE_WACOM(0x10F) },
{ USB_DEVICE_WACOM(0x116) },
{ USB_DEVICE_WACOM(0x12C) },
{ USB_DEVICE_WACOM(0x300) },
{ USB_DEVICE_WACOM(0x301) },
{ USB_DEVICE_WACOM(0x302) },
{ USB_DEVICE_WACOM(0x303) },
{ USB_DEVICE_WACOM(0x304) },
{ USB_DEVICE_WACOM(0x307) },
{ USB_DEVICE_WACOM(0x309) },
{ USB_DEVICE_WACOM(0x30A) },
{ USB_DEVICE_WACOM(0x30C) },
{ USB_DEVICE_WACOM(0x30E) },
{ USB_DEVICE_WACOM(0x314) },
{ USB_DEVICE_WACOM(0x315) },
{ USB_DEVICE_WACOM(0x317) },
{ USB_DEVICE_WACOM(0x318) },
{ USB_DEVICE_WACOM(0x319) },
{ USB_DEVICE_WACOM(0x323) },
{ USB_DEVICE_WACOM(0x325) },
{ USB_DEVICE_WACOM(0x326) },
{ USB_DEVICE_WACOM(0x32A) },
{ USB_DEVICE_WACOM(0x32B) },
{ USB_DEVICE_WACOM(0x32C) },
{ USB_DEVICE_WACOM(0x32F) },
{ USB_DEVICE_WACOM(0x331) },
{ USB_DEVICE_WACOM(0x333) },
{ USB_DEVICE_WACOM(0x335) },
{ USB_DEVICE_WACOM(0x336) },
{ USB_DEVICE_WACOM(0x33B) },
{ USB_DEVICE_WACOM(0x33C) },
{ USB_DEVICE_WACOM(0x33D) },
{ USB_DEVICE_WACOM(0x33E) },
{ USB_DEVICE_WACOM(0x343) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x4004) },
{ USB_DEVICE_WACOM(0x5000) },
{ USB_DEVICE_WACOM(0x5002) },
{ USB_DEVICE_LENOVO(0x6004) },
{ USB_DEVICE_WACOM(HID_ANY_ID) },
{ I2C_DEVICE_WACOM(HID_ANY_ID) },
{ }
};
MODULE_DEVICE_TABLE(hid, wacom_ids);
Reference in New Issue View Git Blame Copy Permalink