forked from Minki/linux
fa2a02f26e
The ldp board file currently requests gpios required to configure the NEC DPI panel, and provides platform_enable/disable callbacks to configure them. These tasks have been moved to the generic dpi panel driver itself and shouldn't be done in the board files. Remove the gpio requests and the platform callbacks from the board file. Configure the gpio information in generic dpi panel's platform data so that it's passed to the panel driver. Signed-off-by: Archit Taneja <archit@ti.com> Cc: Tony Lindgren <tony@atomide.com>
400 lines
9.4 KiB
C
400 lines
9.4 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-ldp.c
|
|
*
|
|
* Copyright (C) 2008 Texas Instruments Inc.
|
|
* Nishant Kamat <nskamat@ti.com>
|
|
*
|
|
* Modified from mach-omap2/board-3430sdp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/io.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/platform_data/spi-omap2-mcspi.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "board-zoom.h"
|
|
#include "gpmc.h"
|
|
#include "gpmc-smsc911x.h"
|
|
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-data.h>
|
|
|
|
#include "board-flash.h"
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
#include "control.h"
|
|
#include "common-board-devices.h"
|
|
|
|
#define LDP_SMSC911X_CS 1
|
|
#define LDP_SMSC911X_GPIO 152
|
|
#define DEBUG_BASE 0x08000000
|
|
#define LDP_ETHR_START DEBUG_BASE
|
|
|
|
static uint32_t board_keymap[] = {
|
|
KEY(0, 0, KEY_1),
|
|
KEY(1, 0, KEY_2),
|
|
KEY(2, 0, KEY_3),
|
|
KEY(0, 1, KEY_4),
|
|
KEY(1, 1, KEY_5),
|
|
KEY(2, 1, KEY_6),
|
|
KEY(3, 1, KEY_F5),
|
|
KEY(0, 2, KEY_7),
|
|
KEY(1, 2, KEY_8),
|
|
KEY(2, 2, KEY_9),
|
|
KEY(3, 2, KEY_F6),
|
|
KEY(0, 3, KEY_F7),
|
|
KEY(1, 3, KEY_0),
|
|
KEY(2, 3, KEY_F8),
|
|
PERSISTENT_KEY(4, 5),
|
|
KEY(4, 4, KEY_VOLUMEUP),
|
|
KEY(5, 5, KEY_VOLUMEDOWN),
|
|
0
|
|
};
|
|
|
|
static struct matrix_keymap_data board_map_data = {
|
|
.keymap = board_keymap,
|
|
.keymap_size = ARRAY_SIZE(board_keymap),
|
|
};
|
|
|
|
static struct twl4030_keypad_data ldp_kp_twl4030_data = {
|
|
.keymap_data = &board_map_data,
|
|
.rows = 6,
|
|
.cols = 6,
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
|
|
[0] = {
|
|
.code = KEY_ENTER,
|
|
.gpio = 101,
|
|
.desc = "enter sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[1] = {
|
|
.code = KEY_F1,
|
|
.gpio = 102,
|
|
.desc = "func 1",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[2] = {
|
|
.code = KEY_F2,
|
|
.gpio = 103,
|
|
.desc = "func 2",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[3] = {
|
|
.code = KEY_F3,
|
|
.gpio = 104,
|
|
.desc = "func 3",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[4] = {
|
|
.code = KEY_F4,
|
|
.gpio = 105,
|
|
.desc = "func 4",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[5] = {
|
|
.code = KEY_LEFT,
|
|
.gpio = 106,
|
|
.desc = "left sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[6] = {
|
|
.code = KEY_RIGHT,
|
|
.gpio = 107,
|
|
.desc = "right sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[7] = {
|
|
.code = KEY_UP,
|
|
.gpio = 108,
|
|
.desc = "up sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[8] = {
|
|
.code = KEY_DOWN,
|
|
.gpio = 109,
|
|
.desc = "down sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data ldp_gpio_keys = {
|
|
.buttons = ldp_gpio_keys_buttons,
|
|
.nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct platform_device ldp_gpio_keys_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ldp_gpio_keys,
|
|
},
|
|
};
|
|
|
|
static struct omap_smsc911x_platform_data smsc911x_cfg = {
|
|
.cs = LDP_SMSC911X_CS,
|
|
.gpio_irq = LDP_SMSC911X_GPIO,
|
|
.gpio_reset = -EINVAL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
};
|
|
|
|
static inline void __init ldp_init_smsc911x(void)
|
|
{
|
|
gpmc_smsc911x_init(&smsc911x_cfg);
|
|
}
|
|
|
|
/* LCD */
|
|
|
|
#define LCD_PANEL_RESET_GPIO 55
|
|
#define LCD_PANEL_QVGA_GPIO 56
|
|
|
|
static struct panel_generic_dpi_data ldp_panel_data = {
|
|
.name = "nec_nl2432dr22-11b",
|
|
.num_gpios = 4,
|
|
/* gpios filled in code */
|
|
};
|
|
|
|
static struct omap_dss_device ldp_lcd_device = {
|
|
.name = "lcd",
|
|
.driver_name = "generic_dpi_panel",
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
.phy.dpi.data_lines = 18,
|
|
.data = &ldp_panel_data,
|
|
};
|
|
|
|
static struct omap_dss_device *ldp_dss_devices[] = {
|
|
&ldp_lcd_device,
|
|
};
|
|
|
|
static struct omap_dss_board_info ldp_dss_data = {
|
|
.num_devices = ARRAY_SIZE(ldp_dss_devices),
|
|
.devices = ldp_dss_devices,
|
|
.default_device = &ldp_lcd_device,
|
|
};
|
|
|
|
static void __init ldp_display_init(void)
|
|
{
|
|
ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
|
|
ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
|
|
|
|
omap_display_init(&ldp_dss_data);
|
|
}
|
|
|
|
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
|
|
{
|
|
ldp_panel_data.gpios[0] = gpio + 7;
|
|
ldp_panel_data.gpio_invert[0] = true;
|
|
|
|
ldp_panel_data.gpios[1] = gpio + 15;
|
|
ldp_panel_data.gpio_invert[1] = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct twl4030_gpio_platform_data ldp_gpio_data = {
|
|
.setup = ldp_twl_gpio_setup,
|
|
};
|
|
|
|
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
|
|
};
|
|
|
|
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
|
|
static struct regulator_init_data ldp_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply),
|
|
.consumer_supplies = ldp_vmmc1_supply,
|
|
};
|
|
|
|
/* ads7846 on SPI */
|
|
static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
|
|
REGULATOR_SUPPLY("vcc", "spi1.0"),
|
|
};
|
|
|
|
/* VAUX1 */
|
|
static struct regulator_init_data ldp_vaux1 = {
|
|
.constraints = {
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies),
|
|
.consumer_supplies = ldp_vaux1_supplies,
|
|
};
|
|
|
|
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
|
|
};
|
|
|
|
static struct regulator_init_data ldp_vpll2 = {
|
|
.constraints = {
|
|
.name = "VDVI",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies),
|
|
.consumer_supplies = ldp_vpll2_supplies,
|
|
};
|
|
|
|
static struct twl4030_platform_data ldp_twldata = {
|
|
/* platform_data for children goes here */
|
|
.vmmc1 = &ldp_vmmc1,
|
|
.vaux1 = &ldp_vaux1,
|
|
.vpll2 = &ldp_vpll2,
|
|
.gpio = &ldp_gpio_data,
|
|
.keypad = &ldp_kp_twl4030_data,
|
|
};
|
|
|
|
static int __init omap_i2c_init(void)
|
|
{
|
|
omap3_pmic_get_config(&ldp_twldata,
|
|
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
|
|
omap3_pmic_init("twl4030", &ldp_twldata);
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
static struct omap2_hsmmc_info mmc[] __initdata = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct platform_device *ldp_devices[] __initdata = {
|
|
&ldp_gpio_keys_device,
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
static struct mtd_partition ldp_nand_partitions[] = {
|
|
/* All the partition sizes are listed in terms of NAND block size */
|
|
{
|
|
.name = "X-Loader-NAND",
|
|
.offset = 0,
|
|
.size = 4 * (64 * 2048), /* 512KB, 0x80000 */
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "U-Boot-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
|
|
.size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "Boot Env-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
|
|
.size = 2 * (64 * 2048), /* 256KB, 0x40000 */
|
|
},
|
|
{
|
|
.name = "Kernel-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/
|
|
.size = 240 * (64 * 2048), /* 30M, 0x1E00000 */
|
|
},
|
|
{
|
|
.name = "File System - NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */
|
|
.size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */
|
|
},
|
|
|
|
};
|
|
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
|
|
};
|
|
|
|
static void __init omap_ldp_init(void)
|
|
{
|
|
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
|
ldp_init_smsc911x();
|
|
omap_i2c_init();
|
|
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
|
|
omap_ads7846_init(1, 54, 310, NULL);
|
|
omap_serial_init();
|
|
omap_sdrc_init(NULL, NULL);
|
|
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
|
|
usb_musb_init(NULL);
|
|
board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
|
|
ZOOM_NAND_CS, 0, nand_default_timings);
|
|
|
|
omap_hsmmc_init(mmc);
|
|
ldp_display_init();
|
|
}
|
|
|
|
MACHINE_START(OMAP_LDP, "OMAP LDP board")
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap3430_init_early,
|
|
.init_irq = omap3_init_irq,
|
|
.handle_irq = omap3_intc_handle_irq,
|
|
.init_machine = omap_ldp_init,
|
|
.init_late = omap3430_init_late,
|
|
.init_time = omap3_sync32k_timer_init,
|
|
.restart = omap3xxx_restart,
|
|
MACHINE_END
|