forked from Minki/linux
ac53b2e053
Generic MTD
* populate the MTD device 'of_node' field (and get a proper 'of_node' symlink
in sysfs)
- This yielded some new helper functions, and changes across a variety of
drivers
* partitioning cleanups, to prepare for better device-tree based partitioning
in the future
- Eliminate a lot of boilerplate for drivers that want to use OF-based
partition parsing
- The DT bindings for this didn't settle yet, so most non-cleanup portions
are deferred for a future release
NAND
* embed a struct mtd_info inside struct nand_chip
- This is really long overdue; too many drivers have to do the same silly
boilerplate to allocate and link up two "independent" structs, when in
fact, everyone is assuming there is an exact 1:1 relationship between a
NAND chips struct and its underlying MTD. This aids improved helpers and
should make certain abstractions easier in the future.
- Also causes a lot of churn, helped along by some automated code
transformations
* add more core support for detecting (and "correcting") bitflips in erased
pages; requires opt-in by drivers, but at least we kill a few bad
implementations and hopefully stave off future ones
* pxa3xx_nand: cleanups, a few fixes, and PM improvements
* new JZ4780 NAND driver
SPI NOR
* provide default erase function, for controllers that just want to send the
SECTOR_ERASE command directly
* fix some module auto-loading issues with device tree ("jedec,spi-nor")
* error handling fixes
* new Mediatek QSPI flash driver
Other
* cfi: force valid geometry Kconfig (finally!)
- this one used to trip up randconfigs occasionally, since bots aren't
deterred by big scary "advanced configuration" menus
More? Probably. See the commit logs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wFQI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"Generic MTD:
- populate the MTD device 'of_node' field (and get a proper 'of_node'
symlink in sysfs)
This yielded some new helper functions, and changes across a
variety of drivers
- partitioning cleanups, to prepare for better device-tree based
partitioning in the future
Eliminate a lot of boilerplate for drivers that want to use
OF-based partition parsing
The DT bindings for this didn't settle yet, so most non-cleanup
portions are deferred for a future release
NAND:
- embed a struct mtd_info inside struct nand_chip
This is really long overdue; too many drivers have to do the same
silly boilerplate to allocate and link up two "independent"
structs, when in fact, everyone is assuming there is an exact 1:1
relationship between a NAND chips struct and its underlying MTD.
This aids improved helpers and should make certain abstractions
easier in the future.
Also causes a lot of churn, helped along by some automated code
transformations
- add more core support for detecting (and "correcting") bitflips in
erased pages; requires opt-in by drivers, but at least we kill a
few bad implementations and hopefully stave off future ones
- pxa3xx_nand: cleanups, a few fixes, and PM improvements
- new JZ4780 NAND driver
SPI NOR:
- provide default erase function, for controllers that just want to
send the SECTOR_ERASE command directly
- fix some module auto-loading issues with device tree
("jedec,spi-nor")
- error handling fixes
- new Mediatek QSPI flash driver
Other:
- cfi: force valid geometry Kconfig (finally!)
This one used to trip up randconfigs occasionally, since bots
aren't deterred by big scary "advanced configuration" menus
More? Probably. See the commit logs"
* tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits)
mtd: jz4780_nand: replace if/else blocks with switch/case
mtd: nand: jz4780: Update ecc correction error codes
mtd: nandsim: use nand_get_controller_data()
mtd: jz4780_nand: remove useless mtd->priv = chip assignment
staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers
mtd: nand: make use of nand_set/get_controller_data() helpers
ARM: make use of nand_set/get_controller_data() helpers
mtd: nand: add helpers to access ->priv
mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
mtd: nand: jz4740: remove custom 'erased check' implementation
mtd: nand: diskonchip: remove custom 'erased check' implementation
mtd: nand: davinci: remove custom 'erased check' implementation
mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions
mtd: nand: return consistent error codes in ecc.correct() implementations
doc: dt: mtd: new binding for jz4780-{nand,bch}
mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc
mtd: spi-nor: wait until lock/unlock operations are ready
mtd: tests: consolidate kmalloc/memset 0 call to kzalloc
jffs2: use to_delayed_work
mtd: nand: assign reasonable default name for NAND drivers
...
|
||
|---|---|---|
| .. | ||
| include/mach | ||
| am200epd.c | ||
| am300epd.c | ||
| balloon3.c | ||
| capc7117.c | ||
| cm-x2xx-pci.c | ||
| cm-x2xx-pci.h | ||
| cm-x2xx.c | ||
| cm-x255.c | ||
| cm-x270.c | ||
| cm-x300.c | ||
| colibri-evalboard.c | ||
| colibri-pxa3xx.c | ||
| colibri-pxa270-income.c | ||
| colibri-pxa270.c | ||
| colibri-pxa300.c | ||
| colibri-pxa320.c | ||
| corgi_pm.c | ||
| corgi.c | ||
| csb701.c | ||
| csb726.c | ||
| devices.c | ||
| devices.h | ||
| em-x270.c | ||
| eseries.c | ||
| ezx.c | ||
| generic.c | ||
| generic.h | ||
| gumstix.c | ||
| h5000.c | ||
| himalaya.c | ||
| hx4700.c | ||
| icontrol.c | ||
| idp.c | ||
| irq.c | ||
| Kconfig | ||
| littleton.c | ||
| lpd270.c | ||
| lubbock.c | ||
| magician.c | ||
| mainstone.c | ||
| Makefile | ||
| Makefile.boot | ||
| mfp-pxa2xx.c | ||
| mfp-pxa3xx.c | ||
| mioa701_bootresume.S | ||
| mioa701.c | ||
| mp900.c | ||
| mxm8x10.c | ||
| palm27x.c | ||
| palmld.c | ||
| palmt5.c | ||
| palmtc.c | ||
| palmte2.c | ||
| palmtreo.c | ||
| palmtx.c | ||
| palmz72.c | ||
| pcm027.c | ||
| pcm990-baseboard.c | ||
| pm.c | ||
| poodle.c | ||
| pxa2xx.c | ||
| pxa3xx-ulpi.c | ||
| pxa3xx.c | ||
| pxa25x.c | ||
| pxa27x.c | ||
| pxa300.c | ||
| pxa320.c | ||
| pxa930.c | ||
| pxa_cplds_irqs.c | ||
| pxa-dt.c | ||
| raumfeld.c | ||
| reset.c | ||
| saar.c | ||
| sharpsl_pm.c | ||
| sleep.S | ||
| smemc.c | ||
| spitz_pm.c | ||
| spitz.c | ||
| standby.S | ||
| stargate2.c | ||
| tavorevb.c | ||
| tosa-bt.c | ||
| tosa.c | ||
| trizeps4.c | ||
| viper.c | ||
| vpac270.c | ||
| xcep.c | ||
| z2.c | ||
| zeus.c | ||
| zylonite_pxa300.c | ||
| zylonite_pxa320.c | ||
| zylonite.c | ||