linux/drivers/net/igb/e1000_mbx.h
Alexander Duyck 7d5753f08c igb: rework use of VMOLR in regards to PF and VFs
This patch updates the use of the VMOLR to include enabling multicast
promiscous for the VFs should they attempt to send over 30 multicast
addresses or if they use the new message type to enable multicast
promiscuous.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28 03:25:40 -07:00

78 lines
3.6 KiB
C

/*******************************************************************************
Intel(R) Gigabit Ethernet Linux driver
Copyright(c) 2007-2009 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information:
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
#ifndef _E1000_MBX_H_
#define _E1000_MBX_H_
#include "e1000_hw.h"
#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
* PF. The reverse is true if it is E1000_PF_*.
* Message ACK's are the value or'd with 0xF0000000
*/
#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
* this are the ACK */
#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
* this are the NACK */
#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
clear to send requests */
#define E1000_VT_MSGINFO_SHIFT 16
/* bits 23:16 are used for exra info for certain messages */
#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_RESET 0x01 /* VF requests reset */
#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 igb_check_for_msg(struct e1000_hw *, u16);
s32 igb_check_for_ack(struct e1000_hw *, u16);
s32 igb_check_for_rst(struct e1000_hw *, u16);
s32 igb_init_mbx_params_pf(struct e1000_hw *);
#endif /* _E1000_MBX_H_ */