forked from Minki/linux
064bff1c9f
A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
30 lines
1.0 KiB
Makefile
30 lines
1.0 KiB
Makefile
#
|
|
# Makefile for the 8390 network device drivers.
|
|
#
|
|
|
|
obj-$(CONFIG_MAC8390) += mac8390.o
|
|
obj-$(CONFIG_AC3200) += ac3200.o 8390.o
|
|
obj-$(CONFIG_APNE) += apne.o 8390.o
|
|
obj-$(CONFIG_ARM_ETHERH) += etherh.o
|
|
obj-$(CONFIG_AX88796) += ax88796.o
|
|
obj-$(CONFIG_E2100) += e2100.o 8390.o
|
|
obj-$(CONFIG_EL2) += 3c503.o 8390p.o
|
|
obj-$(CONFIG_ES3210) += es3210.o 8390.o
|
|
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
|
|
obj-$(CONFIG_HPLAN) += hp.o 8390p.o
|
|
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
|
|
obj-$(CONFIG_LNE390) += lne390.o 8390.o
|
|
obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
|
|
obj-$(CONFIG_NE2000) += ne.o 8390p.o
|
|
obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
|
|
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
|
|
obj-$(CONFIG_NE3210) += ne3210.o 8390.o
|
|
obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
|
|
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
|
|
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
|
|
obj-$(CONFIG_STNIC) += stnic.o 8390.o
|
|
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
|
|
obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
|
|
obj-$(CONFIG_WD80x3) += wd.o 8390.o
|
|
obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
|