forked from Minki/linux
a556c76adc
Add a driver for Microsemi Ocelot Ethernet switch support. This makes two modules: mscc_ocelot_common handles all the common features that doesn't depend on how the switch is integrated in the SoC. Currently, it handles offloading bridging to the hardware. ocelot_io.c handles register accesses. This is unfortunately needed because the register layout is packed and then depends on the number of ports available on the switch. The register definition files are automatically generated. ocelot_board handles the switch integration on the SoC and on the board. Frame injection and extraction to/from the CPU port is currently done using register accesses which is quite slow. DMA is possible but the port is not able to absorb the whole switch bandwidth. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
189 lines
6.0 KiB
Plaintext
189 lines
6.0 KiB
Plaintext
#
|
|
# Ethernet LAN device configuration
|
|
#
|
|
|
|
menuconfig ETHERNET
|
|
bool "Ethernet driver support"
|
|
depends on NET
|
|
default y
|
|
---help---
|
|
This section contains all the Ethernet device drivers.
|
|
|
|
if ETHERNET
|
|
|
|
config MDIO
|
|
tristate
|
|
|
|
config SUNGEM_PHY
|
|
tristate
|
|
|
|
source "drivers/net/ethernet/3com/Kconfig"
|
|
source "drivers/net/ethernet/adaptec/Kconfig"
|
|
source "drivers/net/ethernet/aeroflex/Kconfig"
|
|
source "drivers/net/ethernet/agere/Kconfig"
|
|
source "drivers/net/ethernet/alacritech/Kconfig"
|
|
source "drivers/net/ethernet/allwinner/Kconfig"
|
|
source "drivers/net/ethernet/alteon/Kconfig"
|
|
source "drivers/net/ethernet/altera/Kconfig"
|
|
source "drivers/net/ethernet/amazon/Kconfig"
|
|
source "drivers/net/ethernet/amd/Kconfig"
|
|
source "drivers/net/ethernet/apm/Kconfig"
|
|
source "drivers/net/ethernet/apple/Kconfig"
|
|
source "drivers/net/ethernet/aquantia/Kconfig"
|
|
source "drivers/net/ethernet/arc/Kconfig"
|
|
source "drivers/net/ethernet/atheros/Kconfig"
|
|
source "drivers/net/ethernet/aurora/Kconfig"
|
|
source "drivers/net/ethernet/cadence/Kconfig"
|
|
source "drivers/net/ethernet/broadcom/Kconfig"
|
|
source "drivers/net/ethernet/brocade/Kconfig"
|
|
source "drivers/net/ethernet/calxeda/Kconfig"
|
|
source "drivers/net/ethernet/cavium/Kconfig"
|
|
source "drivers/net/ethernet/chelsio/Kconfig"
|
|
source "drivers/net/ethernet/cirrus/Kconfig"
|
|
source "drivers/net/ethernet/cisco/Kconfig"
|
|
source "drivers/net/ethernet/cortina/Kconfig"
|
|
|
|
config CX_ECAT
|
|
tristate "Beckhoff CX5020 EtherCAT master support"
|
|
depends on PCI
|
|
depends on X86 || COMPILE_TEST
|
|
---help---
|
|
Driver for EtherCAT master module located on CCAT FPGA
|
|
that can be found on Beckhoff CX5020, and possibly other of CX
|
|
Beckhoff CX series industrial PCs.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called ec_bhf.
|
|
|
|
source "drivers/net/ethernet/davicom/Kconfig"
|
|
|
|
config DNET
|
|
tristate "Dave ethernet support (DNET)"
|
|
depends on HAS_IOMEM
|
|
select PHYLIB
|
|
---help---
|
|
The Dave ethernet interface (DNET) is found on Qong Board FPGA.
|
|
Say Y to include support for the DNET chip.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called dnet.
|
|
|
|
source "drivers/net/ethernet/dec/Kconfig"
|
|
source "drivers/net/ethernet/dlink/Kconfig"
|
|
source "drivers/net/ethernet/emulex/Kconfig"
|
|
source "drivers/net/ethernet/ezchip/Kconfig"
|
|
source "drivers/net/ethernet/neterion/Kconfig"
|
|
source "drivers/net/ethernet/faraday/Kconfig"
|
|
source "drivers/net/ethernet/freescale/Kconfig"
|
|
source "drivers/net/ethernet/fujitsu/Kconfig"
|
|
source "drivers/net/ethernet/hisilicon/Kconfig"
|
|
source "drivers/net/ethernet/hp/Kconfig"
|
|
source "drivers/net/ethernet/huawei/Kconfig"
|
|
source "drivers/net/ethernet/ibm/Kconfig"
|
|
source "drivers/net/ethernet/intel/Kconfig"
|
|
source "drivers/net/ethernet/i825xx/Kconfig"
|
|
source "drivers/net/ethernet/xscale/Kconfig"
|
|
|
|
config JME
|
|
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
|
|
depends on PCI
|
|
select CRC32
|
|
select MII
|
|
---help---
|
|
This driver supports the PCI-Express gigabit ethernet adapters
|
|
based on JMicron JMC250 chipset.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called jme.
|
|
|
|
config KORINA
|
|
tristate "Korina (IDT RC32434) Ethernet support"
|
|
depends on MIKROTIK_RB532
|
|
---help---
|
|
If you have a Mikrotik RouterBoard 500 or IDT RC32434
|
|
based system say Y. Otherwise say N.
|
|
|
|
config LANTIQ_ETOP
|
|
tristate "Lantiq SoC ETOP driver"
|
|
depends on SOC_TYPE_XWAY
|
|
---help---
|
|
Support for the MII0 inside the Lantiq SoC
|
|
|
|
source "drivers/net/ethernet/marvell/Kconfig"
|
|
source "drivers/net/ethernet/mediatek/Kconfig"
|
|
source "drivers/net/ethernet/mellanox/Kconfig"
|
|
source "drivers/net/ethernet/micrel/Kconfig"
|
|
source "drivers/net/ethernet/microchip/Kconfig"
|
|
source "drivers/net/ethernet/mscc/Kconfig"
|
|
source "drivers/net/ethernet/moxa/Kconfig"
|
|
source "drivers/net/ethernet/myricom/Kconfig"
|
|
|
|
config FEALNX
|
|
tristate "Myson MTD-8xx PCI Ethernet support"
|
|
depends on PCI
|
|
select CRC32
|
|
select MII
|
|
---help---
|
|
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
|
|
cards. <http://www.myson.com.tw/>
|
|
|
|
source "drivers/net/ethernet/natsemi/Kconfig"
|
|
source "drivers/net/ethernet/netronome/Kconfig"
|
|
source "drivers/net/ethernet/ni/Kconfig"
|
|
source "drivers/net/ethernet/8390/Kconfig"
|
|
|
|
config NET_NETX
|
|
tristate "NetX Ethernet support"
|
|
select MII
|
|
depends on ARCH_NETX
|
|
---help---
|
|
This is support for the Hilscher netX builtin Ethernet ports
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called netx-eth.
|
|
|
|
source "drivers/net/ethernet/nuvoton/Kconfig"
|
|
source "drivers/net/ethernet/nvidia/Kconfig"
|
|
source "drivers/net/ethernet/nxp/Kconfig"
|
|
source "drivers/net/ethernet/oki-semi/Kconfig"
|
|
|
|
config ETHOC
|
|
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
|
|
depends on HAS_IOMEM && HAS_DMA
|
|
select MII
|
|
select PHYLIB
|
|
select CRC32
|
|
select BITREVERSE
|
|
---help---
|
|
Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
|
|
|
|
source "drivers/net/ethernet/packetengines/Kconfig"
|
|
source "drivers/net/ethernet/pasemi/Kconfig"
|
|
source "drivers/net/ethernet/qlogic/Kconfig"
|
|
source "drivers/net/ethernet/qualcomm/Kconfig"
|
|
source "drivers/net/ethernet/realtek/Kconfig"
|
|
source "drivers/net/ethernet/renesas/Kconfig"
|
|
source "drivers/net/ethernet/rdc/Kconfig"
|
|
source "drivers/net/ethernet/rocker/Kconfig"
|
|
source "drivers/net/ethernet/samsung/Kconfig"
|
|
source "drivers/net/ethernet/seeq/Kconfig"
|
|
source "drivers/net/ethernet/silan/Kconfig"
|
|
source "drivers/net/ethernet/sis/Kconfig"
|
|
source "drivers/net/ethernet/sfc/Kconfig"
|
|
source "drivers/net/ethernet/sgi/Kconfig"
|
|
source "drivers/net/ethernet/smsc/Kconfig"
|
|
source "drivers/net/ethernet/socionext/Kconfig"
|
|
source "drivers/net/ethernet/stmicro/Kconfig"
|
|
source "drivers/net/ethernet/sun/Kconfig"
|
|
source "drivers/net/ethernet/tehuti/Kconfig"
|
|
source "drivers/net/ethernet/ti/Kconfig"
|
|
source "drivers/net/ethernet/toshiba/Kconfig"
|
|
source "drivers/net/ethernet/tundra/Kconfig"
|
|
source "drivers/net/ethernet/via/Kconfig"
|
|
source "drivers/net/ethernet/wiznet/Kconfig"
|
|
source "drivers/net/ethernet/xilinx/Kconfig"
|
|
source "drivers/net/ethernet/xircom/Kconfig"
|
|
source "drivers/net/ethernet/synopsys/Kconfig"
|
|
|
|
endif # ETHERNET
|