linux/arch/arm/mach-omap2
Linus Torvalds 6a497e9d58 This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
 
 - Do away with the last users of the obsolete Kconfig options
   ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
   always sounded like an item on a wishlist to Santa Claus to
   me). We can now select GPIOLIB and be done with it, for all
   archs. After some struggle it even work on UM. Not that it has
   GPIO, but if it wants to, it can select the library.
 
 - Continued efforts to make drivers properly either tristate or
   bool.
 
 - Introduce a warning for drivers assigning default triggers to
   their irqchip lines when probed from device tree, so we find and
   fix these ambigous drivers. It is agreed that in the OF config
   path, the device tree defines trigger characteristics.
 
 - The same warning, mutatis mutandis, for ACPI-probed GPIO
   irqchips.
 
 - We introduce the ability to mark certain IRQ lines as "unusable"
   as they can be taken by BIOS/firmware, unrouted in silicon and
   generally nasty if you use them, and such things. This is
   put to good use in the STMPE driver and also in the Cherryview
   pin control driver.
 
 - A new "mockup" virtual GPIO device that can be used for testing.
   The plan is to add unit tests under tools/* for exercising this
   device and verify that the kernel code paths are working as they
   should.
 
 - Make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
   implicit all the time, but when people started building UM
   with allyesconfig or allmodconfig it exploded in their face.
 
 - Move some stray bits of device tree and ACPI HW description
   callbacks down into their respective implementation silo. These
   were causing issues when compiling on !HAS_IOMEM as well, so
   now eventually UM compiles the GPIOLIB library if it wants to.
 
 New drivers:
 
 - New driver for the Aspeed GPIO front-end companion to the
   pin controller merged through the pin control tree.
 
 - New driver for the LP873x PMIC GPIO portions.
 
 - New driver for Technologic Systems' I2C FPGA GPIO such as
   TS4900, TS-7970, TS-7990 and TS-4100.
 
 - New driver for the Broadcom BCM63xx series including BCM6338
   and BCM6345.
 
 - New driver for the Intel WhiskeyCove PMIC GPIO.
 
 - New driver for the Allwinner AXP209 PMIC GPIO portions.
 
 - New driver for Diamond Systems 48 line GPIO-MM, another of
   these port-mapped I/O expansion cards.
 
 - Support the STMicroelectronics STMPE1600 variant in the STMPE
   driver.
 
 Driver improvements:
 
 - The STMPE driver now supports rising/falling edge detection
   properly for IRQs.
 
 - The PCA954x will now fetch and enable its VCC regulator properly.
 
 - Major rework of the PCA953x driver with the goal of eventually
   switching it over to use regmap and thus modernize it even more.
 
 - Switch the IOP driver to use the generic MMIO GPIO library.
 
 - Move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
   over to this subsystem from MFD, achieveing some separation of
   concerns.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX9OvDAAoJEEEQszewGV1zsPQP/3VLy1fNIpMF0DDyq5tA/GNv
 sinnaPgMtt+qBrM2sbJcTVwV9xtHrs12CC3+2lAhBCIEm4YfHbXvaUMNE+aKJzk4
 ZM7/rb8WMUxjQqzDKStdETsQGo6fxh0qU81OEQNbX9alir20jik9DvTufcs6xCgx
 sqh8KsNGO4Y6tiuKZ6mTZvIjVhMwiTm0NBSDKhdim0DdsOcuxyh6xVOj/0LB2Ei6
 g75X1w++wjh0ryY3bzaeWkQSlXDC6eEKeez7VaEkSUyrxH86buomy0+aP0fqs7vY
 LRZzn/TC97YLT6hslS/OhB7uXrDIY2POSwO/SvusJcveGP7WPGyGr5mDtA4ATRWI
 ios0DBWl629kHfhAMzg3kPJS8LfjCerapvtbdAgqvhH+Vb5IPFx45vypDkR2WtJ7
 bNAySIRMQSHZvJSCvYzjqh8AbWdE4i4k70tFXRMOpWeKIvRVI1cDvLD6cLn3hATM
 IPTytM6i2xqnzcq7mK7EJ18afcR0mv1jHgGAv4M0RMkyJ2IrURvFyZIvUB2MTyuL
 PEBh1ZvTs+MO50eeFwzltY91eagkzgWB0f6sm3l7I7bL2oxE2f/WVcVL9jWbgwpF
 otjFO27u0/6rIulfLUQzDo3gbOq7UaN0VTW4E9CYbOtFtNzCxjFIKTv0IJhTu4TT
 OSur7oFpzAMOGYlpYP8j
 =ABbi
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...
2016-10-05 11:49:09 -07:00
..
include/mach ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
am33xx-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
am33xx.h ARM: OMAP2+: AM43x: early init 2013-06-12 08:00:35 -07:00
board-flash.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-flash.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-generic.c ARM: OMAP2+: Set system_rev from ATAGS for n900 2016-02-10 16:17:15 -08:00
board-ldp.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
board-n8x0.c ARM: SoC/OMAP GPMC driver cleanup and move for 3.19 2014-12-09 16:57:56 -08:00
board-rx51-peripherals.c ARM: omap2: fix missing include 2016-09-23 14:41:55 +02:00
board-rx51-video.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
board-rx51.c arm: omap2: timer: rename omap_sync32k_timer_init() 2015-10-16 11:06:23 -05:00
board-rx51.h
clkt2xxx_dpll.c
clkt2xxx_dpllcore.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c ARM: omap2: use clkdev_create() 2015-05-06 11:58:58 +01:00
clock2xxx.h ARM: OMAP2: clock: remove unused apll code 2015-01-07 10:54:40 -08:00
clock3xxx.h CLK: TI: add omap3 clock init file 2014-01-17 12:35:48 -08:00
clock.c clk: ti: omap5+: dpll: implement errata i810 2015-11-30 11:34:17 -08:00
clock.h clk: ti: move low-level access and init code under clock driver 2015-06-02 12:31:46 +03:00
clockdomain.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
clockdomain.h ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c ARM: OMAP3: fix iva mmu programming issues 2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c ARM: DRA7: clockdomain: Implement timer workaround for errata i874 2016-04-10 11:43:57 -06:00
clockdomains33xx_data.c
clockdomains43xx_data.c ARM: OMAP2+: CM: AM43x clockdomain data 2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
clockdomains54xx_data.c ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header 2013-06-08 11:56:15 -06:00
clockdomains81xx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
clockdomains2420_data.c
clockdomains2430_data.c
cm1_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
cm2xxx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm2xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm3xxx.c ARM: OMAP2+: Fix typo in cm3xxx.c 2016-06-10 04:14:37 -07:00
cm3xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm33xx.c ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero 2016-07-22 23:10:57 -07:00
cm33xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm44xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm81xx.h ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
cm_common.c ARM: OMAP2+: clock: add low-level support for regmap 2015-03-31 21:26:55 +03:00
cm-regbits-7xx.h ARM: OMAP: DRA7: CM: Add minimal regbit shifts 2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h ARM: OMAP2: convert sys_ck and osc_ck to standard clock types 2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h ARM: OMAP4: PRM/CM: Cleanup unused header 2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h ARM: OMAP5: PRM/CM: Cleanup unused header 2013-07-21 22:10:25 -06:00
cm.h ARM: OMAP2+: CM: determine CM base address from device tree 2015-03-27 10:55:57 +02:00
cminst44xx.c ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero 2016-07-22 23:10:57 -07:00
common-board-devices.c
common-board-devices.h arm: omap2: n8x0: move i2c devices to DT 2014-09-16 14:43:11 -07:00
common.c Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688" 2015-07-25 15:28:14 +01:00
common.h ARM: OMAP4+: Allow kexec on SMP variants 2016-06-22 22:57:02 -07:00
control.c ARM: OMAP2+: Fix out of range register access with syscon_config.max_register 2016-02-22 09:22:38 -08:00
control.h ARM: OMAP3: Add support for configuring MMC pins as GPIO pins 2015-05-20 09:23:43 -07:00
cpuidle34xx.c ARM: OMAP3: Add cpuidle parameters table for omap3430 2016-02-19 10:35:39 -08:00
cpuidle44xx.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
ctrl_module_wkup_44xx.h
devices.c Merge branch 'enable-devices' into omap-for-v4.5/fixes 2016-01-25 10:46:21 -08:00
display.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
display.h ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h 2016-06-03 16:00:31 +03:00
dma.c ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot 2016-02-22 10:00:50 -08:00
drm.c ARM: OMAP2+: display: Create omapdrm device inside omap_display_init 2013-10-08 14:02:35 -07:00
dss-common.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
dss-common.h ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board 2013-10-09 07:54:34 -07:00
fb.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
gpio.c
gpmc-nand.c mtd: nand: omap: Clean up device tree support 2016-04-15 11:53:36 +03:00
gpmc-onenand.c ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption 2016-02-22 09:24:10 -08:00
gpmc-smsc911x.c ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() 2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h
gpmc.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
hdq1w.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
hdq1w.h
hsmmc.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
hsmmc.h mmc: omap_hsmmc: remove unused slot_id parameter 2014-11-26 14:30:56 +01:00
i2c.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
i2c.h
id.c Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" 2016-04-19 08:01:05 -07:00
id.h
io.c ARM: OMAP4+: Prevent CPU1 related hang with kexec 2016-06-22 22:55:51 -07:00
iomap.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
Kconfig ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
l3_2xxx.h
l3_3xxx.h
l4_2xxx.h
l4_3xxx.h
Makefile ARM: OMAP2+: Fix build with CONFIG_SMP and CONFIG_PM is not set 2016-07-03 23:29:45 -07:00
mcbsp.c ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code 2016-06-10 05:07:25 -07:00
mmc.h ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
msdi.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux34xx.c ARM: OMAP2+: Fix typo in mux34xx.c 2016-06-10 04:15:33 -07:00
mux34xx.h omap: mux: add AM/DM37x gpios 2013-05-08 17:07:40 -07:00
mux.c ARM: OMAP2+: remove superfluous NULL pointer check 2015-03-26 10:33:25 -07:00
mux.h ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF 2014-02-28 15:36:34 -08:00
omap2-restart.c ARM: OMAP2+: Change core_initcall levels to postcore_initcall 2015-12-03 11:38:09 -08:00
omap3-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-common.c ARM: OMAP4+: Initialize SAR RAM base early for proper CPU1 reset for kexec 2016-06-22 22:55:47 -07:00
omap4-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-sar-layout.h ARM: arm-soc cleanup for 3.10 2013-05-02 09:03:55 -07:00
omap24xx.h
omap34xx.h [media] omap3isp: Replace many MMIO regions by two 2015-04-02 16:45:07 -03:00
omap44xx.h
omap54xx.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
omap_device.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-08-03 07:26:11 -04:00
omap_device.h ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected 2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c ARM: OMAP2+: sparse: add missing static declaration 2015-07-15 23:42:12 -06:00
omap_hwmod_3xxx_data.c ARM: OMAP3: hwmod data: Add sysc information for DSI 2016-07-22 23:05:34 -07:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod: remove DSS addresses from hwmod 2016-06-10 05:10:52 -07:00
omap_hwmod_33xx_43xx_common_data.h ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_33xx_43xx_interconnect_data.c ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: OMAP2+: AM33XX: Add HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to rtc hwmod 2016-07-22 23:09:42 -07:00
omap_hwmod_33xx_data.c ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_43xx_data.c ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_44xx_data.c ARM: omap4: hwmod: Remove elm address space from hwmod data 2015-11-30 13:18:37 -08:00
omap_hwmod_54xx_data.c ARM: OMAP: Remove duplicated operand in OR operation 2015-10-20 01:29:40 -06:00
omap_hwmod_81xx_data.c ARM: OMAP: make ti81xx_rtc_hwmod static 2016-06-22 03:05:18 -07:00
omap_hwmod_2420_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c ARM: OMAP2+: hwmod: RTC: Add lock and unlock functions 2016-04-10 13:20:10 -06:00
omap_hwmod.c ARM: OMAP4+: Have _omap4_wait_target_* check for valid clkctrl_offs 2016-07-22 23:10:15 -07:00
omap_hwmod.h ARM: OMAP4+: hwmod: Add hwmod flag for HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET 2016-07-22 23:08:58 -07:00
omap_opp_data.h
omap_phy_internal.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
omap_twl.c mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree 2014-04-23 15:31:05 +01:00
omap-headsmp.S ARM: OMAP2+: Fix build if CONFIG_SMP is not set 2016-06-27 23:30:02 -07:00
omap-hotplug.c ARM: OMAP4+: Allow kexec on SMP variants 2016-06-22 22:57:02 -07:00
omap-mpuss-lowpower.c ARM: OMAP2+: Fix build with CONFIG_SMP and CONFIG_PM is not set 2016-07-03 23:29:45 -07:00
omap-pm-noop.c ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-pm.h ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-secure.c RX-51: Add support for OMAP3 ROM Random Number Generator 2013-10-08 12:02:12 -07:00
omap-secure.h ARM: OMAP5 / DRA7: Introduce workaround for 801819 2016-05-12 10:14:54 -07:00
omap-smc.S ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1 2013-10-08 11:55:32 -07:00
omap-smp.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
omap-wakeupgen.c ARM/OMAP/wakeupgen: Convert to hotplug state machine 2016-09-19 21:44:26 +02:00
omap-wakeupgen.h ARM: omap: convert wakeupgen to stacked domains 2015-03-15 00:56:13 +00:00
opp2xxx.h
opp3xxx_data.c
opp4xxx_data.c
opp2420_data.c
opp2430_data.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
opp.c ACPI and power management updates for 3.13-rc1 2013-11-14 13:41:48 +09:00
pdata-quirks.c ARM: SoC driver updates for v4.8 2016-08-01 18:36:01 -04:00
pm24xx.c ARM: OMAP2+: Include clk.h 2015-07-20 10:52:36 -07:00
pm34xx.c ARM: OMAP3: Fix external abort on 36xx waking from off mode idle 2016-04-14 08:27:30 -07:00
pm44xx.c ARM: OMAP2+: Remove unneeded semicolons 2015-10-12 10:56:36 -07:00
pm-debug.c Merge branch 'cleanup' into for-linus 2013-05-02 21:31:29 +01:00
pm.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
pm.h ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well 2015-09-14 12:14:47 -07:00
pmu.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
powerdomain-common.c ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files 2014-05-15 22:35:10 -06:00
powerdomain.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
powerdomain.h ARM: OMAP2+: powerdomain.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
powerdomains3xxx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret 2016-06-13 01:04:01 -07:00
powerdomains33xx_data.c
powerdomains43xx_data.c ARM: OMAP2+: PM: AM43x powerdomain data 2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
powerdomains54xx_data.c ARM: OMAP5: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:40 -05:00
prcm43xx.h ARM: AM43XX: hwmod: Fix RSTST register offset for pruss 2016-06-22 02:55:44 -07:00
prcm44xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: cleanup some header includes 2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers 2013-06-08 11:55:18 -06:00
prcm_mpu_44xx_54xx.h ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use 2013-06-08 11:54:40 -06:00
prcm-common.h Merge branch 'dm814x-soc' into omap-for-v4.3/soc 2015-07-23 21:59:18 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm2xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm7xx.h ARM: DRA7: hwmod: Add reset data for PCIe 2016-02-09 02:18:52 -07:00
prm33xx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm33xx.h ARM: dts: am43xx: Remove wrongly defined RSTST offset for PER Domain 2016-06-22 03:33:25 -07:00
prm44xx_54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm44xx.c ARM: OMAP4+: PRM: Add AM437x specific data 2015-07-23 06:08:24 -06:00
prm44xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm_common.c ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data 2015-12-22 17:01:02 -08:00
prm-regbits-24xx.h ARM: OMAP2: PRM/CM: Cleanup unused header 2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK 2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm-regbits-44xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm.h ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init 2015-03-31 21:26:53 +03:00
prminst44xx.c ARM: OMAP4+: PRM: add support for passing status register/bit info to reset 2015-05-08 13:05:15 -06:00
prminst44xx.h ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility 2015-03-31 21:26:44 +03:00
scrm44xx.h
scrm54xx.h ARM: OMAP5: SCRM: Add OMAP54XX header file. 2013-06-08 11:55:44 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sdrc.c
sdrc.h ARM: OMAP2+: Fix typo in sdrc.h 2016-06-10 04:17:07 -07:00
serial.c ARM: OMAP: serial: Rename DRIVER_NAME 2016-02-06 23:13:30 -08:00
serial.h
sleep24xx.S
sleep34xx.S ARM: OMAP2+: Fix l2_inv_api_params for rodata 2016-01-22 08:26:08 -08:00
sleep44xx.S ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata 2016-01-22 08:26:08 -08:00
smartreflex-class3.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
soc.h ARM: SoC platform updates for v4.7 2016-05-18 12:35:46 -07:00
sr_device.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
sram242x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram243x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram.c ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
sram.h ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
ti81xx-restart.c ARM: OMAP2+: Fix reboot for 81xx 2015-01-14 17:37:16 -08:00
ti81xx.h
timer.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
twl-common.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
twl-common.h
usb-host.c usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h> 2014-04-21 14:07:24 -05:00
usb-musb.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
usb-tusb6010.c ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME 2015-03-06 12:39:48 +02:00
usb.h ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
vc3xxx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc44xx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc.c ARM: OMAP3: vc: Remove unused macros 2015-10-12 10:56:36 -07:00
vc.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
voltage.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltage.h ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains44xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains54xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
vp3xxx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp44xx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp.c
vp.h ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
wd_timer.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
wd_timer.h