forked from Minki/linux
fcf634098c
The basic idea behind cross memory attach is to allow MPI programs doing
intra-node communication to do a single copy of the message rather than a
double copy of the message via shared memory.
The following patch attempts to achieve this by allowing a destination
process, given an address and size from a source process, to copy memory
directly from the source process into its own address space via a system
call. There is also a symmetrical ability to copy from the current
process's address space into a destination process's address space.
- Use of /proc/pid/mem has been considered, but there are issues with
using it:
- Does not allow for specifying iovecs for both src and dest, assuming
preadv or pwritev was implemented either the area read from or
written to would need to be contiguous.
- Currently mem_read allows only processes who are currently
ptrace'ing the target and are still able to ptrace the target to read
from the target. This check could possibly be moved to the open call,
but its not clear exactly what race this restriction is stopping
(reason appears to have been lost)
- Having to send the fd of /proc/self/mem via SCM_RIGHTS on unix
domain socket is a bit ugly from a userspace point of view,
especially when you may have hundreds if not (eventually) thousands
of processes that all need to do this with each other
- Doesn't allow for some future use of the interface we would like to
consider adding in the future (see below)
- Interestingly reading from /proc/pid/mem currently actually
involves two copies! (But this could be fixed pretty easily)
As mentioned previously use of vmsplice instead was considered, but has
problems. Since you need the reader and writer working co-operatively if
the pipe is not drained then you block. Which requires some wrapping to
do non blocking on the send side or polling on the receive. In all to all
communication it requires ordering otherwise you can deadlock. And in the
example of many MPI tasks writing to one MPI task vmsplice serialises the
copying.
There are some cases of MPI collectives where even a single copy interface
does not get us the performance gain we could. For example in an
MPI_Reduce rather than copy the data from the source we would like to
instead use it directly in a mathops (say the reduce is doing a sum) as
this would save us doing a copy. We don't need to keep a copy of the data
from the source. I haven't implemented this, but I think this interface
could in the future do all this through the use of the flags - eg could
specify the math operation and type and the kernel rather than just
copying the data would apply the specified operation between the source
and destination and store it in the destination.
Although we don't have a "second user" of the interface (though I've had
some nibbles from people who may be interested in using it for intra
process messaging which is not MPI). This interface is something which
hardware vendors are already doing for their custom drivers to implement
fast local communication. And so in addition to this being useful for
OpenMPI it would mean the driver maintainers don't have to fix things up
when the mm changes.
There was some discussion about how much faster a true zero copy would
go. Here's a link back to the email with some testing I did on that:
http://marc.info/?l=linux-mm&m=130105930902915&w=2
There is a basic man page for the proposed interface here:
http://ozlabs.org/~cyeoh/cma/process_vm_readv.txt
This has been implemented for x86 and powerpc, other architecture should
mainly (I think) just need to add syscall numbers for the process_vm_readv
and process_vm_writev. There are 32 bit compatibility versions for
64-bit kernels.
For arch maintainers there are some simple tests to be able to quickly
verify that the syscalls are working correctly here:
http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgz
Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <linux-man@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|---|---|---|
| .. | ||
| debug | ||
| events | ||
| gcov | ||
| irq | ||
| power | ||
| time | ||
| trace | ||
| .gitignore | ||
| acct.c | ||
| async.c | ||
| audit_tree.c | ||
| audit_watch.c | ||
| audit.c | ||
| audit.h | ||
| auditfilter.c | ||
| auditsc.c | ||
| backtracetest.c | ||
| bounds.c | ||
| capability.c | ||
| cgroup_freezer.c | ||
| cgroup.c | ||
| compat.c | ||
| configs.c | ||
| cpu_pm.c | ||
| cpu.c | ||
| cpuset.c | ||
| crash_dump.c | ||
| cred.c | ||
| delayacct.c | ||
| dma.c | ||
| elfcore.c | ||
| exec_domain.c | ||
| exit.c | ||
| extable.c | ||
| fork.c | ||
| freezer.c | ||
| futex_compat.c | ||
| futex.c | ||
| groups.c | ||
| hrtimer.c | ||
| hung_task.c | ||
| irq_work.c | ||
| itimer.c | ||
| jump_label.c | ||
| kallsyms.c | ||
| Kconfig.freezer | ||
| Kconfig.hz | ||
| Kconfig.locks | ||
| Kconfig.preempt | ||
| kexec.c | ||
| kfifo.c | ||
| kmod.c | ||
| kprobes.c | ||
| ksysfs.c | ||
| kthread.c | ||
| latencytop.c | ||
| lockdep_internals.h | ||
| lockdep_proc.c | ||
| lockdep_states.h | ||
| lockdep.c | ||
| Makefile | ||
| module.c | ||
| mutex-debug.c | ||
| mutex-debug.h | ||
| mutex.c | ||
| mutex.h | ||
| notifier.c | ||
| nsproxy.c | ||
| padata.c | ||
| panic.c | ||
| params.c | ||
| pid_namespace.c | ||
| pid.c | ||
| posix-cpu-timers.c | ||
| posix-timers.c | ||
| printk.c | ||
| profile.c | ||
| ptrace.c | ||
| range.c | ||
| rcu.h | ||
| rcupdate.c | ||
| rcutiny_plugin.h | ||
| rcutiny.c | ||
| rcutorture.c | ||
| rcutree_plugin.h | ||
| rcutree_trace.c | ||
| rcutree.c | ||
| rcutree.h | ||
| relay.c | ||
| res_counter.c | ||
| resource.c | ||
| rtmutex_common.h | ||
| rtmutex-debug.c | ||
| rtmutex-debug.h | ||
| rtmutex-tester.c | ||
| rtmutex.c | ||
| rtmutex.h | ||
| rwsem.c | ||
| sched_autogroup.c | ||
| sched_autogroup.h | ||
| sched_clock.c | ||
| sched_cpupri.c | ||
| sched_cpupri.h | ||
| sched_debug.c | ||
| sched_fair.c | ||
| sched_features.h | ||
| sched_idletask.c | ||
| sched_rt.c | ||
| sched_stats.h | ||
| sched_stoptask.c | ||
| sched.c | ||
| seccomp.c | ||
| semaphore.c | ||
| signal.c | ||
| smp.c | ||
| softirq.c | ||
| spinlock.c | ||
| srcu.c | ||
| stacktrace.c | ||
| stop_machine.c | ||
| sys_ni.c | ||
| sys.c | ||
| sysctl_binary.c | ||
| sysctl_check.c | ||
| sysctl.c | ||
| taskstats.c | ||
| test_kprobes.c | ||
| time.c | ||
| timeconst.pl | ||
| timer.c | ||
| tracepoint.c | ||
| tsacct.c | ||
| uid16.c | ||
| up.c | ||
| user_namespace.c | ||
| user-return-notifier.c | ||
| user.c | ||
| utsname_sysctl.c | ||
| utsname.c | ||
| wait.c | ||
| watchdog.c | ||
| workqueue_sched.h | ||
| workqueue.c | ||