leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
549c0b1848
linux/drivers/mmc/host/dw_mmc.c
Prabu Thangamuthu 69d99fdcfd mmc: dw_mmc: Add IDMAC 64-bit address mode support 
Synopsys DW_MMC IP core supports Internal DMA Controller with 64-bit address mode from IP version 2.70a onwards.
Updated the driver to support IDMAC 64-bit addressing mode.

Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26 14:30:50 +01:00

2896 lines
72 KiB
C
Raw Blame History

/*
* Synopsys DesignWare Multimedia Card Interface driver
* (Based on NXP driver for lpc 31xx)
*
* Copyright (C) 2009 NXP Semiconductors
* Copyright (C) 2009, 2010 Imagination Technologies Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/blkdev.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/dw_mmc.h>
#include <linux/bitops.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/mmc/slot-gpio.h>
#include "dw_mmc.h"
/* Common flag combinations */
#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
SDMMC_INT_HTO | SDMMC_INT_SBE | \
SDMMC_INT_EBE)
#define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
SDMMC_INT_RESP_ERR)
#define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \
DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
#define DW_MCI_SEND_STATUS 1
#define DW_MCI_RECV_STATUS 2
#define DW_MCI_DMA_THRESHOLD 16
#define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */
#define DW_MCI_FREQ_MIN 400000 /* unit: HZ */
#ifdef CONFIG_MMC_DW_IDMAC
#define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
SDMMC_IDMAC_INT_TI)
struct idmac_desc_64addr {
u32 des0; /* Control Descriptor */
u32 des1; /* Reserved */
u32 des2; /*Buffer sizes */
#define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
((d)->des2 = ((d)->des2 & 0x03ffe000) | ((s) & 0x1fff))
u32 des3; /* Reserved */
u32 des4; /* Lower 32-bits of Buffer Address Pointer 1*/
u32 des5; /* Upper 32-bits of Buffer Address Pointer 1*/
u32 des6; /* Lower 32-bits of Next Descriptor Address */
u32 des7; /* Upper 32-bits of Next Descriptor Address */
};
struct idmac_desc {
u32 des0; /* Control Descriptor */
#define IDMAC_DES0_DIC BIT(1)
#define IDMAC_DES0_LD BIT(2)
#define IDMAC_DES0_FD BIT(3)
#define IDMAC_DES0_CH BIT(4)
#define IDMAC_DES0_ER BIT(5)
#define IDMAC_DES0_CES BIT(30)
#define IDMAC_DES0_OWN BIT(31)
u32 des1; /* Buffer sizes */
#define IDMAC_SET_BUFFER1_SIZE(d, s) \
((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
u32 des2; /* buffer 1 physical address */
u32 des3; /* buffer 2 physical address */
};
#endif /* CONFIG_MMC_DW_IDMAC */
static bool dw_mci_reset(struct dw_mci *host);
static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
#if defined(CONFIG_DEBUG_FS)
static int dw_mci_req_show(struct seq_file *s, void *v)
{
struct dw_mci_slot *slot = s->private;
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_command *stop;
struct mmc_data *data;
/* Make sure we get a consistent snapshot */
spin_lock_bh(&slot->host->lock);
mrq = slot->mrq;
if (mrq) {
cmd = mrq->cmd;
data = mrq->data;
stop = mrq->stop;
if (cmd)
seq_printf(s,
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
cmd->opcode, cmd->arg, cmd->flags,
cmd->resp[0], cmd->resp[1], cmd->resp[2],
cmd->resp[2], cmd->error);
if (data)
seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
data->bytes_xfered, data->blocks,
data->blksz, data->flags, data->error);
if (stop)
seq_printf(s,
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
stop->opcode, stop->arg, stop->flags,
stop->resp[0], stop->resp[1], stop->resp[2],
stop->resp[2], stop->error);
}
spin_unlock_bh(&slot->host->lock);
return 0;
}
static int dw_mci_req_open(struct inode *inode, struct file *file)
{
return single_open(file, dw_mci_req_show, inode->i_private);
}
static const struct file_operations dw_mci_req_fops = {
.owner = THIS_MODULE,
.open = dw_mci_req_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int dw_mci_regs_show(struct seq_file *s, void *v)
{
seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
return 0;
}
static int dw_mci_regs_open(struct inode *inode, struct file *file)
{
return single_open(file, dw_mci_regs_show, inode->i_private);
}
static const struct file_operations dw_mci_regs_fops = {
.owner = THIS_MODULE,
.open = dw_mci_regs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
{
struct mmc_host *mmc = slot->mmc;
struct dw_mci *host = slot->host;
struct dentry *root;
struct dentry *node;
root = mmc->debugfs_root;
if (!root)
return;
node = debugfs_create_file("regs", S_IRUSR, root, host,
&dw_mci_regs_fops);
if (!node)
goto err;
node = debugfs_create_file("req", S_IRUSR, root, slot,
&dw_mci_req_fops);
if (!node)
goto err;
node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
if (!node)
goto err;
node = debugfs_create_x32("pending_events", S_IRUSR, root,
(u32 *)&host->pending_events);
if (!node)
goto err;
node = debugfs_create_x32("completed_events", S_IRUSR, root,
(u32 *)&host->completed_events);
if (!node)
goto err;
return;
err:
dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
}
#endif /* defined(CONFIG_DEBUG_FS) */
static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg);
static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct mmc_data *data;
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci *host = slot->host;
const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 cmdr;
cmd->error = -EINPROGRESS;
cmdr = cmd->opcode;
if (cmd->opcode == MMC_STOP_TRANSMISSION ||
cmd->opcode == MMC_GO_IDLE_STATE ||
cmd->opcode == MMC_GO_INACTIVE_STATE ||
(cmd->opcode == SD_IO_RW_DIRECT &&
((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
cmdr |= SDMMC_CMD_STOP;
else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
if (cmd->opcode == SD_SWITCH_VOLTAGE) {
u32 clk_en_a;
/* Special bit makes CMD11 not die */
cmdr |= SDMMC_CMD_VOLT_SWITCH;
/* Change state to continue to handle CMD11 weirdness */
WARN_ON(slot->host->state != STATE_SENDING_CMD);
slot->host->state = STATE_SENDING_CMD11;
/*
* We need to disable low power mode (automatic clock stop)
* while doing voltage switch so we don't confuse the card,
* since stopping the clock is a specific part of the UHS
* voltage change dance.
*
* Note that low power mode (SDMMC_CLKEN_LOW_PWR) will be
* unconditionally turned back on in dw_mci_setup_bus() if it's
* ever called with a non-zero clock. That shouldn't happen
* until the voltage change is all done.
*/
clk_en_a = mci_readl(host, CLKENA);
clk_en_a &= ~(SDMMC_CLKEN_LOW_PWR << slot->id);
mci_writel(host, CLKENA, clk_en_a);
mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
SDMMC_CMD_PRV_DAT_WAIT, 0);
}
if (cmd->flags & MMC_RSP_PRESENT) {
/* We expect a response, so set this bit */
cmdr |= SDMMC_CMD_RESP_EXP;
if (cmd->flags & MMC_RSP_136)
cmdr |= SDMMC_CMD_RESP_LONG;
}
if (cmd->flags & MMC_RSP_CRC)
cmdr |= SDMMC_CMD_RESP_CRC;
data = cmd->data;
if (data) {
cmdr |= SDMMC_CMD_DAT_EXP;
if (data->flags & MMC_DATA_STREAM)
cmdr |= SDMMC_CMD_STRM_MODE;
if (data->flags & MMC_DATA_WRITE)
cmdr |= SDMMC_CMD_DAT_WR;
}
if (drv_data && drv_data->prepare_command)
drv_data->prepare_command(slot->host, &cmdr);
return cmdr;
}
static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
{
struct mmc_command *stop;
u32 cmdr;
if (!cmd->data)
return 0;
stop = &host->stop_abort;
cmdr = cmd->opcode;
memset(stop, 0, sizeof(struct mmc_command));
if (cmdr == MMC_READ_SINGLE_BLOCK ||
cmdr == MMC_READ_MULTIPLE_BLOCK ||
cmdr == MMC_WRITE_BLOCK ||
cmdr == MMC_WRITE_MULTIPLE_BLOCK) {
stop->opcode = MMC_STOP_TRANSMISSION;
stop->arg = 0;
stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
} else if (cmdr == SD_IO_RW_EXTENDED) {
stop->opcode = SD_IO_RW_DIRECT;
stop->arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
((cmd->arg >> 28) & 0x7);
stop->flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
} else {
return 0;
}
cmdr = stop->opcode | SDMMC_CMD_STOP |
SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP;
return cmdr;
}
static void dw_mci_start_command(struct dw_mci *host,
struct mmc_command *cmd, u32 cmd_flags)
{
host->cmd = cmd;
dev_vdbg(host->dev,
"start command: ARGR=0x%08x CMDR=0x%08x\n",
cmd->arg, cmd_flags);
mci_writel(host, CMDARG, cmd->arg);
wmb();
mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
}
static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
{
struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
dw_mci_start_command(host, stop, host->stop_cmdr);
}
/* DMA interface functions */
static void dw_mci_stop_dma(struct dw_mci *host)
{
if (host->using_dma) {
host->dma_ops->stop(host);
host->dma_ops->cleanup(host);
}
/* Data transfer was stopped by the interrupt handler */
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static int dw_mci_get_dma_dir(struct mmc_data *data)
{
if (data->flags & MMC_DATA_WRITE)
return DMA_TO_DEVICE;
else
return DMA_FROM_DEVICE;
}
#ifdef CONFIG_MMC_DW_IDMAC
static void dw_mci_dma_cleanup(struct dw_mci *host)
{
struct mmc_data *data = host->data;
if (data)
if (!data->host_cookie)
dma_unmap_sg(host->dev,
data->sg,
data->sg_len,
dw_mci_get_dma_dir(data));
}
static void dw_mci_idmac_reset(struct dw_mci *host)
{
u32 bmod = mci_readl(host, BMOD);
/* Software reset of DMA */
bmod |= SDMMC_IDMAC_SWRESET;
mci_writel(host, BMOD, bmod);
}
static void dw_mci_idmac_stop_dma(struct dw_mci *host)
{
u32 temp;
/* Disable and reset the IDMAC interface */
temp = mci_readl(host, CTRL);
temp &= ~SDMMC_CTRL_USE_IDMAC;
temp |= SDMMC_CTRL_DMA_RESET;
mci_writel(host, CTRL, temp);
/* Stop the IDMAC running */
temp = mci_readl(host, BMOD);
temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
temp |= SDMMC_IDMAC_SWRESET;
mci_writel(host, BMOD, temp);
}
static void dw_mci_idmac_complete_dma(struct dw_mci *host)
{
struct mmc_data *data = host->data;
dev_vdbg(host->dev, "DMA complete\n");
host->dma_ops->cleanup(host);
/*
* If the card was removed, data will be NULL. No point in trying to
* send the stop command or waiting for NBUSY in this case.
*/
if (data) {
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
tasklet_schedule(&host->tasklet);
}
}
static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
unsigned int sg_len)
{
int i;
if (host->dma_64bit_address == 1) {
struct idmac_desc_64addr *desc = host->sg_cpu;
for (i = 0; i < sg_len; i++, desc++) {
unsigned int length = sg_dma_len(&data->sg[i]);
u64 mem_addr = sg_dma_address(&data->sg[i]);
/*
* Set the OWN bit and disable interrupts for this
* descriptor
*/
desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
IDMAC_DES0_CH;
/* Buffer length */
IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, length);
/* Physical address to DMA to/from */
desc->des4 = mem_addr & 0xffffffff;
desc->des5 = mem_addr >> 32;
}
/* Set first descriptor */
desc = host->sg_cpu;
desc->des0 |= IDMAC_DES0_FD;
/* Set last descriptor */
desc = host->sg_cpu + (i - 1) *
sizeof(struct idmac_desc_64addr);
desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
desc->des0 |= IDMAC_DES0_LD;
} else {
struct idmac_desc *desc = host->sg_cpu;
for (i = 0; i < sg_len; i++, desc++) {
unsigned int length = sg_dma_len(&data->sg[i]);
u32 mem_addr = sg_dma_address(&data->sg[i]);
/*
* Set the OWN bit and disable interrupts for this
* descriptor
*/
desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
IDMAC_DES0_CH;
/* Buffer length */
IDMAC_SET_BUFFER1_SIZE(desc, length);
/* Physical address to DMA to/from */
desc->des2 = mem_addr;
}
/* Set first descriptor */
desc = host->sg_cpu;
desc->des0 |= IDMAC_DES0_FD;
/* Set last descriptor */
desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
desc->des0 |= IDMAC_DES0_LD;
}
wmb();
}
static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
{
u32 temp;
dw_mci_translate_sglist(host, host->data, sg_len);
/* Make sure to reset DMA in case we did PIO before this */
dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
dw_mci_idmac_reset(host);
/* Select IDMAC interface */
temp = mci_readl(host, CTRL);
temp |= SDMMC_CTRL_USE_IDMAC;
mci_writel(host, CTRL, temp);
wmb();
/* Enable the IDMAC */
temp = mci_readl(host, BMOD);
temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
mci_writel(host, BMOD, temp);
/* Start it running */
mci_writel(host, PLDMND, 1);
}
static int dw_mci_idmac_init(struct dw_mci *host)
{
int i;
if (host->dma_64bit_address == 1) {
struct idmac_desc_64addr *p;
/* Number of descriptors in the ring buffer */
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
/* Forward link the descriptor list */
for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
i++, p++) {
p->des6 = (host->sg_dma +
(sizeof(struct idmac_desc_64addr) *
(i + 1))) & 0xffffffff;
p->des7 = (u64)(host->sg_dma +
(sizeof(struct idmac_desc_64addr) *
(i + 1))) >> 32;
/* Initialize reserved and buffer size fields to "0" */
p->des1 = 0;
p->des2 = 0;
p->des3 = 0;
}
/* Set the last descriptor as the end-of-ring descriptor */
p->des6 = host->sg_dma & 0xffffffff;
p->des7 = (u64)host->sg_dma >> 32;
p->des0 = IDMAC_DES0_ER;
} else {
struct idmac_desc *p;
/* Number of descriptors in the ring buffer */
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
/* Forward link the descriptor list */
for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
p->des3 = host->sg_dma + (sizeof(struct idmac_desc) *
(i + 1));
/* Set the last descriptor as the end-of-ring descriptor */
p->des3 = host->sg_dma;
p->des0 = IDMAC_DES0_ER;
}
dw_mci_idmac_reset(host);
if (host->dma_64bit_address == 1) {
/* Mask out interrupts - get Tx & Rx complete only */
mci_writel(host, IDSTS64, IDMAC_INT_CLR);
mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
/* Set the descriptor base address */
mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
} else {
/* Mask out interrupts - get Tx & Rx complete only */
mci_writel(host, IDSTS, IDMAC_INT_CLR);
mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
/* Set the descriptor base address */
mci_writel(host, DBADDR, host->sg_dma);
}
return 0;
}
static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
.init = dw_mci_idmac_init,
.start = dw_mci_idmac_start_dma,
.stop = dw_mci_idmac_stop_dma,
.complete = dw_mci_idmac_complete_dma,
.cleanup = dw_mci_dma_cleanup,
};
#endif /* CONFIG_MMC_DW_IDMAC */
static int dw_mci_pre_dma_transfer(struct dw_mci *host,
struct mmc_data *data,
bool next)
{
struct scatterlist *sg;
unsigned int i, sg_len;
if (!next && data->host_cookie)
return data->host_cookie;
/*
* We don't do DMA on "complex" transfers, i.e. with
* non-word-aligned buffers or lengths. Also, we don't bother
* with all the DMA setup overhead for short transfers.
*/
if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
return -EINVAL;
if (data->blksz & 3)
return -EINVAL;
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->offset & 3 || sg->length & 3)
return -EINVAL;
}
sg_len = dma_map_sg(host->dev,
data->sg,
data->sg_len,
dw_mci_get_dma_dir(data));
if (sg_len == 0)
return -EINVAL;
if (next)
data->host_cookie = sg_len;
return sg_len;
}
static void dw_mci_pre_req(struct mmc_host *mmc,
struct mmc_request *mrq,
bool is_first_req)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
if (!slot->host->use_dma || !data)
return;
if (data->host_cookie) {
data->host_cookie = 0;
return;
}
if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
data->host_cookie = 0;
}
static void dw_mci_post_req(struct mmc_host *mmc,
struct mmc_request *mrq,
int err)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
if (!slot->host->use_dma || !data)
return;
if (data->host_cookie)
dma_unmap_sg(slot->host->dev,
data->sg,
data->sg_len,
dw_mci_get_dma_dir(data));
data->host_cookie = 0;
}
static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
{
#ifdef CONFIG_MMC_DW_IDMAC
unsigned int blksz = data->blksz;
const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
u32 fifo_width = 1 << host->data_shift;
u32 blksz_depth = blksz / fifo_width, fifoth_val;
u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
tx_wmark = (host->fifo_depth) / 2;
tx_wmark_invers = host->fifo_depth - tx_wmark;
/*
* MSIZE is '1',
* if blksz is not a multiple of the FIFO width
*/
if (blksz % fifo_width) {
msize = 0;
rx_wmark = 1;
goto done;
}
do {
if (!((blksz_depth % mszs[idx]) ||
(tx_wmark_invers % mszs[idx]))) {
msize = idx;
rx_wmark = mszs[idx] - 1;
break;
}
} while (--idx > 0);
/*
* If idx is '0', it won't be tried
* Thus, initial values are uesed
*/
done:
fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
mci_writel(host, FIFOTH, fifoth_val);
#endif
}
static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
{
unsigned int blksz = data->blksz;
u32 blksz_depth, fifo_depth;
u16 thld_size;
WARN_ON(!(data->flags & MMC_DATA_READ));
if (host->timing != MMC_TIMING_MMC_HS200 &&
host->timing != MMC_TIMING_UHS_SDR104)
goto disable;
blksz_depth = blksz / (1 << host->data_shift);
fifo_depth = host->fifo_depth;
if (blksz_depth > fifo_depth)
goto disable;
/*
* If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
* If (blksz_depth) < (fifo_depth >> 1), should be thld_size = blksz
* Currently just choose blksz.
*/
thld_size = blksz;
mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
return;
disable:
mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
}
static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
{
int sg_len;
u32 temp;
host->using_dma = 0;
/* If we don't have a channel, we can't do DMA */
if (!host->use_dma)
return -ENODEV;
sg_len = dw_mci_pre_dma_transfer(host, data, 0);
if (sg_len < 0) {
host->dma_ops->stop(host);
return sg_len;
}
host->using_dma = 1;
dev_vdbg(host->dev,
"sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
(unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
sg_len);
/*
* Decide the MSIZE and RX/TX Watermark.
* If current block size is same with previous size,
* no need to update fifoth.
*/
if (host->prev_blksz != data->blksz)
dw_mci_adjust_fifoth(host, data);
/* Enable the DMA interface */
temp = mci_readl(host, CTRL);
temp |= SDMMC_CTRL_DMA_ENABLE;
mci_writel(host, CTRL, temp);
/* Disable RX/TX IRQs, let DMA handle it */
temp = mci_readl(host, INTMASK);
temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
mci_writel(host, INTMASK, temp);
host->dma_ops->start(host, sg_len);
return 0;
}
static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
{
u32 temp;
data->error = -EINPROGRESS;
WARN_ON(host->data);
host->sg = NULL;
host->data = data;
if (data->flags & MMC_DATA_READ) {
host->dir_status = DW_MCI_RECV_STATUS;
dw_mci_ctrl_rd_thld(host, data);
} else {
host->dir_status = DW_MCI_SEND_STATUS;
}
if (dw_mci_submit_data_dma(host, data)) {
int flags = SG_MITER_ATOMIC;
if (host->data->flags & MMC_DATA_READ)
flags |= SG_MITER_TO_SG;
else
flags |= SG_MITER_FROM_SG;
sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->sg = data->sg;
host->part_buf_start = 0;
host->part_buf_count = 0;
mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
temp = mci_readl(host, INTMASK);
temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
mci_writel(host, INTMASK, temp);
temp = mci_readl(host, CTRL);
temp &= ~SDMMC_CTRL_DMA_ENABLE;
mci_writel(host, CTRL, temp);
/*
* Use the initial fifoth_val for PIO mode.
* If next issued data may be transfered by DMA mode,
* prev_blksz should be invalidated.
*/
mci_writel(host, FIFOTH, host->fifoth_val);
host->prev_blksz = 0;
} else {
/*
* Keep the current block size.
* It will be used to decide whether to update
* fifoth register next time.
*/
host->prev_blksz = data->blksz;
}
}
static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
{
struct dw_mci *host = slot->host;
unsigned long timeout = jiffies + msecs_to_jiffies(500);
unsigned int cmd_status = 0;
mci_writel(host, CMDARG, arg);
wmb();
mci_writel(host, CMD, SDMMC_CMD_START | cmd);
while (time_before(jiffies, timeout)) {
cmd_status = mci_readl(host, CMD);
if (!(cmd_status & SDMMC_CMD_START))
return;
}
dev_err(&slot->mmc->class_dev,
"Timeout sending command (cmd %#x arg %#x status %#x)\n",
cmd, arg, cmd_status);
}
static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
{
struct dw_mci *host = slot->host;
unsigned int clock = slot->clock;
u32 div;
u32 clk_en_a;
u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
/* We must continue to set bit 28 in CMD until the change is complete */
if (host->state == STATE_WAITING_CMD11_DONE)
sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
if (!clock) {
mci_writel(host, CLKENA, 0);
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
} else if (clock != host->current_speed || force_clkinit) {
div = host->bus_hz / clock;
if (host->bus_hz % clock && host->bus_hz > clock)
/*
* move the + 1 after the divide to prevent
* over-clocking the card.
*/
div += 1;
div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
if ((clock << div) != slot->__clk_old || force_clkinit)
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
slot->id, host->bus_hz, clock,
div ? ((host->bus_hz / div) >> 1) :
host->bus_hz, div);
/* disable clock */
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
/* inform CIU */
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
/* set clock to desired speed */
mci_writel(host, CLKDIV, div);
/* inform CIU */
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
/* enable clock; only low power if no SDIO */
clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
mci_writel(host, CLKENA, clk_en_a);
/* inform CIU */
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
/* keep the clock with reflecting clock dividor */
slot->__clk_old = clock << div;
}
host->current_speed = clock;
/* Set the current slot bus width */
mci_writel(host, CTYPE, (slot->ctype << slot->id));
}
static void __dw_mci_start_request(struct dw_mci *host,
struct dw_mci_slot *slot,
struct mmc_command *cmd)
{
struct mmc_request *mrq;
struct mmc_data *data;
u32 cmdflags;
mrq = slot->mrq;
host->cur_slot = slot;
host->mrq = mrq;
host->pending_events = 0;
host->completed_events = 0;
host->cmd_status = 0;
host->data_status = 0;
host->dir_status = 0;
data = cmd->data;
if (data) {
mci_writel(host, TMOUT, 0xFFFFFFFF);
mci_writel(host, BYTCNT, data->blksz*data->blocks);
mci_writel(host, BLKSIZ, data->blksz);
}
cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
/* this is the first command, send the initialization clock */
if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
cmdflags |= SDMMC_CMD_INIT;
if (data) {
dw_mci_submit_data(host, data);
wmb();
}
dw_mci_start_command(host, cmd, cmdflags);
if (mrq->stop)
host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
else
host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
}
static void dw_mci_start_request(struct dw_mci *host,
struct dw_mci_slot *slot)
{
struct mmc_request *mrq = slot->mrq;
struct mmc_command *cmd;
cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
__dw_mci_start_request(host, slot, cmd);
}
/* must be called with host->lock held */
static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
struct mmc_request *mrq)
{
dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
host->state);
slot->mrq = mrq;
if (host->state == STATE_WAITING_CMD11_DONE) {
dev_warn(&slot->mmc->class_dev,
"Voltage change didn't complete\n");
/*
* this case isn't expected to happen, so we can
* either crash here or just try to continue on
* in the closest possible state
*/
host->state = STATE_IDLE;
}
if (host->state == STATE_IDLE) {
host->state = STATE_SENDING_CMD;
dw_mci_start_request(host, slot);
} else {
list_add_tail(&slot->queue_node, &host->queue);
}
}
static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci *host = slot->host;
WARN_ON(slot->mrq);
/*
* The check for card presence and queueing of the request must be
* atomic, otherwise the card could be removed in between and the
* request wouldn't fail until another card was inserted.
*/
spin_lock_bh(&host->lock);
if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
spin_unlock_bh(&host->lock);
mrq->cmd->error = -ENOMEDIUM;
mmc_request_done(mmc, mrq);
return;
}
dw_mci_queue_request(host, slot, mrq);
spin_unlock_bh(&host->lock);
}
static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 regs;
int ret;
switch (ios->bus_width) {
case MMC_BUS_WIDTH_4:
slot->ctype = SDMMC_CTYPE_4BIT;
break;
case MMC_BUS_WIDTH_8:
slot->ctype = SDMMC_CTYPE_8BIT;
break;
default:
/* set default 1 bit mode */
slot->ctype = SDMMC_CTYPE_1BIT;
}
regs = mci_readl(slot->host, UHS_REG);
/* DDR mode set */
if (ios->timing == MMC_TIMING_MMC_DDR52)
regs |= ((0x1 << slot->id) << 16);
else
regs &= ~((0x1 << slot->id) << 16);
mci_writel(slot->host, UHS_REG, regs);
slot->host->timing = ios->timing;
/*
* Use mirror of ios->clock to prevent race with mmc
* core ios update when finding the minimum.
*/
slot->clock = ios->clock;
if (drv_data && drv_data->set_ios)
drv_data->set_ios(slot->host, ios);
/* Slot specific timing and width adjustment */
dw_mci_setup_bus(slot, false);
if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
slot->host->state = STATE_IDLE;
switch (ios->power_mode) {
case MMC_POWER_UP:
if (!IS_ERR(mmc->supply.vmmc)) {
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
ios->vdd);
if (ret) {
dev_err(slot->host->dev,
"failed to enable vmmc regulator\n");
/*return, if failed turn on vmmc*/
return;
}
}
if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
ret = regulator_enable(mmc->supply.vqmmc);
if (ret < 0)
dev_err(slot->host->dev,
"failed to enable vqmmc regulator\n");
else
slot->host->vqmmc_enabled = true;
}
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
regs = mci_readl(slot->host, PWREN);
regs |= (1 << slot->id);
mci_writel(slot->host, PWREN, regs);
break;
case MMC_POWER_OFF:
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled) {
regulator_disable(mmc->supply.vqmmc);
slot->host->vqmmc_enabled = false;
}
regs = mci_readl(slot->host, PWREN);
regs &= ~(1 << slot->id);
mci_writel(slot->host, PWREN, regs);
break;
default:
break;
}
}
static int dw_mci_card_busy(struct mmc_host *mmc)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
u32 status;
/*
* Check the busy bit which is low when DAT[3:0]
* (the data lines) are 0000
*/
status = mci_readl(slot->host, STATUS);
return !!(status & SDMMC_STATUS_BUSY);
}
static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci *host = slot->host;
u32 uhs;
u32 v18 = SDMMC_UHS_18V << slot->id;
int min_uv, max_uv;
int ret;
/*
* Program the voltage. Note that some instances of dw_mmc may use
* the UHS_REG for this. For other instances (like exynos) the UHS_REG
* does no harm but you need to set the regulator directly. Try both.
*/
uhs = mci_readl(host, UHS_REG);
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
min_uv = 2700000;
max_uv = 3600000;
uhs &= ~v18;
} else {
min_uv = 1700000;
max_uv = 1950000;
uhs |= v18;
}
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
if (ret) {
dev_dbg(&mmc->class_dev,
"Regulator set error %d: %d - %d\n",
ret, min_uv, max_uv);
return ret;
}
}
mci_writel(host, UHS_REG, uhs);
return 0;
}
static int dw_mci_get_ro(struct mmc_host *mmc)
{
int read_only;
struct dw_mci_slot *slot = mmc_priv(mmc);
int gpio_ro = mmc_gpio_get_ro(mmc);
/* Use platform get_ro function, else try on board write protect */
if ((slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) ||
(slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT))
read_only = 0;
else if (!IS_ERR_VALUE(gpio_ro))
read_only = gpio_ro;
else
read_only =
mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
dev_dbg(&mmc->class_dev, "card is %s\n",
read_only ? "read-only" : "read-write");
return read_only;
}
static int dw_mci_get_cd(struct mmc_host *mmc)
{
int present;
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci_board *brd = slot->host->pdata;
struct dw_mci *host = slot->host;
int gpio_cd = mmc_gpio_get_cd(mmc);
/* Use platform get_cd function, else try onboard card detect */
if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
present = 1;
else if (!IS_ERR_VALUE(gpio_cd))
present = gpio_cd;
else
present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
== 0 ? 1 : 0;
spin_lock_bh(&host->lock);
if (present) {
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
dev_dbg(&mmc->class_dev, "card is present\n");
} else {
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
dev_dbg(&mmc->class_dev, "card is not present\n");
}
spin_unlock_bh(&host->lock);
return present;
}
/*
* Disable lower power mode.
*
* Low power mode will stop the card clock when idle. According to the
* description of the CLKENA register we should disable low power mode
* for SDIO cards if we need SDIO interrupts to work.
*
* This function is fast if low power mode is already disabled.
*/
static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
{
struct dw_mci *host = slot->host;
u32 clk_en_a;
const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
clk_en_a = mci_readl(host, CLKENA);
if (clk_en_a & clken_low_pwr) {
mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
SDMMC_CMD_PRV_DAT_WAIT, 0);
}
}
static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci *host = slot->host;
u32 int_mask;
/* Enable/disable Slot Specific SDIO interrupt */
int_mask = mci_readl(host, INTMASK);
if (enb) {
/*
* Turn off low power mode if it was enabled. This is a bit of
* a heavy operation and we disable / enable IRQs a lot, so
* we'll leave low power mode disabled and it will get
* re-enabled again in dw_mci_setup_bus().
*/
dw_mci_disable_low_power(slot);
mci_writel(host, INTMASK,
(int_mask | SDMMC_INT_SDIO(slot->id)));
} else {
mci_writel(host, INTMASK,
(int_mask & ~SDMMC_INT_SDIO(slot->id)));
}
}
static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci *host = slot->host;
const struct dw_mci_drv_data *drv_data = host->drv_data;
struct dw_mci_tuning_data tuning_data;
int err = -ENOSYS;
if (opcode == MMC_SEND_TUNING_BLOCK_HS200) {
if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
tuning_data.blk_pattern = tuning_blk_pattern_8bit;
tuning_data.blksz = sizeof(tuning_blk_pattern_8bit);
} else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
tuning_data.blk_pattern = tuning_blk_pattern_4bit;
tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
} else {
return -EINVAL;
}
} else if (opcode == MMC_SEND_TUNING_BLOCK) {
tuning_data.blk_pattern = tuning_blk_pattern_4bit;
tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
} else {
dev_err(host->dev,
"Undefined command(%d) for tuning\n", opcode);
return -EINVAL;
}
if (drv_data && drv_data->execute_tuning)
err = drv_data->execute_tuning(slot, opcode, &tuning_data);
return err;
}
static const struct mmc_host_ops dw_mci_ops = {
.request = dw_mci_request,
.pre_req = dw_mci_pre_req,
.post_req = dw_mci_post_req,
.set_ios = dw_mci_set_ios,
.get_ro = dw_mci_get_ro,
.get_cd = dw_mci_get_cd,
.enable_sdio_irq = dw_mci_enable_sdio_irq,
.execute_tuning = dw_mci_execute_tuning,
.card_busy = dw_mci_card_busy,
.start_signal_voltage_switch = dw_mci_switch_voltage,
};
static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
__releases(&host->lock)
__acquires(&host->lock)
{
struct dw_mci_slot *slot;
struct mmc_host *prev_mmc = host->cur_slot->mmc;
WARN_ON(host->cmd || host->data);
host->cur_slot->mrq = NULL;
host->mrq = NULL;
if (!list_empty(&host->queue)) {
slot = list_entry(host->queue.next,
struct dw_mci_slot, queue_node);
list_del(&slot->queue_node);
dev_vdbg(host->dev, "list not empty: %s is next\n",
mmc_hostname(slot->mmc));
host->state = STATE_SENDING_CMD;
dw_mci_start_request(host, slot);
} else {
dev_vdbg(host->dev, "list empty\n");
if (host->state == STATE_SENDING_CMD11)
host->state = STATE_WAITING_CMD11_DONE;
else
host->state = STATE_IDLE;
}
spin_unlock(&host->lock);
mmc_request_done(prev_mmc, mrq);
spin_lock(&host->lock);
}
static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
{
u32 status = host->cmd_status;
host->cmd_status = 0;
/* Read the response from the card (up to 16 bytes) */
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
cmd->resp[3] = mci_readl(host, RESP0);
cmd->resp[2] = mci_readl(host, RESP1);
cmd->resp[1] = mci_readl(host, RESP2);
cmd->resp[0] = mci_readl(host, RESP3);
} else {
cmd->resp[0] = mci_readl(host, RESP0);
cmd->resp[1] = 0;
cmd->resp[2] = 0;
cmd->resp[3] = 0;
}
}
if (status & SDMMC_INT_RTO)
cmd->error = -ETIMEDOUT;
else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC))
cmd->error = -EILSEQ;
else if (status & SDMMC_INT_RESP_ERR)
cmd->error = -EIO;
else
cmd->error = 0;
if (cmd->error) {
/* newer ip versions need a delay between retries */
if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
mdelay(20);
}
return cmd->error;
}
static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
{
u32 status = host->data_status;
if (status & DW_MCI_DATA_ERROR_FLAGS) {
if (status & SDMMC_INT_DRTO) {
data->error = -ETIMEDOUT;
} else if (status & SDMMC_INT_DCRC) {
data->error = -EILSEQ;
} else if (status & SDMMC_INT_EBE) {
if (host->dir_status ==
DW_MCI_SEND_STATUS) {
/*
* No data CRC status was returned.
* The number of bytes transferred
* will be exaggerated in PIO mode.
*/
data->bytes_xfered = 0;
data->error = -ETIMEDOUT;
} else if (host->dir_status ==
DW_MCI_RECV_STATUS) {
data->error = -EIO;
}
} else {
/* SDMMC_INT_SBE is included */
data->error = -EIO;
}
dev_dbg(host->dev, "data error, status 0x%08x\n", status);
/*
* After an error, there may be data lingering
* in the FIFO
*/
dw_mci_reset(host);
} else {
data->bytes_xfered = data->blocks * data->blksz;
data->error = 0;
}
return data->error;
}
static void dw_mci_tasklet_func(unsigned long priv)
{
struct dw_mci *host = (struct dw_mci *)priv;
struct mmc_data *data;
struct mmc_command *cmd;
struct mmc_request *mrq;
enum dw_mci_state state;
enum dw_mci_state prev_state;
unsigned int err;
spin_lock(&host->lock);
state = host->state;
data = host->data;
mrq = host->mrq;
do {
prev_state = state;
switch (state) {
case STATE_IDLE:
case STATE_WAITING_CMD11_DONE:
break;
case STATE_SENDING_CMD11:
case STATE_SENDING_CMD:
if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
&host->pending_events))
break;
cmd = host->cmd;
host->cmd = NULL;
set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
err = dw_mci_command_complete(host, cmd);
if (cmd == mrq->sbc && !err) {
prev_state = state = STATE_SENDING_CMD;
__dw_mci_start_request(host, host->cur_slot,
mrq->cmd);
goto unlock;
}
if (cmd->data && err) {
dw_mci_stop_dma(host);
send_stop_abort(host, data);
state = STATE_SENDING_STOP;
break;
}
if (!cmd->data || err) {
dw_mci_request_end(host, mrq);
goto unlock;
}
prev_state = state = STATE_SENDING_DATA;
/* fall through */
case STATE_SENDING_DATA:
/*
* We could get a data error and never a transfer
* complete so we'd better check for it here.
*
* Note that we don't really care if we also got a
* transfer complete; stopping the DMA and sending an
* abort won't hurt.
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
dw_mci_stop_dma(host);
send_stop_abort(host, data);
state = STATE_DATA_ERROR;
break;
}
if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
&host->pending_events))
break;
set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
/*
* Handle an EVENT_DATA_ERROR that might have shown up
* before the transfer completed. This might not have
* been caught by the check above because the interrupt
* could have gone off between the previous check and
* the check for transfer complete.
*
* Technically this ought not be needed assuming we
* get a DATA_COMPLETE eventually (we'll notice the
* error and end the request), but it shouldn't hurt.
*
* This has the advantage of sending the stop command.
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
dw_mci_stop_dma(host);
send_stop_abort(host, data);
state = STATE_DATA_ERROR;
break;
}
prev_state = state = STATE_DATA_BUSY;
/* fall through */
case STATE_DATA_BUSY:
if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
&host->pending_events))
break;
host->data = NULL;
set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
err = dw_mci_data_complete(host, data);
if (!err) {
if (!data->stop || mrq->sbc) {
if (mrq->sbc && data->stop)
data->stop->error = 0;
dw_mci_request_end(host, mrq);
goto unlock;
}
/* stop command for open-ended transfer*/
if (data->stop)
send_stop_abort(host, data);
} else {
/*
* If we don't have a command complete now we'll
* never get one since we just reset everything;
* better end the request.
*
* If we do have a command complete we'll fall
* through to the SENDING_STOP command and
* everything will be peachy keen.
*/
if (!test_bit(EVENT_CMD_COMPLETE,
&host->pending_events)) {
host->cmd = NULL;
dw_mci_request_end(host, mrq);
goto unlock;
}
}
/*
* If err has non-zero,
* stop-abort command has been already issued.
*/
prev_state = state = STATE_SENDING_STOP;
/* fall through */
case STATE_SENDING_STOP:
if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
&host->pending_events))
break;
/* CMD error in data command */
if (mrq->cmd->error && mrq->data)
dw_mci_reset(host);
host->cmd = NULL;
host->data = NULL;
if (mrq->stop)
dw_mci_command_complete(host, mrq->stop);
else
host->cmd_status = 0;
dw_mci_request_end(host, mrq);
goto unlock;
case STATE_DATA_ERROR:
if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
&host->pending_events))
break;
state = STATE_DATA_BUSY;
break;
}
} while (state != prev_state);
host->state = state;
unlock:
spin_unlock(&host->lock);
}
/* push final bytes to part_buf, only use during push */
static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
{
memcpy((void *)&host->part_buf, buf, cnt);
host->part_buf_count = cnt;
}
/* append bytes to part_buf, only use during push */
static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
{
cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
host->part_buf_count += cnt;
return cnt;
}
/* pull first bytes from part_buf, only use during pull */
static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
{
cnt = min(cnt, (int)host->part_buf_count);
if (cnt) {
memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
cnt);
host->part_buf_count -= cnt;
host->part_buf_start += cnt;
}
return cnt;
}
/* pull final bytes from the part_buf, assuming it's just been filled */
static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
{
memcpy(buf, &host->part_buf, cnt);
host->part_buf_start = cnt;
host->part_buf_count = (1 << host->data_shift) - cnt;
}
static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
{
struct mmc_data *data = host->data;
int init_cnt = cnt;
/* try and push anything in the part_buf */
if (unlikely(host->part_buf_count)) {
int len = dw_mci_push_part_bytes(host, buf, cnt);
buf += len;
cnt -= len;
if (host->part_buf_count == 2) {
mci_writew(host, DATA(host->data_offset),
host->part_buf16);
host->part_buf_count = 0;
}
}
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
if (unlikely((unsigned long)buf & 0x1)) {
while (cnt >= 2) {
u16 aligned_buf[64];
int len = min(cnt & -2, (int)sizeof(aligned_buf));
int items = len >> 1;
int i;
/* memcpy from input buffer into aligned buffer */
memcpy(aligned_buf, buf, len);
buf += len;
cnt -= len;
/* push data from aligned buffer into fifo */
for (i = 0; i < items; ++i)
mci_writew(host, DATA(host->data_offset),
aligned_buf[i]);
}
} else
#endif
{
u16 *pdata = buf;
for (; cnt >= 2; cnt -= 2)
mci_writew(host, DATA(host->data_offset), *pdata++);
buf = pdata;
}
/* put anything remaining in the part_buf */
if (cnt) {
dw_mci_set_part_bytes(host, buf, cnt);
/* Push data if we have reached the expected data length */
if ((data->bytes_xfered + init_cnt) ==
(data->blksz * data->blocks))
mci_writew(host, DATA(host->data_offset),
host->part_buf16);
}
}
static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
{
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
if (unlikely((unsigned long)buf & 0x1)) {
while (cnt >= 2) {
/* pull data from fifo into aligned buffer */
u16 aligned_buf[64];
int len = min(cnt & -2, (int)sizeof(aligned_buf));
int items = len >> 1;
int i;
for (i = 0; i < items; ++i)
aligned_buf[i] = mci_readw(host,
DATA(host->data_offset));
/* memcpy from aligned buffer into output buffer */
memcpy(buf, aligned_buf, len);
buf += len;
cnt -= len;
}
} else
#endif
{
u16 *pdata = buf;
for (; cnt >= 2; cnt -= 2)
*pdata++ = mci_readw(host, DATA(host->data_offset));
buf = pdata;
}
if (cnt) {
host->part_buf16 = mci_readw(host, DATA(host->data_offset));
dw_mci_pull_final_bytes(host, buf, cnt);
}
}
static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
{
struct mmc_data *data = host->data;
int init_cnt = cnt;
/* try and push anything in the part_buf */
if (unlikely(host->part_buf_count)) {
int len = dw_mci_push_part_bytes(host, buf, cnt);
buf += len;
cnt -= len;
if (host->part_buf_count == 4) {
mci_writel(host, DATA(host->data_offset),
host->part_buf32);
host->part_buf_count = 0;
}
}
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
if (unlikely((unsigned long)buf & 0x3)) {
while (cnt >= 4) {
u32 aligned_buf[32];
int len = min(cnt & -4, (int)sizeof(aligned_buf));
int items = len >> 2;
int i;
/* memcpy from input buffer into aligned buffer */
memcpy(aligned_buf, buf, len);
buf += len;
cnt -= len;
/* push data from aligned buffer into fifo */
for (i = 0; i < items; ++i)
mci_writel(host, DATA(host->data_offset),
aligned_buf[i]);
}
} else
#endif
{
u32 *pdata = buf;
for (; cnt >= 4; cnt -= 4)
mci_writel(host, DATA(host->data_offset), *pdata++);
buf = pdata;
}
/* put anything remaining in the part_buf */
if (cnt) {
dw_mci_set_part_bytes(host, buf, cnt);
/* Push data if we have reached the expected data length */
if ((data->bytes_xfered + init_cnt) ==
(data->blksz * data->blocks))
mci_writel(host, DATA(host->data_offset),
host->part_buf32);
}
}
static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
{
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
if (unlikely((unsigned long)buf & 0x3)) {
while (cnt >= 4) {
/* pull data from fifo into aligned buffer */
u32 aligned_buf[32];
int len = min(cnt & -4, (int)sizeof(aligned_buf));
int items = len >> 2;
int i;
for (i = 0; i < items; ++i)
aligned_buf[i] = mci_readl(host,
DATA(host->data_offset));
/* memcpy from aligned buffer into output buffer */
memcpy(buf, aligned_buf, len);
buf += len;
cnt -= len;
}
} else
#endif
{
u32 *pdata = buf;
for (; cnt >= 4; cnt -= 4)
*pdata++ = mci_readl(host, DATA(host->data_offset));
buf = pdata;
}
if (cnt) {
host->part_buf32 = mci_readl(host, DATA(host->data_offset));
dw_mci_pull_final_bytes(host, buf, cnt);
}
}
static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
{
struct mmc_data *data = host->data;
int init_cnt = cnt;
/* try and push anything in the part_buf */
if (unlikely(host->part_buf_count)) {
int len = dw_mci_push_part_bytes(host, buf, cnt);
buf += len;
cnt -= len;
if (host->part_buf_count == 8) {
mci_writeq(host, DATA(host->data_offset),
host->part_buf);
host->part_buf_count = 0;
}
}
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
if (unlikely((unsigned long)buf & 0x7)) {
while (cnt >= 8) {
u64 aligned_buf[16];
int len = min(cnt & -8, (int)sizeof(aligned_buf));
int items = len >> 3;
int i;
/* memcpy from input buffer into aligned buffer */
memcpy(aligned_buf, buf, len);
buf += len;
cnt -= len;
/* push data from aligned buffer into fifo */
for (i = 0; i < items; ++i)
mci_writeq(host, DATA(host->data_offset),
aligned_buf[i]);
}
} else
#endif
{
u64 *pdata = buf;
for (; cnt >= 8; cnt -= 8)
mci_writeq(host, DATA(host->data_offset), *pdata++);
buf = pdata;
}
/* put anything remaining in the part_buf */
if (cnt) {
dw_mci_set_part_bytes(host, buf, cnt);
/* Push data if we have reached the expected data length */
if ((data->bytes_xfered + init_cnt) ==
(data->blksz * data->blocks))
mci_writeq(host, DATA(host->data_offset),
host->part_buf);
}
}
static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
{
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
if (unlikely((unsigned long)buf & 0x7)) {
while (cnt >= 8) {
/* pull data from fifo into aligned buffer */
u64 aligned_buf[16];
int len = min(cnt & -8, (int)sizeof(aligned_buf));
int items = len >> 3;
int i;
for (i = 0; i < items; ++i)
aligned_buf[i] = mci_readq(host,
DATA(host->data_offset));
/* memcpy from aligned buffer into output buffer */
memcpy(buf, aligned_buf, len);
buf += len;
cnt -= len;
}
} else
#endif
{
u64 *pdata = buf;
for (; cnt >= 8; cnt -= 8)
*pdata++ = mci_readq(host, DATA(host->data_offset));
buf = pdata;
}
if (cnt) {
host->part_buf = mci_readq(host, DATA(host->data_offset));
dw_mci_pull_final_bytes(host, buf, cnt);
}
}
static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
{
int len;
/* get remaining partial bytes */
len = dw_mci_pull_part_bytes(host, buf, cnt);
if (unlikely(len == cnt))
return;
buf += len;
cnt -= len;
/* get the rest of the data */
host->pull_data(host, buf, cnt);
}
static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
{
struct sg_mapping_iter *sg_miter = &host->sg_miter;
void *buf;
unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int len;
unsigned int remain, fcnt;
do {
if (!sg_miter_next(sg_miter))
goto done;
host->sg = sg_miter->piter.sg;
buf = sg_miter->addr;
remain = sg_miter->length;
offset = 0;
do {
fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
<< shift) + host->part_buf_count;
len = min(remain, fcnt);
if (!len)
break;
dw_mci_pull_data(host, (void *)(buf + offset), len);
data->bytes_xfered += len;
offset += len;
remain -= len;
} while (remain);
sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
/* if the RXDR is ready read again */
} while ((status & SDMMC_INT_RXDR) ||
(dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
if (!remain) {
if (!sg_miter_next(sg_miter))
goto done;
sg_miter->consumed = 0;
}
sg_miter_stop(sg_miter);
return;
done:
sg_miter_stop(sg_miter);
host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static void dw_mci_write_data_pio(struct dw_mci *host)
{
struct sg_mapping_iter *sg_miter = &host->sg_miter;
void *buf;
unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int len;
unsigned int fifo_depth = host->fifo_depth;
unsigned int remain, fcnt;
do {
if (!sg_miter_next(sg_miter))
goto done;
host->sg = sg_miter->piter.sg;
buf = sg_miter->addr;
remain = sg_miter->length;
offset = 0;
do {
fcnt = ((fifo_depth -
SDMMC_GET_FCNT(mci_readl(host, STATUS)))
<< shift) - host->part_buf_count;
len = min(remain, fcnt);
if (!len)
break;
host->push_data(host, (void *)(buf + offset), len);
data->bytes_xfered += len;
offset += len;
remain -= len;
} while (remain);
sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
if (!remain) {
if (!sg_miter_next(sg_miter))
goto done;
sg_miter->consumed = 0;
}
sg_miter_stop(sg_miter);
return;
done:
sg_miter_stop(sg_miter);
host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
{
if (!host->cmd_status)
host->cmd_status = status;
smp_wmb();
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
tasklet_schedule(&host->tasklet);
}
static void dw_mci_handle_cd(struct dw_mci *host)
{
int i;
for (i = 0; i < host->num_slots; i++) {
struct dw_mci_slot *slot = host->slot[i];
if (!slot)
continue;
if (slot->mmc->ops->card_event)
slot->mmc->ops->card_event(slot->mmc);
mmc_detect_change(slot->mmc,
msecs_to_jiffies(host->pdata->detect_delay_ms));
}
}
static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
{
struct dw_mci *host = dev_id;
u32 pending;
int i;
pending = mci_readl(host, MINTSTS); /* read-only mask reg */
/*
* DTO fix - version 2.10a and below, and only if internal DMA
* is configured.
*/
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
if (!pending &&
((mci_readl(host, STATUS) >> 17) & 0x1fff))
pending |= SDMMC_INT_DATA_OVER;
}
if (pending) {
/* Check volt switch first, since it can look like an error */
if ((host->state == STATE_SENDING_CMD11) &&
(pending & SDMMC_INT_VOLT_SWITCH)) {
mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
pending &= ~SDMMC_INT_VOLT_SWITCH;
dw_mci_cmd_interrupt(host, pending);
}
if (pending & DW_MCI_CMD_ERROR_FLAGS) {
mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
host->cmd_status = pending;
smp_wmb();
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
}
if (pending & DW_MCI_DATA_ERROR_FLAGS) {
/* if there is an error report DATA_ERROR */
mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
host->data_status = pending;
smp_wmb();
set_bit(EVENT_DATA_ERROR, &host->pending_events);
tasklet_schedule(&host->tasklet);
}
if (pending & SDMMC_INT_DATA_OVER) {
mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
if (!host->data_status)
host->data_status = pending;
smp_wmb();
if (host->dir_status == DW_MCI_RECV_STATUS) {
if (host->sg != NULL)
dw_mci_read_data_pio(host, true);
}
set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
tasklet_schedule(&host->tasklet);
}
if (pending & SDMMC_INT_RXDR) {
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
dw_mci_read_data_pio(host, false);
}
if (pending & SDMMC_INT_TXDR) {
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
dw_mci_write_data_pio(host);
}
if (pending & SDMMC_INT_CMD_DONE) {
mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
dw_mci_cmd_interrupt(host, pending);
}
if (pending & SDMMC_INT_CD) {
mci_writel(host, RINTSTS, SDMMC_INT_CD);
dw_mci_handle_cd(host);
}
/* Handle SDIO Interrupts */
for (i = 0; i < host->num_slots; i++) {
struct dw_mci_slot *slot = host->slot[i];
if (pending & SDMMC_INT_SDIO(i)) {
mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
mmc_signal_sdio_irq(slot->mmc);
}
}
}
#ifdef CONFIG_MMC_DW_IDMAC
/* Handle DMA interrupts */
if (host->dma_64bit_address == 1) {
pending = mci_readl(host, IDSTS64);
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
host->dma_ops->complete(host);
}
} else {
pending = mci_readl(host, IDSTS);
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
host->dma_ops->complete(host);
}
}
#endif
return IRQ_HANDLED;
}
#ifdef CONFIG_OF
/* given a slot id, find out the device node representing that slot */
static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
{
struct device_node *np;
const __be32 *addr;
int len;
if (!dev || !dev->of_node)
return NULL;
for_each_child_of_node(dev->of_node, np) {
addr = of_get_property(np, "reg", &len);
if (!addr || (len < sizeof(int)))
continue;
if (be32_to_cpup(addr) == slot)
return np;
}
return NULL;
}
static struct dw_mci_of_slot_quirks {
char *quirk;
int id;
} of_slot_quirks[] = {
{
.quirk = "disable-wp",
.id = DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
},
};
static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
{
struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
int quirks = 0;
int idx;
/* get quirks */
for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) {
dev_warn(dev, "Slot quirk %s is deprecated\n",
of_slot_quirks[idx].quirk);
quirks |= of_slot_quirks[idx].id;
}
return quirks;
}
#else /* CONFIG_OF */
static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
{
return 0;
}
#endif /* CONFIG_OF */
static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
{
struct mmc_host *mmc;
struct dw_mci_slot *slot;
const struct dw_mci_drv_data *drv_data = host->drv_data;
int ctrl_id, ret;
u32 freq[2];
mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
if (!mmc)
return -ENOMEM;
slot = mmc_priv(mmc);
slot->id = id;
slot->mmc = mmc;
slot->host = host;
host->slot[id] = slot;
slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id);
mmc->ops = &dw_mci_ops;
if (of_property_read_u32_array(host->dev->of_node,
"clock-freq-min-max", freq, 2)) {
mmc->f_min = DW_MCI_FREQ_MIN;
mmc->f_max = DW_MCI_FREQ_MAX;
} else {
mmc->f_min = freq[0];
mmc->f_max = freq[1];
}
/*if there are external regulators, get them*/
ret = mmc_regulator_get_supply(mmc);
if (ret == -EPROBE_DEFER)
goto err_host_allocated;
if (!mmc->ocr_avail)
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
if (host->pdata->caps)
mmc->caps = host->pdata->caps;
if (host->pdata->pm_caps)
mmc->pm_caps = host->pdata->pm_caps;
if (host->dev->of_node) {
ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
if (ctrl_id < 0)
ctrl_id = 0;
} else {
ctrl_id = to_platform_device(host->dev)->id;
}
if (drv_data && drv_data->caps)
mmc->caps |= drv_data->caps[ctrl_id];
if (host->pdata->caps2)
mmc->caps2 = host->pdata->caps2;
ret = mmc_of_parse(mmc);
if (ret)
goto err_host_allocated;
if (host->pdata->blk_settings) {
mmc->max_segs = host->pdata->blk_settings->max_segs;
mmc->max_blk_size = host->pdata->blk_settings->max_blk_size;
mmc->max_blk_count = host->pdata->blk_settings->max_blk_count;
mmc->max_req_size = host->pdata->blk_settings->max_req_size;
mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
} else {
/* Useful defaults if platform data is unset. */
#ifdef CONFIG_MMC_DW_IDMAC
mmc->max_segs = host->ring_size;
mmc->max_blk_size = 65536;
mmc->max_blk_count = host->ring_size;
mmc->max_seg_size = 0x1000;
mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count;
#else
mmc->max_segs = 64;
mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
mmc->max_blk_count = 512;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
#endif /* CONFIG_MMC_DW_IDMAC */
}
if (dw_mci_get_cd(mmc))
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
else
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
ret = mmc_add_host(mmc);
if (ret)
goto err_host_allocated;
#if defined(CONFIG_DEBUG_FS)
dw_mci_init_debugfs(slot);
#endif
return 0;
err_host_allocated:
mmc_free_host(mmc);
return ret;
}
static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
{
/* Debugfs stuff is cleaned up by mmc core */
mmc_remove_host(slot->mmc);
slot->host->slot[id] = NULL;
mmc_free_host(slot->mmc);
}
static void dw_mci_init_dma(struct dw_mci *host)
{
int addr_config;
/* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
if (addr_config == 1) {
/* host supports IDMAC in 64-bit address mode */
host->dma_64bit_address = 1;
dev_info(host->dev, "IDMAC supports 64-bit address mode.\n");
if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64));
} else {
/* host supports IDMAC in 32-bit address mode */
host->dma_64bit_address = 0;
dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
}
/* Alloc memory for sg translation */
host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
&host->sg_dma, GFP_KERNEL);
if (!host->sg_cpu) {
dev_err(host->dev, "%s: could not alloc DMA memory\n",
__func__);
goto no_dma;
}
/* Determine which DMA interface to use */
#ifdef CONFIG_MMC_DW_IDMAC
host->dma_ops = &dw_mci_idmac_ops;
dev_info(host->dev, "Using internal DMA controller.\n");
#endif
if (!host->dma_ops)
goto no_dma;
if (host->dma_ops->init && host->dma_ops->start &&
host->dma_ops->stop && host->dma_ops->cleanup) {
if (host->dma_ops->init(host)) {
dev_err(host->dev, "%s: Unable to initialize "
"DMA Controller.\n", __func__);
goto no_dma;
}
} else {
dev_err(host->dev, "DMA initialization not found.\n");
goto no_dma;
}
host->use_dma = 1;
return;
no_dma:
dev_info(host->dev, "Using PIO mode.\n");
host->use_dma = 0;
return;
}
static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
{
unsigned long timeout = jiffies + msecs_to_jiffies(500);
u32 ctrl;
ctrl = mci_readl(host, CTRL);
ctrl |= reset;
mci_writel(host, CTRL, ctrl);
/* wait till resets clear */
do {
ctrl = mci_readl(host, CTRL);
if (!(ctrl & reset))
return true;
} while (time_before(jiffies, timeout));
dev_err(host->dev,
"Timeout resetting block (ctrl reset %#x)\n",
ctrl & reset);
return false;
}
static bool dw_mci_reset(struct dw_mci *host)
{
u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
bool ret = false;
/*
* Reseting generates a block interrupt, hence setting
* the scatter-gather pointer to NULL.
*/
if (host->sg) {
sg_miter_stop(&host->sg_miter);
host->sg = NULL;
}
if (host->use_dma)
flags |= SDMMC_CTRL_DMA_RESET;
if (dw_mci_ctrl_reset(host, flags)) {
/*
* In all cases we clear the RAWINTS register to clear any
* interrupts.
*/
mci_writel(host, RINTSTS, 0xFFFFFFFF);
/* if using dma we wait for dma_req to clear */
if (host->use_dma) {
unsigned long timeout = jiffies + msecs_to_jiffies(500);
u32 status;
do {
status = mci_readl(host, STATUS);
if (!(status & SDMMC_STATUS_DMA_REQ))
break;
cpu_relax();
} while (time_before(jiffies, timeout));
if (status & SDMMC_STATUS_DMA_REQ) {
dev_err(host->dev,
"%s: Timeout waiting for dma_req to "
"clear during reset\n", __func__);
goto ciu_out;
}
/* when using DMA next we reset the fifo again */
if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
goto ciu_out;
}
} else {
/* if the controller reset bit did clear, then set clock regs */
if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
dev_err(host->dev, "%s: fifo/dma reset bits didn't "
"clear but ciu was reset, doing clock update\n",
__func__);
goto ciu_out;
}
}
#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
/* It is also recommended that we reset and reprogram idmac */
dw_mci_idmac_reset(host);
#endif
ret = true;
ciu_out:
/* After a CTRL reset we need to have CIU set clock registers */
mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
return ret;
}
#ifdef CONFIG_OF
static struct dw_mci_of_quirks {
char *quirk;
int id;
} of_quirks[] = {
{
.quirk = "broken-cd",
.id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
}, {
.quirk = "disable-wp",
.id = DW_MCI_QUIRK_NO_WRITE_PROTECT,
},
};
static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
{
struct dw_mci_board *pdata;
struct device *dev = host->dev;
struct device_node *np = dev->of_node;
const struct dw_mci_drv_data *drv_data = host->drv_data;
int idx, ret;
u32 clock_frequency;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(dev, "could not allocate memory for pdata\n");
return ERR_PTR(-ENOMEM);
}
/* find out number of slots supported */
if (of_property_read_u32(dev->of_node, "num-slots",
&pdata->num_slots)) {
dev_info(dev, "num-slots property not found, "
"assuming 1 slot is available\n");
pdata->num_slots = 1;
}
/* get quirks */
for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
if (of_get_property(np, of_quirks[idx].quirk, NULL))
pdata->quirks |= of_quirks[idx].id;
if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
dev_info(dev, "fifo-depth property not found, using "
"value of FIFOTH register as default\n");
of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
pdata->bus_hz = clock_frequency;
if (drv_data && drv_data->parse_dt) {
ret = drv_data->parse_dt(host);
if (ret)
return ERR_PTR(ret);
}
if (of_find_property(np, "supports-highspeed", NULL))
pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
return pdata;
}
#else /* CONFIG_OF */
static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
{
return ERR_PTR(-EINVAL);
}
#endif /* CONFIG_OF */
int dw_mci_probe(struct dw_mci *host)
{
const struct dw_mci_drv_data *drv_data = host->drv_data;
int width, i, ret = 0;
u32 fifo_size;
int init_slots = 0;
if (!host->pdata) {
host->pdata = dw_mci_parse_dt(host);
if (IS_ERR(host->pdata)) {
dev_err(host->dev, "platform data not available\n");
return -EINVAL;
}
}
if (host->pdata->num_slots > 1) {
dev_err(host->dev,
"Platform data must supply num_slots.\n");
return -ENODEV;
}
host->biu_clk = devm_clk_get(host->dev, "biu");
if (IS_ERR(host->biu_clk)) {
dev_dbg(host->dev, "biu clock not available\n");
} else {
ret = clk_prepare_enable(host->biu_clk);
if (ret) {
dev_err(host->dev, "failed to enable biu clock\n");
return ret;
}
}
host->ciu_clk = devm_clk_get(host->dev, "ciu");
if (IS_ERR(host->ciu_clk)) {
dev_dbg(host->dev, "ciu clock not available\n");
host->bus_hz = host->pdata->bus_hz;
} else {
ret = clk_prepare_enable(host->ciu_clk);
if (ret) {
dev_err(host->dev, "failed to enable ciu clock\n");
goto err_clk_biu;
}
if (host->pdata->bus_hz) {
ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
if (ret)
dev_warn(host->dev,
"Unable to set bus rate to %uHz\n",
host->pdata->bus_hz);
}
host->bus_hz = clk_get_rate(host->ciu_clk);
}
if (!host->bus_hz) {
dev_err(host->dev,
"Platform data must supply bus speed\n");
ret = -ENODEV;
goto err_clk_ciu;
}
if (drv_data && drv_data->init) {
ret = drv_data->init(host);
if (ret) {
dev_err(host->dev,
"implementation specific init failed\n");
goto err_clk_ciu;
}
}
if (drv_data && drv_data->setup_clock) {
ret = drv_data->setup_clock(host);
if (ret) {
dev_err(host->dev,
"implementation specific clock setup failed\n");
goto err_clk_ciu;
}
}
host->quirks = host->pdata->quirks;
spin_lock_init(&host->lock);
INIT_LIST_HEAD(&host->queue);
/*
* Get the host data width - this assumes that HCON has been set with
* the correct values.
*/
i = (mci_readl(host, HCON) >> 7) & 0x7;
if (!i) {
host->push_data = dw_mci_push_data16;
host->pull_data = dw_mci_pull_data16;
width = 16;
host->data_shift = 1;
} else if (i == 2) {
host->push_data = dw_mci_push_data64;
host->pull_data = dw_mci_pull_data64;
width = 64;
host->data_shift = 3;
} else {
/* Check for a reserved value, and warn if it is */
WARN((i != 1),
"HCON reports a reserved host data width!\n"
"Defaulting to 32-bit access.\n");
host->push_data = dw_mci_push_data32;
host->pull_data = dw_mci_pull_data32;
width = 32;
host->data_shift = 2;
}
/* Reset all blocks */
if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS))
return -ENODEV;
host->dma_ops = host->pdata->dma_ops;
dw_mci_init_dma(host);
/* Clear the interrupts for the host controller */
mci_writel(host, RINTSTS, 0xFFFFFFFF);
mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
/* Put in max timeout */
mci_writel(host, TMOUT, 0xFFFFFFFF);
/*
* FIFO threshold settings RxMark = fifo_size / 2 - 1,
* Tx Mark = fifo_size / 2 DMA Size = 8
*/
if (!host->pdata->fifo_depth) {
/*
* Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
* have been overwritten by the bootloader, just like we're
* about to do, so if you know the value for your hardware, you
* should put it in the platform data.
*/
fifo_size = mci_readl(host, FIFOTH);
fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
} else {
fifo_size = host->pdata->fifo_depth;
}
host->fifo_depth = fifo_size;
host->fifoth_val =
SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
mci_writel(host, FIFOTH, host->fifoth_val);
/* disable clock to CIU */
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
/*
* In 2.40a spec, Data offset is changed.
* Need to check the version-id and set data-offset for DATA register.
*/
host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
dev_info(host->dev, "Version ID is %04x\n", host->verid);
if (host->verid < DW_MMC_240A)
host->data_offset = DATA_OFFSET;
else
host->data_offset = DATA_240A_OFFSET;
tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
host->irq_flags, "dw-mci", host);
if (ret)
goto err_dmaunmap;
if (host->pdata->num_slots)
host->num_slots = host->pdata->num_slots;
else
host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
/*
* Enable interrupts for command done, data over, data empty, card det,
* receive ready and error such as transmit, receive timeout, crc error
*/
mci_writel(host, RINTSTS, 0xFFFFFFFF);
mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
SDMMC_INT_TXDR | SDMMC_INT_RXDR |
DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
dev_info(host->dev, "DW MMC controller at irq %d, "
"%d bit host data width, "
"%u deep fifo\n",
host->irq, width, fifo_size);
/* We need at least one slot to succeed */
for (i = 0; i < host->num_slots; i++) {
ret = dw_mci_init_slot(host, i);
if (ret)
dev_dbg(host->dev, "slot %d init failed\n", i);
else
init_slots++;
}
if (init_slots) {
dev_info(host->dev, "%d slots initialized\n", init_slots);
} else {
dev_dbg(host->dev, "attempted to initialize %d slots, "
"but failed on all\n", host->num_slots);
goto err_dmaunmap;
}
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
return 0;
err_dmaunmap:
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
err_clk_ciu:
if (!IS_ERR(host->ciu_clk))
clk_disable_unprepare(host->ciu_clk);
err_clk_biu:
if (!IS_ERR(host->biu_clk))
clk_disable_unprepare(host->biu_clk);
return ret;
}
EXPORT_SYMBOL(dw_mci_probe);
void dw_mci_remove(struct dw_mci *host)
{
int i;
mci_writel(host, RINTSTS, 0xFFFFFFFF);
mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
for (i = 0; i < host->num_slots; i++) {
dev_dbg(host->dev, "remove slot %d\n", i);
if (host->slot[i])
dw_mci_cleanup_slot(host->slot[i], i);
}
/* disable clock to CIU */
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
if (!IS_ERR(host->ciu_clk))
clk_disable_unprepare(host->ciu_clk);
if (!IS_ERR(host->biu_clk))
clk_disable_unprepare(host->biu_clk);
}
EXPORT_SYMBOL(dw_mci_remove);
#ifdef CONFIG_PM_SLEEP
/*
* TODO: we should probably disable the clock to the card in the suspend path.
*/
int dw_mci_suspend(struct dw_mci *host)
{
return 0;
}
EXPORT_SYMBOL(dw_mci_suspend);
int dw_mci_resume(struct dw_mci *host)
{
int i, ret;
if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
ret = -ENODEV;
return ret;
}
if (host->use_dma && host->dma_ops->init)
host->dma_ops->init(host);
/*
* Restore the initial value at FIFOTH register
* And Invalidate the prev_blksz with zero
*/
mci_writel(host, FIFOTH, host->fifoth_val);
host->prev_blksz = 0;
/* Put in max timeout */
mci_writel(host, TMOUT, 0xFFFFFFFF);
mci_writel(host, RINTSTS, 0xFFFFFFFF);
mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
SDMMC_INT_TXDR | SDMMC_INT_RXDR |
DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
for (i = 0; i < host->num_slots; i++) {
struct dw_mci_slot *slot = host->slot[i];
if (!slot)
continue;
if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
dw_mci_setup_bus(slot, true);
}
}
return 0;
}
EXPORT_SYMBOL(dw_mci_resume);
#endif /* CONFIG_PM_SLEEP */
static int __init dw_mci_init(void)
{
pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
return 0;
}
static void __exit dw_mci_exit(void)
{
}
module_init(dw_mci_init);
module_exit(dw_mci_exit);
MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
MODULE_AUTHOR("NXP Semiconductor VietNam");
MODULE_AUTHOR("Imagination Technologies Ltd");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink