forked from Minki/linux
53e5f36fbd
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Vittorio Zecca <zeccav@gmail.com> Tested-by: Vittorio Zecca <zeccav@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|---|---|---|
| .. | ||
| atm | ||
| c67x00 | ||
| chipidea | ||
| class | ||
| common | ||
| core | ||
| dwc2 | ||
| dwc3 | ||
| early | ||
| gadget | ||
| host | ||
| image | ||
| isp1760 | ||
| misc | ||
| mon | ||
| musb | ||
| phy | ||
| renesas_usbhs | ||
| serial | ||
| storage | ||
| usbip | ||
| wusbcore | ||
| Kconfig | ||
| Makefile | ||
| README | ||
| usb-skeleton.c | ||
To understand all the Linux-USB framework, you'll use these resources:
* This source code. This is necessarily an evolving work, and
includes kerneldoc that should help you get a current overview.
("make pdfdocs", and then look at "usb.pdf" for host side and
"gadget.pdf" for peripheral side.) Also, Documentation/usb has
more information.
* The USB 2.0 specification (from www.usb.org), with supplements
such as those for USB OTG and the various device classes.
The USB specification has a good overview chapter, and USB
peripherals conform to the widely known "Chapter 9".
* Chip specifications for USB controllers. Examples include
host controllers (on PCs, servers, and more); peripheral
controllers (in devices with Linux firmware, like printers or
cell phones); and hard-wired peripherals like Ethernet adapters.
* Specifications for other protocols implemented by USB peripheral
functions. Some are vendor-specific; others are vendor-neutral
but just standardized outside of the www.usb.org team.
Here is a list of what each subdirectory here is, and what is contained in
them.
core/ - This is for the core USB host code, including the
usbfs files and the hub class driver ("hub_wq").
host/ - This is for USB host controller drivers. This
includes UHCI, OHCI, EHCI, and others that might
be used with more specialized "embedded" systems.
gadget/ - This is for USB peripheral controller drivers and
the various gadget drivers which talk to them.
Individual USB driver directories. A new driver should be added to the
first subdirectory in the list below that it fits into.
image/ - This is for still image drivers, like scanners or
digital cameras.
../input/ - This is for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
../media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
../net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
into any of the above categories, and work for a range
of USB Class specified devices.
misc/ - This is for all USB device drivers that do not fit
into any of the above categories.