forked from Minki/linux
d134c48d88
Following changes that appeared in lk 4.0.0, the gadget udc driver for
some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families)
incorrectly deduced full-speed USB link speed even when the hardware
had negotiated a high-speed link. The fix is to make sure that the
UDPHS Interrupt Enable Register value does not mask the SPEED bit
in the Interrupt Status Register.
For a mass storage gadget this problem lead to failures when the host
had a USB 3 port with the xhci_hcd driver. If the host was a USB 2
port using the ehci_hcd driver then the mass storage gadget worked
(but probably at a lower speed than it should have).
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> #4.0+
Fixes:
|
||
|---|---|---|
| .. | ||
| function | ||
| legacy | ||
| udc | ||
| composite.c | ||
| config.c | ||
| configfs.c | ||
| configfs.h | ||
| epautoconf.c | ||
| functions.c | ||
| Kconfig | ||
| Makefile | ||
| u_f.c | ||
| u_f.h | ||
| u_os_desc.h | ||
| usbstring.c | ||