forked from Minki/linux
a00cebf51d
At some point I added the "Low" entry at the beginning of the array
without bumping the enumeration count from 9 to 10. Fix this. While at
it, fix the anti-pattern for the other enumeration (used by MUX{1,2}).
Fixes: aa43112445
("ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
456 lines
13 KiB
C
456 lines
13 KiB
C
/*
|
|
* TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec
|
|
*
|
|
* Copyright (C) 2016 Axentia Technologies AB
|
|
*
|
|
* Author: Peter Rosin <peda@axentia.se>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* loop1 relays
|
|
* IN1 +---o +------------+ o---+ OUT1
|
|
* \ /
|
|
* + +
|
|
* | / |
|
|
* +--o +--. |
|
|
* | add | |
|
|
* | V |
|
|
* | .---. |
|
|
* DAC +----------->|Sum|---+
|
|
* | '---' |
|
|
* | |
|
|
* + +
|
|
*
|
|
* IN2 +---o--+------------+--o---+ OUT2
|
|
* loop2 relays
|
|
*
|
|
* The 'loop1' gpio pin controlls two relays, which are either in loop
|
|
* position, meaning that input and output are directly connected, or
|
|
* they are in mixer position, meaning that the signal is passed through
|
|
* the 'Sum' mixer. Similarly for 'loop2'.
|
|
*
|
|
* In the above, the 'loop1' relays are inactive, thus feeding IN1 to the
|
|
* mixer (if 'add' is active) and feeding the mixer output to OUT1. The
|
|
* 'loop2' relays are active, short-cutting the TSE-850 from channel 2.
|
|
* IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name
|
|
* of the (filtered) output from the PCM5142 codec.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <sound/soc.h>
|
|
#include <sound/pcm_params.h>
|
|
|
|
struct tse850_priv {
|
|
struct gpio_desc *add;
|
|
struct gpio_desc *loop1;
|
|
struct gpio_desc *loop2;
|
|
|
|
struct regulator *ana;
|
|
|
|
int add_cache;
|
|
int loop1_cache;
|
|
int loop2_cache;
|
|
};
|
|
|
|
static int tse850_get_mux1(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
|
|
ucontrol->value.enumerated.item[0] = tse850->loop1_cache;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tse850_put_mux1(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
|
|
unsigned int val = ucontrol->value.enumerated.item[0];
|
|
|
|
if (val >= e->items)
|
|
return -EINVAL;
|
|
|
|
gpiod_set_value_cansleep(tse850->loop1, val);
|
|
tse850->loop1_cache = val;
|
|
|
|
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
|
|
}
|
|
|
|
static int tse850_get_mux2(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
|
|
ucontrol->value.enumerated.item[0] = tse850->loop2_cache;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tse850_put_mux2(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
|
|
unsigned int val = ucontrol->value.enumerated.item[0];
|
|
|
|
if (val >= e->items)
|
|
return -EINVAL;
|
|
|
|
gpiod_set_value_cansleep(tse850->loop2, val);
|
|
tse850->loop2_cache = val;
|
|
|
|
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
|
|
}
|
|
|
|
int tse850_get_mix(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
|
|
ucontrol->value.enumerated.item[0] = tse850->add_cache;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tse850_put_mix(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
int connect = !!ucontrol->value.integer.value[0];
|
|
|
|
if (tse850->add_cache == connect)
|
|
return 0;
|
|
|
|
/*
|
|
* Hmmm, this gpiod_set_value_cansleep call should probably happen
|
|
* inside snd_soc_dapm_mixer_update_power in the loop.
|
|
*/
|
|
gpiod_set_value_cansleep(tse850->add, connect);
|
|
tse850->add_cache = connect;
|
|
|
|
snd_soc_dapm_mixer_update_power(dapm, kctrl, connect, NULL);
|
|
return 1;
|
|
}
|
|
|
|
int tse850_get_ana(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
int ret;
|
|
|
|
ret = regulator_get_voltage(tse850->ana);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Map regulator output values like so:
|
|
* -11.5V to "Low" (enum 0)
|
|
* 11.5V-12.5V to "12V" (enum 1)
|
|
* 12.5V-13.5V to "13V" (enum 2)
|
|
* ...
|
|
* 18.5V-19.5V to "19V" (enum 8)
|
|
* 19.5V- to "20V" (enum 9)
|
|
*/
|
|
if (ret < 11000000)
|
|
ret = 11000000;
|
|
else if (ret > 20000000)
|
|
ret = 20000000;
|
|
ret -= 11000000;
|
|
ret = (ret + 500000) / 1000000;
|
|
|
|
ucontrol->value.enumerated.item[0] = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tse850_put_ana(struct snd_kcontrol *kctrl,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
|
|
struct snd_soc_card *card = dapm->card;
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
|
|
unsigned int uV = ucontrol->value.enumerated.item[0];
|
|
int ret;
|
|
|
|
if (uV >= e->items)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Map enum zero (Low) to 2 volts on the regulator, do this since
|
|
* the ana regulator is supplied by the system 12V voltage and
|
|
* requesting anything below the system voltage causes the system
|
|
* voltage to be passed through the regulator. Also, the ana
|
|
* regulator induces noise when requesting voltages near the
|
|
* system voltage. So, by mapping Low to 2V, that noise is
|
|
* eliminated when all that is needed is 12V (the system voltage).
|
|
*/
|
|
if (uV)
|
|
uV = 11000000 + (1000000 * uV);
|
|
else
|
|
uV = 2000000;
|
|
|
|
ret = regulator_set_voltage(tse850->ana, uV, uV);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
|
|
}
|
|
|
|
static const char * const mux_text[] = { "Mixer", "Loop" };
|
|
|
|
static const struct soc_enum mux_enum =
|
|
SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, ARRAY_SIZE(mux_text), mux_text);
|
|
|
|
static const struct snd_kcontrol_new mux1 =
|
|
SOC_DAPM_ENUM_EXT("MUX1", mux_enum, tse850_get_mux1, tse850_put_mux1);
|
|
|
|
static const struct snd_kcontrol_new mux2 =
|
|
SOC_DAPM_ENUM_EXT("MUX2", mux_enum, tse850_get_mux2, tse850_put_mux2);
|
|
|
|
#define TSE850_DAPM_SINGLE_EXT(xname, reg, shift, max, invert, xget, xput) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_soc_info_volsw, \
|
|
.get = xget, \
|
|
.put = xput, \
|
|
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) }
|
|
|
|
static const struct snd_kcontrol_new mix[] = {
|
|
TSE850_DAPM_SINGLE_EXT("IN Switch", SND_SOC_NOPM, 0, 1, 0,
|
|
tse850_get_mix, tse850_put_mix),
|
|
};
|
|
|
|
static const char * const ana_text[] = {
|
|
"Low", "12V", "13V", "14V", "15V", "16V", "17V", "18V", "19V", "20V"
|
|
};
|
|
|
|
static const struct soc_enum ana_enum =
|
|
SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, ARRAY_SIZE(ana_text), ana_text);
|
|
|
|
static const struct snd_kcontrol_new out =
|
|
SOC_DAPM_ENUM_EXT("ANA", ana_enum, tse850_get_ana, tse850_put_ana);
|
|
|
|
static const struct snd_soc_dapm_widget tse850_dapm_widgets[] = {
|
|
SND_SOC_DAPM_LINE("OUT1", NULL),
|
|
SND_SOC_DAPM_LINE("OUT2", NULL),
|
|
SND_SOC_DAPM_LINE("IN1", NULL),
|
|
SND_SOC_DAPM_LINE("IN2", NULL),
|
|
SND_SOC_DAPM_INPUT("DAC"),
|
|
SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
|
|
SOC_MIXER_ARRAY("MIX", SND_SOC_NOPM, 0, 0, mix),
|
|
SND_SOC_DAPM_MUX("MUX1", SND_SOC_NOPM, 0, 0, &mux1),
|
|
SND_SOC_DAPM_MUX("MUX2", SND_SOC_NOPM, 0, 0, &mux2),
|
|
SND_SOC_DAPM_OUT_DRV("OUT", SND_SOC_NOPM, 0, 0, &out, 1),
|
|
};
|
|
|
|
/*
|
|
* These connections are not entirely correct, since both IN1 and IN2
|
|
* are always fed to MIX (if the "IN switch" is set so), i.e. without
|
|
* regard to the loop1 and loop2 relays that according to this only
|
|
* control MUX1 and MUX2 but in fact also control how the input signals
|
|
* are routed.
|
|
* But, 1) I don't know how to do it right, and 2) it doesn't seem to
|
|
* matter in practice since nothing is powered in those sections anyway.
|
|
*/
|
|
static const struct snd_soc_dapm_route tse850_intercon[] = {
|
|
{ "OUT1", NULL, "MUX1" },
|
|
{ "OUT2", NULL, "MUX2" },
|
|
|
|
{ "MUX1", "Loop", "IN1" },
|
|
{ "MUX1", "Mixer", "OUT" },
|
|
|
|
{ "MUX2", "Loop", "IN2" },
|
|
{ "MUX2", "Mixer", "OUT" },
|
|
|
|
{ "OUT", NULL, "MIX" },
|
|
|
|
{ "MIX", NULL, "DAC" },
|
|
{ "MIX", "IN Switch", "IN1" },
|
|
{ "MIX", "IN Switch", "IN2" },
|
|
|
|
/* connect board input to the codec left channel output pin */
|
|
{ "DAC", NULL, "OUTL" },
|
|
};
|
|
|
|
static struct snd_soc_dai_link tse850_dailink = {
|
|
.name = "TSE-850",
|
|
.stream_name = "TSE-850-PCM",
|
|
.codec_dai_name = "pcm512x-hifi",
|
|
.dai_fmt = SND_SOC_DAIFMT_I2S
|
|
| SND_SOC_DAIFMT_NB_NF
|
|
| SND_SOC_DAIFMT_CBM_CFS,
|
|
};
|
|
|
|
static struct snd_soc_card tse850_card = {
|
|
.name = "TSE-850-ASoC",
|
|
.owner = THIS_MODULE,
|
|
.dai_link = &tse850_dailink,
|
|
.num_links = 1,
|
|
.dapm_widgets = tse850_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(tse850_dapm_widgets),
|
|
.dapm_routes = tse850_intercon,
|
|
.num_dapm_routes = ARRAY_SIZE(tse850_intercon),
|
|
.fully_routed = true,
|
|
};
|
|
|
|
static int tse850_dt_init(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *codec_np, *cpu_np;
|
|
struct snd_soc_dai_link *dailink = &tse850_dailink;
|
|
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "only device tree supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
cpu_np = of_parse_phandle(np, "axentia,cpu-dai", 0);
|
|
if (!cpu_np) {
|
|
dev_err(&pdev->dev, "failed to get cpu dai\n");
|
|
return -EINVAL;
|
|
}
|
|
dailink->cpu_of_node = cpu_np;
|
|
dailink->platform_of_node = cpu_np;
|
|
of_node_put(cpu_np);
|
|
|
|
codec_np = of_parse_phandle(np, "axentia,audio-codec", 0);
|
|
if (!codec_np) {
|
|
dev_err(&pdev->dev, "failed to get codec info\n");
|
|
return -EINVAL;
|
|
}
|
|
dailink->codec_of_node = codec_np;
|
|
of_node_put(codec_np);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tse850_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_card *card = &tse850_card;
|
|
struct device *dev = card->dev = &pdev->dev;
|
|
struct tse850_priv *tse850;
|
|
int ret;
|
|
|
|
tse850 = devm_kzalloc(dev, sizeof(*tse850), GFP_KERNEL);
|
|
if (!tse850)
|
|
return -ENOMEM;
|
|
|
|
snd_soc_card_set_drvdata(card, tse850);
|
|
|
|
ret = tse850_dt_init(pdev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to init dt info\n");
|
|
return ret;
|
|
}
|
|
|
|
tse850->add = devm_gpiod_get(dev, "axentia,add", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(tse850->add)) {
|
|
if (PTR_ERR(tse850->add) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get 'add' gpio\n");
|
|
return PTR_ERR(tse850->add);
|
|
}
|
|
tse850->add_cache = 1;
|
|
|
|
tse850->loop1 = devm_gpiod_get(dev, "axentia,loop1", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(tse850->loop1)) {
|
|
if (PTR_ERR(tse850->loop1) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get 'loop1' gpio\n");
|
|
return PTR_ERR(tse850->loop1);
|
|
}
|
|
tse850->loop1_cache = 1;
|
|
|
|
tse850->loop2 = devm_gpiod_get(dev, "axentia,loop2", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(tse850->loop2)) {
|
|
if (PTR_ERR(tse850->loop2) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get 'loop2' gpio\n");
|
|
return PTR_ERR(tse850->loop2);
|
|
}
|
|
tse850->loop2_cache = 1;
|
|
|
|
tse850->ana = devm_regulator_get(dev, "axentia,ana");
|
|
if (IS_ERR(tse850->ana)) {
|
|
if (PTR_ERR(tse850->ana) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get 'ana' regulator\n");
|
|
return PTR_ERR(tse850->ana);
|
|
}
|
|
|
|
ret = regulator_enable(tse850->ana);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to enable the 'ana' regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = snd_soc_register_card(card);
|
|
if (ret) {
|
|
dev_err(dev, "snd_soc_register_card failed\n");
|
|
goto err_disable_ana;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_ana:
|
|
regulator_disable(tse850->ana);
|
|
return ret;
|
|
}
|
|
|
|
static int tse850_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_card *card = platform_get_drvdata(pdev);
|
|
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
|
|
|
|
snd_soc_unregister_card(card);
|
|
regulator_disable(tse850->ana);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id tse850_dt_ids[] = {
|
|
{ .compatible = "axentia,tse850-pcm5142", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tse850_dt_ids);
|
|
|
|
static struct platform_driver tse850_driver = {
|
|
.driver = {
|
|
.name = "axentia-tse850-pcm5142",
|
|
.of_match_table = of_match_ptr(tse850_dt_ids),
|
|
},
|
|
.probe = tse850_probe,
|
|
.remove = tse850_remove,
|
|
};
|
|
|
|
module_platform_driver(tse850_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
|
|
MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec");
|
|
MODULE_LICENSE("GPL");
|