forked from Minki/linux
a85787edaa
When this driver masters BCLK and/or LRCLK, and noone has stated differently, assume that all the bits of a frame are used. This relieves the cpu dai users from the duty to fill in the dividers for the common case. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
1084 lines
29 KiB
C
1084 lines
29 KiB
C
/*
|
|
* atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver
|
|
*
|
|
* Copyright (C) 2005 SAN People
|
|
* Copyright (C) 2008 Atmel
|
|
*
|
|
* Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
|
|
* ATMEL CORP.
|
|
*
|
|
* Based on at91-ssc.c by
|
|
* Frank Mandarino <fmandarino@endrelia.com>
|
|
* Based on pxa2xx Platform drivers by
|
|
* Liam Girdwood <lrg@slimlogic.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/atmel_pdc.h>
|
|
|
|
#include <linux/atmel-ssc.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include "atmel-pcm.h"
|
|
#include "atmel_ssc_dai.h"
|
|
|
|
|
|
#define NUM_SSC_DEVICES 3
|
|
|
|
/*
|
|
* SSC PDC registers required by the PCM DMA engine.
|
|
*/
|
|
static struct atmel_pdc_regs pdc_tx_reg = {
|
|
.xpr = ATMEL_PDC_TPR,
|
|
.xcr = ATMEL_PDC_TCR,
|
|
.xnpr = ATMEL_PDC_TNPR,
|
|
.xncr = ATMEL_PDC_TNCR,
|
|
};
|
|
|
|
static struct atmel_pdc_regs pdc_rx_reg = {
|
|
.xpr = ATMEL_PDC_RPR,
|
|
.xcr = ATMEL_PDC_RCR,
|
|
.xnpr = ATMEL_PDC_RNPR,
|
|
.xncr = ATMEL_PDC_RNCR,
|
|
};
|
|
|
|
/*
|
|
* SSC & PDC status bits for transmit and receive.
|
|
*/
|
|
static struct atmel_ssc_mask ssc_tx_mask = {
|
|
.ssc_enable = SSC_BIT(CR_TXEN),
|
|
.ssc_disable = SSC_BIT(CR_TXDIS),
|
|
.ssc_endx = SSC_BIT(SR_ENDTX),
|
|
.ssc_endbuf = SSC_BIT(SR_TXBUFE),
|
|
.ssc_error = SSC_BIT(SR_OVRUN),
|
|
.pdc_enable = ATMEL_PDC_TXTEN,
|
|
.pdc_disable = ATMEL_PDC_TXTDIS,
|
|
};
|
|
|
|
static struct atmel_ssc_mask ssc_rx_mask = {
|
|
.ssc_enable = SSC_BIT(CR_RXEN),
|
|
.ssc_disable = SSC_BIT(CR_RXDIS),
|
|
.ssc_endx = SSC_BIT(SR_ENDRX),
|
|
.ssc_endbuf = SSC_BIT(SR_RXBUFF),
|
|
.ssc_error = SSC_BIT(SR_OVRUN),
|
|
.pdc_enable = ATMEL_PDC_RXTEN,
|
|
.pdc_disable = ATMEL_PDC_RXTDIS,
|
|
};
|
|
|
|
|
|
/*
|
|
* DMA parameters.
|
|
*/
|
|
static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
|
|
{{
|
|
.name = "SSC0 PCM out",
|
|
.pdc = &pdc_tx_reg,
|
|
.mask = &ssc_tx_mask,
|
|
},
|
|
{
|
|
.name = "SSC0 PCM in",
|
|
.pdc = &pdc_rx_reg,
|
|
.mask = &ssc_rx_mask,
|
|
} },
|
|
{{
|
|
.name = "SSC1 PCM out",
|
|
.pdc = &pdc_tx_reg,
|
|
.mask = &ssc_tx_mask,
|
|
},
|
|
{
|
|
.name = "SSC1 PCM in",
|
|
.pdc = &pdc_rx_reg,
|
|
.mask = &ssc_rx_mask,
|
|
} },
|
|
{{
|
|
.name = "SSC2 PCM out",
|
|
.pdc = &pdc_tx_reg,
|
|
.mask = &ssc_tx_mask,
|
|
},
|
|
{
|
|
.name = "SSC2 PCM in",
|
|
.pdc = &pdc_rx_reg,
|
|
.mask = &ssc_rx_mask,
|
|
} },
|
|
};
|
|
|
|
|
|
static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
|
|
{
|
|
.name = "ssc0",
|
|
.lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
|
|
.dir_mask = SSC_DIR_MASK_UNUSED,
|
|
.initialized = 0,
|
|
},
|
|
{
|
|
.name = "ssc1",
|
|
.lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
|
|
.dir_mask = SSC_DIR_MASK_UNUSED,
|
|
.initialized = 0,
|
|
},
|
|
{
|
|
.name = "ssc2",
|
|
.lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
|
|
.dir_mask = SSC_DIR_MASK_UNUSED,
|
|
.initialized = 0,
|
|
},
|
|
};
|
|
|
|
|
|
/*
|
|
* SSC interrupt handler. Passes PDC interrupts to the DMA
|
|
* interrupt handler in the PCM driver.
|
|
*/
|
|
static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct atmel_ssc_info *ssc_p = dev_id;
|
|
struct atmel_pcm_dma_params *dma_params;
|
|
u32 ssc_sr;
|
|
u32 ssc_substream_mask;
|
|
int i;
|
|
|
|
ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
|
|
& (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
|
|
|
|
/*
|
|
* Loop through the substreams attached to this SSC. If
|
|
* a DMA-related interrupt occurred on that substream, call
|
|
* the DMA interrupt handler function, if one has been
|
|
* registered in the dma_params structure by the PCM driver.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
|
|
dma_params = ssc_p->dma_params[i];
|
|
|
|
if ((dma_params != NULL) &&
|
|
(dma_params->dma_intr_handler != NULL)) {
|
|
ssc_substream_mask = (dma_params->mask->ssc_endx |
|
|
dma_params->mask->ssc_endbuf);
|
|
if (ssc_sr & ssc_substream_mask) {
|
|
dma_params->dma_intr_handler(ssc_sr,
|
|
dma_params->
|
|
substream);
|
|
}
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* When the bit clock is input, limit the maximum rate according to the
|
|
* Serial Clock Ratio Considerations section from the SSC documentation:
|
|
*
|
|
* The Transmitter and the Receiver can be programmed to operate
|
|
* with the clock signals provided on either the TK or RK pins.
|
|
* This allows the SSC to support many slave-mode data transfers.
|
|
* In this case, the maximum clock speed allowed on the RK pin is:
|
|
* - Peripheral clock divided by 2 if Receiver Frame Synchro is input
|
|
* - Peripheral clock divided by 3 if Receiver Frame Synchro is output
|
|
* In addition, the maximum clock speed allowed on the TK pin is:
|
|
* - Peripheral clock divided by 6 if Transmit Frame Synchro is input
|
|
* - Peripheral clock divided by 2 if Transmit Frame Synchro is output
|
|
*
|
|
* When the bit clock is output, limit the rate according to the
|
|
* SSC divider restrictions.
|
|
*/
|
|
static int atmel_ssc_hw_rule_rate(struct snd_pcm_hw_params *params,
|
|
struct snd_pcm_hw_rule *rule)
|
|
{
|
|
struct atmel_ssc_info *ssc_p = rule->private;
|
|
struct ssc_device *ssc = ssc_p->ssc;
|
|
struct snd_interval *i = hw_param_interval(params, rule->var);
|
|
struct snd_interval t;
|
|
struct snd_ratnum r = {
|
|
.den_min = 1,
|
|
.den_max = 4095,
|
|
.den_step = 1,
|
|
};
|
|
unsigned int num = 0, den = 0;
|
|
int frame_size;
|
|
int mck_div = 2;
|
|
int ret;
|
|
|
|
frame_size = snd_soc_params_to_frame_size(params);
|
|
if (frame_size < 0)
|
|
return frame_size;
|
|
|
|
switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
if ((ssc_p->dir_mask & SSC_DIR_MASK_CAPTURE)
|
|
&& ssc->clk_from_rk_pin)
|
|
/* Receiver Frame Synchro (i.e. capture)
|
|
* is output (format is _CFS) and the RK pin
|
|
* is used for input (format is _CBM_).
|
|
*/
|
|
mck_div = 3;
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
if ((ssc_p->dir_mask & SSC_DIR_MASK_PLAYBACK)
|
|
&& !ssc->clk_from_rk_pin)
|
|
/* Transmit Frame Synchro (i.e. playback)
|
|
* is input (format is _CFM) and the TK pin
|
|
* is used for input (format _CBM_ but not
|
|
* using the RK pin).
|
|
*/
|
|
mck_div = 6;
|
|
break;
|
|
}
|
|
|
|
switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
r.num = ssc_p->mck_rate / mck_div / frame_size;
|
|
|
|
ret = snd_interval_ratnum(i, 1, &r, &num, &den);
|
|
if (ret >= 0 && den && rule->var == SNDRV_PCM_HW_PARAM_RATE) {
|
|
params->rate_num = num;
|
|
params->rate_den = den;
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
t.min = 8000;
|
|
t.max = ssc_p->mck_rate / mck_div / frame_size;
|
|
t.openmin = t.openmax = 0;
|
|
t.integer = 0;
|
|
ret = snd_interval_refine(i, &t);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*\
|
|
* DAI functions
|
|
\*-------------------------------------------------------------------------*/
|
|
/*
|
|
* Startup. Only that one substream allowed in each direction.
|
|
*/
|
|
static int atmel_ssc_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dai->dev);
|
|
struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
|
|
struct atmel_pcm_dma_params *dma_params;
|
|
int dir, dir_mask;
|
|
int ret;
|
|
|
|
pr_debug("atmel_ssc_startup: SSC_SR=0x%x\n",
|
|
ssc_readl(ssc_p->ssc->regs, SR));
|
|
|
|
/* Enable PMC peripheral clock for this SSC */
|
|
pr_debug("atmel_ssc_dai: Starting clock\n");
|
|
clk_enable(ssc_p->ssc->clk);
|
|
ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
|
|
|
|
/* Reset the SSC unless initialized to keep it in a clean state */
|
|
if (!ssc_p->initialized)
|
|
ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
dir = 0;
|
|
dir_mask = SSC_DIR_MASK_PLAYBACK;
|
|
} else {
|
|
dir = 1;
|
|
dir_mask = SSC_DIR_MASK_CAPTURE;
|
|
}
|
|
|
|
ret = snd_pcm_hw_rule_add(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
atmel_ssc_hw_rule_rate,
|
|
ssc_p,
|
|
SNDRV_PCM_HW_PARAM_FRAME_BITS,
|
|
SNDRV_PCM_HW_PARAM_CHANNELS, -1);
|
|
if (ret < 0) {
|
|
dev_err(dai->dev, "Failed to specify rate rule: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dma_params = &ssc_dma_params[pdev->id][dir];
|
|
dma_params->ssc = ssc_p->ssc;
|
|
dma_params->substream = substream;
|
|
|
|
ssc_p->dma_params[dir] = dma_params;
|
|
|
|
snd_soc_dai_set_dma_data(dai, substream, dma_params);
|
|
|
|
spin_lock_irq(&ssc_p->lock);
|
|
if (ssc_p->dir_mask & dir_mask) {
|
|
spin_unlock_irq(&ssc_p->lock);
|
|
return -EBUSY;
|
|
}
|
|
ssc_p->dir_mask |= dir_mask;
|
|
spin_unlock_irq(&ssc_p->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Shutdown. Clear DMA parameters and shutdown the SSC if there
|
|
* are no other substreams open.
|
|
*/
|
|
static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dai->dev);
|
|
struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
|
|
struct atmel_pcm_dma_params *dma_params;
|
|
int dir, dir_mask;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
dir = 0;
|
|
else
|
|
dir = 1;
|
|
|
|
dma_params = ssc_p->dma_params[dir];
|
|
|
|
if (dma_params != NULL) {
|
|
dma_params->ssc = NULL;
|
|
dma_params->substream = NULL;
|
|
ssc_p->dma_params[dir] = NULL;
|
|
}
|
|
|
|
dir_mask = 1 << dir;
|
|
|
|
spin_lock_irq(&ssc_p->lock);
|
|
ssc_p->dir_mask &= ~dir_mask;
|
|
if (!ssc_p->dir_mask) {
|
|
if (ssc_p->initialized) {
|
|
free_irq(ssc_p->ssc->irq, ssc_p);
|
|
ssc_p->initialized = 0;
|
|
}
|
|
|
|
/* Reset the SSC */
|
|
ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
|
|
/* Clear the SSC dividers */
|
|
ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
|
|
ssc_p->forced_divider = 0;
|
|
}
|
|
spin_unlock_irq(&ssc_p->lock);
|
|
|
|
/* Shutdown the SSC clock. */
|
|
pr_debug("atmel_ssc_dai: Stopping clock\n");
|
|
clk_disable(ssc_p->ssc->clk);
|
|
}
|
|
|
|
|
|
/*
|
|
* Record the DAI format for use in hw_params().
|
|
*/
|
|
static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(cpu_dai->dev);
|
|
struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
|
|
|
|
ssc_p->daifmt = fmt;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Record SSC clock dividers for use in hw_params().
|
|
*/
|
|
static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
|
|
int div_id, int div)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(cpu_dai->dev);
|
|
struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
|
|
|
|
switch (div_id) {
|
|
case ATMEL_SSC_CMR_DIV:
|
|
/*
|
|
* The same master clock divider is used for both
|
|
* transmit and receive, so if a value has already
|
|
* been set, it must match this value.
|
|
*/
|
|
if (ssc_p->dir_mask !=
|
|
(SSC_DIR_MASK_PLAYBACK | SSC_DIR_MASK_CAPTURE))
|
|
ssc_p->cmr_div = div;
|
|
else if (ssc_p->cmr_div == 0)
|
|
ssc_p->cmr_div = div;
|
|
else
|
|
if (div != ssc_p->cmr_div)
|
|
return -EBUSY;
|
|
ssc_p->forced_divider |= BIT(ATMEL_SSC_CMR_DIV);
|
|
break;
|
|
|
|
case ATMEL_SSC_TCMR_PERIOD:
|
|
ssc_p->tcmr_period = div;
|
|
ssc_p->forced_divider |= BIT(ATMEL_SSC_TCMR_PERIOD);
|
|
break;
|
|
|
|
case ATMEL_SSC_RCMR_PERIOD:
|
|
ssc_p->rcmr_period = div;
|
|
ssc_p->forced_divider |= BIT(ATMEL_SSC_RCMR_PERIOD);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Is the cpu-dai master of the frame clock? */
|
|
static int atmel_ssc_cfs(struct atmel_ssc_info *ssc_p)
|
|
{
|
|
switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Is the cpu-dai master of the bit clock? */
|
|
static int atmel_ssc_cbs(struct atmel_ssc_info *ssc_p)
|
|
{
|
|
switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure the SSC.
|
|
*/
|
|
static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dai->dev);
|
|
int id = pdev->id;
|
|
struct atmel_ssc_info *ssc_p = &ssc_info[id];
|
|
struct ssc_device *ssc = ssc_p->ssc;
|
|
struct atmel_pcm_dma_params *dma_params;
|
|
int dir, channels, bits;
|
|
u32 tfmr, rfmr, tcmr, rcmr;
|
|
int ret;
|
|
int fslen, fslen_ext;
|
|
u32 cmr_div;
|
|
u32 tcmr_period;
|
|
u32 rcmr_period;
|
|
|
|
/*
|
|
* Currently, there is only one set of dma params for
|
|
* each direction. If more are added, this code will
|
|
* have to be changed to select the proper set.
|
|
*/
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
dir = 0;
|
|
else
|
|
dir = 1;
|
|
|
|
/*
|
|
* If the cpu dai should provide BCLK, but noone has provided the
|
|
* divider needed for that to work, fall back to something sensible.
|
|
*/
|
|
cmr_div = ssc_p->cmr_div;
|
|
if (!(ssc_p->forced_divider & BIT(ATMEL_SSC_CMR_DIV)) &&
|
|
atmel_ssc_cbs(ssc_p)) {
|
|
int bclk_rate = snd_soc_params_to_bclk(params);
|
|
|
|
if (bclk_rate < 0) {
|
|
dev_err(dai->dev, "unable to calculate cmr_div: %d\n",
|
|
bclk_rate);
|
|
return bclk_rate;
|
|
}
|
|
|
|
cmr_div = DIV_ROUND_CLOSEST(ssc_p->mck_rate, 2 * bclk_rate);
|
|
}
|
|
|
|
/*
|
|
* If the cpu dai should provide LRCLK, but noone has provided the
|
|
* dividers needed for that to work, fall back to something sensible.
|
|
*/
|
|
tcmr_period = ssc_p->tcmr_period;
|
|
rcmr_period = ssc_p->rcmr_period;
|
|
if (atmel_ssc_cfs(ssc_p)) {
|
|
int frame_size = snd_soc_params_to_frame_size(params);
|
|
|
|
if (frame_size < 0) {
|
|
dev_err(dai->dev,
|
|
"unable to calculate tx/rx cmr_period: %d\n",
|
|
frame_size);
|
|
return frame_size;
|
|
}
|
|
|
|
if (!(ssc_p->forced_divider & BIT(ATMEL_SSC_TCMR_PERIOD)))
|
|
tcmr_period = frame_size / 2 - 1;
|
|
if (!(ssc_p->forced_divider & BIT(ATMEL_SSC_RCMR_PERIOD)))
|
|
rcmr_period = frame_size / 2 - 1;
|
|
}
|
|
|
|
dma_params = ssc_p->dma_params[dir];
|
|
|
|
channels = params_channels(params);
|
|
|
|
/*
|
|
* Determine sample size in bits and the PDC increment.
|
|
*/
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S8:
|
|
bits = 8;
|
|
dma_params->pdc_xfer_size = 1;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
bits = 16;
|
|
dma_params->pdc_xfer_size = 2;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
bits = 24;
|
|
dma_params->pdc_xfer_size = 4;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
bits = 32;
|
|
dma_params->pdc_xfer_size = 4;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Compute SSC register settings.
|
|
*/
|
|
switch (ssc_p->daifmt
|
|
& (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
|
|
|
|
case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
|
|
/*
|
|
* I2S format, SSC provides BCLK and LRC clocks.
|
|
*
|
|
* The SSC transmit and receive clocks are generated
|
|
* from the MCK divider, and the BCLK signal
|
|
* is output on the SSC TK line.
|
|
*/
|
|
|
|
if (bits > 16 && !ssc->pdata->has_fslen_ext) {
|
|
dev_err(dai->dev,
|
|
"sample size %d is too large for SSC device\n",
|
|
bits);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fslen_ext = (bits - 1) / 16;
|
|
fslen = (bits - 1) % 16;
|
|
|
|
rcmr = SSC_BF(RCMR_PERIOD, rcmr_period)
|
|
| SSC_BF(RCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
|
|
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
|
|
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
|
|
|
|
rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
|
|
| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
|
|
| SSC_BF(RFMR_FSLEN, fslen)
|
|
| SSC_BF(RFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(RFMR_MSBF)
|
|
| SSC_BF(RFMR_LOOP, 0)
|
|
| SSC_BF(RFMR_DATLEN, (bits - 1));
|
|
|
|
tcmr = SSC_BF(TCMR_PERIOD, tcmr_period)
|
|
| SSC_BF(TCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
|
|
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
|
|
| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
|
|
| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
|
|
|
|
tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
|
|
| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(TFMR_FSDEN, 0)
|
|
| SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
|
|
| SSC_BF(TFMR_FSLEN, fslen)
|
|
| SSC_BF(TFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(TFMR_MSBF)
|
|
| SSC_BF(TFMR_DATDEF, 0)
|
|
| SSC_BF(TFMR_DATLEN, (bits - 1));
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
|
|
/* I2S format, CODEC supplies BCLK and LRC clocks. */
|
|
rcmr = SSC_BF(RCMR_PERIOD, 0)
|
|
| SSC_BF(RCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
|
|
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
|
|
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
|
|
SSC_CKS_PIN : SSC_CKS_CLOCK);
|
|
|
|
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
|
|
| SSC_BF(RFMR_FSLEN, 0)
|
|
| SSC_BF(RFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(RFMR_MSBF)
|
|
| SSC_BF(RFMR_LOOP, 0)
|
|
| SSC_BF(RFMR_DATLEN, (bits - 1));
|
|
|
|
tcmr = SSC_BF(TCMR_PERIOD, 0)
|
|
| SSC_BF(TCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
|
|
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
|
|
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
|
|
SSC_CKS_CLOCK : SSC_CKS_PIN);
|
|
|
|
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(TFMR_FSDEN, 0)
|
|
| SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
|
|
| SSC_BF(TFMR_FSLEN, 0)
|
|
| SSC_BF(TFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(TFMR_MSBF)
|
|
| SSC_BF(TFMR_DATDEF, 0)
|
|
| SSC_BF(TFMR_DATLEN, (bits - 1));
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFS:
|
|
/* I2S format, CODEC supplies BCLK, SSC supplies LRCLK. */
|
|
if (bits > 16 && !ssc->pdata->has_fslen_ext) {
|
|
dev_err(dai->dev,
|
|
"sample size %d is too large for SSC device\n",
|
|
bits);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fslen_ext = (bits - 1) / 16;
|
|
fslen = (bits - 1) % 16;
|
|
|
|
rcmr = SSC_BF(RCMR_PERIOD, rcmr_period)
|
|
| SSC_BF(RCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
|
|
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
|
|
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
|
|
SSC_CKS_PIN : SSC_CKS_CLOCK);
|
|
|
|
rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
|
|
| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
|
|
| SSC_BF(RFMR_FSLEN, fslen)
|
|
| SSC_BF(RFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(RFMR_MSBF)
|
|
| SSC_BF(RFMR_LOOP, 0)
|
|
| SSC_BF(RFMR_DATLEN, (bits - 1));
|
|
|
|
tcmr = SSC_BF(TCMR_PERIOD, tcmr_period)
|
|
| SSC_BF(TCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
|
|
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
|
|
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
|
|
SSC_CKS_CLOCK : SSC_CKS_PIN);
|
|
|
|
tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
|
|
| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_NEGATIVE)
|
|
| SSC_BF(TFMR_FSDEN, 0)
|
|
| SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
|
|
| SSC_BF(TFMR_FSLEN, fslen)
|
|
| SSC_BF(TFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(TFMR_MSBF)
|
|
| SSC_BF(TFMR_DATDEF, 0)
|
|
| SSC_BF(TFMR_DATLEN, (bits - 1));
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
|
|
/*
|
|
* DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
|
|
*
|
|
* The SSC transmit and receive clocks are generated from the
|
|
* MCK divider, and the BCLK signal is output
|
|
* on the SSC TK line.
|
|
*/
|
|
rcmr = SSC_BF(RCMR_PERIOD, rcmr_period)
|
|
| SSC_BF(RCMR_STTDLY, 1)
|
|
| SSC_BF(RCMR_START, SSC_START_RISING_RF)
|
|
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
|
|
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
|
|
|
|
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
|
|
| SSC_BF(RFMR_FSLEN, 0)
|
|
| SSC_BF(RFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(RFMR_MSBF)
|
|
| SSC_BF(RFMR_LOOP, 0)
|
|
| SSC_BF(RFMR_DATLEN, (bits - 1));
|
|
|
|
tcmr = SSC_BF(TCMR_PERIOD, tcmr_period)
|
|
| SSC_BF(TCMR_STTDLY, 1)
|
|
| SSC_BF(TCMR_START, SSC_START_RISING_RF)
|
|
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
|
|
| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
|
|
| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
|
|
|
|
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(TFMR_FSDEN, 0)
|
|
| SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
|
|
| SSC_BF(TFMR_FSLEN, 0)
|
|
| SSC_BF(TFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(TFMR_MSBF)
|
|
| SSC_BF(TFMR_DATDEF, 0)
|
|
| SSC_BF(TFMR_DATLEN, (bits - 1));
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
|
|
/*
|
|
* DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks.
|
|
*
|
|
* Data is transferred on first BCLK after LRC pulse rising
|
|
* edge.If stereo, the right channel data is contiguous with
|
|
* the left channel data.
|
|
*/
|
|
rcmr = SSC_BF(RCMR_PERIOD, 0)
|
|
| SSC_BF(RCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(RCMR_START, SSC_START_RISING_RF)
|
|
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
|
|
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
|
|
SSC_CKS_PIN : SSC_CKS_CLOCK);
|
|
|
|
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
|
|
| SSC_BF(RFMR_FSLEN, 0)
|
|
| SSC_BF(RFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(RFMR_MSBF)
|
|
| SSC_BF(RFMR_LOOP, 0)
|
|
| SSC_BF(RFMR_DATLEN, (bits - 1));
|
|
|
|
tcmr = SSC_BF(TCMR_PERIOD, 0)
|
|
| SSC_BF(TCMR_STTDLY, START_DELAY)
|
|
| SSC_BF(TCMR_START, SSC_START_RISING_RF)
|
|
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
|
|
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
|
|
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
|
|
SSC_CKS_CLOCK : SSC_CKS_PIN);
|
|
|
|
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
|
|
| SSC_BF(TFMR_FSDEN, 0)
|
|
| SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
|
|
| SSC_BF(TFMR_FSLEN, 0)
|
|
| SSC_BF(TFMR_DATNB, (channels - 1))
|
|
| SSC_BIT(TFMR_MSBF)
|
|
| SSC_BF(TFMR_DATDEF, 0)
|
|
| SSC_BF(TFMR_DATLEN, (bits - 1));
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
|
|
ssc_p->daifmt);
|
|
return -EINVAL;
|
|
}
|
|
pr_debug("atmel_ssc_hw_params: "
|
|
"RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
|
|
rcmr, rfmr, tcmr, tfmr);
|
|
|
|
if (!ssc_p->initialized) {
|
|
if (!ssc_p->ssc->pdata->use_dma) {
|
|
ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
|
|
ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
|
|
ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
|
|
ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
|
|
|
|
ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
|
|
ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
|
|
ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
|
|
ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
|
|
}
|
|
|
|
ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
|
|
ssc_p->name, ssc_p);
|
|
if (ret < 0) {
|
|
printk(KERN_WARNING
|
|
"atmel_ssc_dai: request_irq failure\n");
|
|
pr_debug("Atmel_ssc_dai: Stoping clock\n");
|
|
clk_disable(ssc_p->ssc->clk);
|
|
return ret;
|
|
}
|
|
|
|
ssc_p->initialized = 1;
|
|
}
|
|
|
|
/* set SSC clock mode register */
|
|
ssc_writel(ssc_p->ssc->regs, CMR, cmr_div);
|
|
|
|
/* set receive clock mode and format */
|
|
ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
|
|
ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
|
|
|
|
/* set transmit clock mode and format */
|
|
ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
|
|
ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
|
|
|
|
pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dai->dev);
|
|
struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
|
|
struct atmel_pcm_dma_params *dma_params;
|
|
int dir;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
dir = 0;
|
|
else
|
|
dir = 1;
|
|
|
|
dma_params = ssc_p->dma_params[dir];
|
|
|
|
ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
|
|
ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
|
|
|
|
pr_debug("%s enabled SSC_SR=0x%08x\n",
|
|
dir ? "receive" : "transmit",
|
|
ssc_readl(ssc_p->ssc->regs, SR));
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_ssc_trigger(struct snd_pcm_substream *substream,
|
|
int cmd, struct snd_soc_dai *dai)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dai->dev);
|
|
struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
|
|
struct atmel_pcm_dma_params *dma_params;
|
|
int dir;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
dir = 0;
|
|
else
|
|
dir = 1;
|
|
|
|
dma_params = ssc_p->dma_params[dir];
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
|
|
break;
|
|
default:
|
|
ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct atmel_ssc_info *ssc_p;
|
|
struct platform_device *pdev = to_platform_device(cpu_dai->dev);
|
|
|
|
if (!cpu_dai->active)
|
|
return 0;
|
|
|
|
ssc_p = &ssc_info[pdev->id];
|
|
|
|
/* Save the status register before disabling transmit and receive */
|
|
ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
|
|
ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
|
|
|
|
/* Save the current interrupt mask, then disable unmasked interrupts */
|
|
ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
|
|
ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
|
|
|
|
ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
|
|
ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
|
|
ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
|
|
ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
|
|
ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct atmel_ssc_info *ssc_p;
|
|
struct platform_device *pdev = to_platform_device(cpu_dai->dev);
|
|
u32 cr;
|
|
|
|
if (!cpu_dai->active)
|
|
return 0;
|
|
|
|
ssc_p = &ssc_info[pdev->id];
|
|
|
|
/* restore SSC register settings */
|
|
ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
|
|
ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
|
|
ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
|
|
ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
|
|
ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
|
|
|
|
/* re-enable interrupts */
|
|
ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
|
|
|
|
/* Re-enable receive and transmit as appropriate */
|
|
cr = 0;
|
|
cr |=
|
|
(ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
|
|
cr |=
|
|
(ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
|
|
ssc_writel(ssc_p->ssc->regs, CR, cr);
|
|
|
|
return 0;
|
|
}
|
|
#else /* CONFIG_PM */
|
|
# define atmel_ssc_suspend NULL
|
|
# define atmel_ssc_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops atmel_ssc_dai_ops = {
|
|
.startup = atmel_ssc_startup,
|
|
.shutdown = atmel_ssc_shutdown,
|
|
.prepare = atmel_ssc_prepare,
|
|
.trigger = atmel_ssc_trigger,
|
|
.hw_params = atmel_ssc_hw_params,
|
|
.set_fmt = atmel_ssc_set_dai_fmt,
|
|
.set_clkdiv = atmel_ssc_set_dai_clkdiv,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver atmel_ssc_dai = {
|
|
.suspend = atmel_ssc_suspend,
|
|
.resume = atmel_ssc_resume,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.rate_min = 8000,
|
|
.rate_max = 384000,
|
|
.formats = ATMEL_SSC_FORMATS,},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.rate_min = 8000,
|
|
.rate_max = 384000,
|
|
.formats = ATMEL_SSC_FORMATS,},
|
|
.ops = &atmel_ssc_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver atmel_ssc_component = {
|
|
.name = "atmel-ssc",
|
|
};
|
|
|
|
static int asoc_ssc_init(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct ssc_device *ssc = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = snd_soc_register_component(dev, &atmel_ssc_component,
|
|
&atmel_ssc_dai, 1);
|
|
if (ret) {
|
|
dev_err(dev, "Could not register DAI: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
if (ssc->pdata->use_dma)
|
|
ret = atmel_pcm_dma_platform_register(dev);
|
|
else
|
|
ret = atmel_pcm_pdc_platform_register(dev);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "Could not register PCM: %d\n", ret);
|
|
goto err_unregister_dai;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister_dai:
|
|
snd_soc_unregister_component(dev);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void asoc_ssc_exit(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct ssc_device *ssc = platform_get_drvdata(pdev);
|
|
|
|
if (ssc->pdata->use_dma)
|
|
atmel_pcm_dma_platform_unregister(dev);
|
|
else
|
|
atmel_pcm_pdc_platform_unregister(dev);
|
|
|
|
snd_soc_unregister_component(dev);
|
|
}
|
|
|
|
/**
|
|
* atmel_ssc_set_audio - Allocate the specified SSC for audio use.
|
|
*/
|
|
int atmel_ssc_set_audio(int ssc_id)
|
|
{
|
|
struct ssc_device *ssc;
|
|
int ret;
|
|
|
|
/* If we can grab the SSC briefly to parent the DAI device off it */
|
|
ssc = ssc_request(ssc_id);
|
|
if (IS_ERR(ssc)) {
|
|
pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",
|
|
PTR_ERR(ssc));
|
|
return PTR_ERR(ssc);
|
|
} else {
|
|
ssc_info[ssc_id].ssc = ssc;
|
|
}
|
|
|
|
ret = asoc_ssc_init(&ssc->pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(atmel_ssc_set_audio);
|
|
|
|
void atmel_ssc_put_audio(int ssc_id)
|
|
{
|
|
struct ssc_device *ssc = ssc_info[ssc_id].ssc;
|
|
|
|
asoc_ssc_exit(&ssc->pdev->dev);
|
|
ssc_free(ssc);
|
|
}
|
|
EXPORT_SYMBOL_GPL(atmel_ssc_put_audio);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
|
|
MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
|
|
MODULE_LICENSE("GPL");
|