forked from Minki/linux
53ad9e8d37
This patch 1. Add support for device-tree binding for EHRWPM driver. 2. Set size of pwm-cells set to 3 to support PWM channel number, PWM period & polarity configuration from device tree. 3. Add enable/disable clock gating in PWM subsystem common config space. 4. When here set .owner member in platform_driver structure to THIS_MODULE. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
24 lines
809 B
Plaintext
24 lines
809 B
Plaintext
TI SOC EHRPWM based PWM controller
|
|
|
|
Required properties:
|
|
- compatible : Must be "ti,am33xx-ehrpwm"
|
|
- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
|
|
First cell specifies the per-chip index of the PWM to use, the second
|
|
cell is the period in nanoseconds and bit 0 in the third cell is used to
|
|
encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
|
|
to 1 for inverse polarity & set to 0 for normal polarity.
|
|
- reg: physical base address and size of the registers map.
|
|
|
|
Optional properties:
|
|
- ti,hwmods: Name of the hwmod associated to the EHRPWM:
|
|
"ehrpwm<x>", <x> being the 0-based instance number from the HW spec
|
|
|
|
Example:
|
|
|
|
ehrpwm0: ehrpwm@0 {
|
|
compatible = "ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x48300200 0x100>;
|
|
ti,hwmods = "ehrpwm0";
|
|
};
|