mainlining shenanigans
522a6efef2
4.14, please pull the following: - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance problem and would have required either duplication or cross merges - Stefan changes how the pinmuxing is defined and pushes it at the board level to support Raspberry Pi Zero Wireless. He then adds supports for the actual Raspberry Pi Zero Wireless board along with binding documentation. Stefan also defines a proper SMP enable-method property and binding for BCM2836 (Raspbery Pi 2) - Rafal describes the BCM5301X USB ports correctly in Device Tree such that it becomes possible to assign them to specific LED triggers (e.g: USB activity). He does the same thing for BCM53573 and defines default LED triggers for USB. - Jon provides a fix for Northstar Plus which consists in correctly defining the "dma-coherent" property for peripherals which are DMA coherent. He also does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY and host controller support for NorthStar Plus - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is based on BCM47182/53573 and which supports external MoCA (BCM6802) - Ray fixes the wrong UART2 base address for Cygnus - Scott moves the v3d node in the proper unit address order and defines the correct UART alias for the BCM91130_entphn reference board to be UART3 - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: SDHCI, Keypad, SPI, DMA and pinmux configurations - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZldUgAAoJEIfQlpxEBwcEUIgQAIdyDJn+q+mxVhtY8m5xd7ru +pnSvzJoL0nNUALPez4SGRBSBsv8oH3zO77aLQcPEcy1W+FCvjGI3eh22bm5PkOO UASbrw5c5RfwYI/fVVkTqoZT3d4Xo4ZXTe+ML0wVS7x9Hw8ozQPBCc5hRJ7PQYaO U1Ttvpud354xgCFXnvtadDwwTa2W9MdPtsTkrk42Q+p06KZTlONUslAL+DI1RlUw Zf81r/93YzmEbsPpnG4nlW1dJTTILPE7AFQfJQ47Fg+aJ/suhYMlEH2EvxqgXhh0 FzAWd0Zo1p83chArSQdKGEkS+RvSGuSX1D1n1ZVMO2NJZd3RSqLVy6zUB38f+5Eu 0nOxwxWaG/isyGJ9DtMSyM7ZdgZhYSEI847DC3zOah3/kNquF/NmFFUOPzW79D53 WJ/qvjxYZ9fcy3p2W3Vk8LSNiBeiQGQ+zodpRjTrHIBocqQUf2yxSeepGV9zeHk8 ZwwUmtSE/qZd+MAqiki1DdUIWqHvkvOx0BbYZHLqA3ND2Vz6n6hVvMMMDo2+TyN7 WNhOdrM7Gwt+LNYyW6Gjrvxe5wIYn6Gw3+wPbxTSZH7lBbBC/c56cR0V3nJkpuiS C5OwCx1Miocz61GPjKtkaYat3cnRum96X5hsadTLJ/cNscNKdIXqUkPtZ6jLs7VI SbSQS4Im7fdGaGeRRsj1 =WUr3 -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs Device Tree changes for 4.14, please pull the following: - Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance problem and would have required either duplication or cross merges - Stefan changes how the pinmuxing is defined and pushes it at the board level to support Raspberry Pi Zero Wireless. He then adds supports for the actual Raspberry Pi Zero Wireless board along with binding documentation. Stefan also defines a proper SMP enable-method property and binding for BCM2836 (Raspbery Pi 2) - Rafal describes the BCM5301X USB ports correctly in Device Tree such that it becomes possible to assign them to specific LED triggers (e.g: USB activity). He does the same thing for BCM53573 and defines default LED triggers for USB. - Jon provides a fix for Northstar Plus which consists in correctly defining the "dma-coherent" property for peripherals which are DMA coherent. He also does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY and host controller support for NorthStar Plus - Florian adds support for Broadcom's BCM947189ACDBMR reference board which is based on BCM47182/53573 and which supports external MoCA (BCM6802) - Ray fixes the wrong UART2 base address for Cygnus - Scott moves the v3d node in the proper unit address order and defines the correct UART alias for the BCM91130_entphn reference board to be UART3 - Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit - Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file: SDHCI, Keypad, SPI, DMA and pinmux configurations - Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes * tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux: ARM: BCM53573: Specify ports for USB LED for Tenda AC9 ARM: dts: cygnus: Add generic-ehci/ohci nodes ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn ARM: dts: cygnus: Add additional peripherals to dtsi ARM: dts: cygnus: Enable Performance Monitoring Unit ARM: dts: cygnus: place v3d in proper address ordered location ARM: dts: cygnus: Fix incorrect UART2 register base ARM: dts: bcm283x: Add 32-bit enable method for SMP dt-bindings: arm: add SMP enable-method for BCM2836 ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices ARM: dts: NSP: Add USB3 and USB3 PHY to NSP ARM: dts: NSP: Rearrage USB entries ARM: dts: NSP: Add dma-coherent to relevant DT entries ARM: dts: bcm2835: Add Raspberry Pi Zero W dt-bindings: bcm: Add Raspberry Pi Zero W ARM: bcm283x: Define UART pinmuxing on board level ARM: dts: BCM5301X: Specify USB ports for each controller ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm. |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel ============ This file was moved to Documentation/admin-guide/README.rst Please notice that there are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. In order to build the documentation, use ``make htmldocs`` or ``make pdfdocs``. There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.