linux/include/scsi/libfcoe.h
Vasu Dev 519e5135e2 [SCSI] fcoe: adds src and dest mac address checking for fcoe frames
This is  per FC-BB-5 Annex-D recommendation and per that
if address checking fails then drop the frame.

FIP code paths are already doing this so only needed for fcoe
frames.

The src address checking is limited to only fip mode since
this might break non-fip mode used in p2p due to used OUI
based addressing in some p2p code paths, going forward FIP
will be the only mode, therefore limited this to only FIP
mode so that it won't break non-fip p2p mode for now.

-v2
Removes FCOE packet type checking since fcoe_rcv is
registered to receive only FCoE type packets from netdev
and it is already checked by netdev.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:47 -05:00

184 lines
6.1 KiB
C

/*
* Copyright (c) 2008-2009 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2007-2008 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Maintained at www.Open-FCoE.org
*/
#ifndef _LIBFCOE_H
#define _LIBFCOE_H
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <scsi/fc/fc_fcoe.h>
#include <scsi/libfc.h>
#define FCOE_MAX_CMD_LEN 16 /* Supported CDB length */
/*
* FIP tunable parameters.
*/
#define FCOE_CTLR_START_DELAY 2000 /* mS after first adv. to choose FCF */
#define FCOE_CTRL_SOL_TOV 2000 /* min. solicitation interval (mS) */
#define FCOE_CTLR_FCF_LIMIT 20 /* max. number of FCF entries */
/**
* enum fip_state - internal state of FCoE controller.
* @FIP_ST_DISABLED: controller has been disabled or not yet enabled.
* @FIP_ST_LINK_WAIT: the physical link is down or unusable.
* @FIP_ST_AUTO: determining whether to use FIP or non-FIP mode.
* @FIP_ST_NON_FIP: non-FIP mode selected.
* @FIP_ST_ENABLED: FIP mode selected.
*/
enum fip_state {
FIP_ST_DISABLED,
FIP_ST_LINK_WAIT,
FIP_ST_AUTO,
FIP_ST_NON_FIP,
FIP_ST_ENABLED,
};
/**
* struct fcoe_ctlr - FCoE Controller and FIP state
* @state: internal FIP state for network link and FIP or non-FIP mode.
* @mode: LLD-selected mode.
* @lp: &fc_lport: libfc local port.
* @sel_fcf: currently selected FCF, or NULL.
* @fcfs: list of discovered FCFs.
* @fcf_count: number of discovered FCF entries.
* @sol_time: time when a multicast solicitation was last sent.
* @sel_time: time after which to select an FCF.
* @port_ka_time: time of next port keep-alive.
* @ctlr_ka_time: time of next controller keep-alive.
* @timer: timer struct used for all delayed events.
* @timer_work: &work_struct for doing keep-alives and resets.
* @recv_work: &work_struct for receiving FIP frames.
* @fip_recv_list: list of received FIP frames.
* @user_mfs: configured maximum FC frame size, including FC header.
* @flogi_oxid: exchange ID of most recent fabric login.
* @flogi_count: number of FLOGI attempts in AUTO mode.
* @map_dest: use the FC_MAP mode for destination MAC addresses.
* @spma: supports SPMA server-provided MACs mode
* @send_ctlr_ka: need to send controller keep alive
* @send_port_ka: need to send port keep alives
* @dest_addr: MAC address of the selected FC forwarder.
* @ctl_src_addr: the native MAC address of our local port.
* @send: LLD-supplied function to handle sending FIP Ethernet frames
* @update_mac: LLD-supplied function to handle changes to MAC addresses.
* @get_src_addr: LLD-supplied function to supply a source MAC address.
* @lock: lock protecting this structure.
*
* This structure is used by all FCoE drivers. It contains information
* needed by all FCoE low-level drivers (LLDs) as well as internal state
* for FIP, and fields shared with the LLDS.
*/
struct fcoe_ctlr {
enum fip_state state;
enum fip_state mode;
struct fc_lport *lp;
struct fcoe_fcf *sel_fcf;
struct list_head fcfs;
u16 fcf_count;
unsigned long sol_time;
unsigned long sel_time;
unsigned long port_ka_time;
unsigned long ctlr_ka_time;
struct timer_list timer;
struct work_struct timer_work;
struct work_struct recv_work;
struct sk_buff_head fip_recv_list;
u16 user_mfs;
u16 flogi_oxid;
u8 flogi_count;
u8 reset_req;
u8 map_dest;
u8 spma;
u8 send_ctlr_ka;
u8 send_port_ka;
u8 dest_addr[ETH_ALEN];
u8 ctl_src_addr[ETH_ALEN];
void (*send)(struct fcoe_ctlr *, struct sk_buff *);
void (*update_mac)(struct fc_lport *, u8 *addr);
u8 * (*get_src_addr)(struct fc_lport *);
spinlock_t lock;
};
/**
* struct fcoe_fcf - Fibre-Channel Forwarder
* @list: list linkage
* @time: system time (jiffies) when an advertisement was last received
* @switch_name: WWN of switch from advertisement
* @fabric_name: WWN of fabric from advertisement
* @fc_map: FC_MAP value from advertisement
* @fcf_mac: Ethernet address of the FCF
* @vfid: virtual fabric ID
* @pri: selection priority, smaller values are better
* @flags: flags received from advertisement
* @fka_period: keep-alive period, in jiffies
*
* A Fibre-Channel Forwarder (FCF) is the entity on the Ethernet that
* passes FCoE frames on to an FC fabric. This structure represents
* one FCF from which advertisements have been received.
*
* When looking up an FCF, @switch_name, @fabric_name, @fc_map, @vfid, and
* @fcf_mac together form the lookup key.
*/
struct fcoe_fcf {
struct list_head list;
unsigned long time;
u64 switch_name;
u64 fabric_name;
u32 fc_map;
u16 vfid;
u8 fcf_mac[ETH_ALEN];
u8 pri;
u16 flags;
u32 fka_period;
u8 fd_flags:1;
};
/* FIP API functions */
void fcoe_ctlr_init(struct fcoe_ctlr *);
void fcoe_ctlr_destroy(struct fcoe_ctlr *);
void fcoe_ctlr_link_up(struct fcoe_ctlr *);
int fcoe_ctlr_link_down(struct fcoe_ctlr *);
int fcoe_ctlr_els_send(struct fcoe_ctlr *, struct fc_lport *, struct sk_buff *);
void fcoe_ctlr_recv(struct fcoe_ctlr *, struct sk_buff *);
int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *,
struct fc_frame *);
/* libfcoe funcs */
u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
int fcoe_libfc_config(struct fc_lport *, struct libfc_function_template *);
/**
* is_fip_mode() - returns true if FIP mode selected.
* @fip: FCoE controller.
*/
static inline bool is_fip_mode(struct fcoe_ctlr *fip)
{
return fip->state == FIP_ST_ENABLED;
}
#endif /* _LIBFCOE_H */