forked from Minki/linux
17e6b00ac4
Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
895 lines
22 KiB
C
895 lines
22 KiB
C
/*
|
|
* PCIe host controller driver for Xilinx AXI PCIe Bridge
|
|
*
|
|
* Copyright (c) 2012 - 2014 Xilinx, Inc.
|
|
*
|
|
* Based on the Tegra PCIe driver
|
|
*
|
|
* Bits taken from Synopsys Designware Host controller driver and
|
|
* ARM PCI Host generic driver.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* Register definitions */
|
|
#define XILINX_PCIE_REG_BIR 0x00000130
|
|
#define XILINX_PCIE_REG_IDR 0x00000138
|
|
#define XILINX_PCIE_REG_IMR 0x0000013c
|
|
#define XILINX_PCIE_REG_PSCR 0x00000144
|
|
#define XILINX_PCIE_REG_RPSC 0x00000148
|
|
#define XILINX_PCIE_REG_MSIBASE1 0x0000014c
|
|
#define XILINX_PCIE_REG_MSIBASE2 0x00000150
|
|
#define XILINX_PCIE_REG_RPEFR 0x00000154
|
|
#define XILINX_PCIE_REG_RPIFR1 0x00000158
|
|
#define XILINX_PCIE_REG_RPIFR2 0x0000015c
|
|
|
|
/* Interrupt registers definitions */
|
|
#define XILINX_PCIE_INTR_LINK_DOWN BIT(0)
|
|
#define XILINX_PCIE_INTR_ECRC_ERR BIT(1)
|
|
#define XILINX_PCIE_INTR_STR_ERR BIT(2)
|
|
#define XILINX_PCIE_INTR_HOT_RESET BIT(3)
|
|
#define XILINX_PCIE_INTR_CFG_TIMEOUT BIT(8)
|
|
#define XILINX_PCIE_INTR_CORRECTABLE BIT(9)
|
|
#define XILINX_PCIE_INTR_NONFATAL BIT(10)
|
|
#define XILINX_PCIE_INTR_FATAL BIT(11)
|
|
#define XILINX_PCIE_INTR_INTX BIT(16)
|
|
#define XILINX_PCIE_INTR_MSI BIT(17)
|
|
#define XILINX_PCIE_INTR_SLV_UNSUPP BIT(20)
|
|
#define XILINX_PCIE_INTR_SLV_UNEXP BIT(21)
|
|
#define XILINX_PCIE_INTR_SLV_COMPL BIT(22)
|
|
#define XILINX_PCIE_INTR_SLV_ERRP BIT(23)
|
|
#define XILINX_PCIE_INTR_SLV_CMPABT BIT(24)
|
|
#define XILINX_PCIE_INTR_SLV_ILLBUR BIT(25)
|
|
#define XILINX_PCIE_INTR_MST_DECERR BIT(26)
|
|
#define XILINX_PCIE_INTR_MST_SLVERR BIT(27)
|
|
#define XILINX_PCIE_INTR_MST_ERRP BIT(28)
|
|
#define XILINX_PCIE_IMR_ALL_MASK 0x1FF30FED
|
|
#define XILINX_PCIE_IDR_ALL_MASK 0xFFFFFFFF
|
|
|
|
/* Root Port Error FIFO Read Register definitions */
|
|
#define XILINX_PCIE_RPEFR_ERR_VALID BIT(18)
|
|
#define XILINX_PCIE_RPEFR_REQ_ID GENMASK(15, 0)
|
|
#define XILINX_PCIE_RPEFR_ALL_MASK 0xFFFFFFFF
|
|
|
|
/* Root Port Interrupt FIFO Read Register 1 definitions */
|
|
#define XILINX_PCIE_RPIFR1_INTR_VALID BIT(31)
|
|
#define XILINX_PCIE_RPIFR1_MSI_INTR BIT(30)
|
|
#define XILINX_PCIE_RPIFR1_INTR_MASK GENMASK(28, 27)
|
|
#define XILINX_PCIE_RPIFR1_ALL_MASK 0xFFFFFFFF
|
|
#define XILINX_PCIE_RPIFR1_INTR_SHIFT 27
|
|
|
|
/* Bridge Info Register definitions */
|
|
#define XILINX_PCIE_BIR_ECAM_SZ_MASK GENMASK(18, 16)
|
|
#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT 16
|
|
|
|
/* Root Port Interrupt FIFO Read Register 2 definitions */
|
|
#define XILINX_PCIE_RPIFR2_MSG_DATA GENMASK(15, 0)
|
|
|
|
/* Root Port Status/control Register definitions */
|
|
#define XILINX_PCIE_REG_RPSC_BEN BIT(0)
|
|
|
|
/* Phy Status/Control Register definitions */
|
|
#define XILINX_PCIE_REG_PSCR_LNKUP BIT(11)
|
|
|
|
/* ECAM definitions */
|
|
#define ECAM_BUS_NUM_SHIFT 20
|
|
#define ECAM_DEV_NUM_SHIFT 12
|
|
|
|
/* Number of MSI IRQs */
|
|
#define XILINX_NUM_MSI_IRQS 128
|
|
|
|
/* Number of Memory Resources */
|
|
#define XILINX_MAX_NUM_RESOURCES 3
|
|
|
|
/**
|
|
* struct xilinx_pcie_port - PCIe port information
|
|
* @reg_base: IO Mapped Register Base
|
|
* @irq: Interrupt number
|
|
* @msi_pages: MSI pages
|
|
* @root_busno: Root Bus number
|
|
* @dev: Device pointer
|
|
* @irq_domain: IRQ domain pointer
|
|
* @bus_range: Bus range
|
|
* @resources: Bus Resources
|
|
*/
|
|
struct xilinx_pcie_port {
|
|
void __iomem *reg_base;
|
|
u32 irq;
|
|
unsigned long msi_pages;
|
|
u8 root_busno;
|
|
struct device *dev;
|
|
struct irq_domain *irq_domain;
|
|
struct resource bus_range;
|
|
struct list_head resources;
|
|
};
|
|
|
|
static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
|
|
|
|
static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
|
|
{
|
|
return sys->private_data;
|
|
}
|
|
|
|
static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
|
|
{
|
|
return readl(port->reg_base + reg);
|
|
}
|
|
|
|
static inline void pcie_write(struct xilinx_pcie_port *port, u32 val, u32 reg)
|
|
{
|
|
writel(val, port->reg_base + reg);
|
|
}
|
|
|
|
static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port)
|
|
{
|
|
return (pcie_read(port, XILINX_PCIE_REG_PSCR) &
|
|
XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_clear_err_interrupts - Clear Error Interrupts
|
|
* @port: PCIe port information
|
|
*/
|
|
static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
|
|
{
|
|
unsigned long val = pcie_read(port, XILINX_PCIE_REG_RPEFR);
|
|
|
|
if (val & XILINX_PCIE_RPEFR_ERR_VALID) {
|
|
dev_dbg(port->dev, "Requester ID %lu\n",
|
|
val & XILINX_PCIE_RPEFR_REQ_ID);
|
|
pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK,
|
|
XILINX_PCIE_REG_RPEFR);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_valid_device - Check if a valid device is present on bus
|
|
* @bus: PCI Bus structure
|
|
* @devfn: device/function
|
|
*
|
|
* Return: 'true' on success and 'false' if invalid device is found
|
|
*/
|
|
static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
|
|
{
|
|
struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
|
|
|
|
/* Check if link is up when trying to access downstream ports */
|
|
if (bus->number != port->root_busno)
|
|
if (!xilinx_pcie_link_is_up(port))
|
|
return false;
|
|
|
|
/* Only one device down on each root port */
|
|
if (bus->number == port->root_busno && devfn > 0)
|
|
return false;
|
|
|
|
/*
|
|
* Do not read more than one device on the bus directly attached
|
|
* to RC.
|
|
*/
|
|
if (bus->primary == port->root_busno && devfn > 0)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_map_bus - Get configuration base
|
|
* @bus: PCI Bus structure
|
|
* @devfn: Device/function
|
|
* @where: Offset from base
|
|
*
|
|
* Return: Base address of the configuration space needed to be
|
|
* accessed.
|
|
*/
|
|
static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
|
|
unsigned int devfn, int where)
|
|
{
|
|
struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
|
|
int relbus;
|
|
|
|
if (!xilinx_pcie_valid_device(bus, devfn))
|
|
return NULL;
|
|
|
|
relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
|
|
(devfn << ECAM_DEV_NUM_SHIFT);
|
|
|
|
return port->reg_base + relbus + where;
|
|
}
|
|
|
|
/* PCIe operations */
|
|
static struct pci_ops xilinx_pcie_ops = {
|
|
.map_bus = xilinx_pcie_map_bus,
|
|
.read = pci_generic_config_read,
|
|
.write = pci_generic_config_write,
|
|
};
|
|
|
|
/* MSI functions */
|
|
|
|
/**
|
|
* xilinx_pcie_destroy_msi - Free MSI number
|
|
* @irq: IRQ to be freed
|
|
*/
|
|
static void xilinx_pcie_destroy_msi(unsigned int irq)
|
|
{
|
|
struct msi_desc *msi;
|
|
struct xilinx_pcie_port *port;
|
|
|
|
if (!test_bit(irq, msi_irq_in_use)) {
|
|
msi = irq_get_msi_desc(irq);
|
|
port = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
|
|
dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
|
|
} else {
|
|
clear_bit(irq, msi_irq_in_use);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_assign_msi - Allocate MSI number
|
|
* @port: PCIe port structure
|
|
*
|
|
* Return: A valid IRQ on success and error value on failure.
|
|
*/
|
|
static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port)
|
|
{
|
|
int pos;
|
|
|
|
pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
|
|
if (pos < XILINX_NUM_MSI_IRQS)
|
|
set_bit(pos, msi_irq_in_use);
|
|
else
|
|
return -ENOSPC;
|
|
|
|
return pos;
|
|
}
|
|
|
|
/**
|
|
* xilinx_msi_teardown_irq - Destroy the MSI
|
|
* @chip: MSI Chip descriptor
|
|
* @irq: MSI IRQ to destroy
|
|
*/
|
|
static void xilinx_msi_teardown_irq(struct msi_controller *chip,
|
|
unsigned int irq)
|
|
{
|
|
xilinx_pcie_destroy_msi(irq);
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_msi_setup_irq - Setup MSI request
|
|
* @chip: MSI chip pointer
|
|
* @pdev: PCIe device pointer
|
|
* @desc: MSI descriptor pointer
|
|
*
|
|
* Return: '0' on success and error value on failure
|
|
*/
|
|
static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
|
|
struct pci_dev *pdev,
|
|
struct msi_desc *desc)
|
|
{
|
|
struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
|
|
unsigned int irq;
|
|
int hwirq;
|
|
struct msi_msg msg;
|
|
phys_addr_t msg_addr;
|
|
|
|
hwirq = xilinx_pcie_assign_msi(port);
|
|
if (hwirq < 0)
|
|
return hwirq;
|
|
|
|
irq = irq_create_mapping(port->irq_domain, hwirq);
|
|
if (!irq)
|
|
return -EINVAL;
|
|
|
|
irq_set_msi_desc(irq, desc);
|
|
|
|
msg_addr = virt_to_phys((void *)port->msi_pages);
|
|
|
|
msg.address_hi = 0;
|
|
msg.address_lo = msg_addr;
|
|
msg.data = irq;
|
|
|
|
pci_write_msi_msg(irq, &msg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* MSI Chip Descriptor */
|
|
static struct msi_controller xilinx_pcie_msi_chip = {
|
|
.setup_irq = xilinx_pcie_msi_setup_irq,
|
|
.teardown_irq = xilinx_msi_teardown_irq,
|
|
};
|
|
|
|
/* HW Interrupt Chip Descriptor */
|
|
static struct irq_chip xilinx_msi_irq_chip = {
|
|
.name = "Xilinx PCIe MSI",
|
|
.irq_enable = pci_msi_unmask_irq,
|
|
.irq_disable = pci_msi_mask_irq,
|
|
.irq_mask = pci_msi_mask_irq,
|
|
.irq_unmask = pci_msi_unmask_irq,
|
|
};
|
|
|
|
/**
|
|
* xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
|
|
* @domain: IRQ domain
|
|
* @irq: Virtual IRQ number
|
|
* @hwirq: HW interrupt number
|
|
*
|
|
* Return: Always returns 0.
|
|
*/
|
|
static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq);
|
|
irq_set_chip_data(irq, domain->host_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* IRQ Domain operations */
|
|
static const struct irq_domain_ops msi_domain_ops = {
|
|
.map = xilinx_pcie_msi_map,
|
|
};
|
|
|
|
/**
|
|
* xilinx_pcie_enable_msi - Enable MSI support
|
|
* @port: PCIe port information
|
|
*/
|
|
static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
|
|
{
|
|
phys_addr_t msg_addr;
|
|
|
|
port->msi_pages = __get_free_pages(GFP_KERNEL, 0);
|
|
msg_addr = virt_to_phys((void *)port->msi_pages);
|
|
pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
|
|
pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2);
|
|
}
|
|
|
|
/* INTx Functions */
|
|
|
|
/**
|
|
* xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
|
|
* @domain: IRQ domain
|
|
* @irq: Virtual IRQ number
|
|
* @hwirq: HW interrupt number
|
|
*
|
|
* Return: Always returns 0.
|
|
*/
|
|
static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
|
|
irq_set_chip_data(irq, domain->host_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* INTx IRQ Domain operations */
|
|
static const struct irq_domain_ops intx_domain_ops = {
|
|
.map = xilinx_pcie_intx_map,
|
|
};
|
|
|
|
/* PCIe HW Functions */
|
|
|
|
/**
|
|
* xilinx_pcie_intr_handler - Interrupt Service Handler
|
|
* @irq: IRQ number
|
|
* @data: PCIe port information
|
|
*
|
|
* Return: IRQ_HANDLED on success and IRQ_NONE on failure
|
|
*/
|
|
static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
|
|
{
|
|
struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
|
|
u32 val, mask, status, msi_data;
|
|
|
|
/* Read interrupt decode and mask registers */
|
|
val = pcie_read(port, XILINX_PCIE_REG_IDR);
|
|
mask = pcie_read(port, XILINX_PCIE_REG_IMR);
|
|
|
|
status = val & mask;
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
if (status & XILINX_PCIE_INTR_LINK_DOWN)
|
|
dev_warn(port->dev, "Link Down\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_ECRC_ERR)
|
|
dev_warn(port->dev, "ECRC failed\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_STR_ERR)
|
|
dev_warn(port->dev, "Streaming error\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_HOT_RESET)
|
|
dev_info(port->dev, "Hot reset\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_CFG_TIMEOUT)
|
|
dev_warn(port->dev, "ECAM access timeout\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_CORRECTABLE) {
|
|
dev_warn(port->dev, "Correctable error message\n");
|
|
xilinx_pcie_clear_err_interrupts(port);
|
|
}
|
|
|
|
if (status & XILINX_PCIE_INTR_NONFATAL) {
|
|
dev_warn(port->dev, "Non fatal error message\n");
|
|
xilinx_pcie_clear_err_interrupts(port);
|
|
}
|
|
|
|
if (status & XILINX_PCIE_INTR_FATAL) {
|
|
dev_warn(port->dev, "Fatal error message\n");
|
|
xilinx_pcie_clear_err_interrupts(port);
|
|
}
|
|
|
|
if (status & XILINX_PCIE_INTR_INTX) {
|
|
/* INTx interrupt received */
|
|
val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
|
|
|
|
/* Check whether interrupt valid */
|
|
if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
|
|
dev_warn(port->dev, "RP Intr FIFO1 read error\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (!(val & XILINX_PCIE_RPIFR1_MSI_INTR)) {
|
|
/* Clear interrupt FIFO register 1 */
|
|
pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
|
|
XILINX_PCIE_REG_RPIFR1);
|
|
|
|
/* Handle INTx Interrupt */
|
|
val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
|
|
XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
|
|
generic_handle_irq(irq_find_mapping(port->irq_domain,
|
|
val));
|
|
}
|
|
}
|
|
|
|
if (status & XILINX_PCIE_INTR_MSI) {
|
|
/* MSI Interrupt */
|
|
val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
|
|
|
|
if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
|
|
dev_warn(port->dev, "RP Intr FIFO1 read error\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
|
|
msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
|
|
XILINX_PCIE_RPIFR2_MSG_DATA;
|
|
|
|
/* Clear interrupt FIFO register 1 */
|
|
pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
|
|
XILINX_PCIE_REG_RPIFR1);
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
/* Handle MSI Interrupt */
|
|
generic_handle_irq(msi_data);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
|
|
dev_warn(port->dev, "Slave unsupported request\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_SLV_UNEXP)
|
|
dev_warn(port->dev, "Slave unexpected completion\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_SLV_COMPL)
|
|
dev_warn(port->dev, "Slave completion timeout\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_SLV_ERRP)
|
|
dev_warn(port->dev, "Slave Error Poison\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_SLV_CMPABT)
|
|
dev_warn(port->dev, "Slave Completer Abort\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_SLV_ILLBUR)
|
|
dev_warn(port->dev, "Slave Illegal Burst\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_MST_DECERR)
|
|
dev_warn(port->dev, "Master decode error\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_MST_SLVERR)
|
|
dev_warn(port->dev, "Master slave error\n");
|
|
|
|
if (status & XILINX_PCIE_INTR_MST_ERRP)
|
|
dev_warn(port->dev, "Master error poison\n");
|
|
|
|
/* Clear the Interrupt Decode register */
|
|
pcie_write(port, status, XILINX_PCIE_REG_IDR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_free_irq_domain - Free IRQ domain
|
|
* @port: PCIe port information
|
|
*/
|
|
static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
|
|
{
|
|
int i;
|
|
u32 irq, num_irqs;
|
|
|
|
/* Free IRQ Domain */
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
|
|
free_pages(port->msi_pages, 0);
|
|
|
|
num_irqs = XILINX_NUM_MSI_IRQS;
|
|
} else {
|
|
/* INTx */
|
|
num_irqs = 4;
|
|
}
|
|
|
|
for (i = 0; i < num_irqs; i++) {
|
|
irq = irq_find_mapping(port->irq_domain, i);
|
|
if (irq > 0)
|
|
irq_dispose_mapping(irq);
|
|
}
|
|
|
|
irq_domain_remove(port->irq_domain);
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_init_irq_domain - Initialize IRQ domain
|
|
* @port: PCIe port information
|
|
*
|
|
* Return: '0' on success and error value on failure
|
|
*/
|
|
static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
|
|
{
|
|
struct device *dev = port->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct device_node *pcie_intc_node;
|
|
|
|
/* Setup INTx */
|
|
pcie_intc_node = of_get_next_child(node, NULL);
|
|
if (!pcie_intc_node) {
|
|
dev_err(dev, "No PCIe Intc node found\n");
|
|
return PTR_ERR(pcie_intc_node);
|
|
}
|
|
|
|
port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
|
|
&intx_domain_ops,
|
|
port);
|
|
if (!port->irq_domain) {
|
|
dev_err(dev, "Failed to get a INTx IRQ domain\n");
|
|
return PTR_ERR(port->irq_domain);
|
|
}
|
|
|
|
/* Setup MSI */
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
port->irq_domain = irq_domain_add_linear(node,
|
|
XILINX_NUM_MSI_IRQS,
|
|
&msi_domain_ops,
|
|
&xilinx_pcie_msi_chip);
|
|
if (!port->irq_domain) {
|
|
dev_err(dev, "Failed to get a MSI IRQ domain\n");
|
|
return PTR_ERR(port->irq_domain);
|
|
}
|
|
|
|
xilinx_pcie_enable_msi(port);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_init_port - Initialize hardware
|
|
* @port: PCIe port information
|
|
*/
|
|
static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
|
|
{
|
|
if (xilinx_pcie_link_is_up(port))
|
|
dev_info(port->dev, "PCIe Link is UP\n");
|
|
else
|
|
dev_info(port->dev, "PCIe Link is DOWN\n");
|
|
|
|
/* Disable all interrupts */
|
|
pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
|
|
XILINX_PCIE_REG_IMR);
|
|
|
|
/* Clear pending interrupts */
|
|
pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
|
|
XILINX_PCIE_IMR_ALL_MASK,
|
|
XILINX_PCIE_REG_IDR);
|
|
|
|
/* Enable all interrupts */
|
|
pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR);
|
|
|
|
/* Enable the Bridge enable bit */
|
|
pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) |
|
|
XILINX_PCIE_REG_RPSC_BEN,
|
|
XILINX_PCIE_REG_RPSC);
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_setup - Setup memory resources
|
|
* @nr: Bus number
|
|
* @sys: Per controller structure
|
|
*
|
|
* Return: '1' on success and error value on failure
|
|
*/
|
|
static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
|
|
{
|
|
struct xilinx_pcie_port *port = sys_to_pcie(sys);
|
|
|
|
list_splice_init(&port->resources, &sys->resources);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_scan_bus - Scan PCIe bus for devices
|
|
* @nr: Bus number
|
|
* @sys: Per controller structure
|
|
*
|
|
* Return: Valid Bus pointer on success and NULL on failure
|
|
*/
|
|
static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
|
|
{
|
|
struct xilinx_pcie_port *port = sys_to_pcie(sys);
|
|
struct pci_bus *bus;
|
|
|
|
port->root_busno = sys->busnr;
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI))
|
|
bus = pci_scan_root_bus_msi(port->dev, sys->busnr,
|
|
&xilinx_pcie_ops, sys,
|
|
&sys->resources,
|
|
&xilinx_pcie_msi_chip);
|
|
else
|
|
bus = pci_scan_root_bus(port->dev, sys->busnr,
|
|
&xilinx_pcie_ops, sys, &sys->resources);
|
|
return bus;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_parse_and_add_res - Add resources by parsing ranges
|
|
* @port: PCIe port information
|
|
*
|
|
* Return: '0' on success and error value on failure
|
|
*/
|
|
static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port)
|
|
{
|
|
struct device *dev = port->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct resource *mem;
|
|
resource_size_t offset;
|
|
struct of_pci_range_parser parser;
|
|
struct of_pci_range range;
|
|
struct resource_entry *win;
|
|
int err = 0, mem_resno = 0;
|
|
|
|
/* Get the ranges */
|
|
if (of_pci_range_parser_init(&parser, node)) {
|
|
dev_err(dev, "missing \"ranges\" property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Parse the ranges and add the resources found to the list */
|
|
for_each_of_pci_range(&parser, &range) {
|
|
|
|
if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
|
|
dev_err(dev, "Maximum memory resources exceeded\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
|
|
if (!mem) {
|
|
err = -ENOMEM;
|
|
goto free_resources;
|
|
}
|
|
|
|
of_pci_range_to_resource(&range, node, mem);
|
|
|
|
switch (mem->flags & IORESOURCE_TYPE_BITS) {
|
|
case IORESOURCE_MEM:
|
|
offset = range.cpu_addr - range.pci_addr;
|
|
mem_resno++;
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (err < 0) {
|
|
dev_warn(dev, "Invalid resource found %pR\n", mem);
|
|
continue;
|
|
}
|
|
|
|
err = request_resource(&iomem_resource, mem);
|
|
if (err)
|
|
goto free_resources;
|
|
|
|
pci_add_resource_offset(&port->resources, mem, offset);
|
|
}
|
|
|
|
/* Get the bus range */
|
|
if (of_pci_parse_bus_range(node, &port->bus_range)) {
|
|
u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
|
|
u8 last;
|
|
|
|
last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
|
|
XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
|
|
|
|
port->bus_range = (struct resource) {
|
|
.name = node->name,
|
|
.start = 0,
|
|
.end = last,
|
|
.flags = IORESOURCE_BUS,
|
|
};
|
|
}
|
|
|
|
/* Register bus resource */
|
|
pci_add_resource(&port->resources, &port->bus_range);
|
|
|
|
return 0;
|
|
|
|
free_resources:
|
|
release_child_resources(&iomem_resource);
|
|
resource_list_for_each_entry(win, &port->resources)
|
|
devm_kfree(dev, win->res);
|
|
pci_free_resource_list(&port->resources);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_parse_dt - Parse Device tree
|
|
* @port: PCIe port information
|
|
*
|
|
* Return: '0' on success and error value on failure
|
|
*/
|
|
static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
|
|
{
|
|
struct device *dev = port->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct resource regs;
|
|
const char *type;
|
|
int err;
|
|
|
|
type = of_get_property(node, "device_type", NULL);
|
|
if (!type || strcmp(type, "pci")) {
|
|
dev_err(dev, "invalid \"device_type\" %s\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = of_address_to_resource(node, 0, ®s);
|
|
if (err) {
|
|
dev_err(dev, "missing \"reg\" property\n");
|
|
return err;
|
|
}
|
|
|
|
port->reg_base = devm_ioremap_resource(dev, ®s);
|
|
if (IS_ERR(port->reg_base))
|
|
return PTR_ERR(port->reg_base);
|
|
|
|
port->irq = irq_of_parse_and_map(node, 0);
|
|
err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler,
|
|
IRQF_SHARED, "xilinx-pcie", port);
|
|
if (err) {
|
|
dev_err(dev, "unable to request irq %d\n", port->irq);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_probe - Probe function
|
|
* @pdev: Platform device pointer
|
|
*
|
|
* Return: '0' on success and error value on failure
|
|
*/
|
|
static int xilinx_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct xilinx_pcie_port *port;
|
|
struct hw_pci hw;
|
|
struct device *dev = &pdev->dev;
|
|
int err;
|
|
|
|
if (!dev->of_node)
|
|
return -ENODEV;
|
|
|
|
port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
|
|
if (!port)
|
|
return -ENOMEM;
|
|
|
|
port->dev = dev;
|
|
|
|
err = xilinx_pcie_parse_dt(port);
|
|
if (err) {
|
|
dev_err(dev, "Parsing DT failed\n");
|
|
return err;
|
|
}
|
|
|
|
xilinx_pcie_init_port(port);
|
|
|
|
err = xilinx_pcie_init_irq_domain(port);
|
|
if (err) {
|
|
dev_err(dev, "Failed creating IRQ Domain\n");
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Parse PCI ranges, configuration bus range and
|
|
* request their resources
|
|
*/
|
|
INIT_LIST_HEAD(&port->resources);
|
|
err = xilinx_pcie_parse_and_add_res(port);
|
|
if (err) {
|
|
dev_err(dev, "Failed adding resources\n");
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, port);
|
|
|
|
/* Register the device */
|
|
memset(&hw, 0, sizeof(hw));
|
|
hw = (struct hw_pci) {
|
|
.nr_controllers = 1,
|
|
.private_data = (void **)&port,
|
|
.setup = xilinx_pcie_setup,
|
|
.map_irq = of_irq_parse_and_map_pci,
|
|
.scan = xilinx_pcie_scan_bus,
|
|
.ops = &xilinx_pcie_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
xilinx_pcie_msi_chip.dev = port->dev;
|
|
#endif
|
|
pci_common_init_dev(dev, &hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_pcie_remove - Remove function
|
|
* @pdev: Platform device pointer
|
|
*
|
|
* Return: '0' always
|
|
*/
|
|
static int xilinx_pcie_remove(struct platform_device *pdev)
|
|
{
|
|
struct xilinx_pcie_port *port = platform_get_drvdata(pdev);
|
|
|
|
xilinx_pcie_free_irq_domain(port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id xilinx_pcie_of_match[] = {
|
|
{ .compatible = "xlnx,axi-pcie-host-1.00.a", },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver xilinx_pcie_driver = {
|
|
.driver = {
|
|
.name = "xilinx-pcie",
|
|
.of_match_table = xilinx_pcie_of_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = xilinx_pcie_probe,
|
|
.remove = xilinx_pcie_remove,
|
|
};
|
|
module_platform_driver(xilinx_pcie_driver);
|
|
|
|
MODULE_AUTHOR("Xilinx Inc");
|
|
MODULE_DESCRIPTION("Xilinx AXI PCIe driver");
|
|
MODULE_LICENSE("GPL v2");
|