forked from Minki/linux
10cdfe9f32
The R-Car Gen2 SoCs (R8A7790 and R8A7791) have several clocks that are too custom to be supported in a generic driver. Those clocks can be divided in two categories: - Fixed rate clocks with multiplier and divisor set according to boot mode configuration - Custom divider clocks with SoC-specific divider values This driver supports both. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
33 lines
1012 B
Plaintext
33 lines
1012 B
Plaintext
* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
|
|
|
|
The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
|
|
and several fixed ratio dividers.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: Must be one of
|
|
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
|
|
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
|
|
- "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
|
|
|
|
- reg: Base address and length of the memory resource used by the CPG
|
|
|
|
- clocks: Reference to the parent clock
|
|
- #clock-cells: Must be 1
|
|
- clock-output-names: The names of the clocks. Supported clocks are "main",
|
|
"pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
|
|
|
|
|
|
Example
|
|
-------
|
|
|
|
cpg_clocks: cpg_clocks@e6150000 {
|
|
compatible = "renesas,r8a7790-cpg-clocks",
|
|
"renesas,rcar-gen2-cpg-clocks";
|
|
reg = <0 0xe6150000 0 0x1000>;
|
|
clocks = <&extal_clk>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "main", "pll0, "pll1", "pll3",
|
|
"lb", "qspi", "sdh", "sd0", "sd1", "z";
|
|
};
|