forked from Minki/linux
6cff46f4bc
get_irq_desc() is a powerpc-specific version of irq_to_desc(). That is reason enough to remove it, but it also doesn't know about sparse irq_desc support which irq_to_desc() does (when we enable it). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
446 lines
11 KiB
C
446 lines
11 KiB
C
/*
|
|
* Common routines for Tundra Semiconductor TSI108 host bridge.
|
|
*
|
|
* 2004-2005 (c) Tundra Semiconductor Corp.
|
|
* Author: Alex Bounine (alexandreb@tundra.com)
|
|
* Author: Roy Zang (tie-fei.zang@freescale.com)
|
|
* Add pci interrupt router host
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc., 59
|
|
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/tsi108.h>
|
|
#include <asm/tsi108_pci.h>
|
|
#include <asm/tsi108_irq.h>
|
|
#include <asm/prom.h>
|
|
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
#define tsi_mk_config_addr(bus, devfunc, offset) \
|
|
((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
|
|
|
|
u32 tsi108_pci_cfg_base;
|
|
static u32 tsi108_pci_cfg_phys;
|
|
u32 tsi108_csr_vir_base;
|
|
static struct irq_host *pci_irq_host;
|
|
|
|
extern u32 get_vir_csrbase(void);
|
|
extern u32 tsi108_read_reg(u32 reg_offset);
|
|
extern void tsi108_write_reg(u32 reg_offset, u32 val);
|
|
|
|
int
|
|
tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
|
|
int offset, int len, u32 val)
|
|
{
|
|
volatile unsigned char *cfg_addr;
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
|
|
if (ppc_md.pci_exclude_device)
|
|
if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
|
|
devfunc, offset) |
|
|
(offset & 0x03));
|
|
|
|
#ifdef DEBUG
|
|
printk("PCI CFG write : ");
|
|
printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
|
|
printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
|
|
printk("data = 0x%08x\n", val);
|
|
#endif
|
|
|
|
switch (len) {
|
|
case 1:
|
|
out_8((u8 *) cfg_addr, val);
|
|
break;
|
|
case 2:
|
|
out_le16((u16 *) cfg_addr, val);
|
|
break;
|
|
default:
|
|
out_le32((u32 *) cfg_addr, val);
|
|
break;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
void tsi108_clear_pci_error(u32 pci_cfg_base)
|
|
{
|
|
u32 err_stat, err_addr, pci_stat;
|
|
|
|
/*
|
|
* Quietly clear PB and PCI error flags set as result
|
|
* of PCI/X configuration read requests.
|
|
*/
|
|
|
|
/* Read PB Error Log Registers */
|
|
|
|
err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
|
|
err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
|
|
|
|
if (err_stat & TSI108_PB_ERRCS_ES) {
|
|
/* Clear error flag */
|
|
tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
|
|
TSI108_PB_ERRCS_ES);
|
|
|
|
/* Clear read error reported in PB_ISR */
|
|
tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
|
|
TSI108_PB_ISR_PBS_RD_ERR);
|
|
|
|
/* Clear PCI/X bus cfg errors if applicable */
|
|
if ((err_addr & 0xFF000000) == pci_cfg_base) {
|
|
pci_stat =
|
|
tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
|
|
pci_stat);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
#define __tsi108_read_pci_config(x, addr, op) \
|
|
__asm__ __volatile__( \
|
|
" "op" %0,0,%1\n" \
|
|
"1: eieio\n" \
|
|
"2:\n" \
|
|
".section .fixup,\"ax\"\n" \
|
|
"3: li %0,-1\n" \
|
|
" b 2b\n" \
|
|
".section __ex_table,\"a\"\n" \
|
|
" .align 2\n" \
|
|
" .long 1b,3b\n" \
|
|
".text" \
|
|
: "=r"(x) : "r"(addr))
|
|
|
|
int
|
|
tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
|
int len, u32 * val)
|
|
{
|
|
volatile unsigned char *cfg_addr;
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
u32 temp;
|
|
|
|
if (ppc_md.pci_exclude_device)
|
|
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
|
|
devfn,
|
|
offset) | (offset &
|
|
0x03));
|
|
|
|
switch (len) {
|
|
case 1:
|
|
__tsi108_read_pci_config(temp, cfg_addr, "lbzx");
|
|
break;
|
|
case 2:
|
|
__tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
|
|
break;
|
|
default:
|
|
__tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
|
|
break;
|
|
}
|
|
|
|
*val = temp;
|
|
|
|
#ifdef DEBUG
|
|
if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
|
|
printk("PCI CFG read : ");
|
|
printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
|
|
printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
|
|
printk("data = 0x%x\n", *val);
|
|
}
|
|
#endif
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
void tsi108_clear_pci_cfg_error(void)
|
|
{
|
|
tsi108_clear_pci_error(tsi108_pci_cfg_phys);
|
|
}
|
|
|
|
static struct pci_ops tsi108_direct_pci_ops = {
|
|
.read = tsi108_direct_read_config,
|
|
.write = tsi108_direct_write_config,
|
|
};
|
|
|
|
int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
|
|
{
|
|
int len;
|
|
struct pci_controller *hose;
|
|
struct resource rsrc;
|
|
const int *bus_range;
|
|
int has_address = 0;
|
|
|
|
/* PCI Config mapping */
|
|
tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
|
|
tsi108_pci_cfg_phys = cfg_phys;
|
|
DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
|
|
tsi108_pci_cfg_base);
|
|
|
|
/* Fetch host bridge registers address */
|
|
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
|
|
|
|
/* Get bus range if any */
|
|
bus_range = of_get_property(dev, "bus-range", &len);
|
|
if (bus_range == NULL || len < 2 * sizeof(int)) {
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
" bus 0\n", dev->full_name);
|
|
}
|
|
|
|
hose = pcibios_alloc_controller(dev);
|
|
|
|
if (!hose) {
|
|
printk("PCI Host bridge init failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0;
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
(hose)->ops = &tsi108_direct_pci_ops;
|
|
|
|
printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
|
|
"Firmware bus number: %d->%d\n",
|
|
rsrc.start, hose->first_busno, hose->last_busno);
|
|
|
|
/* Interpret the "ranges" property */
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
|
pci_process_bridge_OF_ranges(hose, dev, primary);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Low level utility functions
|
|
*/
|
|
|
|
static void tsi108_pci_int_mask(u_int irq)
|
|
{
|
|
u_int irp_cfg;
|
|
int int_line = (irq - IRQ_PCI_INTAD_BASE);
|
|
|
|
irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
|
|
mb();
|
|
irp_cfg |= (1 << int_line); /* INTx_DIR = output */
|
|
irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
|
|
mb();
|
|
irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
|
|
}
|
|
|
|
static void tsi108_pci_int_unmask(u_int irq)
|
|
{
|
|
u_int irp_cfg;
|
|
int int_line = (irq - IRQ_PCI_INTAD_BASE);
|
|
|
|
irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
|
|
mb();
|
|
irp_cfg &= ~(1 << int_line);
|
|
irp_cfg |= (3 << (8 + (int_line * 2)));
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
|
|
mb();
|
|
}
|
|
|
|
static void init_pci_source(void)
|
|
{
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
|
|
0x0000ff00);
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
|
|
TSI108_PCI_IRP_ENABLE_P_INT);
|
|
mb();
|
|
}
|
|
|
|
static inline unsigned int get_pci_source(void)
|
|
{
|
|
u_int temp = 0;
|
|
int irq = -1;
|
|
int i;
|
|
u_int pci_irp_stat;
|
|
static int mask = 0;
|
|
|
|
/* Read PCI/X block interrupt status register */
|
|
pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
|
|
mb();
|
|
|
|
if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
|
|
/* Process Interrupt from PCI bus INTA# - INTD# lines */
|
|
temp =
|
|
tsi108_read_reg(TSI108_PCI_OFFSET +
|
|
TSI108_PCI_IRP_INTAD) & 0xf;
|
|
mb();
|
|
for (i = 0; i < 4; i++, mask++) {
|
|
if (temp & (1 << mask % 4)) {
|
|
irq = IRQ_PCI_INTA + mask % 4;
|
|
mask++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Disable interrupts from PCI block */
|
|
temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
|
|
temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
|
|
mb();
|
|
(void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
|
|
mb();
|
|
}
|
|
#ifdef DEBUG
|
|
else {
|
|
printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
|
|
pci_irp_stat =
|
|
tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
|
|
temp =
|
|
tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
|
|
mb();
|
|
printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
|
|
temp =
|
|
tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
|
|
mb();
|
|
printk("cfg_ctl=0x%08x ", temp);
|
|
temp =
|
|
tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
|
|
mb();
|
|
printk("irp_enable=0x%08x\n", temp);
|
|
}
|
|
#endif /* end of DEBUG */
|
|
|
|
return irq;
|
|
}
|
|
|
|
|
|
/*
|
|
* Linux descriptor level callbacks
|
|
*/
|
|
|
|
static void tsi108_pci_irq_enable(u_int irq)
|
|
{
|
|
tsi108_pci_int_unmask(irq);
|
|
}
|
|
|
|
static void tsi108_pci_irq_disable(u_int irq)
|
|
{
|
|
tsi108_pci_int_mask(irq);
|
|
}
|
|
|
|
static void tsi108_pci_irq_ack(u_int irq)
|
|
{
|
|
tsi108_pci_int_mask(irq);
|
|
}
|
|
|
|
static void tsi108_pci_irq_end(u_int irq)
|
|
{
|
|
tsi108_pci_int_unmask(irq);
|
|
|
|
/* Enable interrupts from PCI block */
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
|
|
tsi108_read_reg(TSI108_PCI_OFFSET +
|
|
TSI108_PCI_IRP_ENABLE) |
|
|
TSI108_PCI_IRP_ENABLE_P_INT);
|
|
mb();
|
|
}
|
|
|
|
/*
|
|
* Interrupt controller descriptor for cascaded PCI interrupt controller.
|
|
*/
|
|
|
|
static struct irq_chip tsi108_pci_irq = {
|
|
.typename = "tsi108_PCI_int",
|
|
.mask = tsi108_pci_irq_disable,
|
|
.ack = tsi108_pci_irq_ack,
|
|
.end = tsi108_pci_irq_end,
|
|
.unmask = tsi108_pci_irq_enable,
|
|
};
|
|
|
|
static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
|
|
u32 *intspec, unsigned int intsize,
|
|
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
|
|
{
|
|
*out_hwirq = intspec[0];
|
|
*out_flags = IRQ_TYPE_LEVEL_HIGH;
|
|
return 0;
|
|
}
|
|
|
|
static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
|
|
irq_hw_number_t hw)
|
|
{ unsigned int irq;
|
|
DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
|
|
if ((virq >= 1) && (virq <= 4)){
|
|
irq = virq + IRQ_PCI_INTAD_BASE - 1;
|
|
irq_to_desc(irq)->status |= IRQ_LEVEL;
|
|
set_irq_chip(irq, &tsi108_pci_irq);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_host_ops pci_irq_host_ops = {
|
|
.map = pci_irq_host_map,
|
|
.xlate = pci_irq_host_xlate,
|
|
};
|
|
|
|
/*
|
|
* Exported functions
|
|
*/
|
|
|
|
/*
|
|
* The Tsi108 PCI interrupts initialization routine.
|
|
*
|
|
* The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
|
|
* to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
|
|
* PCI block has to be treated as a cascaded interrupt controller connected
|
|
* to the MPIC.
|
|
*/
|
|
|
|
void __init tsi108_pci_int_init(struct device_node *node)
|
|
{
|
|
DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
|
|
|
|
pci_irq_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
|
|
0, &pci_irq_host_ops, 0);
|
|
if (pci_irq_host == NULL) {
|
|
printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
|
|
return;
|
|
}
|
|
|
|
init_pci_source();
|
|
}
|
|
|
|
void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned int cascade_irq = get_pci_source();
|
|
if (cascade_irq != NO_IRQ)
|
|
generic_handle_irq(cascade_irq);
|
|
desc->chip->eoi(irq);
|
|
}
|