linux/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
Qii Wang ea3bfeec6b dt-bindings: i3c: cdns: Use correct cells for I2C device
I2C device reg should be "reg = <0x52 0x0 0x10>;"

Fixes: e29d0d9c90 ("dt-bindings: i3c: Document Cadence I3C master bindings")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-07-04 11:58:31 +02:00

44 lines
1.2 KiB
Plaintext

Bindings for cadence I3C master block
=====================================
Required properties:
--------------------
- compatible: shall be "cdns,i3c-master"
- clocks: shall reference the pclk and sysclk
- clock-names: shall contain "pclk" and "sysclk"
- interrupts: the interrupt line connected to this I3C master
- reg: I3C master registers
Mandatory properties defined by the generic binding (see
Documentation/devicetree/bindings/i3c/i3c.txt for more details):
- #address-cells: shall be set to 1
- #size-cells: shall be set to 0
Optional properties defined by the generic binding (see
Documentation/devicetree/bindings/i3c/i3c.txt for more details):
- i2c-scl-hz
- i3c-scl-hz
I3C device connected on the bus follow the generic description (see
Documentation/devicetree/bindings/i3c/i3c.txt for more details).
Example:
i3c-master@0d040000 {
compatible = "cdns,i3c-master";
clocks = <&coreclock>, <&i3csysclock>;
clock-names = "pclk", "sysclk";
interrupts = <3 0>;
reg = <0x0d040000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
i2c-scl-hz = <100000>;
nunchuk: nunchuk@52 {
compatible = "nintendo,nunchuk";
reg = <0x52 0x0 0x10>;
};
};