linux/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
Guodong Xu 7d8c36674b arm64: dts: hi3660-hikey960: add nodes for WiFi
Add nodes for WiFi. HiKey960 is using TI WL1837MOD module.

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-06-16 15:31:21 +01:00

244 lines
4.5 KiB
Plaintext

/*
* dts file for Hisilicon HiKey960 Development Board
*
* Copyright (C) 2016, Hisilicon Ltd.
*
*/
/dts-v1/;
#include "hi3660.dtsi"
#include "hikey960-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "HiKey960";
compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
aliases {
mshc1 = &dwmmc1;
mshc2 = &dwmmc2;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
serial6 = &uart6;
};
chosen {
stdout-path = "serial6:115200n8";
};
memory@0 {
device_type = "memory";
/* rewrite this at bootloader */
reg = <0x0 0x0 0x0 0x0>;
};
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
power {
wakeup-source;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
};
};
leds {
compatible = "gpio-leds";
user_led1 {
label = "user_led1";
/* gpio_150_user_led1 */
gpios = <&gpio18 6 0>;
linux,default-trigger = "heartbeat";
};
user_led2 {
label = "user_led2";
/* gpio_151_user_led2 */
gpios = <&gpio18 7 0>;
linux,default-trigger = "mmc0";
};
user_led3 {
label = "user_led3";
/* gpio_189_user_led3 */
gpios = <&gpio23 5 0>;
default-state = "off";
};
user_led4 {
label = "user_led4";
/* gpio_190_user_led4 */
gpios = <&gpio23 6 0>;
linux,default-trigger = "cpu0";
};
wlan_active_led {
label = "wifi_active";
/* gpio_205_wifi_active */
gpios = <&gpio25 5 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
bt_active_led {
label = "bt_active";
gpios = <&gpio25 7 0>;
/* gpio_207_user_led1 */
linux,default-trigger = "hci0-power";
default-state = "off";
};
};
pmic: pmic@fff34000 {
compatible = "hisilicon,hi6421v530-pmic";
reg = <0x0 0xfff34000 0x0 0x1000>;
interrupt-controller;
#interrupt-cells = <2>;
regulators {
ldo3: LDO3 { /* HDMI */
regulator-name = "VOUT3_1V85";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2200000>;
regulator-enable-ramp-delay = <120>;
};
ldo9: LDO9 { /* SDCARD I/O */
regulator-name = "VOUT9_1V8_2V95";
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <240>;
};
ldo11: LDO11 { /* Low Speed Connector */
regulator-name = "VOUT11_1V8_2V95";
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <240>;
};
ldo15: LDO15 { /* UFS VCC */
regulator-name = "VOUT15_3V0";
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
regulator-enable-ramp-delay = <120>;
};
ldo16: LDO16 { /* SD VDD */
regulator-name = "VOUT16_2V95";
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <360>;
};
};
};
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO_051_WIFI_EN */
gpio = <&gpio6 3 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
enable-active-high;
};
};
&i2c0 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
&i2c1 {
status = "okay";
adv7533: adv7533@39 {
status = "ok";
compatible = "adi,adv7533";
reg = <0x39>;
};
};
&i2c7 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
&uart3 {
/* On Low speed expansion */
label = "LS-UART0";
status = "okay";
};
&uart4 {
status = "okay";
bluetooth {
compatible = "ti,wl1837-st";
enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
max-speed = <921600>;
};
};
&uart6 {
/* On Low speed expansion */
label = "LS-UART1";
status = "okay";
};
&spi2 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
&spi3 {
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
&dwmmc1 {
vmmc-supply = <&ldo16>;
vqmmc-supply = <&ldo9>;
status = "okay";
};
&dwmmc2 { /* WIFI */
broken-cd;
/* WL_EN */
vmmc-supply = <&wlan_en>;
ti,non-removable;
non-removable;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "ok";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>; /* sdio func num */
/* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
interrupt-parent = <&gpio22>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
};
};