linux/tools/perf/Makefile.config
James Clark bc9e7fe313 perf python: Fix build when PYTHON_CONFIG is user supplied
The previous change to Python autodetection had a small mistake where
the auto value was used to determine the Python binary, rather than the
user supplied value. The Python binary is only used for one part of the
build process, rather than the final linking, so it was producing
correct builds in most scenarios, especially when the auto detected
value matched what the user wanted, or the system only had a valid set
of Pythons.

Change it so that the Python binary path is derived from either the
PYTHON_CONFIG value or PYTHON value, depending on what is specified by
the user. This was the original intention.

This error was spotted in a build failure an odd cross compilation
environment after commit 4c41cb46a7 ("perf python: Prefer
python3") was merged.

Fixes: 630af16eee ("perf tools: Use Python devtools for version autodetection rather than runtime")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220728093946.1337642-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27 11:55:16 -03:00

1359 lines
41 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0-only
ifeq ($(src-perf),)
src-perf := $(srctree)/tools/perf
endif
ifeq ($(obj-perf),)
obj-perf := $(OUTPUT)
endif
ifneq ($(obj-perf),)
obj-perf := $(abspath $(obj-perf))/
endif
$(shell printf "" > $(OUTPUT).config-detected)
detected = $(shell echo "$(1)=y" >> $(OUTPUT).config-detected)
detected_var = $(shell echo "$(1)=$($(1))" >> $(OUTPUT).config-detected)
CFLAGS := $(EXTRA_CFLAGS) $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))
HOSTCFLAGS := $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))
include $(srctree)/tools/scripts/Makefile.arch
$(call detected_var,SRCARCH)
NO_PERF_REGS := 1
ifneq ($(NO_SYSCALL_TABLE),1)
NO_SYSCALL_TABLE := 1
ifeq ($(SRCARCH),x86)
ifeq (${IS_64_BIT}, 1)
NO_SYSCALL_TABLE := 0
endif
else
ifeq ($(SRCARCH),$(filter $(SRCARCH),powerpc arm64 s390 mips))
NO_SYSCALL_TABLE := 0
endif
endif
ifneq ($(NO_SYSCALL_TABLE),1)
CFLAGS += -DHAVE_SYSCALL_TABLE_SUPPORT
endif
endif
# Additional ARCH settings for ppc
ifeq ($(SRCARCH),powerpc)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/powerpc/include/generated
LIBUNWIND_LIBS := -lunwind -lunwind-ppc64
endif
# Additional ARCH settings for x86
ifeq ($(SRCARCH),x86)
$(call detected,CONFIG_X86)
ifeq (${IS_64_BIT}, 1)
CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -I$(OUTPUT)arch/x86/include/generated
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
LIBUNWIND_LIBS = -lunwind-x86_64 -lunwind -llzma
$(call detected,CONFIG_X86_64)
else
LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind
endif
NO_PERF_REGS := 0
endif
ifeq ($(SRCARCH),arm)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif
ifeq ($(SRCARCH),arm64)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/arm64/include/generated
LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
endif
ifeq ($(SRCARCH),riscv)
NO_PERF_REGS := 0
endif
ifeq ($(SRCARCH),csky)
NO_PERF_REGS := 0
endif
ifeq ($(ARCH),s390)
NO_PERF_REGS := 0
CFLAGS += -fPIC -I$(OUTPUT)arch/s390/include/generated
endif
ifeq ($(ARCH),mips)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/mips/include/generated
LIBUNWIND_LIBS = -lunwind -lunwind-mips
endif
ifeq ($(NO_PERF_REGS),0)
$(call detected,CONFIG_PERF_REGS)
endif
# So far there's only x86 and arm libdw unwind support merged in perf.
# Disable it on all other architectures in case libdw unwind
# support is detected in system. Add supported architectures
# to the check.
ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390 csky riscv))
NO_LIBDW_DWARF_UNWIND := 1
endif
ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
endif
#
# For linking with debug library, run like:
#
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
#
libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code))
define libunwind_arch_set_flags_code
FEATURE_CHECK_CFLAGS-libunwind-$(1) = -I$(LIBUNWIND_DIR)/include
FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib
endef
ifdef LIBUNWIND_DIR
LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include
LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64
$(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch)))
endif
# Set per-feature check compilation flags
FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
FEATURE_CHECK_LDFLAGS-libunwind-arm += -lunwind -lunwind-arm
FEATURE_CHECK_LDFLAGS-libunwind-aarch64 += -lunwind -lunwind-aarch64
FEATURE_CHECK_LDFLAGS-libunwind-x86 += -lunwind -llzma -lunwind-x86
FEATURE_CHECK_LDFLAGS-libunwind-x86_64 += -lunwind -llzma -lunwind-x86_64
FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto
ifdef CSINCLUDES
LIBOPENCSD_CFLAGS := -I$(CSINCLUDES)
endif
OPENCSDLIBS := -lopencsd_c_api
ifeq ($(findstring -static,${LDFLAGS}),-static)
OPENCSDLIBS += -lopencsd -lstdc++
endif
ifdef CSLIBS
LIBOPENCSD_LDFLAGS := -L$(CSLIBS)
endif
FEATURE_CHECK_CFLAGS-libopencsd := $(LIBOPENCSD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libopencsd := $(LIBOPENCSD_LDFLAGS) $(OPENCSDLIBS)
ifeq ($(NO_PERF_REGS),0)
CFLAGS += -DHAVE_PERF_REGS_SUPPORT
endif
# for linking with debug library, run like:
# make DEBUG=1 LIBDW_DIR=/opt/libdw/
ifdef LIBDW_DIR
LIBDW_CFLAGS := -I$(LIBDW_DIR)/include
LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
endif
DWARFLIBS := -ldw
ifeq ($(findstring -static,${LDFLAGS}),-static)
DWARFLIBS += -lelf -lebl -ldl -lz -llzma -lbz2
endif
FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS)
FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) $(DWARFLIBS)
# for linking with debug library, run like:
# make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
ifdef LIBBABELTRACE_DIR
LIBBABELTRACE_CFLAGS := -I$(LIBBABELTRACE_DIR)/include
LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
ifdef LIBZSTD_DIR
LIBZSTD_CFLAGS := -I$(LIBZSTD_DIR)/lib
LIBZSTD_LDFLAGS := -L$(LIBZSTD_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libzstd := $(LIBZSTD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libzstd := $(LIBZSTD_LDFLAGS)
FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi
# include ARCH specific config
-include $(src-perf)/arch/$(SRCARCH)/Makefile
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
endif
include $(srctree)/tools/scripts/utilities.mak
ifeq ($(call get-executable,$(FLEX)),)
dummy := $(error Error: $(FLEX) is missing on this system, please install it)
endif
ifeq ($(call get-executable,$(BISON)),)
dummy := $(error Error: $(BISON) is missing on this system, please install it)
endif
ifneq ($(OUTPUT),)
ifeq ($(shell expr $(shell $(BISON) --version | grep bison | sed -e 's/.\+ \([0-9]\+\).\([0-9]\+\).\([0-9]\+\)/\1\2\3/g') \>\= 371), 1)
BISON_FILE_PREFIX_MAP := --file-prefix-map=$(OUTPUT)=
endif
endif
# Treat warnings as errors unless directed not to
ifneq ($(WERROR),0)
CORE_CFLAGS += -Werror
CXXFLAGS += -Werror
HOSTCFLAGS += -Werror
endif
ifndef DEBUG
DEBUG := 0
endif
ifeq ($(DEBUG),0)
ifeq ($(CC_NO_CLANG), 0)
CORE_CFLAGS += -O3
else
CORE_CFLAGS += -O6
endif
endif
ifdef PARSER_DEBUG
PARSER_DEBUG_BISON := -t
PARSER_DEBUG_FLEX := -d
CFLAGS += -DPARSER_DEBUG
$(call detected_var,PARSER_DEBUG_BISON)
$(call detected_var,PARSER_DEBUG_FLEX)
endif
# Try different combinations to accommodate systems that only have
# python[2][3]-config in weird combinations in the following order of
# priority from lowest to highest:
# * python2-config as per pep-0394.
# * python-config
# * python3-config
# * $(PYTHON)-config (If PYTHON is user supplied but PYTHON_CONFIG isn't)
#
PYTHON_AUTO := python-config
PYTHON_AUTO := $(if $(call get-executable,python2-config),python2-config,$(PYTHON_AUTO))
PYTHON_AUTO := $(if $(call get-executable,python-config),python-config,$(PYTHON_AUTO))
PYTHON_AUTO := $(if $(call get-executable,python3-config),python3-config,$(PYTHON_AUTO))
# If PYTHON is defined but PYTHON_CONFIG isn't, then take $(PYTHON)-config as if it was the user
# supplied value for PYTHON_CONFIG. Because it's "user supplied", error out if it doesn't exist.
ifdef PYTHON
ifndef PYTHON_CONFIG
PYTHON_CONFIG_AUTO := $(call get-executable,$(PYTHON)-config)
PYTHON_CONFIG := $(if $(PYTHON_CONFIG_AUTO),$(PYTHON_CONFIG_AUTO),\
$(call $(error $(PYTHON)-config not found)))
endif
endif
# Select either auto detected python and python-config or use user supplied values if they are
# defined. get-executable-or-default fails with an error if the first argument is supplied but
# doesn't exist.
override PYTHON_CONFIG := $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON_AUTO))
override PYTHON := $(call get-executable-or-default,PYTHON,$(subst -config,,$(PYTHON_CONFIG)))
grep-libs = $(filter -l%,$(1))
strip-libs = $(filter-out -l%,$(1))
PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
# Python 3.8 changed the output of `python-config --ldflags` to not include the
# '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for
# libpython fails if that flag is not included in LDFLAGS
ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0)
PYTHON_CONFIG_LDFLAGS := --ldflags --embed
else
PYTHON_CONFIG_LDFLAGS := --ldflags
endif
ifdef PYTHON_CONFIG
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null)
PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null)
FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
ifeq ($(CC_NO_CLANG), 0)
PYTHON_EMBED_CCOPTS := $(filter-out -ffat-lto-objects, $(PYTHON_EMBED_CCOPTS))
endif
endif
FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)
FEATURE_CHECK_LDFLAGS-libaio = -lrt
CORE_CFLAGS += -fno-omit-frame-pointer
CORE_CFLAGS += -ggdb3
CORE_CFLAGS += -funwind-tables
CORE_CFLAGS += -Wall
CORE_CFLAGS += -Wextra
CORE_CFLAGS += -std=gnu99
CXXFLAGS += -std=gnu++14 -fno-exceptions -fno-rtti
CXXFLAGS += -Wall
CXXFLAGS += -fno-omit-frame-pointer
CXXFLAGS += -ggdb3
CXXFLAGS += -funwind-tables
CXXFLAGS += -Wno-strict-aliasing
HOSTCFLAGS += -Wall
HOSTCFLAGS += -Wextra
# Enforce a non-executable stack, as we may regress (again) in the future by
# adding assembler files missing the .GNU-stack linker note.
LDFLAGS += -Wl,-z,noexecstack
EXTLIBS = -lpthread -lrt -lm -ldl
ifneq ($(TCMALLOC),)
CFLAGS += -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free
EXTLIBS += -ltcmalloc
endif
ifeq ($(FEATURES_DUMP),)
# We will display at the end of this Makefile.config, using $(call feature_display_entries),
# as we may retry some feature detection here.
FEATURE_DISPLAY_DEFERRED := 1
include $(srctree)/tools/build/Makefile.feature
else
include $(FEATURES_DUMP)
endif
ifeq ($(feature-stackprotector-all), 1)
CORE_CFLAGS += -fstack-protector-all
endif
ifeq ($(DEBUG),0)
ifeq ($(feature-fortify-source), 1)
CORE_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2
endif
endif
INC_FLAGS += -I$(srctree)/tools/lib/perf/include
INC_FLAGS += -I$(src-perf)/util/include
INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include
INC_FLAGS += -I$(srctree)/tools/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi
INC_FLAGS += -I$(srctree)/tools/include/uapi
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/
# $(obj-perf) for generated common-cmds.h
# $(obj-perf)/util for generated bison/flex headers
ifneq ($(OUTPUT),)
INC_FLAGS += -I$(obj-perf)/util
INC_FLAGS += -I$(obj-perf)
endif
INC_FLAGS += -I$(src-perf)/util
INC_FLAGS += -I$(src-perf)
INC_FLAGS += -I$(srctree)/tools/lib/
CORE_CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
CFLAGS += $(CORE_CFLAGS) $(INC_FLAGS)
CXXFLAGS += $(INC_FLAGS)
LIBPERF_CFLAGS := $(CORE_CFLAGS) $(EXTRA_CFLAGS)
ifeq ($(feature-pthread-attr-setaffinity-np), 1)
CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
endif
ifeq ($(feature-pthread-barrier), 1)
CFLAGS += -DHAVE_PTHREAD_BARRIER
endif
ifndef NO_BIONIC
$(call feature_check,bionic)
ifeq ($(feature-bionic), 1)
BIONIC := 1
CFLAGS += -DLACKS_SIGQUEUE_PROTOTYPE
CFLAGS += -DLACKS_OPEN_MEMSTREAM_PROTOTYPE
EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
endif
endif
ifeq ($(feature-eventfd), 1)
CFLAGS += -DHAVE_EVENTFD_SUPPORT
endif
ifeq ($(feature-get_current_dir_name), 1)
CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
endif
ifeq ($(feature-gettid), 1)
CFLAGS += -DHAVE_GETTID
endif
ifeq ($(feature-file-handle), 1)
CFLAGS += -DHAVE_FILE_HANDLE
endif
ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
NO_LIBBPF := 1
NO_JVMTI := 1
else
ifeq ($(feature-libelf), 0)
ifeq ($(feature-glibc), 1)
LIBC_SUPPORT := 1
endif
ifeq ($(BIONIC),1)
LIBC_SUPPORT := 1
endif
ifeq ($(LIBC_SUPPORT),1)
msg := $(warning No libelf found. Disables 'probe' tool, jvmti and BPF support in 'perf record'. Please install libelf-dev, libelf-devel or elfutils-libelf-devel);
NO_LIBELF := 1
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
NO_LIBBPF := 1
NO_JVMTI := 1
else
ifneq ($(filter s% -fsanitize=address%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libasan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libasan found, please install libasan);
endif
endif
ifneq ($(filter s% -fsanitize=undefined%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libubsan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libubsan found, please install libubsan);
endif
endif
ifneq ($(filter s% -static%,$(LDFLAGS),),)
msg := $(error No static glibc found, please install glibc-static);
else
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
endif
endif
else
ifndef NO_LIBDW_DWARF_UNWIND
ifneq ($(feature-libdw-dwarf-unwind),1)
NO_LIBDW_DWARF_UNWIND := 1
msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR);
endif
endif
ifneq ($(feature-dwarf), 1)
ifndef NO_DWARF
msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
NO_DWARF := 1
endif
else
ifneq ($(feature-dwarf_getlocations), 1)
msg := $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157);
else
CFLAGS += -DHAVE_DWARF_GETLOCATIONS_SUPPORT
endif # dwarf_getlocations
endif # Dwarf support
endif # libelf support
endif # NO_LIBELF
ifeq ($(feature-glibc), 1)
CFLAGS += -DHAVE_GLIBC_SUPPORT
endif
ifeq ($(feature-libaio), 1)
ifndef NO_AIO
CFLAGS += -DHAVE_AIO_SUPPORT
endif
endif
ifdef NO_DWARF
NO_LIBDW_DWARF_UNWIND := 1
endif
ifeq ($(feature-sched_getcpu), 1)
CFLAGS += -DHAVE_SCHED_GETCPU_SUPPORT
endif
ifeq ($(feature-setns), 1)
CFLAGS += -DHAVE_SETNS_SUPPORT
$(call detected,CONFIG_SETNS)
endif
ifdef CORESIGHT
$(call feature_check,libopencsd)
ifeq ($(feature-libopencsd), 1)
CFLAGS += -DHAVE_CSTRACE_SUPPORT $(LIBOPENCSD_CFLAGS)
ifeq ($(feature-reallocarray), 0)
CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
endif
LDFLAGS += $(LIBOPENCSD_LDFLAGS)
EXTLIBS += $(OPENCSDLIBS)
$(call detected,CONFIG_LIBOPENCSD)
ifdef CSTRACE_RAW
CFLAGS += -DCS_DEBUG_RAW
ifeq (${CSTRACE_RAW}, packed)
CFLAGS += -DCS_RAW_PACKED
endif
endif
else
dummy := $(error Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1)
endif
endif
ifndef NO_LIBELF
CFLAGS += -DHAVE_LIBELF_SUPPORT
EXTLIBS += -lelf
$(call detected,CONFIG_LIBELF)
ifeq ($(feature-libelf-getphdrnum), 1)
CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
endif
ifeq ($(feature-libelf-gelf_getnote), 1)
CFLAGS += -DHAVE_GELF_GETNOTE_SUPPORT
else
msg := $(warning gelf_getnote() not found on libelf, SDT support disabled);
endif
ifeq ($(feature-libelf-getshdrstrndx), 1)
CFLAGS += -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT
endif
ifndef NO_LIBDEBUGINFOD
$(call feature_check,libdebuginfod)
ifeq ($(feature-libdebuginfod), 1)
CFLAGS += -DHAVE_DEBUGINFOD_SUPPORT
EXTLIBS += -ldebuginfod
endif
endif
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled);
NO_DWARF := 1
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
LDFLAGS += $(LIBDW_LDFLAGS)
EXTLIBS += ${DWARFLIBS}
$(call detected,CONFIG_DWARF)
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF
ifndef NO_LIBBPF
ifeq ($(feature-bpf), 1)
CFLAGS += -DHAVE_LIBBPF_SUPPORT
$(call detected,CONFIG_LIBBPF)
# detecting libbpf without LIBBPF_DYNAMIC, so make VF=1 shows libbpf detection status
$(call feature_check,libbpf)
ifdef LIBBPF_DYNAMIC
ifeq ($(feature-libbpf), 1)
EXTLIBS += -lbpf
$(call detected,CONFIG_LIBBPF_DYNAMIC)
$(call feature_check,libbpf-btf__load_from_kernel_by_id)
ifeq ($(feature-libbpf-btf__load_from_kernel_by_id), 1)
CFLAGS += -DHAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
endif
$(call feature_check,libbpf-bpf_prog_load)
ifeq ($(feature-libbpf-bpf_prog_load), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_PROG_LOAD
endif
$(call feature_check,libbpf-bpf_object__next_program)
ifeq ($(feature-libbpf-bpf_object__next_program), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_PROGRAM
endif
$(call feature_check,libbpf-bpf_object__next_map)
ifeq ($(feature-libbpf-bpf_object__next_map), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_MAP
endif
$(call feature_check,libbpf-btf__raw_data)
ifeq ($(feature-libbpf-btf__raw_data), 1)
CFLAGS += -DHAVE_LIBBPF_BTF__RAW_DATA
endif
$(call feature_check,libbpf-bpf_map_create)
ifeq ($(feature-libbpf-bpf_map_create), 1)
CFLAGS += -DHAVE_LIBBPF_BPF_MAP_CREATE
endif
else
dummy := $(error Error: No libbpf devel library found, please install libbpf-devel);
endif
else
CFLAGS += -DHAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
CFLAGS += -DHAVE_LIBBPF_BPF_PROG_LOAD
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_PROGRAM
CFLAGS += -DHAVE_LIBBPF_BPF_OBJECT__NEXT_MAP
CFLAGS += -DHAVE_LIBBPF_BTF__RAW_DATA
CFLAGS += -DHAVE_LIBBPF_BPF_MAP_CREATE
endif
endif
ifndef NO_DWARF
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_BPF_PROLOGUE
$(call detected,CONFIG_BPF_PROLOGUE)
else
msg := $(warning BPF prologue is not supported by architecture $(SRCARCH), missing regs_query_register_offset());
endif
else
msg := $(warning DWARF support is off, BPF prologue is disabled);
endif
endif # NO_LIBBPF
endif # NO_LIBELF
ifndef NO_SDT
ifneq ($(feature-sdt), 1)
msg := $(warning No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev);
NO_SDT := 1;
else
CFLAGS += -DHAVE_SDT_EVENT
$(call detected,CONFIG_SDT_EVENT)
endif
endif
ifdef PERF_HAVE_JITDUMP
ifndef NO_LIBELF
$(call detected,CONFIG_JITDUMP)
CFLAGS += -DHAVE_JITDUMP
endif
endif
ifeq ($(SRCARCH),powerpc)
ifndef NO_DWARF
CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
endif
endif
ifndef NO_LIBUNWIND
have_libunwind :=
$(call feature_check,libunwind-x86)
ifeq ($(feature-libunwind-x86), 1)
$(call detected,CONFIG_LIBUNWIND_X86)
CFLAGS += -DHAVE_LIBUNWIND_X86_SUPPORT
LDFLAGS += -lunwind-x86
EXTLIBS_LIBUNWIND += -lunwind-x86
have_libunwind = 1
endif
$(call feature_check,libunwind-aarch64)
ifeq ($(feature-libunwind-aarch64), 1)
$(call detected,CONFIG_LIBUNWIND_AARCH64)
CFLAGS += -DHAVE_LIBUNWIND_AARCH64_SUPPORT
LDFLAGS += -lunwind-aarch64
EXTLIBS_LIBUNWIND += -lunwind-aarch64
have_libunwind = 1
$(call feature_check,libunwind-debug-frame-aarch64)
ifneq ($(feature-libunwind-debug-frame-aarch64), 1)
msg := $(warning No debug_frame support found in libunwind-aarch64);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME_AARCH64
endif
endif
ifneq ($(feature-libunwind), 1)
msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR);
NO_LOCAL_LIBUNWIND := 1
else
have_libunwind := 1
$(call detected,CONFIG_LOCAL_LIBUNWIND)
endif
ifneq ($(have_libunwind), 1)
NO_LIBUNWIND := 1
endif
else
NO_LOCAL_LIBUNWIND := 1
endif
ifndef NO_LIBBPF
ifneq ($(feature-bpf), 1)
msg := $(warning BPF API too old. Please install recent kernel headers. BPF support in 'perf record' is disabled.)
NO_LIBBPF := 1
endif
endif
ifdef BUILD_BPF_SKEL
$(call feature_check,clang-bpf-co-re)
ifeq ($(feature-clang-bpf-co-re), 0)
dummy := $(error Error: clang too old/not installed. Please install recent clang to build with BUILD_BPF_SKEL)
endif
ifeq ($(filter -DHAVE_LIBBPF_SUPPORT, $(CFLAGS)),)
dummy := $(error Error: BPF skeleton support requires libbpf)
endif
$(call detected,CONFIG_PERF_BPF_SKEL)
CFLAGS += -DHAVE_BPF_SKEL
endif
dwarf-post-unwind := 1
dwarf-post-unwind-text := BUG
# setup DWARF post unwinder
ifdef NO_LIBUNWIND
ifdef NO_LIBDW_DWARF_UNWIND
msg := $(warning Disabling post unwind, no support found.);
dwarf-post-unwind := 0
else
dwarf-post-unwind-text := libdw
$(call detected,CONFIG_LIBDW_DWARF_UNWIND)
endif
else
dwarf-post-unwind-text := libunwind
$(call detected,CONFIG_LIBUNWIND)
# Enable libunwind support by default.
ifndef NO_LIBDW_DWARF_UNWIND
NO_LIBDW_DWARF_UNWIND := 1
endif
endif
ifeq ($(dwarf-post-unwind),1)
CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT
$(call detected,CONFIG_DWARF_UNWIND)
else
NO_DWARF_UNWIND := 1
endif
ifndef NO_LOCAL_LIBUNWIND
ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64))
$(call feature_check,libunwind-debug-frame)
ifneq ($(feature-libunwind-debug-frame), 1)
msg := $(warning No debug_frame support found in libunwind);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
else
# non-ARM has no dwarf_find_debug_frame() function:
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
EXTLIBS += $(LIBUNWIND_LIBS)
LDFLAGS += $(LIBUNWIND_LIBS)
endif
ifeq ($(findstring -static,${LDFLAGS}),-static)
# gcc -static links libgcc_eh which contans piece of libunwind
LIBUNWIND_LDFLAGS += -Wl,--allow-multiple-definition
endif
ifndef NO_LIBUNWIND
CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
CFLAGS += $(LIBUNWIND_CFLAGS)
LDFLAGS += $(LIBUNWIND_LDFLAGS)
EXTLIBS += $(EXTLIBS_LIBUNWIND)
endif
ifeq ($(NO_SYSCALL_TABLE),0)
$(call detected,CONFIG_TRACE)
else
ifndef NO_LIBAUDIT
$(call feature_check,libaudit)
ifneq ($(feature-libaudit), 1)
msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
NO_LIBAUDIT := 1
else
CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
EXTLIBS += -laudit
$(call detected,CONFIG_TRACE)
endif
endif
endif
ifndef NO_LIBCRYPTO
ifneq ($(feature-libcrypto), 1)
msg := $(warning No libcrypto.h found, disables jitted code injection, please install openssl-devel or libssl-dev);
NO_LIBCRYPTO := 1
else
CFLAGS += -DHAVE_LIBCRYPTO_SUPPORT
EXTLIBS += -lcrypto
$(call detected,CONFIG_CRYPTO)
endif
endif
ifdef NO_NEWT
NO_SLANG=1
endif
ifndef NO_SLANG
ifneq ($(feature-libslang), 1)
ifneq ($(feature-libslang-include-subdir), 1)
msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
NO_SLANG := 1
else
CFLAGS += -DHAVE_SLANG_INCLUDE_SUBDIR
endif
endif
ifndef NO_SLANG
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
CFLAGS += -DHAVE_SLANG_SUPPORT
EXTLIBS += -lslang
$(call detected,CONFIG_SLANG)
endif
endif
ifdef GTK2
FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
$(call feature_check,gtk2)
ifneq ($(feature-gtk2), 1)
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
NO_GTK2 := 1
else
$(call feature_check,gtk2-infobar)
ifeq ($(feature-gtk2-infobar), 1)
GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
endif
CFLAGS += -DHAVE_GTK2_SUPPORT
GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
EXTLIBS += -ldl
endif
endif
ifdef NO_LIBPERL
CFLAGS += -DNO_LIBPERL
else
PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null)
PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS))
PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(PERL_EMBED_CCOPTS))
PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS))
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
ifneq ($(feature-libperl), 1)
CFLAGS += -DNO_LIBPERL
NO_LIBPERL := 1
msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev);
else
LDFLAGS += $(PERL_EMBED_LDFLAGS)
EXTLIBS += $(PERL_EMBED_LIBADD)
CFLAGS += -DHAVE_LIBPERL_SUPPORT
ifeq ($(CC_NO_CLANG), 0)
CFLAGS += -Wno-compound-token-split-by-macro
endif
$(call detected,CONFIG_LIBPERL)
endif
endif
ifeq ($(feature-timerfd), 1)
CFLAGS += -DHAVE_TIMERFD_SUPPORT
else
msg := $(warning No timerfd support. Disables 'perf kvm stat live');
endif
disable-python = $(eval $(disable-python_code))
define disable-python_code
CFLAGS += -DNO_LIBPYTHON
$(warning $1)
NO_LIBPYTHON := 1
endef
ifdef NO_LIBPYTHON
$(call disable-python,Python support disabled by user)
else
ifndef PYTHON
$(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev)
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))
ifndef PYTHON_CONFIG
$(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev)
else
ifneq ($(feature-libpython), 1)
$(call disable-python,No 'Python.h' (for Python 2.x support) was found: disables Python support - please install python-devel/python-dev)
else
LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
EXTLIBS += $(PYTHON_EMBED_LIBADD)
LANG_BINDINGS += $(obj-perf)python/perf.so
CFLAGS += -DHAVE_LIBPYTHON_SUPPORT
$(call detected,CONFIG_LIBPYTHON)
endif
endif
endif
endif
ifneq ($(NO_JEVENTS),1)
ifeq ($(wildcard pmu-events/arch/$(SRCARCH)/mapfile.csv),)
NO_JEVENTS := 1
endif
endif
ifneq ($(NO_JEVENTS),1)
NO_JEVENTS := 0
ifndef PYTHON
$(warning No python interpreter disabling jevent generation)
NO_JEVENTS := 1
else
# jevents.py uses f-strings present in Python 3.6 released in Dec. 2016.
JEVENTS_PYTHON_GOOD := $(shell $(PYTHON) -c 'import sys;print("1" if(sys.version_info.major >= 3 and sys.version_info.minor >= 6) else "0")' 2> /dev/null)
ifneq ($(JEVENTS_PYTHON_GOOD), 1)
$(warning Python interpreter too old (older than 3.6) disabling jevent generation)
NO_JEVENTS := 1
endif
endif
endif
ifndef NO_LIBBFD
ifeq ($(feature-libbfd), 1)
EXTLIBS += -lbfd -lopcodes
else
# we are on a system that requires -liberty and (maybe) -lz
# to link against -lbfd; test each case individually here
# call all detections now so we get correct
# status in VF output
$(call feature_check,libbfd-liberty)
$(call feature_check,libbfd-liberty-z)
ifeq ($(feature-libbfd-liberty), 1)
EXTLIBS += -lbfd -lopcodes -liberty
else
ifeq ($(feature-libbfd-liberty-z), 1)
EXTLIBS += -lbfd -lopcodes -liberty -lz
endif
endif
$(call feature_check,disassembler-four-args)
$(call feature_check,disassembler-init-styled)
endif
ifeq ($(feature-libbfd-buildid), 1)
CFLAGS += -DHAVE_LIBBFD_BUILDID_SUPPORT
else
msg := $(warning Old version of libbfd/binutils things like PE executable profiling will not be available);
endif
endif
ifdef NO_DEMANGLE
CFLAGS += -DNO_DEMANGLE
else
ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
EXTLIBS += -liberty
else
ifeq ($(filter -liberty,$(EXTLIBS)),)
$(call feature_check,cplus-demangle)
# we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT
# or any of 'bfd iberty z' trinity
ifeq ($(feature-cplus-demangle), 1)
EXTLIBS += -liberty
else
msg := $(warning No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling)
CFLAGS += -DNO_DEMANGLE
endif
endif
endif
ifneq ($(filter -liberty,$(EXTLIBS)),)
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
endif
endif
ifneq ($(filter -lbfd,$(EXTLIBS)),)
CFLAGS += -DHAVE_LIBBFD_SUPPORT
endif
ifndef NO_ZLIB
ifeq ($(feature-zlib), 1)
CFLAGS += -DHAVE_ZLIB_SUPPORT
EXTLIBS += -lz
$(call detected,CONFIG_ZLIB)
else
NO_ZLIB := 1
endif
endif
ifndef NO_LZMA
ifeq ($(feature-lzma), 1)
CFLAGS += -DHAVE_LZMA_SUPPORT
EXTLIBS += -llzma
$(call detected,CONFIG_LZMA)
else
msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev);
NO_LZMA := 1
endif
endif
ifndef NO_LIBZSTD
ifeq ($(feature-libzstd), 1)
CFLAGS += -DHAVE_ZSTD_SUPPORT
CFLAGS += $(LIBZSTD_CFLAGS)
LDFLAGS += $(LIBZSTD_LDFLAGS)
EXTLIBS += -lzstd
$(call detected,CONFIG_ZSTD)
else
msg := $(warning No libzstd found, disables trace compression, please install libzstd-dev[el] and/or set LIBZSTD_DIR);
NO_LIBZSTD := 1
endif
endif
ifndef NO_LIBCAP
ifeq ($(feature-libcap), 1)
CFLAGS += -DHAVE_LIBCAP_SUPPORT
EXTLIBS += -lcap
$(call detected,CONFIG_LIBCAP)
else
msg := $(warning No libcap found, disables capability support, please install libcap-devel/libcap-dev);
NO_LIBCAP := 1
endif
endif
ifndef NO_BACKTRACE
ifeq ($(feature-backtrace), 1)
CFLAGS += -DHAVE_BACKTRACE_SUPPORT
endif
endif
ifndef NO_LIBNUMA
ifeq ($(feature-libnuma), 0)
msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
NO_LIBNUMA := 1
else
ifeq ($(feature-numa_num_possible_cpus), 0)
msg := $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8);
NO_LIBNUMA := 1
else
CFLAGS += -DHAVE_LIBNUMA_SUPPORT
EXTLIBS += -lnuma
$(call detected,CONFIG_NUMA)
endif
endif
endif
ifdef HAVE_KVM_STAT_SUPPORT
CFLAGS += -DHAVE_KVM_STAT_SUPPORT
endif
ifeq ($(feature-disassembler-four-args), 1)
CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
endif
ifeq ($(feature-disassembler-init-styled), 1)
CFLAGS += -DDISASM_INIT_STYLED
endif
ifeq (${IS_64_BIT}, 1)
ifndef NO_PERF_READ_VDSO32
$(call feature_check,compile-32)
ifeq ($(feature-compile-32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSO32
else
NO_PERF_READ_VDSO32 := 1
endif
endif
ifneq ($(SRCARCH), x86)
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_PERF_READ_VDSOX32
$(call feature_check,compile-x32)
ifeq ($(feature-compile-x32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSOX32
else
NO_PERF_READ_VDSOX32 := 1
endif
endif
else
NO_PERF_READ_VDSO32 := 1
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_LIBBABELTRACE
$(call feature_check,libbabeltrace)
ifeq ($(feature-libbabeltrace), 1)
CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
EXTLIBS += -lbabeltrace-ctf
$(call detected,CONFIG_LIBBABELTRACE)
else
msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev);
endif
endif
ifndef NO_AUXTRACE
ifeq ($(SRCARCH),x86)
ifeq ($(feature-get_cpuid), 0)
msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
NO_AUXTRACE := 1
endif
endif
ifndef NO_AUXTRACE
$(call detected,CONFIG_AUXTRACE)
CFLAGS += -DHAVE_AUXTRACE_SUPPORT
ifeq ($(feature-reallocarray), 0)
CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
endif
endif
endif
ifndef NO_JVMTI
ifneq (,$(wildcard /usr/sbin/update-java-alternatives))
JDIR=$(shell /usr/sbin/update-java-alternatives -l | head -1 | awk '{print $$3}')
else
ifneq (,$(wildcard /usr/sbin/alternatives))
JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed -e 's%/jre/bin/java.%%g' -e 's%/bin/java.%%g')
endif
endif
ifndef JDIR
$(warning No alternatives command found, you need to set JDIR= to point to the root of your Java directory)
NO_JVMTI := 1
endif
endif
ifndef NO_JVMTI
FEATURE_CHECK_CFLAGS-jvmti := -I$(JDIR)/include -I$(JDIR)/include/linux
$(call feature_check,jvmti)
ifeq ($(feature-jvmti), 1)
$(call detected_var,JDIR)
ifndef NO_JVMTI_CMLR
FEATURE_CHECK_CFLAGS-jvmti-cmlr := $(FEATURE_CHECK_CFLAGS-jvmti)
$(call feature_check,jvmti-cmlr)
ifeq ($(feature-jvmti-cmlr), 1)
CFLAGS += -DHAVE_JVMTI_CMLR
endif
endif # NO_JVMTI_CMLR
else
$(warning No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel)
NO_JVMTI := 1
endif
endif
USE_CXX = 0
USE_CLANGLLVM = 0
ifdef LIBCLANGLLVM
$(call feature_check,cxx)
ifneq ($(feature-cxx), 1)
msg := $(warning No g++ found, disable clang and llvm support. Please install g++)
else
$(call feature_check,llvm)
$(call feature_check,llvm-version)
ifneq ($(feature-llvm), 1)
msg := $(warning No suitable libLLVM found, disabling builtin clang and LLVM support. Please install llvm-dev(el) (>= 3.9.0))
else
$(call feature_check,clang)
ifneq ($(feature-clang), 1)
msg := $(warning No suitable libclang found, disabling builtin clang and LLVM support. Please install libclang-dev(el) (>= 3.9.0))
else
CFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT
CXXFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT -I$(shell $(LLVM_CONFIG) --includedir)
$(call detected,CONFIG_CXX)
$(call detected,CONFIG_CLANGLLVM)
USE_CXX = 1
USE_LLVM = 1
USE_CLANG = 1
ifneq ($(feature-llvm-version),1)
msg := $(warning This version of LLVM is not tested. May cause build errors)
endif
endif
endif
endif
endif
ifdef LIBPFM4
$(call feature_check,libpfm4)
ifeq ($(feature-libpfm4), 1)
CFLAGS += -DHAVE_LIBPFM
EXTLIBS += -lpfm
ASCIIDOC_EXTRA = -aHAVE_LIBPFM=1
$(call detected,CONFIG_LIBPFM4)
else
msg := $(warning libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev);
NO_LIBPFM4 := 1
endif
endif
ifdef LIBTRACEEVENT_DYNAMIC
$(call feature_check,libtraceevent)
ifeq ($(feature-libtraceevent), 1)
EXTLIBS += -ltraceevent
LIBTRACEEVENT_VERSION := $(shell $(PKG_CONFIG) --modversion libtraceevent)
LIBTRACEEVENT_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_CPP := $(shell expr $(LIBTRACEEVENT_VERSION_1) \* 255 \* 255 + $(LIBTRACEEVENT_VERSION_2) \* 255 + $(LIBTRACEEVENT_VERSION_3))
CFLAGS += -DLIBTRACEEVENT_VERSION=$(LIBTRACEEVENT_VERSION_CPP)
else
dummy := $(error Error: No libtraceevent devel library found, please install libtraceevent-devel);
endif
endif
ifdef LIBTRACEFS_DYNAMIC
$(call feature_check,libtracefs)
ifeq ($(feature-libtracefs), 1)
EXTLIBS += -ltracefs
LIBTRACEFS_VERSION := $(shell $(PKG_CONFIG) --modversion libtracefs)
LIBTRACEFS_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_CPP := $(shell expr $(LIBTRACEFS_VERSION_1) \* 255 \* 255 + $(LIBTRACEFS_VERSION_2) \* 255 + $(LIBTRACEFS_VERSION_3))
CFLAGS += -DLIBTRACEFS_VERSION=$(LIBTRACEFS_VERSION_CPP)
else
dummy := $(error Error: No libtracefs devel library found, please install libtracefs-dev);
endif
endif
# Among the variables below, these:
# perfexecdir
# perf_include_dir
# perf_examples_dir
# template_dir
# mandir
# infodir
# htmldir
# ETC_PERFCONFIG (but not sysconfdir)
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "perf" at
# runtime figures out where they are based on the path to the executable.
# This can help installing the suite in a relocatable way.
# Make the path relative to DESTDIR, not to prefix
ifndef DESTDIR
prefix ?= $(HOME)
endif
bindir_relative = bin
bindir = $(abspath $(prefix)/$(bindir_relative))
includedir_relative = include
includedir = $(abspath $(prefix)/$(includedir_relative))
mandir = share/man
infodir = share/info
perfexecdir = libexec/perf-core
perf_include_dir = lib/perf/include
perf_examples_dir = lib/perf/examples
sharedir = $(prefix)/share
template_dir = share/perf-core/templates
STRACE_GROUPS_DIR = share/perf-core/strace/groups
htmldir = share/doc/perf-doc
tipdir = share/doc/perf-tip
srcdir = $(srctree)/tools/perf
ifeq ($(prefix),/usr)
sysconfdir = /etc
ETC_PERFCONFIG = $(sysconfdir)/perfconfig
else
sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
ifndef lib
ifeq ($(SRCARCH)$(IS_64_BIT), x861)
lib = lib64
else
lib = lib
endif
endif # lib
libdir = $(prefix)/$(lib)
# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
STRACE_GROUPS_DIR_SQ = $(subst ','\'',$(STRACE_GROUPS_DIR))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
includedir_SQ = $(subst ','\'',$(includedir))
mandir_SQ = $(subst ','\'',$(mandir))
infodir_SQ = $(subst ','\'',$(infodir))
perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
perf_include_dir_SQ = $(subst ','\'',$(perf_include_dir))
perf_examples_dir_SQ = $(subst ','\'',$(perf_examples_dir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_SQ = $(subst ','\'',$(htmldir))
tipdir_SQ = $(subst ','\'',$(tipdir))
prefix_SQ = $(subst ','\'',$(prefix))
sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
libdir_SQ = $(subst ','\'',$(libdir))
srcdir_SQ = $(subst ','\'',$(srcdir))
ifneq ($(filter /%,$(firstword $(perfexecdir))),)
perfexec_instdir = $(perfexecdir)
perf_include_instdir = $(perf_include_dir)
perf_examples_instdir = $(perf_examples_dir)
STRACE_GROUPS_INSTDIR = $(STRACE_GROUPS_DIR)
tip_instdir = $(tipdir)
else
perfexec_instdir = $(prefix)/$(perfexecdir)
perf_include_instdir = $(prefix)/$(perf_include_dir)
perf_examples_instdir = $(prefix)/$(perf_examples_dir)
STRACE_GROUPS_INSTDIR = $(prefix)/$(STRACE_GROUPS_DIR)
tip_instdir = $(prefix)/$(tipdir)
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
perf_include_instdir_SQ = $(subst ','\'',$(perf_include_instdir))
perf_examples_instdir_SQ = $(subst ','\'',$(perf_examples_instdir))
STRACE_GROUPS_INSTDIR_SQ = $(subst ','\'',$(STRACE_GROUPS_INSTDIR))
tip_instdir_SQ = $(subst ','\'',$(tip_instdir))
# If we install to $(HOME) we keep the traceevent default:
# $(HOME)/.traceevent/plugins
# Otherwise we install plugins into the global $(libdir).
ifdef DESTDIR
plugindir=$(libdir)/traceevent/plugins
plugindir_SQ= $(subst ','\'',$(plugindir))
endif
print_var = $(eval $(print_var_code)) $(info $(MSG))
define print_var_code
MSG = $(shell printf '...%30s: %s' $(1) $($(1)))
endef
ifeq ($(VF),1)
# Display EXTRA features which are detected manualy
# from here with feature_check call and thus cannot
# be partof global state output.
$(foreach feat,$(FEATURE_TESTS_EXTRA),$(call feature_print_status,$(feat),))
$(call print_var,prefix)
$(call print_var,bindir)
$(call print_var,libdir)
$(call print_var,sysconfdir)
$(call print_var,LIBUNWIND_DIR)
$(call print_var,LIBDW_DIR)
$(call print_var,JDIR)
ifeq ($(dwarf-post-unwind),1)
$(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
endif
$(info )
endif
$(call detected_var,bindir_SQ)
$(call detected_var,PYTHON_WORD)
ifneq ($(OUTPUT),)
$(call detected_var,OUTPUT)
endif
$(call detected_var,htmldir_SQ)
$(call detected_var,infodir_SQ)
$(call detected_var,mandir_SQ)
$(call detected_var,ETC_PERFCONFIG_SQ)
$(call detected_var,STRACE_GROUPS_DIR_SQ)
$(call detected_var,prefix_SQ)
$(call detected_var,perfexecdir_SQ)
$(call detected_var,perf_include_dir_SQ)
$(call detected_var,perf_examples_dir_SQ)
$(call detected_var,tipdir_SQ)
$(call detected_var,srcdir_SQ)
$(call detected_var,LIBDIR)
$(call detected_var,GTK_CFLAGS)
$(call detected_var,PERL_EMBED_CCOPTS)
$(call detected_var,PYTHON_EMBED_CCOPTS)
ifneq ($(BISON_FILE_PREFIX_MAP),)
$(call detected_var,BISON_FILE_PREFIX_MAP)
endif
# re-generate FEATURE-DUMP as we may have called feature_check, found out
# extra libraries to add to LDFLAGS of some other test and then redo those
# tests.
$(shell rm -f $(FEATURE_DUMP_FILENAME))
$(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))
ifeq ($(feature_display),1)
$(call feature_display_entries)
endif