forked from Minki/linux
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
836 lines
20 KiB
C
836 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* HT16K33 driver
|
|
*
|
|
* Author: Robin van der Gracht <robin@protonic.nl>
|
|
*
|
|
* Copyright: (C) 2016 Protonic Holland.
|
|
* Copyright (C) 2021 Glider bv
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/property.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/map_to_7segment.h>
|
|
#include <linux/map_to_14segment.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "line-display.h"
|
|
|
|
/* Registers */
|
|
#define REG_SYSTEM_SETUP 0x20
|
|
#define REG_SYSTEM_SETUP_OSC_ON BIT(0)
|
|
|
|
#define REG_DISPLAY_SETUP 0x80
|
|
#define REG_DISPLAY_SETUP_ON BIT(0)
|
|
#define REG_DISPLAY_SETUP_BLINK_OFF (0 << 1)
|
|
#define REG_DISPLAY_SETUP_BLINK_2HZ (1 << 1)
|
|
#define REG_DISPLAY_SETUP_BLINK_1HZ (2 << 1)
|
|
#define REG_DISPLAY_SETUP_BLINK_0HZ5 (3 << 1)
|
|
|
|
#define REG_ROWINT_SET 0xA0
|
|
#define REG_ROWINT_SET_INT_EN BIT(0)
|
|
#define REG_ROWINT_SET_INT_ACT_HIGH BIT(1)
|
|
|
|
#define REG_BRIGHTNESS 0xE0
|
|
|
|
/* Defines */
|
|
#define DRIVER_NAME "ht16k33"
|
|
|
|
#define MIN_BRIGHTNESS 0x1
|
|
#define MAX_BRIGHTNESS 0x10
|
|
|
|
#define HT16K33_MATRIX_LED_MAX_COLS 8
|
|
#define HT16K33_MATRIX_LED_MAX_ROWS 16
|
|
#define HT16K33_MATRIX_KEYPAD_MAX_COLS 3
|
|
#define HT16K33_MATRIX_KEYPAD_MAX_ROWS 12
|
|
|
|
#define BYTES_PER_ROW (HT16K33_MATRIX_LED_MAX_ROWS / 8)
|
|
#define HT16K33_FB_SIZE (HT16K33_MATRIX_LED_MAX_COLS * BYTES_PER_ROW)
|
|
|
|
enum display_type {
|
|
DISP_MATRIX = 0,
|
|
DISP_QUAD_7SEG,
|
|
DISP_QUAD_14SEG,
|
|
};
|
|
|
|
struct ht16k33_keypad {
|
|
struct i2c_client *client;
|
|
struct input_dev *dev;
|
|
uint32_t cols;
|
|
uint32_t rows;
|
|
uint32_t row_shift;
|
|
uint32_t debounce_ms;
|
|
uint16_t last_key_state[HT16K33_MATRIX_KEYPAD_MAX_COLS];
|
|
|
|
wait_queue_head_t wait;
|
|
bool stopped;
|
|
};
|
|
|
|
struct ht16k33_fbdev {
|
|
struct fb_info *info;
|
|
uint32_t refresh_rate;
|
|
uint8_t *buffer;
|
|
uint8_t *cache;
|
|
};
|
|
|
|
struct ht16k33_seg {
|
|
struct linedisp linedisp;
|
|
union {
|
|
struct seg7_conversion_map seg7;
|
|
struct seg14_conversion_map seg14;
|
|
} map;
|
|
unsigned int map_size;
|
|
char curr[4];
|
|
};
|
|
|
|
struct ht16k33_priv {
|
|
struct i2c_client *client;
|
|
struct delayed_work work;
|
|
struct led_classdev led;
|
|
struct ht16k33_keypad keypad;
|
|
union {
|
|
struct ht16k33_fbdev fbdev;
|
|
struct ht16k33_seg seg;
|
|
};
|
|
enum display_type type;
|
|
uint8_t blink;
|
|
};
|
|
|
|
static const struct fb_fix_screeninfo ht16k33_fb_fix = {
|
|
.id = DRIVER_NAME,
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.visual = FB_VISUAL_MONO10,
|
|
.xpanstep = 0,
|
|
.ypanstep = 0,
|
|
.ywrapstep = 0,
|
|
.line_length = HT16K33_MATRIX_LED_MAX_ROWS,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
|
|
static const struct fb_var_screeninfo ht16k33_fb_var = {
|
|
.xres = HT16K33_MATRIX_LED_MAX_ROWS,
|
|
.yres = HT16K33_MATRIX_LED_MAX_COLS,
|
|
.xres_virtual = HT16K33_MATRIX_LED_MAX_ROWS,
|
|
.yres_virtual = HT16K33_MATRIX_LED_MAX_COLS,
|
|
.bits_per_pixel = 1,
|
|
.red = { 0, 1, 0 },
|
|
.green = { 0, 1, 0 },
|
|
.blue = { 0, 1, 0 },
|
|
.left_margin = 0,
|
|
.right_margin = 0,
|
|
.upper_margin = 0,
|
|
.lower_margin = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
};
|
|
|
|
static const SEG7_DEFAULT_MAP(initial_map_seg7);
|
|
static const SEG14_DEFAULT_MAP(initial_map_seg14);
|
|
|
|
static ssize_t map_seg_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct ht16k33_priv *priv = dev_get_drvdata(dev);
|
|
|
|
memcpy(buf, &priv->seg.map, priv->seg.map_size);
|
|
return priv->seg.map_size;
|
|
}
|
|
|
|
static ssize_t map_seg_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t cnt)
|
|
{
|
|
struct ht16k33_priv *priv = dev_get_drvdata(dev);
|
|
|
|
if (cnt != priv->seg.map_size)
|
|
return -EINVAL;
|
|
|
|
memcpy(&priv->seg.map, buf, cnt);
|
|
return cnt;
|
|
}
|
|
|
|
static DEVICE_ATTR(map_seg7, 0644, map_seg_show, map_seg_store);
|
|
static DEVICE_ATTR(map_seg14, 0644, map_seg_show, map_seg_store);
|
|
|
|
static int ht16k33_display_on(struct ht16k33_priv *priv)
|
|
{
|
|
uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON | priv->blink;
|
|
|
|
return i2c_smbus_write_byte(priv->client, data);
|
|
}
|
|
|
|
static int ht16k33_display_off(struct ht16k33_priv *priv)
|
|
{
|
|
return i2c_smbus_write_byte(priv->client, REG_DISPLAY_SETUP);
|
|
}
|
|
|
|
static int ht16k33_brightness_set(struct ht16k33_priv *priv,
|
|
unsigned int brightness)
|
|
{
|
|
int err;
|
|
|
|
if (brightness == 0) {
|
|
priv->blink = REG_DISPLAY_SETUP_BLINK_OFF;
|
|
return ht16k33_display_off(priv);
|
|
}
|
|
|
|
err = ht16k33_display_on(priv);
|
|
if (err)
|
|
return err;
|
|
|
|
return i2c_smbus_write_byte(priv->client,
|
|
REG_BRIGHTNESS | (brightness - 1));
|
|
}
|
|
|
|
static int ht16k33_brightness_set_blocking(struct led_classdev *led_cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv,
|
|
led);
|
|
|
|
return ht16k33_brightness_set(priv, brightness);
|
|
}
|
|
|
|
static int ht16k33_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on, unsigned long *delay_off)
|
|
{
|
|
struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv,
|
|
led);
|
|
unsigned int delay;
|
|
uint8_t blink;
|
|
int err;
|
|
|
|
if (!*delay_on && !*delay_off) {
|
|
blink = REG_DISPLAY_SETUP_BLINK_1HZ;
|
|
delay = 1000;
|
|
} else if (*delay_on <= 750) {
|
|
blink = REG_DISPLAY_SETUP_BLINK_2HZ;
|
|
delay = 500;
|
|
} else if (*delay_on <= 1500) {
|
|
blink = REG_DISPLAY_SETUP_BLINK_1HZ;
|
|
delay = 1000;
|
|
} else {
|
|
blink = REG_DISPLAY_SETUP_BLINK_0HZ5;
|
|
delay = 2000;
|
|
}
|
|
|
|
err = i2c_smbus_write_byte(priv->client,
|
|
REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON |
|
|
blink);
|
|
if (err)
|
|
return err;
|
|
|
|
priv->blink = blink;
|
|
*delay_on = *delay_off = delay;
|
|
return 0;
|
|
}
|
|
|
|
static void ht16k33_fb_queue(struct ht16k33_priv *priv)
|
|
{
|
|
struct ht16k33_fbdev *fbdev = &priv->fbdev;
|
|
|
|
schedule_delayed_work(&priv->work, HZ / fbdev->refresh_rate);
|
|
}
|
|
|
|
/*
|
|
* This gets the fb data from cache and copies it to ht16k33 display RAM
|
|
*/
|
|
static void ht16k33_fb_update(struct work_struct *work)
|
|
{
|
|
struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
|
|
work.work);
|
|
struct ht16k33_fbdev *fbdev = &priv->fbdev;
|
|
|
|
uint8_t *p1, *p2;
|
|
int len, pos = 0, first = -1;
|
|
|
|
p1 = fbdev->cache;
|
|
p2 = fbdev->buffer;
|
|
|
|
/* Search for the first byte with changes */
|
|
while (pos < HT16K33_FB_SIZE && first < 0) {
|
|
if (*(p1++) - *(p2++))
|
|
first = pos;
|
|
pos++;
|
|
}
|
|
|
|
/* No changes found */
|
|
if (first < 0)
|
|
goto requeue;
|
|
|
|
len = HT16K33_FB_SIZE - first;
|
|
p1 = fbdev->cache + HT16K33_FB_SIZE - 1;
|
|
p2 = fbdev->buffer + HT16K33_FB_SIZE - 1;
|
|
|
|
/* Determine i2c transfer length */
|
|
while (len > 1) {
|
|
if (*(p1--) - *(p2--))
|
|
break;
|
|
len--;
|
|
}
|
|
|
|
p1 = fbdev->cache + first;
|
|
p2 = fbdev->buffer + first;
|
|
if (!i2c_smbus_write_i2c_block_data(priv->client, first, len, p2))
|
|
memcpy(p1, p2, len);
|
|
requeue:
|
|
ht16k33_fb_queue(priv);
|
|
}
|
|
|
|
static int ht16k33_initialize(struct ht16k33_priv *priv)
|
|
{
|
|
uint8_t data[HT16K33_FB_SIZE];
|
|
uint8_t byte;
|
|
int err;
|
|
|
|
/* Clear RAM (8 * 16 bits) */
|
|
memset(data, 0, sizeof(data));
|
|
err = i2c_smbus_write_block_data(priv->client, 0, sizeof(data), data);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Turn on internal oscillator */
|
|
byte = REG_SYSTEM_SETUP_OSC_ON | REG_SYSTEM_SETUP;
|
|
err = i2c_smbus_write_byte(priv->client, byte);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Configure INT pin */
|
|
byte = REG_ROWINT_SET | REG_ROWINT_SET_INT_ACT_HIGH;
|
|
if (priv->client->irq > 0)
|
|
byte |= REG_ROWINT_SET_INT_EN;
|
|
return i2c_smbus_write_byte(priv->client, byte);
|
|
}
|
|
|
|
static int ht16k33_bl_update_status(struct backlight_device *bl)
|
|
{
|
|
int brightness = bl->props.brightness;
|
|
struct ht16k33_priv *priv = bl_get_data(bl);
|
|
|
|
if (bl->props.power != FB_BLANK_UNBLANK ||
|
|
bl->props.fb_blank != FB_BLANK_UNBLANK ||
|
|
bl->props.state & BL_CORE_FBBLANK)
|
|
brightness = 0;
|
|
|
|
return ht16k33_brightness_set(priv, brightness);
|
|
}
|
|
|
|
static int ht16k33_bl_check_fb(struct backlight_device *bl, struct fb_info *fi)
|
|
{
|
|
struct ht16k33_priv *priv = bl_get_data(bl);
|
|
|
|
return (fi == NULL) || (fi->par == priv);
|
|
}
|
|
|
|
static const struct backlight_ops ht16k33_bl_ops = {
|
|
.update_status = ht16k33_bl_update_status,
|
|
.check_fb = ht16k33_bl_check_fb,
|
|
};
|
|
|
|
/*
|
|
* Blank events will be passed to the actual device handling the backlight when
|
|
* we return zero here.
|
|
*/
|
|
static int ht16k33_blank(int blank, struct fb_info *info)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int ht16k33_mmap(struct fb_info *info, struct vm_area_struct *vma)
|
|
{
|
|
struct ht16k33_priv *priv = info->par;
|
|
struct page *pages = virt_to_page(priv->fbdev.buffer);
|
|
|
|
return vm_map_pages_zero(vma, &pages, 1);
|
|
}
|
|
|
|
static const struct fb_ops ht16k33_fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_read = fb_sys_read,
|
|
.fb_write = fb_sys_write,
|
|
.fb_blank = ht16k33_blank,
|
|
.fb_fillrect = sys_fillrect,
|
|
.fb_copyarea = sys_copyarea,
|
|
.fb_imageblit = sys_imageblit,
|
|
.fb_mmap = ht16k33_mmap,
|
|
};
|
|
|
|
/*
|
|
* This gets the keys from keypad and reports it to input subsystem.
|
|
* Returns true if a key is pressed.
|
|
*/
|
|
static bool ht16k33_keypad_scan(struct ht16k33_keypad *keypad)
|
|
{
|
|
const unsigned short *keycodes = keypad->dev->keycode;
|
|
u16 new_state[HT16K33_MATRIX_KEYPAD_MAX_COLS];
|
|
__le16 data[HT16K33_MATRIX_KEYPAD_MAX_COLS];
|
|
unsigned long bits_changed;
|
|
int row, col, code;
|
|
int rc;
|
|
bool pressed = false;
|
|
|
|
rc = i2c_smbus_read_i2c_block_data(keypad->client, 0x40,
|
|
sizeof(data), (u8 *)data);
|
|
if (rc != sizeof(data)) {
|
|
dev_err(&keypad->client->dev,
|
|
"Failed to read key data, rc=%d\n", rc);
|
|
return false;
|
|
}
|
|
|
|
for (col = 0; col < keypad->cols; col++) {
|
|
new_state[col] = le16_to_cpu(data[col]);
|
|
if (new_state[col])
|
|
pressed = true;
|
|
bits_changed = keypad->last_key_state[col] ^ new_state[col];
|
|
|
|
for_each_set_bit(row, &bits_changed, BITS_PER_LONG) {
|
|
code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
|
|
input_event(keypad->dev, EV_MSC, MSC_SCAN, code);
|
|
input_report_key(keypad->dev, keycodes[code],
|
|
new_state[col] & BIT(row));
|
|
}
|
|
}
|
|
input_sync(keypad->dev);
|
|
memcpy(keypad->last_key_state, new_state, sizeof(u16) * keypad->cols);
|
|
|
|
return pressed;
|
|
}
|
|
|
|
static irqreturn_t ht16k33_keypad_irq_thread(int irq, void *dev)
|
|
{
|
|
struct ht16k33_keypad *keypad = dev;
|
|
|
|
do {
|
|
wait_event_timeout(keypad->wait, keypad->stopped,
|
|
msecs_to_jiffies(keypad->debounce_ms));
|
|
if (keypad->stopped)
|
|
break;
|
|
} while (ht16k33_keypad_scan(keypad));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ht16k33_keypad_start(struct input_dev *dev)
|
|
{
|
|
struct ht16k33_keypad *keypad = input_get_drvdata(dev);
|
|
|
|
keypad->stopped = false;
|
|
mb();
|
|
enable_irq(keypad->client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ht16k33_keypad_stop(struct input_dev *dev)
|
|
{
|
|
struct ht16k33_keypad *keypad = input_get_drvdata(dev);
|
|
|
|
keypad->stopped = true;
|
|
mb();
|
|
wake_up(&keypad->wait);
|
|
disable_irq(keypad->client->irq);
|
|
}
|
|
|
|
static void ht16k33_linedisp_update(struct linedisp *linedisp)
|
|
{
|
|
struct ht16k33_priv *priv = container_of(linedisp, struct ht16k33_priv,
|
|
seg.linedisp);
|
|
|
|
schedule_delayed_work(&priv->work, 0);
|
|
}
|
|
|
|
static void ht16k33_seg7_update(struct work_struct *work)
|
|
{
|
|
struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
|
|
work.work);
|
|
struct ht16k33_seg *seg = &priv->seg;
|
|
char *s = seg->curr;
|
|
uint8_t buf[9];
|
|
|
|
buf[0] = map_to_seg7(&seg->map.seg7, *s++);
|
|
buf[1] = 0;
|
|
buf[2] = map_to_seg7(&seg->map.seg7, *s++);
|
|
buf[3] = 0;
|
|
buf[4] = 0;
|
|
buf[5] = 0;
|
|
buf[6] = map_to_seg7(&seg->map.seg7, *s++);
|
|
buf[7] = 0;
|
|
buf[8] = map_to_seg7(&seg->map.seg7, *s++);
|
|
|
|
i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
|
|
}
|
|
|
|
static void ht16k33_seg14_update(struct work_struct *work)
|
|
{
|
|
struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
|
|
work.work);
|
|
struct ht16k33_seg *seg = &priv->seg;
|
|
char *s = seg->curr;
|
|
uint8_t buf[8];
|
|
|
|
put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf);
|
|
put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 2);
|
|
put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 4);
|
|
put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 6);
|
|
|
|
i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
|
|
}
|
|
|
|
static int ht16k33_led_probe(struct device *dev, struct led_classdev *led,
|
|
unsigned int brightness)
|
|
{
|
|
struct led_init_data init_data = {};
|
|
int err;
|
|
|
|
/* The LED is optional */
|
|
init_data.fwnode = device_get_named_child_node(dev, "led");
|
|
if (!init_data.fwnode)
|
|
return 0;
|
|
|
|
init_data.devicename = "auxdisplay";
|
|
init_data.devname_mandatory = true;
|
|
|
|
led->brightness_set_blocking = ht16k33_brightness_set_blocking;
|
|
led->blink_set = ht16k33_blink_set;
|
|
led->flags = LED_CORE_SUSPENDRESUME;
|
|
led->brightness = brightness;
|
|
led->max_brightness = MAX_BRIGHTNESS;
|
|
|
|
err = devm_led_classdev_register_ext(dev, led, &init_data);
|
|
if (err)
|
|
dev_err(dev, "Failed to register LED\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ht16k33_keypad_probe(struct i2c_client *client,
|
|
struct ht16k33_keypad *keypad)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
u32 rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS;
|
|
u32 cols = HT16K33_MATRIX_KEYPAD_MAX_COLS;
|
|
int err;
|
|
|
|
keypad->client = client;
|
|
init_waitqueue_head(&keypad->wait);
|
|
|
|
keypad->dev = devm_input_allocate_device(dev);
|
|
if (!keypad->dev)
|
|
return -ENOMEM;
|
|
|
|
input_set_drvdata(keypad->dev, keypad);
|
|
|
|
keypad->dev->name = DRIVER_NAME"-keypad";
|
|
keypad->dev->id.bustype = BUS_I2C;
|
|
keypad->dev->open = ht16k33_keypad_start;
|
|
keypad->dev->close = ht16k33_keypad_stop;
|
|
|
|
if (!device_property_read_bool(dev, "linux,no-autorepeat"))
|
|
__set_bit(EV_REP, keypad->dev->evbit);
|
|
|
|
err = device_property_read_u32(dev, "debounce-delay-ms",
|
|
&keypad->debounce_ms);
|
|
if (err) {
|
|
dev_err(dev, "key debounce delay not specified\n");
|
|
return err;
|
|
}
|
|
|
|
err = matrix_keypad_parse_properties(dev, &rows, &cols);
|
|
if (err)
|
|
return err;
|
|
if (rows > HT16K33_MATRIX_KEYPAD_MAX_ROWS ||
|
|
cols > HT16K33_MATRIX_KEYPAD_MAX_COLS) {
|
|
dev_err(dev, "%u rows or %u cols out of range in DT\n", rows,
|
|
cols);
|
|
return -ERANGE;
|
|
}
|
|
|
|
keypad->rows = rows;
|
|
keypad->cols = cols;
|
|
keypad->row_shift = get_count_order(cols);
|
|
|
|
err = matrix_keypad_build_keymap(NULL, NULL, rows, cols, NULL,
|
|
keypad->dev);
|
|
if (err) {
|
|
dev_err(dev, "failed to build keymap\n");
|
|
return err;
|
|
}
|
|
|
|
err = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
ht16k33_keypad_irq_thread,
|
|
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
|
|
DRIVER_NAME, keypad);
|
|
if (err) {
|
|
dev_err(dev, "irq request failed %d, error %d\n", client->irq,
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
ht16k33_keypad_stop(keypad->dev);
|
|
|
|
return input_register_device(keypad->dev);
|
|
}
|
|
|
|
static int ht16k33_fbdev_probe(struct device *dev, struct ht16k33_priv *priv,
|
|
uint32_t brightness)
|
|
{
|
|
struct ht16k33_fbdev *fbdev = &priv->fbdev;
|
|
struct backlight_device *bl = NULL;
|
|
int err;
|
|
|
|
if (priv->led.dev) {
|
|
err = ht16k33_brightness_set(priv, brightness);
|
|
if (err)
|
|
return err;
|
|
} else {
|
|
/* backwards compatibility with DT lacking an led subnode */
|
|
struct backlight_properties bl_props;
|
|
|
|
memset(&bl_props, 0, sizeof(struct backlight_properties));
|
|
bl_props.type = BACKLIGHT_RAW;
|
|
bl_props.max_brightness = MAX_BRIGHTNESS;
|
|
|
|
bl = devm_backlight_device_register(dev, DRIVER_NAME"-bl", dev,
|
|
priv, &ht16k33_bl_ops,
|
|
&bl_props);
|
|
if (IS_ERR(bl)) {
|
|
dev_err(dev, "failed to register backlight\n");
|
|
return PTR_ERR(bl);
|
|
}
|
|
|
|
bl->props.brightness = brightness;
|
|
ht16k33_bl_update_status(bl);
|
|
}
|
|
|
|
/* Framebuffer (2 bytes per column) */
|
|
BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE);
|
|
fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL);
|
|
if (!fbdev->buffer)
|
|
return -ENOMEM;
|
|
|
|
fbdev->cache = devm_kmalloc(dev, HT16K33_FB_SIZE, GFP_KERNEL);
|
|
if (!fbdev->cache) {
|
|
err = -ENOMEM;
|
|
goto err_fbdev_buffer;
|
|
}
|
|
|
|
fbdev->info = framebuffer_alloc(0, dev);
|
|
if (!fbdev->info) {
|
|
err = -ENOMEM;
|
|
goto err_fbdev_buffer;
|
|
}
|
|
|
|
err = device_property_read_u32(dev, "refresh-rate-hz",
|
|
&fbdev->refresh_rate);
|
|
if (err) {
|
|
dev_err(dev, "refresh rate not specified\n");
|
|
goto err_fbdev_info;
|
|
}
|
|
fb_bl_default_curve(fbdev->info, 0, MIN_BRIGHTNESS, MAX_BRIGHTNESS);
|
|
|
|
INIT_DELAYED_WORK(&priv->work, ht16k33_fb_update);
|
|
fbdev->info->fbops = &ht16k33_fb_ops;
|
|
fbdev->info->screen_base = (char __iomem *) fbdev->buffer;
|
|
fbdev->info->screen_size = HT16K33_FB_SIZE;
|
|
fbdev->info->fix = ht16k33_fb_fix;
|
|
fbdev->info->var = ht16k33_fb_var;
|
|
fbdev->info->bl_dev = bl;
|
|
fbdev->info->pseudo_palette = NULL;
|
|
fbdev->info->flags = FBINFO_FLAG_DEFAULT;
|
|
fbdev->info->par = priv;
|
|
|
|
err = register_framebuffer(fbdev->info);
|
|
if (err)
|
|
goto err_fbdev_info;
|
|
|
|
ht16k33_fb_queue(priv);
|
|
return 0;
|
|
|
|
err_fbdev_info:
|
|
framebuffer_release(fbdev->info);
|
|
err_fbdev_buffer:
|
|
free_page((unsigned long) fbdev->buffer);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ht16k33_seg_probe(struct device *dev, struct ht16k33_priv *priv,
|
|
uint32_t brightness)
|
|
{
|
|
struct ht16k33_seg *seg = &priv->seg;
|
|
int err;
|
|
|
|
err = ht16k33_brightness_set(priv, brightness);
|
|
if (err)
|
|
return err;
|
|
|
|
switch (priv->type) {
|
|
case DISP_MATRIX:
|
|
/* not handled here */
|
|
err = -EINVAL;
|
|
break;
|
|
|
|
case DISP_QUAD_7SEG:
|
|
INIT_DELAYED_WORK(&priv->work, ht16k33_seg7_update);
|
|
seg->map.seg7 = initial_map_seg7;
|
|
seg->map_size = sizeof(seg->map.seg7);
|
|
err = device_create_file(dev, &dev_attr_map_seg7);
|
|
break;
|
|
|
|
case DISP_QUAD_14SEG:
|
|
INIT_DELAYED_WORK(&priv->work, ht16k33_seg14_update);
|
|
seg->map.seg14 = initial_map_seg14;
|
|
seg->map_size = sizeof(seg->map.seg14);
|
|
err = device_create_file(dev, &dev_attr_map_seg14);
|
|
break;
|
|
}
|
|
if (err)
|
|
return err;
|
|
|
|
err = linedisp_register(&seg->linedisp, dev, 4, seg->curr,
|
|
ht16k33_linedisp_update);
|
|
if (err)
|
|
goto err_remove_map_file;
|
|
|
|
return 0;
|
|
|
|
err_remove_map_file:
|
|
device_remove_file(dev, &dev_attr_map_seg7);
|
|
device_remove_file(dev, &dev_attr_map_seg14);
|
|
return err;
|
|
}
|
|
|
|
static int ht16k33_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
const struct of_device_id *id;
|
|
struct ht16k33_priv *priv;
|
|
uint32_t dft_brightness;
|
|
int err;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(dev, "i2c_check_functionality error\n");
|
|
return -EIO;
|
|
}
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->client = client;
|
|
id = i2c_of_match_device(dev->driver->of_match_table, client);
|
|
if (id)
|
|
priv->type = (uintptr_t)id->data;
|
|
i2c_set_clientdata(client, priv);
|
|
|
|
err = ht16k33_initialize(priv);
|
|
if (err)
|
|
return err;
|
|
|
|
err = device_property_read_u32(dev, "default-brightness-level",
|
|
&dft_brightness);
|
|
if (err) {
|
|
dft_brightness = MAX_BRIGHTNESS;
|
|
} else if (dft_brightness > MAX_BRIGHTNESS) {
|
|
dev_warn(dev,
|
|
"invalid default brightness level: %u, using %u\n",
|
|
dft_brightness, MAX_BRIGHTNESS);
|
|
dft_brightness = MAX_BRIGHTNESS;
|
|
}
|
|
|
|
/* LED */
|
|
err = ht16k33_led_probe(dev, &priv->led, dft_brightness);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Keypad */
|
|
if (client->irq > 0) {
|
|
err = ht16k33_keypad_probe(client, &priv->keypad);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
switch (priv->type) {
|
|
case DISP_MATRIX:
|
|
/* Frame Buffer Display */
|
|
err = ht16k33_fbdev_probe(dev, priv, dft_brightness);
|
|
break;
|
|
|
|
case DISP_QUAD_7SEG:
|
|
case DISP_QUAD_14SEG:
|
|
/* Segment Display */
|
|
err = ht16k33_seg_probe(dev, priv, dft_brightness);
|
|
break;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void ht16k33_remove(struct i2c_client *client)
|
|
{
|
|
struct ht16k33_priv *priv = i2c_get_clientdata(client);
|
|
struct ht16k33_fbdev *fbdev = &priv->fbdev;
|
|
|
|
cancel_delayed_work_sync(&priv->work);
|
|
|
|
switch (priv->type) {
|
|
case DISP_MATRIX:
|
|
unregister_framebuffer(fbdev->info);
|
|
framebuffer_release(fbdev->info);
|
|
free_page((unsigned long)fbdev->buffer);
|
|
break;
|
|
|
|
case DISP_QUAD_7SEG:
|
|
case DISP_QUAD_14SEG:
|
|
linedisp_unregister(&priv->seg.linedisp);
|
|
device_remove_file(&client->dev, &dev_attr_map_seg7);
|
|
device_remove_file(&client->dev, &dev_attr_map_seg14);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const struct i2c_device_id ht16k33_i2c_match[] = {
|
|
{ "ht16k33", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ht16k33_i2c_match);
|
|
|
|
static const struct of_device_id ht16k33_of_match[] = {
|
|
{
|
|
/* 0.56" 4-Digit 7-Segment FeatherWing Display (Red) */
|
|
.compatible = "adafruit,3108", .data = (void *)DISP_QUAD_7SEG,
|
|
}, {
|
|
/* 0.54" Quad Alphanumeric FeatherWing Display (Red) */
|
|
.compatible = "adafruit,3130", .data = (void *)DISP_QUAD_14SEG,
|
|
}, {
|
|
/* Generic, assumed Dot-Matrix Display */
|
|
.compatible = "holtek,ht16k33", .data = (void *)DISP_MATRIX,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ht16k33_of_match);
|
|
|
|
static struct i2c_driver ht16k33_driver = {
|
|
.probe_new = ht16k33_probe,
|
|
.remove = ht16k33_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = ht16k33_of_match,
|
|
},
|
|
.id_table = ht16k33_i2c_match,
|
|
};
|
|
module_i2c_driver(ht16k33_driver);
|
|
|
|
MODULE_DESCRIPTION("Holtek HT16K33 driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Robin van der Gracht <robin@protonic.nl>");
|