forked from Minki/linux
4d54a25ba5
According to the databook, 10.2us is the max time for dll to be ready to work. However in testing, some chips need 20us for dll to be ready. This patch adds some extra margin for dllrdy to be ready, fixing our -ETIMEDOUT issues. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
234 lines
6.2 KiB
C
234 lines
6.2 KiB
C
/*
|
|
* Rockchip emmc PHY driver
|
|
*
|
|
* Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
|
|
* Copyright (C) 2016 ROCKCHIP, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/*
|
|
* The higher 16-bit of this register is used for write protection
|
|
* only if BIT(x + 16) set to 1 the BIT(x) can be written.
|
|
*/
|
|
#define HIWORD_UPDATE(val, mask, shift) \
|
|
((val) << (shift) | (mask) << ((shift) + 16))
|
|
|
|
/* Register definition */
|
|
#define GRF_EMMCPHY_CON0 0x0
|
|
#define GRF_EMMCPHY_CON1 0x4
|
|
#define GRF_EMMCPHY_CON2 0x8
|
|
#define GRF_EMMCPHY_CON3 0xc
|
|
#define GRF_EMMCPHY_CON4 0x10
|
|
#define GRF_EMMCPHY_CON5 0x14
|
|
#define GRF_EMMCPHY_CON6 0x18
|
|
#define GRF_EMMCPHY_STATUS 0x20
|
|
|
|
#define PHYCTRL_PDB_MASK 0x1
|
|
#define PHYCTRL_PDB_SHIFT 0x0
|
|
#define PHYCTRL_PDB_PWR_ON 0x1
|
|
#define PHYCTRL_PDB_PWR_OFF 0x0
|
|
#define PHYCTRL_ENDLL_MASK 0x1
|
|
#define PHYCTRL_ENDLL_SHIFT 0x1
|
|
#define PHYCTRL_ENDLL_ENABLE 0x1
|
|
#define PHYCTRL_ENDLL_DISABLE 0x0
|
|
#define PHYCTRL_CALDONE_MASK 0x1
|
|
#define PHYCTRL_CALDONE_SHIFT 0x6
|
|
#define PHYCTRL_CALDONE_DONE 0x1
|
|
#define PHYCTRL_CALDONE_GOING 0x0
|
|
#define PHYCTRL_DLLRDY_MASK 0x1
|
|
#define PHYCTRL_DLLRDY_SHIFT 0x5
|
|
#define PHYCTRL_DLLRDY_DONE 0x1
|
|
#define PHYCTRL_DLLRDY_GOING 0x0
|
|
|
|
struct rockchip_emmc_phy {
|
|
unsigned int reg_offset;
|
|
struct regmap *reg_base;
|
|
};
|
|
|
|
static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy,
|
|
bool on_off)
|
|
{
|
|
unsigned int caldone;
|
|
unsigned int dllrdy;
|
|
|
|
/*
|
|
* Keep phyctrl_pdb and phyctrl_endll low to allow
|
|
* initialization of CALIO state M/C DFFs
|
|
*/
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF,
|
|
PHYCTRL_PDB_MASK,
|
|
PHYCTRL_PDB_SHIFT));
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE,
|
|
PHYCTRL_ENDLL_MASK,
|
|
PHYCTRL_ENDLL_SHIFT));
|
|
|
|
/* Already finish power_off above */
|
|
if (on_off == PHYCTRL_PDB_PWR_OFF)
|
|
return 0;
|
|
|
|
/*
|
|
* According to the user manual, calpad calibration
|
|
* cycle takes more than 2us without the minimal recommended
|
|
* value, so we may need a little margin here
|
|
*/
|
|
udelay(3);
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON,
|
|
PHYCTRL_PDB_MASK,
|
|
PHYCTRL_PDB_SHIFT));
|
|
|
|
/*
|
|
* According to the user manual, it asks driver to
|
|
* wait 5us for calpad busy trimming
|
|
*/
|
|
udelay(5);
|
|
regmap_read(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
|
|
&caldone);
|
|
caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
|
|
if (caldone != PHYCTRL_CALDONE_DONE) {
|
|
pr_err("rockchip_emmc_phy_power: caldone timeout.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE,
|
|
PHYCTRL_ENDLL_MASK,
|
|
PHYCTRL_ENDLL_SHIFT));
|
|
/*
|
|
* After enable analog DLL circuits, we need an extra 10.2us
|
|
* for dll to be ready for work. But according to testing, we
|
|
* find some chips need more than 25us.
|
|
*/
|
|
udelay(30);
|
|
regmap_read(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
|
|
&dllrdy);
|
|
dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK;
|
|
if (dllrdy != PHYCTRL_DLLRDY_DONE) {
|
|
pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_emmc_phy_power_off(struct phy *phy)
|
|
{
|
|
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
|
|
int ret = 0;
|
|
|
|
/* Power down emmc phy analog blocks */
|
|
ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_emmc_phy_power_on(struct phy *phy)
|
|
{
|
|
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
|
|
int ret = 0;
|
|
|
|
/* Power up emmc phy analog blocks */
|
|
ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops ops = {
|
|
.power_on = rockchip_emmc_phy_power_on,
|
|
.power_off = rockchip_emmc_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int rockchip_emmc_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct rockchip_emmc_phy *rk_phy;
|
|
struct phy *generic_phy;
|
|
struct phy_provider *phy_provider;
|
|
struct regmap *grf;
|
|
unsigned int reg_offset;
|
|
|
|
if (!dev->parent || !dev->parent->of_node)
|
|
return -ENODEV;
|
|
|
|
grf = syscon_node_to_regmap(dev->parent->of_node);
|
|
if (IS_ERR(grf)) {
|
|
dev_err(dev, "Missing rockchip,grf property\n");
|
|
return PTR_ERR(grf);
|
|
}
|
|
|
|
rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
|
|
if (!rk_phy)
|
|
return -ENOMEM;
|
|
|
|
if (of_property_read_u32(dev->of_node, "reg", ®_offset)) {
|
|
dev_err(dev, "missing reg property in node %s\n",
|
|
dev->of_node->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rk_phy->reg_offset = reg_offset;
|
|
rk_phy->reg_base = grf;
|
|
|
|
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
|
|
if (IS_ERR(generic_phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(generic_phy);
|
|
}
|
|
|
|
phy_set_drvdata(generic_phy, rk_phy);
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id rockchip_emmc_phy_dt_ids[] = {
|
|
{ .compatible = "rockchip,rk3399-emmc-phy" },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids);
|
|
|
|
static struct platform_driver rockchip_emmc_driver = {
|
|
.probe = rockchip_emmc_phy_probe,
|
|
.driver = {
|
|
.name = "rockchip-emmc-phy",
|
|
.of_match_table = rockchip_emmc_phy_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(rockchip_emmc_driver);
|
|
|
|
MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
|
|
MODULE_DESCRIPTION("Rockchip EMMC PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|