leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4d3995b14b
linux/drivers/serial/sh-sci.c
Paul Mundt 96de1a8f02 serial: Move asm-sh/sci.h to linux/serial_sci.h. 
This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.

This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:52:45 +09:00

1555 lines
36 KiB
C
Raw Blame History

/*
* drivers/serial/sh-sci.c
*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
* Copyright (C) 2002 - 2006 Paul Mundt
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
*
* based off of the old drivers/char/sh-sci.c by:
*
* Copyright (C) 1999, 2000 Niibe Yutaka
* Copyright (C) 2000 Sugioka Toshinobu
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SecureEdge. David McCullough (2002)
* Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
* Removed SH7300 support (Jul 2007).
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#undef DEBUG
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/sysrq.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/serial_sci.h>
#ifdef CONFIG_CPU_FREQ
#include <linux/notifier.h>
#include <linux/cpufreq.h>
#endif
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
#include <linux/ctype.h>
#include <asm/clock.h>
#include <asm/sh_bios.h>
#include <asm/kgdb.h>
#endif
#include "sh-sci.h"
struct sci_port {
struct uart_port port;
/* Port type */
unsigned int type;
/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
unsigned int irqs[SCIx_NR_IRQS];
/* Port pin configuration */
void (*init_pins)(struct uart_port *port,
unsigned int cflag);
/* Port enable callback */
void (*enable)(struct uart_port *port);
/* Port disable callback */
void (*disable)(struct uart_port *port);
/* Break timer */
struct timer_list break_timer;
int break_flag;
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
/* Port clock */
struct clk *clk;
#endif
};
#ifdef CONFIG_SH_KGDB
static struct sci_port *kgdb_sci_port;
#endif
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static struct sci_port *serial_console_port;
#endif
/* Function prototypes */
static void sci_stop_tx(struct uart_port *port);
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
static struct sci_port sci_ports[SCI_NPORTS];
static struct uart_driver sci_uart_driver;
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
static inline void handle_error(struct uart_port *port)
{
/* Clear error flags */
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
}
static int get_char(struct uart_port *port)
{
unsigned long flags;
unsigned short status;
int c;
spin_lock_irqsave(&port->lock, flags);
do {
status = sci_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
handle_error(port);
continue;
}
} while (!(status & SCxSR_RDxF(port)));
c = sci_in(port, SCxRDR);
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
spin_unlock_irqrestore(&port->lock, flags);
return c;
}
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
static void put_char(struct uart_port *port, char c)
{
unsigned long flags;
unsigned short status;
spin_lock_irqsave(&port->lock, flags);
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
sci_out(port, SCxTDR, c);
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
spin_unlock_irqrestore(&port->lock, flags);
}
#endif
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static void put_string(struct sci_port *sci_port, const char *buffer, int count)
{
struct uart_port *port = &sci_port->port;
const unsigned char *p = buffer;
int i;
#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
int checksum;
int usegdb=0;
#ifdef CONFIG_SH_STANDARD_BIOS
/* This call only does a trap the first time it is
* called, and so is safe to do here unconditionally
*/
usegdb |= sh_bios_in_gdb_mode();
#endif
#ifdef CONFIG_SH_KGDB
usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
#endif
if (usegdb) {
/* $<packet info>#<checksum>. */
do {
unsigned char c;
put_char(port, '$');
put_char(port, 'O'); /* 'O'utput to console */
checksum = 'O';
for (i=0; i<count; i++) { /* Don't use run length encoding */
int h, l;
c = *p++;
h = highhex(c);
l = lowhex(c);
put_char(port, h);
put_char(port, l);
checksum += h + l;
}
put_char(port, '#');
put_char(port, highhex(checksum));
put_char(port, lowhex(checksum));
} while (get_char(port) != '+');
} else
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
for (i=0; i<count; i++) {
if (*p == 10)
put_char(port, '\r');
put_char(port, *p++);
}
}
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
#ifdef CONFIG_SH_KGDB
static int kgdb_sci_getchar(void)
{
int c;
/* Keep trying to read a character, this could be neater */
while ((c = get_char(&kgdb_sci_port->port)) < 0)
cpu_relax();
return c;
}
static inline void kgdb_sci_putchar(int c)
{
put_char(&kgdb_sci_port->port, c);
}
#endif /* CONFIG_SH_KGDB */
#if defined(__H8300S__)
enum { sci_disable, sci_enable };
static void h8300_sci_config(struct uart_port* port, unsigned int ctrl)
{
volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
int ch = (port->mapbase - SMR0) >> 3;
unsigned char mask = 1 << (ch+1);
if (ctrl == sci_disable) {
*mstpcrl |= mask;
} else {
*mstpcrl &= ~mask;
}
}
static inline void h8300_sci_enable(struct uart_port *port)
{
h8300_sci_config(port, sci_enable);
}
static inline void h8300_sci_disable(struct uart_port *port)
{
h8300_sci_config(port, sci_disable);
}
#endif
#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \
defined(__H8300H__) || defined(__H8300S__)
static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
{
int ch = (port->mapbase - SMR0) >> 3;
/* set DDR regs */
H8300_GPIO_DDR(h8300_sci_pins[ch].port,
h8300_sci_pins[ch].rx,
H8300_GPIO_INPUT);
H8300_GPIO_DDR(h8300_sci_pins[ch].port,
h8300_sci_pins[ch].tx,
H8300_GPIO_OUTPUT);
/* tx mark output*/
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
}
#else
#define sci_init_pins_sci NULL
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
if (cflag & CRTSCTS)
fcr_val |= SCFCR_MCE;
sci_out(port, SCFCR, fcr_val);
}
#else
#define sci_init_pins_irda NULL
#endif
#ifdef SCI_ONLY
#define sci_init_pins_scif NULL
#endif
#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
{
unsigned int fcr_val = 0;
set_sh771x_scif_pfc(port);
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
}
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
unsigned short data;
if (cflag & CRTSCTS) {
/* enable RTS/CTS */
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 9-2; enable all scif pins but sck */
data = ctrl_inw(PORT_PTCR);
ctrl_outw((data & 0xfc03), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 9-2 */
data = ctrl_inw(PORT_PVCR);
ctrl_outw((data & 0xfc03), PORT_PVCR);
}
fcr_val |= SCFCR_MCE;
} else {
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 5-2; enable only tx and rx */
data = ctrl_inw(PORT_PTCR);
ctrl_outw((data & 0xffc3), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 5-2 */
data = ctrl_inw(PORT_PVCR);
ctrl_outw((data & 0xffc3), PORT_PVCR);
}
}
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
unsigned short data;
/* We need to set SCPCR to enable RTS/CTS */
data = ctrl_inw(SCPCR);
/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
ctrl_outw(data & 0x0fcf, SCPCR);
if (cflag & CRTSCTS)
fcr_val |= SCFCR_MCE;
else {
/* We need to set SCPCR to enable RTS/CTS */
data = ctrl_inw(SCPCR);
/* Clear out SCP7MD1,0, SCP4MD1,0,
Set SCP6MD1,0 = {01} (output) */
ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
data = ctrl_inb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
ctrl_outb(data & 0xbf, SCPDR);
}
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
ctrl_outw(0x0000, PORT_PSCR);
} else {
unsigned short data;
data = ctrl_inw(PORT_PSCR);
data &= 0x033f;
data |= 0x0400;
ctrl_outw(data, PORT_PSCR);
ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0);
}
sci_out(port, SCFCR, fcr_val);
}
#else
/* For SH7750 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
} else {
#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
/* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
#endif
}
sci_out(port, SCFCR, fcr_val);
}
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
static inline int scif_txroom(struct uart_port *port)
{
return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
}
static inline int scif_rxroom(struct uart_port *port)
{
return sci_in(port, SCRFDR) & 0x7f;
}
#else
static inline int scif_txroom(struct uart_port *port)
{
return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
}
static inline int scif_rxroom(struct uart_port *port)
{
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
#endif /* SCIF_ONLY || SCI_AND_SCIF */
static inline int sci_txroom(struct uart_port *port)
{
return ((sci_in(port, SCxSR) & SCI_TDRE) != 0);
}
static inline int sci_rxroom(struct uart_port *port)
{
return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0);
}
/* ********************************************************************** *
* the interrupt related routines *
* ********************************************************************** */
static void sci_transmit_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->info->xmit;
unsigned int stopped = uart_tx_stopped(port);
unsigned short status;
unsigned short ctrl;
int count;
status = sci_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
ctrl = sci_in(port, SCSCR);
if (uart_circ_empty(xmit)) {
ctrl &= ~SCI_CTRL_FLAGS_TIE;
} else {
ctrl |= SCI_CTRL_FLAGS_TIE;
}
sci_out(port, SCSCR, ctrl);
return;
}
#ifndef SCI_ONLY
if (port->type == PORT_SCIF)
count = scif_txroom(port);
else
#endif
count = sci_txroom(port);
do {
unsigned char c;
if (port->x_char) {
c = port->x_char;
port->x_char = 0;
} else if (!uart_circ_empty(xmit) && !stopped) {
c = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
} else {
break;
}
sci_out(port, SCxTDR, c);
port->icount.tx++;
} while (--count > 0);
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit)) {
sci_stop_tx(port);
} else {
ctrl = sci_in(port, SCSCR);
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF) {
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
}
#endif
ctrl |= SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
}
}
/* On SH3, SCIF may read end-of-break as a space->mark char */
#define STEPFN(c) ({int __c=(c); (((__c-1)|(__c)) == -1); })
static inline void sci_receive_chars(struct uart_port *port)
{
struct sci_port *sci_port = (struct sci_port *)port;
struct tty_struct *tty = port->info->tty;
int i, count, copied = 0;
unsigned short status;
unsigned char flag;
status = sci_in(port, SCxSR);
if (!(status & SCxSR_RDxF(port)))
return;
while (1) {
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF)
count = scif_rxroom(port);
else
#endif
count = sci_rxroom(port);
/* Don't copy more bytes than there is room for in the buffer */
count = tty_buffer_request_room(tty, count);
/* If for any reason we can't copy more data, we're done! */
if (count == 0)
break;
if (port->type == PORT_SCI) {
char c = sci_in(port, SCxRDR);
if (uart_handle_sysrq_char(port, c) || sci_port->break_flag)
count = 0;
else {
tty_insert_flip_char(tty, c, TTY_NORMAL);
}
} else {
for (i=0; i<count; i++) {
char c = sci_in(port, SCxRDR);
status = sci_in(port, SCxSR);
#if defined(CONFIG_CPU_SH3)
/* Skip "chars" during break */
if (sci_port->break_flag) {
if ((c == 0) &&
(status & SCxSR_FER(port))) {
count--; i--;
continue;
}
/* Nonzero => end-of-break */
pr_debug("scif: debounce<%02x>\n", c);
sci_port->break_flag = 0;
if (STEPFN(c)) {
count--; i--;
continue;
}
}
#endif /* CONFIG_CPU_SH3 */
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
continue;
}
/* Store data and status */
if (status&SCxSR_FER(port)) {
flag = TTY_FRAME;
pr_debug("sci: frame error\n");
} else if (status&SCxSR_PER(port)) {
flag = TTY_PARITY;
pr_debug("sci: parity error\n");
} else
flag = TTY_NORMAL;
tty_insert_flip_char(tty, c, flag);
}
}
sci_in(port, SCxSR); /* dummy read */
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
copied += count;
port->icount.rx += count;
}
if (copied) {
/* Tell the rest of the system the news. New characters! */
tty_flip_buffer_push(tty);
} else {
sci_in(port, SCxSR); /* dummy read */
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
}
#define SCI_BREAK_JIFFIES (HZ/20)
/* The sci generates interrupts during the break,
* 1 per millisecond or so during the break period, for 9600 baud.
* So dont bother disabling interrupts.
* But dont want more than 1 break event.
* Use a kernel timer to periodically poll the rx line until
* the break is finished.
*/
static void sci_schedule_break_timer(struct sci_port *port)
{
port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES;
add_timer(&port->break_timer);
}
/* Ensure that two consecutive samples find the break over. */
static void sci_break_timer(unsigned long data)
{
struct sci_port *port = (struct sci_port *)data;
if (sci_rxd_in(&port->port) == 0) {
port->break_flag = 1;
sci_schedule_break_timer(port);
} else if (port->break_flag == 1) {
/* break is over. */
port->break_flag = 2;
sci_schedule_break_timer(port);
} else
port->break_flag = 0;
}
static inline int sci_handle_errors(struct uart_port *port)
{
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
struct tty_struct *tty = port->info->tty;
if (status & SCxSR_ORER(port)) {
/* overrun error */
if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
copied++;
pr_debug("sci: overrun error\n");
}
if (status & SCxSR_FER(port)) {
if (sci_rxd_in(port) == 0) {
/* Notify of BREAK */
struct sci_port *sci_port = (struct sci_port *)port;
if (!sci_port->break_flag) {
sci_port->break_flag = 1;
sci_schedule_break_timer(sci_port);
/* Do sysrq handling. */
if (uart_handle_break(port))
return 0;
pr_debug("sci: BREAK detected\n");
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
}
} else {
/* frame error */
if (tty_insert_flip_char(tty, 0, TTY_FRAME))
copied++;
pr_debug("sci: frame error\n");
}
}
if (status & SCxSR_PER(port)) {
/* parity error */
if (tty_insert_flip_char(tty, 0, TTY_PARITY))
copied++;
pr_debug("sci: parity error\n");
}
if (copied)
tty_flip_buffer_push(tty);
return copied;
}
static inline int sci_handle_breaks(struct uart_port *port)
{
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
struct tty_struct *tty = port->info->tty;
struct sci_port *s = &sci_ports[port->line];
if (uart_handle_break(port))
return 0;
if (!s->break_flag && status & SCxSR_BRK(port)) {
#if defined(CONFIG_CPU_SH3)
/* Debounce break */
s->break_flag = 1;
#endif
/* Notify of BREAK */
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
pr_debug("sci: BREAK detected\n");
}
#if defined(SCIF_ORER)
/* XXX: Handle SCIF overrun error */
if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
sci_out(port, SCLSR, 0);
if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
copied++;
pr_debug("sci: overrun error\n");
}
}
#endif
if (copied)
tty_flip_buffer_push(tty);
return copied;
}
static irqreturn_t sci_rx_interrupt(int irq, void *port)
{
/* I think sci_receive_chars has to be called irrespective
* of whether the I_IXOFF is set, otherwise, how is the interrupt
* to be disabled?
*/
sci_receive_chars(port);
return IRQ_HANDLED;
}
static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
spin_lock_irq(&port->lock);
sci_transmit_chars(port);
spin_unlock_irq(&port->lock);
return IRQ_HANDLED;
}
static irqreturn_t sci_er_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
/* Handle errors */
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
/* discard character in rx buffer */
sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
} else {
#if defined(SCIF_ORER)
if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
struct tty_struct *tty = port->info->tty;
sci_out(port, SCLSR, 0);
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
tty_flip_buffer_push(tty);
pr_debug("scif: overrun error\n");
}
#endif
sci_rx_interrupt(irq, ptr);
}
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
/* Kick the transmission */
sci_tx_interrupt(irq, ptr);
return IRQ_HANDLED;
}
static irqreturn_t sci_br_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
/* Handle BREAKs */
sci_handle_breaks(port);
sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
return IRQ_HANDLED;
}
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status;
struct uart_port *port = ptr;
ssr_status = sci_in(port,SCxSR);
scr_status = sci_in(port,SCSCR);
/* Tx Interrupt */
if ((ssr_status & 0x0020) && (scr_status & 0x0080))
sci_tx_interrupt(irq, ptr);
/* Rx Interrupt */
if ((ssr_status & 0x0002) && (scr_status & 0x0040))
sci_rx_interrupt(irq, ptr);
/* Error Interrupt */
if ((ssr_status & 0x0080) && (scr_status & 0x0400))
sci_er_interrupt(irq, ptr);
/* Break Interrupt */
if ((ssr_status & 0x0010) && (scr_status & 0x0200))
sci_br_interrupt(irq, ptr);
return IRQ_HANDLED;
}
#ifdef CONFIG_CPU_FREQ
/*
* Here we define a transistion notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
*/
static int sci_notifier(struct notifier_block *self,
unsigned long phase, void *p)
{
struct cpufreq_freqs *freqs = p;
int i;
if ((phase == CPUFREQ_POSTCHANGE) ||
(phase == CPUFREQ_RESUMECHANGE)){
for (i = 0; i < SCI_NPORTS; i++) {
struct uart_port *port = &sci_ports[i].port;
struct clk *clk;
/*
* Update the uartclk per-port if frequency has
* changed, since it will no longer necessarily be
* consistent with the old frequency.
*
* Really we want to be able to do something like
* uart_change_speed() or something along those lines
* here to implicitly reset the per-port baud rate..
*
* Clean this up later..
*/
clk = clk_get(NULL, "module_clk");
port->uartclk = clk_get_rate(clk) * 16;
clk_put(clk);
}
printk(KERN_INFO "%s: got a postchange notification "
"for cpu %d (old %d, new %d)\n",
__FUNCTION__, freqs->cpu, freqs->old, freqs->new);
}
return NOTIFY_OK;
}
static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
#endif /* CONFIG_CPU_FREQ */
static int sci_request_irq(struct sci_port *port)
{
int i;
irqreturn_t (*handlers[4])(int irq, void *ptr) = {
sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
sci_br_interrupt,
};
const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
"SCI Transmit Data Empty", "SCI Break" };
if (port->irqs[0] == port->irqs[1]) {
if (!port->irqs[0]) {
printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
return -ENODEV;
}
if (request_irq(port->irqs[0], sci_mpxed_interrupt,
IRQF_DISABLED, "sci", port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
}
} else {
for (i = 0; i < ARRAY_SIZE(handlers); i++) {
if (!port->irqs[i])
continue;
if (request_irq(port->irqs[i], handlers[i],
IRQF_DISABLED, desc[i], port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
}
}
}
return 0;
}
static void sci_free_irq(struct sci_port *port)
{
int i;
if (port->irqs[0] == port->irqs[1]) {
if (!port->irqs[0])
printk("sci: sci_free_irq error\n");
else
free_irq(port->irqs[0], port);
} else {
for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
if (!port->irqs[i])
continue;
free_irq(port->irqs[i], port);
}
}
}
static unsigned int sci_tx_empty(struct uart_port *port)
{
/* Can't detect */
return TIOCSER_TEMT;
}
static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
/* This routine is used for seting signals of: DTR, DCD, CTS/RTS */
/* We use SCIF's hardware for CTS/RTS, so don't need any for that. */
/* If you have signals for DTR and DCD, please implement here. */
}
static unsigned int sci_get_mctrl(struct uart_port *port)
{
/* This routine is used for geting signals of: DTR, DCD, DSR, RI,
and CTS/RTS */
return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
}
static void sci_start_tx(struct uart_port *port)
{
unsigned short ctrl;
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
ctrl |= SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
}
static void sci_stop_tx(struct uart_port *port)
{
unsigned short ctrl;
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
ctrl &= ~SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
}
static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
{
unsigned short ctrl;
/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
sci_out(port, SCSCR, ctrl);
}
static void sci_stop_rx(struct uart_port *port)
{
unsigned short ctrl;
/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
sci_out(port, SCSCR, ctrl);
}
static void sci_enable_ms(struct uart_port *port)
{
/* Nothing here yet .. */
}
static void sci_break_ctl(struct uart_port *port, int break_state)
{
/* Nothing here yet .. */
}
static int sci_startup(struct uart_port *port)
{
struct sci_port *s = &sci_ports[port->line];
if (s->enable)
s->enable(port);
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
s->clk = clk_get(NULL, "module_clk");
#endif
sci_request_irq(s);
sci_start_tx(port);
sci_start_rx(port, 1);
return 0;
}
static void sci_shutdown(struct uart_port *port)
{
struct sci_port *s = &sci_ports[port->line];
sci_stop_rx(port);
sci_stop_tx(port);
sci_free_irq(s);
if (s->disable)
s->disable(port);
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
clk_put(s->clk);
s->clk = NULL;
#endif
}
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
int t;
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
switch (baud) {
case 0:
t = -1;
break;
default:
{
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
t = SCBRR_VALUE(baud, clk_get_rate(s->clk));
#else
t = SCBRR_VALUE(baud);
#endif
break;
}
}
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TEND(port)));
sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF)
sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
#endif
smr_val = sci_in(port, SCSMR) & 3;
if ((termios->c_cflag & CSIZE) == CS7)
smr_val |= 0x40;
if (termios->c_cflag & PARENB)
smr_val |= 0x20;
if (termios->c_cflag & PARODD)
smr_val |= 0x30;
if (termios->c_cflag & CSTOPB)
smr_val |= 0x08;
uart_update_timeout(port, termios->c_cflag, baud);
sci_out(port, SCSMR, smr_val);
if (t > 0) {
if(t >= 256) {
sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
t >>= 2;
} else {
sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
}
sci_out(port, SCBRR, t);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
if (likely(s->init_pins))
s->init_pins(port, termios->c_cflag);
sci_out(port, SCSCR, SCSCR_INIT(port));
if ((termios->c_cflag & CREAD) != 0)
sci_start_rx(port,0);
}
static const char *sci_type(struct uart_port *port)
{
switch (port->type) {
case PORT_SCI: return "sci";
case PORT_SCIF: return "scif";
case PORT_IRDA: return "irda";
}
return 0;
}
static void sci_release_port(struct uart_port *port)
{
/* Nothing here yet .. */
}
static int sci_request_port(struct uart_port *port)
{
/* Nothing here yet .. */
return 0;
}
static void sci_config_port(struct uart_port *port, int flags)
{
struct sci_port *s = &sci_ports[port->line];
port->type = s->type;
switch (port->type) {
case PORT_SCI:
s->init_pins = sci_init_pins_sci;
break;
case PORT_SCIF:
s->init_pins = sci_init_pins_scif;
break;
case PORT_IRDA:
s->init_pins = sci_init_pins_irda;
break;
}
#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
if (port->mapbase == 0)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
port->membase = (void __iomem *)port->mapbase;
#endif
}
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
struct sci_port *s = &sci_ports[port->line];
if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS)
return -EINVAL;
if (ser->baud_base < 2400)
/* No paper tape reader for Mitch.. */
return -EINVAL;
return 0;
}
static struct uart_ops sci_uart_ops = {
.tx_empty = sci_tx_empty,
.set_mctrl = sci_set_mctrl,
.get_mctrl = sci_get_mctrl,
.start_tx = sci_start_tx,
.stop_tx = sci_stop_tx,
.stop_rx = sci_stop_rx,
.enable_ms = sci_enable_ms,
.break_ctl = sci_break_ctl,
.startup = sci_startup,
.shutdown = sci_shutdown,
.set_termios = sci_set_termios,
.type = sci_type,
.release_port = sci_release_port,
.request_port = sci_request_port,
.config_port = sci_config_port,
.verify_port = sci_verify_port,
};
static void __init sci_init_ports(void)
{
static int first = 1;
int i;
if (!first)
return;
first = 0;
for (i = 0; i < SCI_NPORTS; i++) {
sci_ports[i].port.ops = &sci_uart_ops;
sci_ports[i].port.iotype = UPIO_MEM;
sci_ports[i].port.line = i;
sci_ports[i].port.fifosize = 1;
#if defined(__H8300H__) || defined(__H8300S__)
#ifdef __H8300S__
sci_ports[i].enable = h8300_sci_enable;
sci_ports[i].disable = h8300_sci_disable;
#endif
sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
#elif defined(CONFIG_SUPERH64)
sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16;
#else
/*
* XXX: We should use a proper SCI/SCIF clock
*/
{
struct clk *clk = clk_get(NULL, "module_clk");
sci_ports[i].port.uartclk = clk_get_rate(clk) * 16;
clk_put(clk);
}
#endif
sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
sci_ports[i].break_timer.function = sci_break_timer;
init_timer(&sci_ports[i].break_timer);
}
}
int __init early_sci_setup(struct uart_port *port)
{
if (unlikely(port->line > SCI_NPORTS))
return -ENODEV;
sci_init_ports();
sci_ports[port->line].port.membase = port->membase;
sci_ports[port->line].port.mapbase = port->mapbase;
sci_ports[port->line].port.type = port->type;
return 0;
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
*/
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
put_string(serial_console_port, s, count);
}
static int __init serial_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
int ret;
/*
* Check whether an invalid uart number has been specified, and
* if so, search for the first available port that does have
* console support.
*/
if (co->index >= SCI_NPORTS)
co->index = 0;
serial_console_port = &sci_ports[co->index];
port = &serial_console_port->port;
/*
* Also need to check port->type, we don't actually have any
* UPIO_PORT ports, but uart_report_port() handily misreports
* it anyways if we don't have a port available by the time this is
* called.
*/
if (!port->type)
return -ENODEV;
if (!port->membase || !port->mapbase)
return -ENODEV;
port->type = serial_console_port->type;
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
if (!serial_console_port->clk)
serial_console_port->clk = clk_get(NULL, "module_clk");
#endif
if (port->flags & UPF_IOREMAP)
sci_config_port(port, 0);
if (serial_console_port->enable)
serial_console_port->enable(port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
ret = uart_set_options(port, co, baud, parity, bits, flow);
#if defined(__H8300H__) || defined(__H8300S__)
/* disable rx interrupt */
if (ret == 0)
sci_stop_rx(port);
#endif
return ret;
}
static struct console serial_console = {
.name = "ttySC",
.device = uart_console_device,
.write = serial_console_write,
.setup = serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &sci_uart_driver,
};
static int __init sci_console_init(void)
{
sci_init_ports();
register_console(&serial_console);
return 0;
}
console_initcall(sci_console_init);
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
#ifdef CONFIG_SH_KGDB_CONSOLE
/*
* FIXME: Most of this can go away.. at the moment, we rely on
* arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
* most of that can easily be done here instead.
*
* For the time being, just accept the values that were parsed earlier..
*/
static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
*baud = kgdb_baud;
*parity = tolower(kgdb_parity);
*bits = kgdb_bits - '0';
}
/*
* The naming here is somewhat misleading, since kgdb_console_setup() takes
* care of the early-on initialization for kgdb, regardless of whether we
* actually use kgdb as a console or not.
*
* On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
*/
int __init kgdb_console_setup(struct console *co, char *options)
{
struct uart_port *port = &sci_ports[kgdb_portnum].port;
int baud = 38400;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (co->index != kgdb_portnum)
co->index = kgdb_portnum;
kgdb_sci_port = &sci_ports[co->index];
port = &kgdb_sci_port->port;
/*
* Also need to check port->type, we don't actually have any
* UPIO_PORT ports, but uart_report_port() handily misreports
* it anyways if we don't have a port available by the time this is
* called.
*/
if (!port->type)
return -ENODEV;
if (!port->membase || !port->mapbase)
return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
kgdb_console_get_options(port, &baud, &parity, &bits);
kgdb_getchar = kgdb_sci_getchar;
kgdb_putchar = kgdb_sci_putchar;
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct console kgdb_console = {
.name = "ttySC",
.device = uart_console_device,
.write = kgdb_console_write,
.setup = kgdb_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &sci_uart_driver,
};
/* Register the KGDB console so we get messages (d'oh!) */
static int __init kgdb_console_init(void)
{
sci_init_ports();
register_console(&kgdb_console);
return 0;
}
console_initcall(kgdb_console_init);
#endif /* CONFIG_SH_KGDB_CONSOLE */
#if defined(CONFIG_SH_KGDB_CONSOLE)
#define SCI_CONSOLE &kgdb_console
#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#define SCI_CONSOLE &serial_console
#else
#define SCI_CONSOLE 0
#endif
static char banner[] __initdata =
KERN_INFO "SuperH SCI(F) driver initialized\n";
static struct uart_driver sci_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "sci",
.dev_name = "ttySC",
.major = SCI_MAJOR,
.minor = SCI_MINOR_START,
.nr = SCI_NPORTS,
.cons = SCI_CONSOLE,
};
/*
* Register a set of serial devices attached to a platform device. The
* list is terminated with a zero flags entry, which means we expect
* all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need
* remapping (such as sh64) should also set UPF_IOREMAP.
*/
static int __devinit sci_probe(struct platform_device *dev)
{
struct plat_sci_port *p = dev->dev.platform_data;
int i;
for (i = 0; p && p->flags != 0; p++, i++) {
struct sci_port *sciport = &sci_ports[i];
/* Sanity check */
if (unlikely(i == SCI_NPORTS)) {
dev_notice(&dev->dev, "Attempting to register port "
"%d when only %d are available.\n",
i+1, SCI_NPORTS);
dev_notice(&dev->dev, "Consider bumping "
"CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
break;
}
sciport->port.mapbase = p->mapbase;
/*
* For the simple (and majority of) cases where we don't need
* to do any remapping, just cast the cookie directly.
*/
if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP))
p->membase = (void __iomem *)p->mapbase;
sciport->port.membase = p->membase;
sciport->port.irq = p->irqs[SCIx_TXI_IRQ];
sciport->port.flags = p->flags;
sciport->port.dev = &dev->dev;
sciport->type = sciport->port.type = p->type;
memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
uart_add_one_port(&sci_uart_driver, &sciport->port);
}
#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
kgdb_sci_port = &sci_ports[kgdb_portnum];
kgdb_getchar = kgdb_sci_getchar;
kgdb_putchar = kgdb_sci_putchar;
#endif
#ifdef CONFIG_CPU_FREQ
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
dev_info(&dev->dev, "CPU frequency notifier registered\n");
#endif
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_gdb_detach();
#endif
return 0;
}
static int __devexit sci_remove(struct platform_device *dev)
{
int i;
for (i = 0; i < SCI_NPORTS; i++)
uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
return 0;
}
static int sci_suspend(struct platform_device *dev, pm_message_t state)
{
int i;
for (i = 0; i < SCI_NPORTS; i++) {
struct sci_port *p = &sci_ports[i];
if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
uart_suspend_port(&sci_uart_driver, &p->port);
}
return 0;
}
static int sci_resume(struct platform_device *dev)
{
int i;
for (i = 0; i < SCI_NPORTS; i++) {
struct sci_port *p = &sci_ports[i];
if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
uart_resume_port(&sci_uart_driver, &p->port);
}
return 0;
}
static struct platform_driver sci_driver = {
.probe = sci_probe,
.remove = __devexit_p(sci_remove),
.suspend = sci_suspend,
.resume = sci_resume,
.driver = {
.name = "sh-sci",
.owner = THIS_MODULE,
},
};
static int __init sci_init(void)
{
int ret;
printk(banner);
sci_init_ports();
ret = uart_register_driver(&sci_uart_driver);
if (likely(ret == 0)) {
ret = platform_driver_register(&sci_driver);
if (unlikely(ret))
uart_unregister_driver(&sci_uart_driver);
}
return ret;
}
static void __exit sci_exit(void)
{
platform_driver_unregister(&sci_driver);
uart_unregister_driver(&sci_uart_driver);
}
module_init(sci_init);
module_exit(sci_exit);
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink