leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4cca959326
linux/arch/arm/boot/dts
History
Hiroshi Doyu 4cca959326 ARM: tegra: fix Tegra114 IOMMU register address 
The IOMMU node's reg property contains completely bogus values! Somehow,
this had no practical effect, despite the fact the IOMMU driver appears
to be writing to those registers. I suppose that since no HW modules is
actually at that address, the writes simply had no effect.

Note that I'm not CCing stable here, even though the problem exists as
far back as v3.9, simply because this patch doesn't fix any observed
issue, and I don't want to run the risk of suddenly writing to some
registers and causing a regression.

Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
[swarren, wrote commit description]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-30 17:38:27 -07:00
..
include kbuild: create an "include chroot" for DT bindings 2013-04-05 12:22:32 -06:00
testcases
aks-cdu.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
am33xx.dtsi ARM: dts: AM33xx: Add RNG node 2013-10-29 13:58:51 -07:00
am43x-epos-evm.dts ARM: dts: AM4372: Update Support for EPOS EVM 2013-10-20 19:16:55 +02:00
am335x-base0033.dts ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. 2013-10-11 21:06:37 +02:00
am335x-bone-common.dtsi ARM: dts: am335x-bone-common: correct mux mode for cmd line 2013-10-11 21:06:38 +02:00
am335x-bone.dts ARM: dts: AM33XX: Add AES data and documentation 2013-10-11 21:06:40 +02:00
am335x-boneblack.dts ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display 2013-10-11 21:06:42 +02:00
am335x-evm.dts ARM: dts: am335x-evm: Add audio support for am335x-evm.dts 2013-10-20 19:16:56 +02:00
am335x-evmsk.dts ARM: dts: am335x-evmsk: Audio support 2013-10-20 19:16:57 +02:00
am335x-igep0033.dtsi ARM: dts: igep0033: Add mmc1 node for SDCARD support. 2013-10-22 10:58:41 +02:00
am335x-nano.dts ARM: dts: Add support for Newflow NanoBone board 2013-10-22 14:56:33 +02:00
am3517_mt_ventoux.dts ARM: dts: AM3XXX: Use #include for all device trees 2013-06-18 18:53:41 -05:00
am3517-evm.dts ARM: dts: AM3XXX: Use #include for all device trees 2013-06-18 18:53:41 -05:00
am4372.dtsi ARM: dts: AM33xx+: Add i2c aliases 2013-10-22 11:05:42 +02:00
animeo_ip.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
armada-370-db.dts ARM: mvebu: Add BootROM to Armada 370/XP device tree 2013-08-06 14:11:20 +00:00
armada-370-mirabox.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-370-netgear-rn102.dts ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102 2013-10-01 00:46:30 +00:00
armada-370-rd.dts ARM: mvebu: Relocate PCIe node in Armada 370 RD board 2013-08-09 13:17:17 +00:00
armada-370-xp.dtsi ARM: mvebu: Add the core-divider clock to Armada 370/XP 2013-10-23 11:04:31 +00:00
armada-370.dtsi ARM: mvebu: link PCIe controllers to the MSI controller 2013-09-30 15:00:27 +00:00
armada-xp-axpwifiap.dts ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding 2013-08-07 20:05:05 +00:00
armada-xp-db.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-xp-gp.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-xp-matrix.dts arm: mvebu: add support for the Armada XP Matrix board 2013-10-03 15:13:01 +00:00
armada-xp-mv78230.dtsi ARM: mvebu: link PCIe controllers to the MSI controller 2013-09-30 15:00:27 +00:00
armada-xp-mv78260.dtsi ARM: mvebu: link PCIe controllers to the MSI controller 2013-09-30 15:00:27 +00:00
armada-xp-mv78460.dtsi ARM: mvebu: link PCIe controllers to the MSI controller 2013-09-30 15:00:27 +00:00
armada-xp-openblocks-ax3-4.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-xp.dtsi Changes needed to prepare for making omap3 device tree only: 2013-10-14 15:29:24 -07:00
at91-ariag25.dts ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled 2013-05-31 16:42:27 +02:00
at91-foxg20.dts ARM: at91: switch Fox G20 board .dts to pre-processor defines 2013-05-31 16:42:28 +02:00
at91rm9200_pqfp.dtsi ARM: at91/dt: add at91rm9200 PQFP package version 2013-08-21 12:18:52 +02:00
at91rm9200.dtsi ARM: at91: at91rm9200: set default mmc0 pinctrl-names 2013-08-21 11:40:22 +02:00
at91rm9200ek.dts ARM: at91: dt: rm9200ek: add spi support 2013-06-26 10:13:39 +02:00
at91sam9g15.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g15ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g20.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g20ek_2mmc.dts ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
at91sam9g20ek_common.dtsi ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek 2013-10-18 16:50:13 +02:00
at91sam9g20ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
at91sam9g25.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g25ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g35.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g35ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g45.dtsi Again some nice DT updates for AT91: 2013-06-14 18:51:21 -07:00
at91sam9m10g45ek.dts ARM: at91: sam9m10g45ek add udc DT support 2013-06-15 00:15:22 +02:00
at91sam9n12.dtsi ARM: at91: add ssc dma parameter for at91sam9n12 2013-10-14 09:42:38 +02:00
at91sam9n12ek.dts ARM: at91: add sound support on at91sam9n12ek board 2013-10-14 09:43:26 +02:00
at91sam9x5.dtsi ARM: at91: at91sam9x5: set default mmc[01] pinctrl-names 2013-09-19 15:23:33 +02:00
at91sam9x5cm.dtsi ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
at91sam9x5ek.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
at91sam9x25.dtsi ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
at91sam9x25ek.dts Adding the DT support to USB gadget High-Speed aka usba. 2013-06-14 18:58:28 -07:00
at91sam9x35.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9x35ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9260.dtsi ARM: at91: at91sam9260: add missing pinctrl-names on mmc 2013-08-21 11:14:18 +02:00
at91sam9263.dtsi Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dt 2013-06-07 16:39:38 -07:00
at91sam9263ek.dts ARM: at91/dts: add the watchdog nodes for at91 boards 2013-05-31 21:54:50 +02:00
atlas6-evb.dts ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board 2013-03-18 17:15:33 +01:00
atlas6.dtsi ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes 2013-10-29 12:40:58 -07:00
bcm2835-rpi-b.dts ARM: bcm2835: Add Raspberry Pi's ACT LED to DT 2013-05-16 20:29:48 -06:00
bcm2835.dtsi ARM: bcm2835: override the HW UART periphid 2013-06-02 11:50:41 -07:00
bcm11351-brt.dts ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) 2013-08-20 10:47:47 -07:00
bcm11351.dtsi ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) 2013-08-20 10:47:47 -07:00
bcm28155-ap.dts ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) 2013-08-20 10:47:47 -07:00
cros5250-common.dtsi ARM: dts: change compatible strings for EXYNOS5250 hdmi subsystem 2013-06-28 21:13:57 +09:00
da850-enbw-cmc.dts ARM: davinci: da850: Use #include for all device trees 2013-06-20 15:04:30 +05:30
da850-evm.dts ARM: davinci: da850: add DT node for ethernet 2013-08-22 00:44:58 +05:30
da850.dtsi ARM: davinci: da850: do not specify clock_frequency for UART DT node 2013-08-22 00:44:58 +05:30
dove-cm-a510.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove-cubox.dts ARM: Dove: fix bad properties of the si5351 clkout2 used by Cubox audio 2013-10-09 13:22:41 +00:00
dove-d2plug.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove-d3plug.dts ARM: dove: add initial DT file for Globalscale D3Plug 2013-09-30 15:00:54 +00:00
dove-dove-db.dts ARM: dove: use preprocessor on device tree files 2013-09-30 15:00:35 +00:00
dove.dtsi ARM: Dove: Add the audio device to the Cubox DT 2013-10-09 13:20:23 +00:00
dra7-evm.dts ARM: dts: dra7-evm: add smps123 supply for CPU 2013-10-22 17:33:17 +02:00
dra7.dtsi ARM: dts: DRA7: Add CPU OPP table 2013-10-22 17:33:40 +02:00
ea3250.dts
ecx-2000.dts
ecx-common.dtsi sata highbank: add bit-banged SGPIO driver support 2013-06-06 14:05:24 -07:00
elpida_ecb240abacn.dtsi
emev2-kzm9d-reference.dts ARM: shmobile: kzm9d: remove nfsroot settings from bootargs 2013-08-06 18:07:13 +09:00
emev2-kzm9d.dts ARM: shmobile: kzm9d: remove nfsroot settings from bootargs 2013-08-06 18:07:13 +09:00
emev2.dtsi ARM: shmobile: emev2: add PMU information to emev2.dtsi 2013-07-31 15:31:16 +09:00
ethernut5.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
evk-pro3.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
exynos4.dtsi ARM: dts: Add MIPI PHY node to exynos4.dtsi 2013-10-06 09:14:39 +09:00
exynos4x12-pinctrl.dtsi ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals 2013-08-06 02:49:43 +09:00
exynos4x12.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
exynos5.dtsi ARM: dts: Fix the RTC DT node name for Exynos5250 2013-08-26 02:28:05 +09:00
exynos4210-origen.dts ARM: dts: Add fixed voltage regulator to simple bus for origen 2013-10-06 09:21:23 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes 2013-08-07 01:08:24 +09:00
exynos4210-smdkv310.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4210-trats.dts ARM: dts: Add S5K5BA sensor regulator definitions for Trats board 2013-08-07 01:08:25 +09:00
exynos4210-universal_c210.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4210.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
exynos4212.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4412-odroidx.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4412-origen.dts ARM: dts: Add fixed voltage regulator to simple bus for origen 2013-10-06 09:21:23 +09:00
exynos4412-smdk4412.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4412-trats2.dts ARM: dts: Add SPI1 controller and s5c73m3 sensor node for TRATS2 2013-08-07 01:07:57 +09:00
exynos4412.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos5250-arndale.dts ARM: dts: Add HDMI related I2C nodes for Arndale board 2013-10-08 06:53:12 +09:00
exynos5250-pinctrl.dtsi ARM SoC device tree changes 2013-07-02 14:23:01 -07:00
exynos5250-smdk5250.dts ARM: dts: Disable Exynos5250 I2S controllers by default 2013-10-07 23:13:47 +09:00
exynos5250-snow.dts ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC 2013-08-26 02:28:05 +09:00
exynos5250.dtsi Merge most of tag 'tags/exynos-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git into next/dt 2013-10-27 21:54:02 -07:00
exynos5420-pinctrl.dtsi ARM: dts: Add pin state information for DP HPD support to Exynos5420 2013-08-19 01:56:31 +09:00
exynos5420-smdk5420.dts ARM: dts: enable hdmi subsystem for exynos5420 smdk board 2013-10-08 06:49:46 +09:00
exynos5420.dtsi ARM: dts: add dt nodes for hdmi subsystem for exynos5420 2013-10-08 06:49:46 +09:00
exynos5440-sd5v1.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos5440-ssdk5440.dts ARM: dts: use 'status' property for PCIe nodes 2013-10-29 12:45:57 -07:00
exynos5440.dtsi ARM: dts: use 'status' property for PCIe nodes 2013-10-29 12:45:57 -07:00
ge863-pro3.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
highbank.dts
imx6dl-pinfunc.h ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-sabreauto.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-sabresd.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-wandboard.dts ARM: dts: imx6: Add support for imx6q wandboard 2013-08-22 23:29:28 +08:00
imx6dl.dtsi ARM: dts: imx: ocram size is different between imx6q and imx6dl 2013-08-22 23:29:44 +08:00
imx6q-arm2.dts ARM: dts: imx6qdl/imx6sl: add the dma property for uart 2013-08-22 23:29:16 +08:00
imx6q-phytec-pbab01.dts ARM: dts: Phytec imx6q pfla02 and pbab01 support 2013-06-17 16:04:31 +08:00
imx6q-phytec-pfla02.dtsi ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module 2013-08-22 23:29:50 +08:00
imx6q-pinfunc.h ARM: dts: imx6q: add quirky select input for USB_OTG_ID 2013-09-26 13:01:37 +08:00
imx6q-sabreauto.dts ARM: dtsi: enable ahci sata on imx6q platforms 2013-08-22 23:29:25 +08:00
imx6q-sabrelite.dts ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog 2013-09-29 15:37:33 +08:00
imx6q-sabresd.dts ARM: dtsi: enable ahci sata on imx6q platforms 2013-08-22 23:29:25 +08:00
imx6q-sbc6x.dts ARM: dts: MicroSys sbc6x support (i.MX6) 2013-04-09 22:53:37 +08:00
imx6q-udoo.dts ARM: dts: imx6q-udoo: Add initial board support 2013-09-27 13:31:44 +08:00
imx6q-wandboard.dts ARM: dts: imx6q-wandboard: Add sata support 2013-08-22 23:29:30 +08:00
imx6q.dtsi ARM: dts: imx: ocram size is different between imx6q and imx6dl 2013-08-22 23:29:44 +08:00
imx6qdl-sabreauto.dtsi ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3 2013-09-26 13:01:35 +08:00
imx6qdl-sabresd.dtsi ARM: dts: imx6qdl-sabresd: Add backlight support for lvds 2013-10-12 16:15:05 +08:00
imx6qdl-wandboard.dtsi ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios 2013-09-29 15:37:46 +08:00
imx6qdl.dtsi ARM: dts: imx6qdl: add pcie device node 2013-09-29 14:54:44 +08:00
imx6sl-evk.dts ARM: dts: imx6sl-evk: enable the SPI NOR 2013-10-18 16:27:45 +08:00
imx6sl-pinfunc.h pinctrl: add pinctrl driver for imx6sl 2013-04-09 22:53:38 +08:00
imx6sl.dtsi ARM: imx: imx6sl iomuxc syscon is compatible to imx6q 2013-10-18 23:27:37 +08:00
imx23-evk.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx23-olinuxino.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx23-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx23-stmp378x_devb.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx23.dtsi ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx25-karo-tx25.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx25-pdk.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx25.dtsi ARM: dts: imx25: Make lcdc compatible to imx21 fb 2013-08-22 23:29:15 +08:00
imx27-apf27.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx27-apf27dev.dts ARM: imx27-apf27dev: Add framebuffer support 2013-10-08 14:36:41 +08:00
imx27-pdk.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx27-phytec-phycard-s-rdk.dts ARM: dts: imx27 phyCARD-S, i2c ADC device node 2013-08-22 23:29:05 +08:00
imx27-phytec-phycard-s-som.dts ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk 2013-08-22 23:29:03 +08:00
imx27-phytec-phycore-rdk.dts ARM: dts: imx27-phytec-phycore-rdk: Add CAN node 2013-08-22 23:28:56 +08:00
imx27-phytec-phycore-som.dts ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX 2013-08-22 23:29:57 +08:00
imx27.dtsi ARM: imx27: add missing #pwm-cells property 2013-10-18 16:27:01 +08:00
imx28-apf28.dts ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers 2013-09-26 13:01:36 +08:00
imx28-apf28dev.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-apx4devkit.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10036.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10037.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10049.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10055.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10056.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10057.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-cfa10058.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-evk.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-m28cu3.dts ARM: dts: mxs: Add MSR M28CU3 board 2013-10-05 10:16:33 +08:00
imx28-m28evk.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx28-sps1.dts ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 2013-09-26 13:01:37 +08:00
imx28-tx28.dts ARM: dts: tx28: restructure and update DTS file 2013-09-26 13:01:37 +08:00
imx28.dtsi ARM: dts: mxs: Add muxing options for the SSP2 MMC 2013-09-27 09:31:17 +08:00
imx31-bug.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx31.dtsi ARM: dts: imx: Add the missing cpus node 2013-08-22 23:29:01 +08:00
imx35-pinfunc.h pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx51-apf51.dts ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template 2013-08-22 23:29:53 +08:00
imx51-apf51dev.dts ARM: imx51-apf51dev: Add parallel display support 2013-10-08 14:36:33 +08:00
imx51-babbage.dts ARM: dts: imx51-babbage: Make DVI and WVGA panel functional 2013-10-09 09:38:17 +08:00
imx51-pinfunc.h pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx51.dtsi ARM: dts: i.MX51: Add W1 devicetree node 2013-09-26 13:01:31 +08:00
imx53-ard.dts pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx53-evk.dts pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx53-m53evk.dts ARM: mx5: Add support for DENX M53EVK 2013-06-17 16:04:16 +08:00
imx53-mba53.dts ARM i.MX53: mba53: Fix PWM backlight DT node 2013-07-15 08:28:10 +08:00
imx53-pinfunc.h ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration 2013-04-09 22:53:37 +08:00
imx53-qsb.dts ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source 2013-10-06 19:53:22 +08:00
imx53-smd.dts pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx53-tqma53.dtsi ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2 2013-06-17 16:04:26 +08:00
imx53-tx53.dtsi ARM: dts: add Ka-Ro tx53 devicetree 2013-06-17 16:04:18 +08:00
imx53.dtsi ARM: imx: add ocram clock for imx53 2013-08-22 23:29:46 +08:00
integrator.dtsi
integratorap.dts ARM: integrator: set local side PCI addresses right 2013-06-27 14:19:12 +02:00
integratorcp.dts ARM: integrator-cp: convert use CLKSRC_OF for timer init 2013-04-11 15:11:21 -05:00
keystone.dts ARM: Keystone: Convert device tree file to use IRQ defines 2013-08-05 14:06:24 -04:00
kirkwood-98dx4122.dtsi
kirkwood-6281.dtsi ARM: kirkwood: Relocate PCIe device tree nodes 2013-08-06 14:11:53 +00:00
kirkwood-6282.dtsi ARM: kirkwood: Relocate PCIe device tree nodes 2013-08-06 14:11:53 +00:00
kirkwood-cloudbox.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-db-88f6281.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-db-88f6282.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-db.dtsi ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-dns320.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-dns325.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-dnskw.dtsi ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-dockstar.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-dreamplug.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-goflexnet.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-guruplug-server-plus.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-ib62x0.dts ARM: kirkwood: ib62x0: add u-boot environment partition 2013-10-03 12:52:47 +00:00
kirkwood-iconnect.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-iomega_ix2_200.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-is2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-km_kirkwood.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-lschlv2.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxhl.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxl.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-mplcec4.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-mv88f6281gtw-ge.dts ARM: kirkwood: use dts pre-processor for mv88f6281gtw-ge 2013-08-06 16:14:14 +00:00
kirkwood-netgear_readynas_duo_v2.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-ns2-common.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2lite.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2max.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2mini.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-nsa310-common.dtsi ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-nsa310.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-nsa310a.dts ARM: kirkwood: use dts pre-processor for nsa310 boards 2013-08-16 13:02:08 +00:00
kirkwood-openblocks_a6.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-sheevaplug-common.dtsi ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-sheevaplug-esata.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-sheevaplug.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-topkick.dts ARM: kirkwood: Move the nand node under the mbus node 2013-10-01 16:36:12 +00:00
kirkwood-ts219-6281.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ts219-6282.dts ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding 2013-10-01 16:28:03 +00:00
kirkwood-ts219.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood.dtsi Changes needed to prepare for making omap3 device tree only: 2013-10-14 15:29:24 -07:00
kizbox.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
lpc32xx.dtsi ARM: dts: lpc32xx: cpus/cpu nodes dts updates 2013-05-23 10:45:13 +01:00
Makefile Some more dts changes via Benoit Cousson <bcousson@baylibre.com>: 2013-10-28 14:47:50 -07:00
marco-evb.dts
marco.dtsi
mmp2-brownstone.dts
mmp2.dtsi ARM: mmp: add more compatible names in gpio driver 2013-04-11 10:00:34 +08:00
mpa1600.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
msm8660-surf.dts ARM: dts: msm: Update uartdm compatible strings 2013-08-28 16:03:29 -07:00
msm8960-cdp.dts TTY/Serial driver patches for 3.12-rc1 2013-09-03 11:38:36 -07:00
mxs-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
nspire-classic.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-clp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-cx.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-tp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
omap2.dtsi Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt 2013-06-20 23:01:41 +02:00
omap3-beagle-xm.dts Merge branches 'omap-for-v3.13/dt' and 'omap-for-v3.13/quirk' into omap-for-v3.13/board-removal 2013-10-14 11:33:07 -07:00
omap3-beagle.dts ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework 2013-10-20 19:16:57 +02:00
omap3-devkit8000.dts ARM: dts: omap3-devkit8000: fix a typo in GMPC node 2013-10-11 21:06:33 +02:00
omap3-evm-37xx.dts ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) 2013-10-14 11:34:37 -07:00
omap3-evm-common.dtsi ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) 2013-10-14 11:34:37 -07:00
omap3-evm.dts ARM: dts: Add common support for omap3-evm 2013-10-14 11:34:37 -07:00
omap3-gta04.dts ARM: dts: omap3: Adapt USB OTG to generic PHY framework 2013-10-20 19:16:08 +02:00
omap3-igep0020.dts ARM: dts: Shared file for omap GPMC connected smsc911x 2013-10-14 11:34:37 -07:00
omap3-igep0030.dts ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file 2013-10-08 17:51:40 +02:00
omap3-igep.dtsi ARM: dts: omap3-igep: Add USB OTG support 2013-10-11 21:06:43 +02:00
omap3-n9.dts ARM: dts: add minimal DT support for Nokia N950 & N9 phones 2013-10-18 10:24:33 -07:00
omap3-n900.dts ARM: dts: omap3-n900: Add LP5523 support 2013-10-23 10:14:58 +02:00
omap3-n950-n9.dtsi ARM: dts: add minimal DT support for Nokia N950 & N9 phones 2013-10-18 10:24:33 -07:00
omap3-n950.dts ARM: dts: add minimal DT support for Nokia N950 & N9 phones 2013-10-18 10:24:33 -07:00
omap3-overo.dtsi ARM: dts: omap3-overo: Add default trigger for TWL4030 LED 2013-06-19 04:38:15 -05:00
omap3-tobi.dts ARM: dts: omap3-tobi: Correct polarity for GPIO LED 2013-06-19 04:38:14 -05:00
omap3-zoom3.dts ARM: dts: Add basic support for zoom3 2013-10-18 10:24:33 -07:00
omap3.dtsi Some more dts changes via Benoit Cousson <bcousson@baylibre.com>: 2013-10-28 14:47:50 -07:00
omap4-panda-a4.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-panda-common.dtsi ARM: dts: omap4-panda: add DPI pinmuxing 2013-10-29 14:24:34 -07:00
omap4-panda-es.dts ARM: dts: omap4-panda-es: Do not reset gpio1 2013-10-20 19:16:53 +02:00
omap4-panda.dts ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap4-sdp-es23plus.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-sdp.dts ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file 2013-10-08 17:51:41 +02:00
omap4-var-som.dts ARM: dts: OMAP4/5: Use existing constants for IRQs 2013-06-18 18:53:39 -05:00
omap4.dtsi Few device tree changes that fix boot time warnings and 2013-10-29 16:11:03 -07:00
omap5-uevm.dts ARM: dts: omap5-uevm: Remove pinmux for dmic pins 2013-10-23 11:40:47 +02:00
omap5.dtsi ARM: dts: OMAP5: Add hwspinlock node 2013-10-29 13:51:38 -07:00
omap34xx.dtsi ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap36xx.dtsi ARM: dts: Add missing reg, interrupt and dma entries for omap3 2013-10-22 05:34:49 -07:00
omap443x.dtsi ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices 2013-06-18 18:53:46 -05:00
omap2420-h4.dts ARM: dts: Remove '0x's from OMAP2420 H4 DTS file 2013-10-08 17:51:40 +02:00
omap2420.dtsi ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap2430.dtsi ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap3430-sdp.dts ARM: dts: Remove '0x's from OMAP3430 SDP DTS file 2013-10-08 17:51:41 +02:00
omap4460.dtsi ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices 2013-06-18 18:53:46 -05:00
omap-gpmc-smsc911x.dtsi ARM: dts: Shared file for omap GPMC connected smsc911x 2013-10-14 11:34:37 -07:00
omap-zoom-common.dtsi ARM: dts: Add basic support for zoom3 2013-10-18 10:24:33 -07:00
orion5x-lacie-ethernet-disk-mini-v2.dts ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes 2013-07-25 20:54:10 +00:00
orion5x.dtsi ARM: orion5x: update intc device tree node to new reg layout 2013-07-25 21:07:09 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi ARM: dts: picoxcell: cpus/cpu nodes dts updates 2013-05-23 10:45:15 +01:00
picoxcell-pc3x3.dtsi ARM: dts: picoxcell: cpus/cpu nodes dts updates 2013-05-23 10:45:15 +01:00
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
prima2-evb.dts
prima2.dtsi ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C 2013-10-29 12:40:58 -07:00
pxa2xx.dtsi ARM: dts: pxa2xx: cpus/cpu nodes dts updates 2013-05-23 10:45:17 +01:00
pxa3xx.dtsi ARM: pxa: DTS: override gpio node in pxa3xx.dtsi 2013-08-13 15:51:02 -07:00
pxa27x.dtsi
pxa168-aspenite.dts
pxa168.dtsi ARM: mmp: add more compatible names in gpio driver 2013-04-11 10:00:34 +08:00
pxa910-dkb.dts
pxa910.dtsi ARM: mmp: add more compatible names in gpio driver 2013-04-11 10:00:34 +08:00
r8a73a4-ape6evm-reference.dts ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards 2013-10-08 09:25:13 +09:00
r8a73a4-ape6evm.dts ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards 2013-10-08 09:25:13 +09:00
r8a73a4.dtsi Changes needed to prepare for making omap3 device tree only: 2013-10-14 15:29:24 -07:00
r8a7740-armadillo800eva-reference.dts ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces 2013-10-08 09:25:14 +09:00
r8a7740-armadillo800eva.dts ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs 2013-08-06 18:07:13 +09:00
r8a7740.dtsi ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces 2013-10-08 09:25:14 +09:00
r8a7778-bockw-reference.dts ARM: shmobile: bockw: fixup ether node naming 2013-10-08 10:37:49 +09:00
r8a7778-bockw.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
r8a7778.dtsi Changes needed to prepare for making omap3 device tree only: 2013-10-14 15:29:24 -07:00
r8a7779-marzen-reference.dts ARM: shmobile: marzen: fixup SMSC IRQ number on DTS 2013-10-08 09:25:22 +09:00
r8a7779-marzen.dts ARM: shmobile: marzen: Add r8a7779-marzen.dtb 2013-07-30 13:27:56 +09:00
r8a7779.dtsi Changes needed to prepare for making omap3 device tree only: 2013-10-14 15:29:24 -07:00
r8a7790-lager-reference.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
r8a7790-lager.dts ARM: shmobile: lager: enable nfsroot in DTS 2013-08-06 18:06:20 +09:00
r8a7790.dtsi Changes needed to prepare for making omap3 device tree only: 2013-10-14 15:29:24 -07:00
r8a7791.dtsi ARM: shmobile: r8a7791 SMP device tree node 2013-10-08 09:25:22 +09:00
rk3066a-clocks.dtsi arm: Add basic clocks for Rockchip rk3066a SoCs 2013-06-21 09:20:56 +02:00
rk3066a.dtsi arm: add basic support for Rockchip RK3066a boards 2013-06-21 09:21:02 +02:00
s3c24xx.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
s3c64xx-pinctrl.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s3c64xx.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s3c2416-pinctrl.dtsi ARM: dts: add devicetree support for s3c2416-smdk2416 2013-05-21 01:06:12 +09:00
s3c2416-smdk2416.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
s3c2416.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
s3c6400.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
s3c6410-mini6410.dts ARM: dts: Add dts file for S3C6410-based Mini6410 board 2013-09-17 06:48:29 +09:00
s3c6410-smdk6410.dts ARM: dts: Add dts file for S3C6410-based SMDK6410 board 2013-09-17 06:48:29 +09:00
s3c6410.dtsi ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs 2013-09-17 06:48:28 +09:00
sama5d3.dtsi ARM: at91/dt: sama5d3xek: reduce the ROM code mapping for pmecc lookup table 2013-08-23 14:47:22 +08:00
sama5d3xcm.dtsi ARM: at91/dt: sama5d3xek: remove the useless NFC dt parameters 2013-08-23 14:46:38 +08:00
sama5d3xdm.dtsi ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
sama5d3xmb.dtsi ARM: at91/dt: fix phy address in sama5xmb to match the reg property 2013-08-29 15:21:45 -04:00
sama5d31ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
sama5d33ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
sama5d34ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
sama5d35ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g-reference.dts ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards 2013-10-08 09:25:13 +09:00
sh73a0-kzm9g.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
sh73a0.dtsi Changes needed to prepare for making omap3 device tree only: 2013-10-14 15:29:24 -07:00
sh7372-mackerel.dts
sh7372.dtsi ARM: shmobile: sh7372: Add pin control device to device tree 2013-07-22 10:12:36 +09:00
skeleton64.dtsi ARM: dts: Fix memory node in skeleton64.dtsi 2013-08-07 16:33:50 +00:00
skeleton.dtsi
socfpga_arria5_socdk.dts dts: socfpga: Add support for Altera's SOCFPGA Arria V board 2013-10-09 16:58:31 -05:00
socfpga_arria5.dtsi dts: socfpga: Add support for Altera's SOCFPGA Arria V board 2013-10-09 16:58:31 -05:00
socfpga_cyclone5_socdk.dts ARM: socfpga: dts: Move common nodes to cyclone5 dtsi 2013-10-09 16:56:24 -05:00
socfpga_cyclone5_sockit.dts ARM: socfpga: dts: Add support for terasic SoCkit 2013-10-09 16:57:08 -05:00
socfpga_cyclone5.dtsi ARM: socfpga: dts: Move common nodes to cyclone5 dtsi 2013-10-09 16:56:24 -05:00
socfpga_vt.dts ARM: socfpga: dts: Add ethernet bindings for SOCFPGA 2013-06-11 16:34:57 -07:00
socfpga.dtsi ARM: socfpga: dts: fix s2f_* clock name 2013-10-09 16:58:19 -05:00
spear3xx.dtsi ARM: dts: spear: cpus/cpu nodes dts updates 2013-05-23 10:45:21 +01:00
spear13xx.dtsi ARM: dts: spear: cpus/cpu nodes dts updates 2013-05-23 10:45:21 +01:00
spear300-evb.dts
spear300.dtsi
spear310-evb.dts
spear310.dtsi
spear320-evb.dts
spear320-hmi.dts
spear320.dtsi
spear600-evb.dts
spear600.dtsi ARM: dts: spear: cpus/cpu nodes dts updates 2013-05-23 10:45:21 +01:00
spear1310-evb.dts
spear1310.dtsi
spear1340-evb.dts
spear1340.dtsi ARM: arm-soc: late cleanups 2013-05-07 11:22:14 -07:00
st-pincfg.h ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
ste-ccu8540-pinctrl.dtsi ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-ccu8540.dts ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-ccu9540.dts ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-dbx5x0.dtsi ARM: ux500: register all SSP and SPI blocks 2013-10-18 14:55:44 +02:00
ste-href-stuib.dtsi ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-href-tvk1281618.dtsi ARM: ux500: register the tc35892 GPIO on the TVK UIB 2013-10-03 10:18:36 +02:00
ste-href.dtsi ARM: ux500: move TC35892 at 0x42 to hrefprev60 2013-10-02 16:17:03 +02:00
ste-hrefprev60-stuib.dts ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-hrefprev60-tvk.dts ARM: ux500: split the HREF DTS files from two to four 2013-10-02 16:17:04 +02:00
ste-hrefprev60.dtsi ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-hrefv60plus-stuib.dts ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-hrefv60plus-tvk.dts ARM: ux500: split the HREF DTS files from two to four 2013-10-02 16:17:04 +02:00
ste-hrefv60plus.dtsi ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS 2013-10-03 10:29:24 +02:00
ste-nomadik-pinctrl.dtsi ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2 2013-08-06 23:48:50 +02:00
ste-nomadik-s8815.dts Nomadik DT and clock work: 2013-06-20 16:13:10 +02:00
ste-nomadik-stn8815.dtsi ARM: nomadik: switch to use the Nomadik I2C driver 2013-08-07 00:59:06 +02:00
ste-snowball.dts ARM: ux500: Enable CPUFreq on Snowball 2013-09-26 11:09:27 +02:00
ste-u300.dts ARM: u300: switch to using syscon regmap for board 2013-06-17 13:54:39 +02:00
stih41x-b2000.dtsi ARM: stih41x: Add B2000 board support 2013-06-25 13:42:50 -07:00
stih41x-b2020.dtsi ARM: stih41x: Add B2020 board support 2013-06-25 13:42:51 -07:00
stih41x.dtsi ARM: STi: Fix cpu nodes with correct device_type. 2013-08-04 13:40:48 -07:00
stih415-b2000.dts ARM: stih41x: Add B2000 board support 2013-06-25 13:42:50 -07:00
stih415-b2020.dts ARM: stih41x: Add B2020 board support 2013-06-25 13:42:51 -07:00
stih415-clock.dtsi ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
stih415-pinctrl.dtsi ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
stih415.dtsi ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
stih416-b2000.dts ARM: stih41x: Add B2000 board support 2013-06-25 13:42:50 -07:00
stih416-b2020.dts ARM: stih41x: Add B2020 board support 2013-06-25 13:42:51 -07:00
stih416-clock.dtsi ARM: sti: Add STiH416 SOC support 2013-06-25 13:26:58 -07:00
stih416-pinctrl.dtsi ARM: dts: STi: Fix pinconf setup for STiH416 serial2 2013-07-22 19:34:55 -07:00
stih416.dtsi ARM: dts: STi: Fix pinconf setup for STiH416 serial2 2013-07-22 19:34:55 -07:00
sun4i-a10-a1000.dts ARM: sunxi: dt: Add device tree for Mele A1000 2013-08-14 09:59:20 +02:00
sun4i-a10-cubieboard.dts ARM: sun4i: dt: Fix A10 SoC bus base address 2013-08-10 19:13:43 +02:00
sun4i-a10-hackberry.dts ARM: sun4i: dt: Fix A10 SoC bus base address 2013-08-10 19:13:43 +02:00
sun4i-a10-mini-xplus.dts ARM: sun4i: dt: Fix A10 SoC bus base address 2013-08-10 19:13:43 +02:00
sun4i-a10.dtsi ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i 2013-09-16 18:22:12 -05:00
sun5i-a10s-olinuxino-micro.dts ARM: sun5i: dt: Fix A10s SoC bus base address 2013-08-10 19:13:44 +02:00
sun5i-a10s.dtsi ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i 2013-09-16 18:22:12 -05:00
sun5i-a13-olinuxino.dts ARM: sun5i: dt: Fix A13 SoC bus base address 2013-08-10 19:13:45 +02:00
sun5i-a13.dtsi ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i 2013-09-16 18:22:12 -05:00
sun6i-a31-colombus.dts ARM: sun6i: colombus: Add uart0 muxing 2013-08-22 00:19:17 +02:00
sun6i-a31.dtsi ARM: sun6i: Fix the APB2 clock gates register size 2013-10-05 15:36:10 +02:00
sun7i-a20-cubieboard2.dts ARM: sun7i: cubieboard2: Enable the I2C controllers 2013-09-18 11:35:38 -05:00
sun7i-a20-cubietruck.dts ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck 2013-10-08 11:35:19 +02:00
sun7i-a20-olinuxino-micro.dts ARM: sun7i: olinuxino-micro: Enable the I2C controllers 2013-09-18 11:35:38 -05:00
sun7i-a20.dtsi ARM: sun7i: Add the pin muxing options for the I2C controllers 2013-09-18 11:35:37 -05:00
tegra20-colibri-512.dtsi ARM: tegra: device tree changes for 3.12 2013-08-20 16:30:54 -07:00
tegra20-harmony.dts ARM: tegra: harmony: Initialize PCIe from DT 2013-08-12 14:19:21 -06:00
tegra20-iris-512.dts ARM: tegra: convert device tree files to use GPIO defines 2013-05-28 16:13:49 -06:00
tegra20-medcom-wide.dts ARM: tegra20: convert device tree files to use CLK defines 2013-05-28 16:13:50 -06:00
tegra20-paz00.dts ARM: tegra: enable LP1 suspend mode 2013-08-12 12:23:14 -06:00
tegra20-plutux.dts ARM: tegra20: convert device tree files to use CLK defines 2013-05-28 16:13:50 -06:00
tegra20-seaboard.dts ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra20-tamonten.dtsi ARM: tegra: tamonten: Add PCIe support 2013-08-12 14:19:12 -06:00
tegra20-tec.dts ARM: tegra: tec: Add PCIe support 2013-08-12 14:19:16 -06:00
tegra20-trimslice.dts ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra20-ventana.dts ARM: tegra: enable LP1 suspend mode 2013-08-12 12:23:14 -06:00
tegra20-whistler.dts ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra20.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra30-beaver.dts ARM: tegra: add Mic Jack to Beaver device tree 2013-08-15 09:35:07 -06:00
tegra30-cardhu-a02.dts ARM: tegra: convert device tree files to use GPIO defines 2013-05-28 16:13:49 -06:00
tegra30-cardhu-a04.dts ARM: tegra: convert device tree files to use GPIO defines 2013-05-28 16:13:49 -06:00
tegra30-cardhu.dtsi ARM: tegra: add vcc supply for nct1008 to Cardhu 2013-10-07 13:17:35 -06:00
tegra30.dtsi ARM: tegra: Use symbolic names for gr3d clocks 2013-10-17 11:42:47 -06:00
tegra114-dalmore.dts ARM: tegra: add DT entry for nct1008 to Dalmore 2013-10-07 13:17:34 -06:00
tegra114.dtsi ARM: tegra: fix Tegra114 IOMMU register address 2013-10-30 17:38:27 -07:00
tegra124-venice2.dts ARM: tegra: enable LP1 suspend mode for Venice2 2013-10-11 12:32:17 -06:00
tegra124.dtsi ARM: tegra: add GPIO controller to tegra124.dtsi 2013-10-15 09:25:28 -06:00
tny_a9g20.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
tny_a9260_common.dtsi
tny_a9260.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
tny_a9263.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
tps6507x.dtsi ARM: regulator: add tps6507x device tree data 2013-04-03 09:44:51 +05:30
tps65217.dtsi
tps65910.dtsi
twl4030_omap3.dtsi ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line 2013-06-18 18:53:45 -05:00
twl4030.dtsi ARM: dts: TWL4030: Add power button support 2013-10-23 10:15:12 +02:00
twl6030_omap4.dtsi ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file 2013-10-08 17:51:41 +02:00
twl6030.dtsi ARM: dts: twl6030: Add PWM support 2013-04-09 00:16:50 +02:00
usb_a9g20_common.dtsi ARM: at91: dt: add Calao USB-A9G20 low power version 2013-05-31 16:52:37 +02:00
usb_a9g20_lpw.dts ARM: at91: dt: add Calao USB-A9G20 low power version 2013-05-31 16:52:37 +02:00
usb_a9g20-dab-mmx.dtsi ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
usb_a9g20.dts ARM: at91: dt: add Calao USB-A9G20 low power version 2013-05-31 16:52:37 +02:00
usb_a9260_common.dtsi ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
usb_a9260.dts ARM: at91: dt: usb-a9260: update shutdown controller 2013-05-31 16:52:35 +02:00
usb_a9263.dts ARM: at91: dt: usb-a9263: add dataflash support 2013-05-31 16:52:36 +02:00
versatile-ab.dts ARM: versatile: use OF init for sp804 timer 2013-04-11 15:11:21 -05:00
versatile-pb.dts
vexpress-v2m-rs1.dtsi
vexpress-v2m.dtsi
vexpress-v2p-ca5s.dts ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms 2013-04-11 03:01:03 -07:00
vexpress-v2p-ca9.dts ARM: dts: vexpress: disable CA9 core tile sp804 timer 2013-04-11 15:11:19 -05:00
vexpress-v2p-ca15_a7.dts ARM: SoC late changes for v3.12 2013-09-09 16:35:29 -07:00
vexpress-v2p-ca15-tc1.dts ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms 2013-04-11 03:01:03 -07:00
vf610-cosmic.dts ARM: dts: add initial VF610 Cosmic/Cosmic+ board support 2013-09-26 13:01:38 +08:00
vf610-pinfunc.h ARM: dts: add SoC level device tree source for VF610 2013-06-17 16:04:23 +08:00
vf610-twr.dts ARM: dts: vf610-twr: Enable DSPI0 devices and Flash at26df081a 2013-09-26 13:01:33 +08:00
vf610.dtsi ARM: dts: vf610: Add DSPI nodes 2013-09-26 13:01:33 +08:00
vt8500-bv07.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
vt8500.dtsi dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8505-ref.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8505.dtsi dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files 2013-05-12 20:31:15 +12:00
wm8650-mid.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8650.dtsi dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files 2013-05-12 20:31:15 +12:00
wm8750-apc8750.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8750.dtsi dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files 2013-05-12 20:31:15 +12:00
wm8850-w70v2.dts ARM: dts: Use the PWM polarity flags 2013-09-03 13:08:11 +02:00
wm8850.dtsi dts: vt8500: Correct reference clock on WM8850 SoCs 2013-06-04 07:31:22 +12:00
xenvm-4.2.dts xenvm: add a simple PSCI node and a second cpu 2013-04-25 16:46:09 +00:00
zynq-7000.dtsi arm: zynq: dt: Set correct L2 ram latencies 2013-08-13 16:37:35 +02:00
zynq-zc702.dts arm: dt: zynq: Use 'status' property for UART nodes 2013-06-17 10:32:39 +02:00
zynq-zc706.dts arm: dt: zynq: Add support for the zc706 platform 2013-06-17 10:32:51 +02:00
zynq-zed.dts arm: dt: zynq: Add support for the zed platform 2013-06-17 10:33:03 +02:00