forked from Minki/linux
9ca8f72a92
As things currently stand, traditional EFI boot loaders and the EFI boot stub are carrying essentially the same initialisation code required to setup an EFI machine for booting a kernel. There's really no need to have this code in two places and the hope is that, with this new protocol, initialisation and booting of the kernel can be left solely to the kernel's EFI boot stub. The responsibilities of the boot loader then become, o Loading the kernel image from boot media File system code still needs to be carried by boot loaders for the scenario where the kernel and initrd files reside on a file system that the EFI firmware doesn't natively understand, such as ext4, etc. o Providing a user interface Boot loaders still need to display any menus/interfaces, for example to allow the user to select from a list of kernels. Bump the boot protocol number because we added the 'handover_offset' field to indicate the location of the handover protocol entry point. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Jones <pjones@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Acked-and-Tested-by: Matthew Garrett <mjg@redhat.com> Link: http://lkml.kernel.org/r/1342689828-16815-1-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
382 lines
8.1 KiB
ArmAsm
382 lines
8.1 KiB
ArmAsm
/*
|
|
* linux/boot/head.S
|
|
*
|
|
* Copyright (C) 1991, 1992, 1993 Linus Torvalds
|
|
*/
|
|
|
|
/*
|
|
* head.S contains the 32-bit startup code.
|
|
*
|
|
* NOTE!!! Startup happens at absolute address 0x00001000, which is also where
|
|
* the page directory will exist. The startup code will be overwritten by
|
|
* the page directory. [According to comments etc elsewhere on a compressed
|
|
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
|
|
*
|
|
* Page 0 is deliberately kept safe, since System Management Mode code in
|
|
* laptops may need to access the BIOS data stored there. This is also
|
|
* useful for future device drivers that either access the BIOS via VM86
|
|
* mode.
|
|
*/
|
|
|
|
/*
|
|
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
|
|
*/
|
|
.code32
|
|
.text
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/segment.h>
|
|
#include <asm/pgtable_types.h>
|
|
#include <asm/page_types.h>
|
|
#include <asm/boot.h>
|
|
#include <asm/msr.h>
|
|
#include <asm/processor-flags.h>
|
|
#include <asm/asm-offsets.h>
|
|
|
|
__HEAD
|
|
.code32
|
|
ENTRY(startup_32)
|
|
cld
|
|
/*
|
|
* Test KEEP_SEGMENTS flag to see if the bootloader is asking
|
|
* us to not reload segments
|
|
*/
|
|
testb $(1<<6), BP_loadflags(%esi)
|
|
jnz 1f
|
|
|
|
cli
|
|
movl $(__KERNEL_DS), %eax
|
|
movl %eax, %ds
|
|
movl %eax, %es
|
|
movl %eax, %ss
|
|
1:
|
|
|
|
/*
|
|
* Calculate the delta between where we were compiled to run
|
|
* at and where we were actually loaded at. This can only be done
|
|
* with a short local call on x86. Nothing else will tell us what
|
|
* address we are running at. The reserved chunk of the real-mode
|
|
* data at 0x1e4 (defined as a scratch field) are used as the stack
|
|
* for this calculation. Only 4 bytes are needed.
|
|
*/
|
|
leal (BP_scratch+4)(%esi), %esp
|
|
call 1f
|
|
1: popl %ebp
|
|
subl $1b, %ebp
|
|
|
|
/* setup a stack and make sure cpu supports long mode. */
|
|
movl $boot_stack_end, %eax
|
|
addl %ebp, %eax
|
|
movl %eax, %esp
|
|
|
|
call verify_cpu
|
|
testl %eax, %eax
|
|
jnz no_longmode
|
|
|
|
/*
|
|
* Compute the delta between where we were compiled to run at
|
|
* and where the code will actually run at.
|
|
*
|
|
* %ebp contains the address we are loaded at by the boot loader and %ebx
|
|
* contains the address where we should move the kernel image temporarily
|
|
* for safe in-place decompression.
|
|
*/
|
|
|
|
#ifdef CONFIG_RELOCATABLE
|
|
movl %ebp, %ebx
|
|
movl BP_kernel_alignment(%esi), %eax
|
|
decl %eax
|
|
addl %eax, %ebx
|
|
notl %eax
|
|
andl %eax, %ebx
|
|
#else
|
|
movl $LOAD_PHYSICAL_ADDR, %ebx
|
|
#endif
|
|
|
|
/* Target address to relocate to for decompression */
|
|
addl $z_extract_offset, %ebx
|
|
|
|
/*
|
|
* Prepare for entering 64 bit mode
|
|
*/
|
|
|
|
/* Load new GDT with the 64bit segments using 32bit descriptor */
|
|
leal gdt(%ebp), %eax
|
|
movl %eax, gdt+2(%ebp)
|
|
lgdt gdt(%ebp)
|
|
|
|
/* Enable PAE mode */
|
|
movl $(X86_CR4_PAE), %eax
|
|
movl %eax, %cr4
|
|
|
|
/*
|
|
* Build early 4G boot pagetable
|
|
*/
|
|
/* Initialize Page tables to 0 */
|
|
leal pgtable(%ebx), %edi
|
|
xorl %eax, %eax
|
|
movl $((4096*6)/4), %ecx
|
|
rep stosl
|
|
|
|
/* Build Level 4 */
|
|
leal pgtable + 0(%ebx), %edi
|
|
leal 0x1007 (%edi), %eax
|
|
movl %eax, 0(%edi)
|
|
|
|
/* Build Level 3 */
|
|
leal pgtable + 0x1000(%ebx), %edi
|
|
leal 0x1007(%edi), %eax
|
|
movl $4, %ecx
|
|
1: movl %eax, 0x00(%edi)
|
|
addl $0x00001000, %eax
|
|
addl $8, %edi
|
|
decl %ecx
|
|
jnz 1b
|
|
|
|
/* Build Level 2 */
|
|
leal pgtable + 0x2000(%ebx), %edi
|
|
movl $0x00000183, %eax
|
|
movl $2048, %ecx
|
|
1: movl %eax, 0(%edi)
|
|
addl $0x00200000, %eax
|
|
addl $8, %edi
|
|
decl %ecx
|
|
jnz 1b
|
|
|
|
/* Enable the boot page tables */
|
|
leal pgtable(%ebx), %eax
|
|
movl %eax, %cr3
|
|
|
|
/* Enable Long mode in EFER (Extended Feature Enable Register) */
|
|
movl $MSR_EFER, %ecx
|
|
rdmsr
|
|
btsl $_EFER_LME, %eax
|
|
wrmsr
|
|
|
|
/*
|
|
* Setup for the jump to 64bit mode
|
|
*
|
|
* When the jump is performend we will be in long mode but
|
|
* in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
|
|
* (and in turn EFER.LMA = 1). To jump into 64bit mode we use
|
|
* the new gdt/idt that has __KERNEL_CS with CS.L = 1.
|
|
* We place all of the values on our mini stack so lret can
|
|
* used to perform that far jump.
|
|
*/
|
|
pushl $__KERNEL_CS
|
|
leal startup_64(%ebp), %eax
|
|
pushl %eax
|
|
|
|
/* Enter paged protected Mode, activating Long Mode */
|
|
movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */
|
|
movl %eax, %cr0
|
|
|
|
/* Jump from 32bit compatibility mode into 64bit mode. */
|
|
lret
|
|
ENDPROC(startup_32)
|
|
|
|
no_longmode:
|
|
/* This isn't an x86-64 CPU so hang */
|
|
1:
|
|
hlt
|
|
jmp 1b
|
|
|
|
#include "../../kernel/verify_cpu.S"
|
|
|
|
/*
|
|
* Be careful here startup_64 needs to be at a predictable
|
|
* address so I can export it in an ELF header. Bootloaders
|
|
* should look at the ELF header to find this address, as
|
|
* it may change in the future.
|
|
*/
|
|
.code64
|
|
.org 0x200
|
|
ENTRY(startup_64)
|
|
/*
|
|
* We come here either from startup_32 or directly from a
|
|
* 64bit bootloader. If we come here from a bootloader we depend on
|
|
* an identity mapped page table being provied that maps our
|
|
* entire text+data+bss and hopefully all of memory.
|
|
*/
|
|
#ifdef CONFIG_EFI_STUB
|
|
/*
|
|
* The entry point for the PE/COFF executable is 0x210, so only
|
|
* legacy boot loaders will execute this jmp.
|
|
*/
|
|
jmp preferred_addr
|
|
|
|
.org 0x210
|
|
mov %rcx, %rdi
|
|
mov %rdx, %rsi
|
|
pushq %rdi
|
|
pushq %rsi
|
|
call make_boot_params
|
|
cmpq $0,%rax
|
|
je 1f
|
|
mov %rax, %rdx
|
|
popq %rsi
|
|
popq %rdi
|
|
|
|
.org 0x230,0x90
|
|
call efi_main
|
|
movq %rax,%rsi
|
|
cmpq $0,%rax
|
|
jne 2f
|
|
1:
|
|
/* EFI init failed, so hang. */
|
|
hlt
|
|
jmp 1b
|
|
2:
|
|
call 3f
|
|
3:
|
|
popq %rax
|
|
subq $3b, %rax
|
|
subq BP_pref_address(%rsi), %rax
|
|
add BP_code32_start(%esi), %eax
|
|
leaq preferred_addr(%rax), %rax
|
|
jmp *%rax
|
|
|
|
preferred_addr:
|
|
#endif
|
|
|
|
/* Setup data segments. */
|
|
xorl %eax, %eax
|
|
movl %eax, %ds
|
|
movl %eax, %es
|
|
movl %eax, %ss
|
|
movl %eax, %fs
|
|
movl %eax, %gs
|
|
lldt %ax
|
|
movl $0x20, %eax
|
|
ltr %ax
|
|
|
|
/*
|
|
* Compute the decompressed kernel start address. It is where
|
|
* we were loaded at aligned to a 2M boundary. %rbp contains the
|
|
* decompressed kernel start address.
|
|
*
|
|
* If it is a relocatable kernel then decompress and run the kernel
|
|
* from load address aligned to 2MB addr, otherwise decompress and
|
|
* run the kernel from LOAD_PHYSICAL_ADDR
|
|
*
|
|
* We cannot rely on the calculation done in 32-bit mode, since we
|
|
* may have been invoked via the 64-bit entry point.
|
|
*/
|
|
|
|
/* Start with the delta to where the kernel will run at. */
|
|
#ifdef CONFIG_RELOCATABLE
|
|
leaq startup_32(%rip) /* - $startup_32 */, %rbp
|
|
movl BP_kernel_alignment(%rsi), %eax
|
|
decl %eax
|
|
addq %rax, %rbp
|
|
notq %rax
|
|
andq %rax, %rbp
|
|
#else
|
|
movq $LOAD_PHYSICAL_ADDR, %rbp
|
|
#endif
|
|
|
|
/* Target address to relocate to for decompression */
|
|
leaq z_extract_offset(%rbp), %rbx
|
|
|
|
/* Set up the stack */
|
|
leaq boot_stack_end(%rbx), %rsp
|
|
|
|
/* Zero EFLAGS */
|
|
pushq $0
|
|
popfq
|
|
|
|
/*
|
|
* Copy the compressed kernel to the end of our buffer
|
|
* where decompression in place becomes safe.
|
|
*/
|
|
pushq %rsi
|
|
leaq (_bss-8)(%rip), %rsi
|
|
leaq (_bss-8)(%rbx), %rdi
|
|
movq $_bss /* - $startup_32 */, %rcx
|
|
shrq $3, %rcx
|
|
std
|
|
rep movsq
|
|
cld
|
|
popq %rsi
|
|
|
|
/*
|
|
* Jump to the relocated address.
|
|
*/
|
|
leaq relocated(%rbx), %rax
|
|
jmp *%rax
|
|
|
|
.text
|
|
relocated:
|
|
|
|
/*
|
|
* Clear BSS (stack is currently empty)
|
|
*/
|
|
xorl %eax, %eax
|
|
leaq _bss(%rip), %rdi
|
|
leaq _ebss(%rip), %rcx
|
|
subq %rdi, %rcx
|
|
shrq $3, %rcx
|
|
rep stosq
|
|
|
|
/*
|
|
* Adjust our own GOT
|
|
*/
|
|
leaq _got(%rip), %rdx
|
|
leaq _egot(%rip), %rcx
|
|
1:
|
|
cmpq %rcx, %rdx
|
|
jae 2f
|
|
addq %rbx, (%rdx)
|
|
addq $8, %rdx
|
|
jmp 1b
|
|
2:
|
|
|
|
/*
|
|
* Do the decompression, and jump to the new kernel..
|
|
*/
|
|
pushq %rsi /* Save the real mode argument */
|
|
movq %rsi, %rdi /* real mode address */
|
|
leaq boot_heap(%rip), %rsi /* malloc area for uncompression */
|
|
leaq input_data(%rip), %rdx /* input_data */
|
|
movl $z_input_len, %ecx /* input_len */
|
|
movq %rbp, %r8 /* output target address */
|
|
call decompress_kernel
|
|
popq %rsi
|
|
|
|
/*
|
|
* Jump to the decompressed kernel.
|
|
*/
|
|
jmp *%rbp
|
|
|
|
.data
|
|
gdt:
|
|
.word gdt_end - gdt
|
|
.long gdt
|
|
.word 0
|
|
.quad 0x0000000000000000 /* NULL descriptor */
|
|
.quad 0x00af9a000000ffff /* __KERNEL_CS */
|
|
.quad 0x00cf92000000ffff /* __KERNEL_DS */
|
|
.quad 0x0080890000000000 /* TS descriptor */
|
|
.quad 0x0000000000000000 /* TS continued */
|
|
gdt_end:
|
|
|
|
/*
|
|
* Stack and heap for uncompression
|
|
*/
|
|
.bss
|
|
.balign 4
|
|
boot_heap:
|
|
.fill BOOT_HEAP_SIZE, 1, 0
|
|
boot_stack:
|
|
.fill BOOT_STACK_SIZE, 1, 0
|
|
boot_stack_end:
|
|
|
|
/*
|
|
* Space for page tables (not in .bss so not zeroed)
|
|
*/
|
|
.section ".pgtable","a",@nobits
|
|
.balign 4096
|
|
pgtable:
|
|
.fill 6*4096, 1, 0
|