linux/arch/powerpc/platforms
Timur Tabi 4c30c143f0 powerpc/85xx: Add support for P5040DS board
Add support for the Freescale P5040DS Reference Board ("Superhydra"), which
is similar to the P5020DS.  Features of the P5040 are listed below, but
not all of these features (e.g. DPAA networking) are currently supported.

Four P5040 single-threaded e5500 cores built
    Up to 2.4 GHz with 64-bit ISA support
    Three levels of instruction: user, supervisor, hypervisor
CoreNet platform cache (CPC)
    2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
 support Up to 1600MT/s
    Memory pre-fetch engine
DPAA incorporating acceleration for the following functions
    Packet parsing, classification, and distribution (FMAN)
    Queue management for scheduling, packet sequencing and
	congestion management (QMAN)
    Hardware buffer management for buffer allocation and
	de-allocation (BMAN)
    Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes
    20 lanes at up to 5 Gbps
    Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
    Two 10 Gbps Ethernet MACs
    Ten 1 Gbps Ethernet MACs
High-speed peripheral interfaces
    Two PCI Express 2.0/3.0 controllers
Additional peripheral interfaces
    Two serial ATA (SATA 2.0) controllers
    Two high-speed USB 2.0 controllers with integrated PHY
    Enhanced secure digital host controller (SD/MMC/eMMC)
    Enhanced serial peripheral interface (eSPI)
    Two I2C controllers
    Four UARTs
    Integrated flash controller supporting NAND and NOR flash
DMA
    Dual four channel
Support for hardware virtualization and partitioning enforcement
    Extra privileged level for hypervisor support
QorIQ Trust Architecture 1.1
    Secure boot, secure debug, tamper detection, volatile key storage

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12 14:57:07 -05:00
..
8xx Disintegrate asm/system.h for PowerPC 2012-03-28 18:30:02 +01:00
40x
44x powerpc: Fix assmption of end_of_DRAM() returns end address 2012-07-03 14:14:49 +10:00
52xx powerpc: Mark const init data with __initconst instead of __initdata 2012-04-02 14:00:03 +10:00
82xx powerpc/82xx: add SPI support for mgcoge 2012-07-10 07:07:20 -05:00
83xx powerpc/83xx: fix RGMII AC values workaround for km83xx 2012-07-10 07:07:20 -05:00
85xx powerpc/85xx: Add support for P5040DS board 2012-09-12 14:57:07 -05:00
86xx PCI changes for the 3.6 merge window: 2012-07-24 16:17:07 -07:00
512x irq_domain/powerpc: constify irq_domain_ops 2012-02-16 06:11:24 -07:00
amigaone
cell powerpc: Rework set_dabr so it can take a DABRX value as well 2012-09-10 09:59:10 +10:00
chrp powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flag 2012-02-23 10:50:00 +11:00
embedded6xx Disintegrate asm/system.h for PowerPC 2012-03-28 18:30:02 +01:00
maple Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
pasemi powerpc: Remove all includes of <asm/abs_addr.h> 2012-09-05 15:19:33 +10:00
powermac Merge branch 'merge' into next 2012-05-09 10:57:57 +10:00
powernv powerpc/iommu: Add ppc_md.tce_get() callback for use by VFIO 2012-09-10 14:36:17 +10:00
prep
ps3 powerpc: Rework set_dabr so it can take a DABRX value as well 2012-09-10 09:59:10 +10:00
pseries powerpc: Dynamically calculate the dabrx based on kernel/user/hypervisor 2012-09-10 09:59:13 +10:00
wsp Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
fsl_uli1575.c Disintegrate asm/system.h for PowerPC 2012-03-28 18:30:02 +01:00
Kconfig KVM: PPC: Factor out guest epapr initialization 2012-05-30 11:43:10 +02:00
Kconfig.cputype powerpc/e500: add paravirt QEMU platform 2012-07-11 07:49:36 -05:00
Makefile powerpc: Remove the main legacy iSerie platform code 2012-03-09 10:35:11 +11:00