linux/drivers/net/ethernet/amd/au1000_eth.h
Jeff Kirsher b955f6ca77 amd: Move AMD (Lance) chipset drivers
Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/
and the necessary Kconfig and Makfile changes.

The au1000 (Alchemy) driver was also moved into the same directory
even though it is not a "Lance" driver.

CC: Peter Maydell <pmaydell@chiark.greenend.org.uk>
CC: Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Donald Becker <becker@scyld.com>
CC: Sam Creasey <sammy@users.qual.net>
CC: Miguel de Icaza <miguel@nuclecu.unam.mx>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Don Fry <pcnet32@frontier.com>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: David Davies <davies@maniac.ultranet.com>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Pete Popov <ppopov@embeddedalley.com>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: "Roger C. Pao" <rpao@paonet.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-10 19:54:11 -07:00

135 lines
3.0 KiB
C

/*
*
* Alchemy Au1x00 ethernet driver include file
*
* Author: Pete Popov <ppopov@mvista.com>
*
* Copyright 2001 MontaVista Software Inc.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#define MAC_IOSIZE 0x10000
#define NUM_RX_DMA 4 /* Au1x00 has 4 rx hardware descriptors */
#define NUM_TX_DMA 4 /* Au1x00 has 4 tx hardware descriptors */
#define NUM_RX_BUFFS 4
#define NUM_TX_BUFFS 4
#define MAX_BUF_SIZE 2048
#define ETH_TX_TIMEOUT (HZ/4)
#define MAC_MIN_PKT_SIZE 64
#define MULTICAST_FILTER_LIMIT 64
/*
* Data Buffer Descriptor. Data buffers must be aligned on 32 byte
* boundary for both, receive and transmit.
*/
struct db_dest {
struct db_dest *pnext;
u32 *vaddr;
dma_addr_t dma_addr;
};
/*
* The transmit and receive descriptors are memory
* mapped registers.
*/
struct tx_dma {
u32 status;
u32 buff_stat;
u32 len;
u32 pad;
};
struct rx_dma {
u32 status;
u32 buff_stat;
u32 pad[2];
};
/*
* MAC control registers, memory mapped.
*/
struct mac_reg {
u32 control;
u32 mac_addr_high;
u32 mac_addr_low;
u32 multi_hash_high;
u32 multi_hash_low;
u32 mii_control;
u32 mii_data;
u32 flow_control;
u32 vlan1_tag;
u32 vlan2_tag;
};
struct au1000_private {
struct db_dest *pDBfree;
struct db_dest db[NUM_RX_BUFFS+NUM_TX_BUFFS];
struct rx_dma *rx_dma_ring[NUM_RX_DMA];
struct tx_dma *tx_dma_ring[NUM_TX_DMA];
struct db_dest *rx_db_inuse[NUM_RX_DMA];
struct db_dest *tx_db_inuse[NUM_TX_DMA];
u32 rx_head;
u32 tx_head;
u32 tx_tail;
u32 tx_full;
int mac_id;
int mac_enabled; /* whether MAC is currently enabled and running
* (req. for mdio)
*/
int old_link; /* used by au1000_adjust_link */
int old_speed;
int old_duplex;
struct phy_device *phy_dev;
struct mii_bus *mii_bus;
/* PHY configuration */
int phy_static_config;
int phy_search_highest_addr;
int phy1_search_mac0;
int phy_addr;
int phy_busid;
int phy_irq;
/* These variables are just for quick access
* to certain regs addresses.
*/
struct mac_reg *mac; /* mac registers */
u32 *enable; /* address of MAC Enable Register */
u32 vaddr; /* virtual address of rx/tx buffers */
dma_addr_t dma_addr; /* dma address of rx/tx buffers */
spinlock_t lock; /* Serialise access to device */
u32 msg_enable;
};