forked from Minki/linux
8d3e5b9c1f
Add support for the lpass clock controller found on SDM845 based devices. This would allow lpass peripheral loader drivers to control the clocks to bring the subsystem out of reset. LPASS clocks present on the global clock controller would be registered with the clock framework based on the protected-clock flag. Also do not gate these clocks if they are left unused, as the lpass clocks require the global clock controller lpass clocks to be enabled before they are accessed. Mark the GCC lpass clocks as CRITICAL, for the LPASS clock access. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
180 lines
4.3 KiB
C
180 lines
4.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
|
|
|
|
#include "clk-regmap.h"
|
|
#include "clk-branch.h"
|
|
#include "common.h"
|
|
|
|
static struct clk_branch lpass_q6ss_ahbm_aon_clk = {
|
|
.halt_reg = 0x12000,
|
|
.halt_check = BRANCH_VOTED,
|
|
.clkr = {
|
|
.enable_reg = 0x12000,
|
|
.enable_mask = BIT(0),
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "lpass_q6ss_ahbm_aon_clk",
|
|
.ops = &clk_branch2_ops,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct clk_branch lpass_q6ss_ahbs_aon_clk = {
|
|
.halt_reg = 0x1f000,
|
|
.halt_check = BRANCH_VOTED,
|
|
.clkr = {
|
|
.enable_reg = 0x1f000,
|
|
.enable_mask = BIT(0),
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "lpass_q6ss_ahbs_aon_clk",
|
|
.ops = &clk_branch2_ops,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct clk_branch lpass_qdsp6ss_core_clk = {
|
|
.halt_reg = 0x20,
|
|
/* CLK_OFF would not toggle until LPASS is out of reset */
|
|
.halt_check = BRANCH_HALT_SKIP,
|
|
.clkr = {
|
|
.enable_reg = 0x20,
|
|
.enable_mask = BIT(0),
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "lpass_qdsp6ss_core_clk",
|
|
.ops = &clk_branch2_ops,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct clk_branch lpass_qdsp6ss_xo_clk = {
|
|
.halt_reg = 0x38,
|
|
/* CLK_OFF would not toggle until LPASS is out of reset */
|
|
.halt_check = BRANCH_HALT_SKIP,
|
|
.clkr = {
|
|
.enable_reg = 0x38,
|
|
.enable_mask = BIT(0),
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "lpass_qdsp6ss_xo_clk",
|
|
.ops = &clk_branch2_ops,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct clk_branch lpass_qdsp6ss_sleep_clk = {
|
|
.halt_reg = 0x3c,
|
|
/* CLK_OFF would not toggle until LPASS is out of reset */
|
|
.halt_check = BRANCH_HALT_SKIP,
|
|
.clkr = {
|
|
.enable_reg = 0x3c,
|
|
.enable_mask = BIT(0),
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "lpass_qdsp6ss_sleep_clk",
|
|
.ops = &clk_branch2_ops,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regmap_config lpass_regmap_config = {
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
.fast_io = true,
|
|
};
|
|
|
|
static struct clk_regmap *lpass_cc_sdm845_clocks[] = {
|
|
[LPASS_Q6SS_AHBM_AON_CLK] = &lpass_q6ss_ahbm_aon_clk.clkr,
|
|
[LPASS_Q6SS_AHBS_AON_CLK] = &lpass_q6ss_ahbs_aon_clk.clkr,
|
|
};
|
|
|
|
static const struct qcom_cc_desc lpass_cc_sdm845_desc = {
|
|
.config = &lpass_regmap_config,
|
|
.clks = lpass_cc_sdm845_clocks,
|
|
.num_clks = ARRAY_SIZE(lpass_cc_sdm845_clocks),
|
|
};
|
|
|
|
static struct clk_regmap *lpass_qdsp6ss_sdm845_clocks[] = {
|
|
[LPASS_QDSP6SS_XO_CLK] = &lpass_qdsp6ss_xo_clk.clkr,
|
|
[LPASS_QDSP6SS_SLEEP_CLK] = &lpass_qdsp6ss_sleep_clk.clkr,
|
|
[LPASS_QDSP6SS_CORE_CLK] = &lpass_qdsp6ss_core_clk.clkr,
|
|
};
|
|
|
|
static const struct qcom_cc_desc lpass_qdsp6ss_sdm845_desc = {
|
|
.config = &lpass_regmap_config,
|
|
.clks = lpass_qdsp6ss_sdm845_clocks,
|
|
.num_clks = ARRAY_SIZE(lpass_qdsp6ss_sdm845_clocks),
|
|
};
|
|
|
|
static int lpass_clocks_sdm845_probe(struct platform_device *pdev, int index,
|
|
const struct qcom_cc_desc *desc)
|
|
{
|
|
struct regmap *regmap;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, index);
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
regmap = devm_regmap_init_mmio(&pdev->dev, base, desc->config);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
return qcom_cc_really_probe(pdev, desc, regmap);
|
|
}
|
|
|
|
static int lpass_cc_sdm845_probe(struct platform_device *pdev)
|
|
{
|
|
const struct qcom_cc_desc *desc;
|
|
int ret;
|
|
|
|
lpass_regmap_config.name = "cc";
|
|
desc = &lpass_cc_sdm845_desc;
|
|
|
|
ret = lpass_clocks_sdm845_probe(pdev, 0, desc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lpass_regmap_config.name = "qdsp6ss";
|
|
desc = &lpass_qdsp6ss_sdm845_desc;
|
|
|
|
return lpass_clocks_sdm845_probe(pdev, 1, desc);
|
|
}
|
|
|
|
static const struct of_device_id lpass_cc_sdm845_match_table[] = {
|
|
{ .compatible = "qcom,sdm845-lpasscc" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lpass_cc_sdm845_match_table);
|
|
|
|
static struct platform_driver lpass_cc_sdm845_driver = {
|
|
.probe = lpass_cc_sdm845_probe,
|
|
.driver = {
|
|
.name = "sdm845-lpasscc",
|
|
.of_match_table = lpass_cc_sdm845_match_table,
|
|
},
|
|
};
|
|
|
|
static int __init lpass_cc_sdm845_init(void)
|
|
{
|
|
return platform_driver_register(&lpass_cc_sdm845_driver);
|
|
}
|
|
subsys_initcall(lpass_cc_sdm845_init);
|
|
|
|
static void __exit lpass_cc_sdm845_exit(void)
|
|
{
|
|
platform_driver_unregister(&lpass_cc_sdm845_driver);
|
|
}
|
|
module_exit(lpass_cc_sdm845_exit);
|
|
|
|
MODULE_DESCRIPTION("QTI LPASS_CC SDM845 Driver");
|
|
MODULE_LICENSE("GPL v2");
|