forked from Minki/linux
4a6cd43fb7
The "mentor,musb" binding isn't documented so I was about to document it. The node is missing a few properties for configuration like "multipoint", "dyn_fifo", "num_eps" or "ram_bits". However I am not sure "missing" is the right word here because some of those informations might be obtained from the chip itself but it is not done (yet). Further the ePARP 2.3.1 says the matching goes from left to right taking the fist match. Right now there is jus a driver for "stericsson,db8500-musb" and none for "mentor,musb". I'm not 100% that it is simply possible to have a generic since even for DMA we have ifdefs in the driver between "generic mentor dma" and "ux500 dma" and I mean within musb and not the dma code. For that reason (that I am not sure a generic musb binding is possible and how its binding / required properties will look like) and the reason that we have here a minor binding without a driver to look at I suggest to remove that binding. If the majority of people prefer to keep this binding I'm curious how the documentation of the binding should look like. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
804 lines
20 KiB
Plaintext
804 lines
20 KiB
Plaintext
/*
|
|
* Copyright 2012 Linaro Ltd
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "stericsson,db8500";
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
intc: interrupt-controller@a0411000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
interrupt-controller;
|
|
reg = <0xa0411000 0x1000>,
|
|
<0xa0410100 0x100>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xa0412000 0x1000>;
|
|
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
timer@a0410600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xa0410600 0x20>;
|
|
interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
|
|
};
|
|
|
|
rtc@80154000 {
|
|
compatible = "arm,rtc-pl031", "arm,primecell";
|
|
reg = <0x80154000 0x1000>;
|
|
interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
gpio0: gpio@8012e000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8012e000 0x80>;
|
|
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <0>;
|
|
};
|
|
|
|
gpio1: gpio@8012e080 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8012e080 0x80>;
|
|
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <1>;
|
|
};
|
|
|
|
gpio2: gpio@8000e000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e000 0x80>;
|
|
interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <2>;
|
|
};
|
|
|
|
gpio3: gpio@8000e080 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e080 0x80>;
|
|
interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <3>;
|
|
};
|
|
|
|
gpio4: gpio@8000e100 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e100 0x80>;
|
|
interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <4>;
|
|
};
|
|
|
|
gpio5: gpio@8000e180 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8000e180 0x80>;
|
|
interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <5>;
|
|
};
|
|
|
|
gpio6: gpio@8011e000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8011e000 0x80>;
|
|
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <6>;
|
|
};
|
|
|
|
gpio7: gpio@8011e080 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0x8011e080 0x80>;
|
|
interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <7>;
|
|
};
|
|
|
|
gpio8: gpio@a03fe000 {
|
|
compatible = "stericsson,db8500-gpio",
|
|
"st,nomadik-gpio";
|
|
reg = <0xa03fe000 0x80>;
|
|
interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
st,supports-sleepmode;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <8>;
|
|
};
|
|
|
|
pinctrl {
|
|
compatible = "stericsson,db8500-pinctrl";
|
|
prcm = <&prcmu>;
|
|
};
|
|
|
|
usb_per5@a03e0000 {
|
|
compatible = "stericsson,db8500-musb";
|
|
reg = <0xa03e0000 0x10000>;
|
|
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "mc";
|
|
|
|
dr_mode = "otg";
|
|
|
|
dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 38 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 37 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 37 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 36 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 36 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 19 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 19 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 18 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 18 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 17 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 17 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 16 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 16 0 0x0>, /* Logical - MemToDev */
|
|
<&dma 39 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 39 0 0x0>; /* Logical - MemToDev */
|
|
|
|
dma-names = "iep_1_9", "oep_1_9",
|
|
"iep_2_10", "oep_2_10",
|
|
"iep_3_11", "oep_3_11",
|
|
"iep_4_12", "oep_4_12",
|
|
"iep_5_13", "oep_5_13",
|
|
"iep_6_14", "oep_6_14",
|
|
"iep_7_15", "oep_7_15",
|
|
"iep_8", "oep_8";
|
|
};
|
|
|
|
dma: dma-controller@801C0000 {
|
|
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
|
|
reg = <0x801C0000 0x1000 0x40010000 0x800>;
|
|
reg-names = "base", "lcpa";
|
|
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#dma-cells = <3>;
|
|
memcpy-channels = <56 57 58 59 60>;
|
|
};
|
|
|
|
prcmu: prcmu@80157000 {
|
|
compatible = "stericsson,db8500-prcmu";
|
|
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
|
|
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
|
|
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ranges;
|
|
|
|
prcmu-timer-4@80157450 {
|
|
compatible = "stericsson,db8500-prcmu-timer-4";
|
|
reg = <0x80157450 0xC>;
|
|
};
|
|
|
|
thermal@801573c0 {
|
|
compatible = "stericsson,db8500-thermal";
|
|
reg = <0x801573c0 0x40>;
|
|
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
|
|
<22 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
|
|
status = "disabled";
|
|
};
|
|
|
|
db8500-prcmu-regulators {
|
|
compatible = "stericsson,db8500-prcmu-regulator";
|
|
|
|
// DB8500_REGULATOR_VAPE
|
|
db8500_vape_reg: db8500_vape {
|
|
regulator-compatible = "db8500_vape";
|
|
regulator-always-on;
|
|
};
|
|
|
|
// DB8500_REGULATOR_VARM
|
|
db8500_varm_reg: db8500_varm {
|
|
regulator-compatible = "db8500_varm";
|
|
};
|
|
|
|
// DB8500_REGULATOR_VMODEM
|
|
db8500_vmodem_reg: db8500_vmodem {
|
|
regulator-compatible = "db8500_vmodem";
|
|
};
|
|
|
|
// DB8500_REGULATOR_VPLL
|
|
db8500_vpll_reg: db8500_vpll {
|
|
regulator-compatible = "db8500_vpll";
|
|
};
|
|
|
|
// DB8500_REGULATOR_VSMPS1
|
|
db8500_vsmps1_reg: db8500_vsmps1 {
|
|
regulator-compatible = "db8500_vsmps1";
|
|
};
|
|
|
|
// DB8500_REGULATOR_VSMPS2
|
|
db8500_vsmps2_reg: db8500_vsmps2 {
|
|
regulator-compatible = "db8500_vsmps2";
|
|
};
|
|
|
|
// DB8500_REGULATOR_VSMPS3
|
|
db8500_vsmps3_reg: db8500_vsmps3 {
|
|
regulator-compatible = "db8500_vsmps3";
|
|
};
|
|
|
|
// DB8500_REGULATOR_VRF1
|
|
db8500_vrf1_reg: db8500_vrf1 {
|
|
regulator-compatible = "db8500_vrf1";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SVAMMDSP
|
|
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
|
|
regulator-compatible = "db8500_sva_mmdsp";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
|
|
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
|
|
regulator-compatible = "db8500_sva_mmdsp_ret";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SVAPIPE
|
|
db8500_sva_pipe_reg: db8500_sva_pipe {
|
|
regulator-compatible = "db8500_sva_pipe";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SIAMMDSP
|
|
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
|
|
regulator-compatible = "db8500_sia_mmdsp";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
|
|
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SIAPIPE
|
|
db8500_sia_pipe_reg: db8500_sia_pipe {
|
|
regulator-compatible = "db8500_sia_pipe";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_SGA
|
|
db8500_sga_reg: db8500_sga {
|
|
regulator-compatible = "db8500_sga";
|
|
vin-supply = <&db8500_vape_reg>;
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
|
|
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
|
|
regulator-compatible = "db8500_b2r2_mcde";
|
|
vin-supply = <&db8500_vape_reg>;
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM12
|
|
db8500_esram12_reg: db8500_esram12 {
|
|
regulator-compatible = "db8500_esram12";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM12RET
|
|
db8500_esram12_ret_reg: db8500_esram12_ret {
|
|
regulator-compatible = "db8500_esram12_ret";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM34
|
|
db8500_esram34_reg: db8500_esram34 {
|
|
regulator-compatible = "db8500_esram34";
|
|
};
|
|
|
|
// DB8500_REGULATOR_SWITCH_ESRAM34RET
|
|
db8500_esram34_ret_reg: db8500_esram34_ret {
|
|
regulator-compatible = "db8500_esram34_ret";
|
|
};
|
|
};
|
|
|
|
ab8500 {
|
|
compatible = "stericsson,ab8500";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
ab8500_gpio: ab8500-gpio {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
ab8500-rtc {
|
|
compatible = "stericsson,ab8500-rtc";
|
|
interrupts = <17 IRQ_TYPE_LEVEL_HIGH
|
|
18 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "60S", "ALARM";
|
|
};
|
|
|
|
ab8500-gpadc {
|
|
compatible = "stericsson,ab8500-gpadc";
|
|
interrupts = <32 IRQ_TYPE_LEVEL_HIGH
|
|
39 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "HW_CONV_END", "SW_CONV_END";
|
|
vddadc-supply = <&ab8500_ldo_tvout_reg>;
|
|
};
|
|
|
|
ab8500_battery: ab8500_battery {
|
|
stericsson,battery-type = "LIPO";
|
|
thermistor-on-batctrl;
|
|
};
|
|
|
|
ab8500_fg {
|
|
compatible = "stericsson,ab8500-fg";
|
|
battery = <&ab8500_battery>;
|
|
};
|
|
|
|
ab8500_btemp {
|
|
compatible = "stericsson,ab8500-btemp";
|
|
battery = <&ab8500_battery>;
|
|
};
|
|
|
|
ab8500_charger {
|
|
compatible = "stericsson,ab8500-charger";
|
|
battery = <&ab8500_battery>;
|
|
vddadc-supply = <&ab8500_ldo_tvout_reg>;
|
|
};
|
|
|
|
ab8500_chargalg {
|
|
compatible = "stericsson,ab8500-chargalg";
|
|
battery = <&ab8500_battery>;
|
|
};
|
|
|
|
ab8500_usb {
|
|
compatible = "stericsson,ab8500-usb";
|
|
interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
|
|
96 IRQ_TYPE_LEVEL_HIGH
|
|
14 IRQ_TYPE_LEVEL_HIGH
|
|
15 IRQ_TYPE_LEVEL_HIGH
|
|
79 IRQ_TYPE_LEVEL_HIGH
|
|
74 IRQ_TYPE_LEVEL_HIGH
|
|
75 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "ID_WAKEUP_R",
|
|
"ID_WAKEUP_F",
|
|
"VBUS_DET_F",
|
|
"VBUS_DET_R",
|
|
"USB_LINK_STATUS",
|
|
"USB_ADP_PROBE_PLUG",
|
|
"USB_ADP_PROBE_UNPLUG";
|
|
vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
musb_1v8-supply = <&db8500_vsmps2_reg>;
|
|
};
|
|
|
|
ab8500-ponkey {
|
|
compatible = "stericsson,ab8500-poweron-key";
|
|
interrupts = <6 IRQ_TYPE_LEVEL_HIGH
|
|
7 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
|
|
};
|
|
|
|
ab8500-sysctrl {
|
|
compatible = "stericsson,ab8500-sysctrl";
|
|
};
|
|
|
|
ab8500-pwm {
|
|
compatible = "stericsson,ab8500-pwm";
|
|
};
|
|
|
|
ab8500-debugfs {
|
|
compatible = "stericsson,ab8500-debug";
|
|
};
|
|
|
|
codec: ab8500-codec {
|
|
compatible = "stericsson,ab8500-codec";
|
|
|
|
V-AUD-supply = <&ab8500_ldo_audio_reg>;
|
|
V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
|
|
V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
|
|
V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
|
|
|
|
stericsson,earpeice-cmv = <950>; /* Units in mV. */
|
|
};
|
|
|
|
ext_regulators: ab8500-ext-regulators {
|
|
compatible = "stericsson,ab8500-ext-regulator";
|
|
|
|
ab8500_ext1_reg: ab8500_ext1 {
|
|
regulator-compatible = "ab8500_ext1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ab8500_ext2_reg: ab8500_ext2 {
|
|
regulator-compatible = "ab8500_ext2";
|
|
regulator-min-microvolt = <1360000>;
|
|
regulator-max-microvolt = <1360000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ab8500_ext3_reg: ab8500_ext3 {
|
|
regulator-compatible = "ab8500_ext3";
|
|
regulator-min-microvolt = <3400000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
ab8500-regulators {
|
|
compatible = "stericsson,ab8500-regulator";
|
|
vin-supply = <&ab8500_ext3_reg>;
|
|
|
|
// supplies to the display/camera
|
|
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
|
|
regulator-compatible = "ab8500_ldo_aux1";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-boot-on;
|
|
/* BUG: If turned off MMC will be affected. */
|
|
regulator-always-on;
|
|
};
|
|
|
|
// supplies to the on-board eMMC
|
|
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
|
|
regulator-compatible = "ab8500_ldo_aux2";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
// supply for VAUX3; SDcard slots
|
|
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
|
|
regulator-compatible = "ab8500_ldo_aux3";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
// supply for v-intcore12; VINTCORE12 LDO
|
|
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
|
|
regulator-compatible = "ab8500_ldo_intcore";
|
|
};
|
|
|
|
// supply for tvout; gpadc; TVOUT LDO
|
|
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
|
|
regulator-compatible = "ab8500_ldo_tvout";
|
|
};
|
|
|
|
// supply for ab8500-usb; USB LDO
|
|
ab8500_ldo_usb_reg: ab8500_ldo_usb {
|
|
regulator-compatible = "ab8500_ldo_usb";
|
|
};
|
|
|
|
// supply for ab8500-vaudio; VAUDIO LDO
|
|
ab8500_ldo_audio_reg: ab8500_ldo_audio {
|
|
regulator-compatible = "ab8500_ldo_audio";
|
|
};
|
|
|
|
// supply for v-anamic1 VAMIC1 LDO
|
|
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
|
|
regulator-compatible = "ab8500_ldo_anamic1";
|
|
};
|
|
|
|
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
|
|
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
|
|
regulator-compatible = "ab8500_ldo_anamic2";
|
|
};
|
|
|
|
// supply for v-dmic; VDMIC LDO
|
|
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
|
|
regulator-compatible = "ab8500_ldo_dmic";
|
|
};
|
|
|
|
// supply for U8500 CSI/DSI; VANA LDO
|
|
ab8500_ldo_ana_reg: ab8500_ldo_ana {
|
|
regulator-compatible = "ab8500_ldo_ana";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@80004000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80004000 0x1000>;
|
|
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
i2c@80122000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80122000 0x1000>;
|
|
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
i2c@80128000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80128000 0x1000>;
|
|
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
i2c@80110000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x80110000 0x1000>;
|
|
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
i2c@8012a000 {
|
|
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x8012a000 0x1000>;
|
|
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
v-i2c-supply = <&db8500_vape_reg>;
|
|
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
ssp@80002000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x80002000 0x1000>;
|
|
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart@80120000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x80120000 0x1000>;
|
|
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 13 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart@80121000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x80121000 0x1000>;
|
|
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 12 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart@80007000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x80007000 0x1000>;
|
|
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 11 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi0_per1@80126000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80126000 0x1000>;
|
|
interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 29 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi1_per2@80118000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80118000 0x1000>;
|
|
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 32 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi2_per3@80005000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80005000 0x1000>;
|
|
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 28 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi3_per2@80119000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80119000 0x1000>;
|
|
interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi4_per2@80114000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80114000 0x1000>;
|
|
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
|
|
<&dma 42 0 0x0>; /* Logical - MemToDev */
|
|
dma-names = "rx", "tx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sdi5_per3@80008000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x80008000 0x1000>;
|
|
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msp0: msp@80123000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80123000 0x1000>;
|
|
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msp1: msp@80124000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80124000 0x1000>;
|
|
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
// HDMI sound
|
|
msp2: msp@80117000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80117000 0x1000>;
|
|
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msp3: msp@80125000 {
|
|
compatible = "stericsson,ux500-msp-i2s";
|
|
reg = <0x80125000 0x1000>;
|
|
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
external-bus@50000000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x50000000 0x4000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x50000000 0x4000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cpufreq-cooling {
|
|
compatible = "stericsson,db8500-cpufreq-cooling";
|
|
status = "disabled";
|
|
};
|
|
|
|
vmmci: regulator-gpio {
|
|
compatible = "regulator-gpio";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-name = "mmci-reg";
|
|
regulator-type = "voltage";
|
|
|
|
startup-delay-us = <100>;
|
|
enable-active-high;
|
|
|
|
states = <1800000 0x1
|
|
2900000 0x0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
cryp@a03cb000 {
|
|
compatible = "stericsson,ux500-cryp";
|
|
reg = <0xa03cb000 0x1000>;
|
|
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
};
|
|
|
|
hash@a03c2000 {
|
|
compatible = "stericsson,ux500-hash";
|
|
reg = <0xa03c2000 0x1000>;
|
|
|
|
v-ape-supply = <&db8500_vape_reg>;
|
|
};
|
|
};
|
|
};
|